Problems with networking small office... !!!

Similar Questions

• Problems with config Small Business switch

  Hi, I know that if I read the documentation I will come for answers, but I'd really like some input from someone with more knowledge than me. I have a problem with Cisco SF300, one of the Small Business switches. I have a single interface on my router and I need to separate my internal networks, I thought that one way would be to use VLANs. On my two internal networks a network has D-Link unmanaged switches, the other has the Cisco SF300 I did as follows.

  On the Cisco Switch, all of the default ports for ports of junction. I changed FE1-FE24 and GE1-2 to access ports.

  Created two VLAN and placed FE1-FE24 in VLAN10 (also my management VLAN), GE3 is a trunk Port for unidentified VLAN20, VLAN 20 uplinks to my DiLink switches. This way my unmanaged switches traffic arrives on a trunk on VLAN20 untagged port.

  GE4 is a trunk port and I assigned to VLAN1 untagged, tag VLAN10 VLAN20 tag and. 10 of VLANS and VLAN 20 then to my router.

  The plan was to connect GE4 to my router, but I had two things happen that I can't explain.

  All first as soon as I connected my D-Link to GE3 LAN on VLAN20 came down, I couldn't ping servers from computers etc, all devices are connected to the D-links unmanaged. Secondly, the responsibilities of VLAN changed on GE3 GE4, VLAN 10 and 20 disappeared and only the VLAN by default was assigned, also under settings VLAN my state of interface VLAN for VLAN20 shows people with reduced mobility. One of my FE12 continues also to change VLAN access ports.

  Can anyone offer any suggestions as to what might have crushed the LAN and why change my VLAN. I wrote my config running at startup configuration incidentally.

  I added two screenshots.

  Seriously, I'd appreciate the help.

  Thank you

  Bob

  Hi Bob,

  Could you please post a topology? I can help with this, but it would be much easier that I could see your network.

  Thanks in advance,

  Garrett

• Regarding the problem with network controllers

  Hello every1!
  
  I had a problem with the network controllers. I recently installed new windows in my laptop. Ultimate(64-bit) Windows 7 is. Everything was fine, except the LAN drivers. I got a drivers pack solution for drivers. We updated all the drivers except the network controller.

  When I bought my new hp Pavilion g6-1201tx a few years, I had a backup of my DVD players. But, due to virus attack, it has corrupted me n later when I tried to reinstall my windows, I had no option but to the install from the cd of windows 7.

  Now, my problem is that in the notification of networks, it shows that "network controller not installed driver. Even my bluetooth does not detect my wifi personal connection he used to before you reinstall windows. I am not able to find the appropriate driver from the hp site configuration too. His humble request to help me solve my problem regarding.

  Thank you.

  You are the very welcome.

  Here are links to the drivers you need.

  Wireless:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&OS=4063&product=5163244&sw_lang=

  Bluetooth:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-101174-1&cc=us&DLC=en&LC=en&OS=4063&product=5163244&sw_lang=

• Problem with network controller / wireless driver

  Hello, I have problems with my computer network controller. I can't connet to the Internet wireless or wired. In addition, two of my USB Ports do not work.

  My system is HP Pavilion G4 - 2235dx

  A6 - 4400M with Radeon AMD

  Windows 7 Professional

  The hardware ID

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C

  PCI\VEN_168C & DEV_0032 & CC_028000

  PCI\VEN_168C & DEV_0032 & CC_0280

  There are other issues such as:

  PCI device

  SM Bus controller

  USB controller

  When you open Device Manager and every thing under "Other devices" are not available, you will get the real picture. Please I need your help to make this work again.

  Thank you.                       David

  Hi, David:

  Here are links to the drivers you need:

  1. first install the amd chipset driver and restart. You only want to use the first file on the Web page.

  This will install the smbus and usb3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  2. wireless card driver is the following:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229464&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118499_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  3 PCI device is the following:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103762-1&cc=us&DLC=en&LC=en&OS=4063&product=5275619&sw_lang=

• Problem with the Microsoft Office 2000 installation program & 2007 & 2010

  Recently used your windows

  Windows XP Professional SP3 integrated October 2012 (32 bit)

  I have a problem with the installation

  Microsoft Office 2000 Premium EN &

  

  Microsoft Office 2010 Professional FR more

  

  

  But MS Office 2003 no problem with him

  and when iam using win 7 32 any desk of installation nprmally

  MS Office 2000 & 2003 & 2007 & 2010 used and installation normally with no prpblems

  Please give me answer or solution

  Thank you

  Just a troubled life

  Have you tried to check and making sure that all the Windows updates were executed? Also you install this on an account with administrator privileges?

• Problems with Network Diagnostics.

  Original title: Network Diagnostics

  When searching on the Windows Network Diagnostics, he said problems found, not fixed.  I have an extended warranty with Microsoft.

  Please fix this problem.

  Carmen Doucette

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  Please answer the following questions that would help us provide a better solution.

  What is the exact message you get?

  I suggest you try the steps from the following links and post us the results of the network diagnostic message you get:

  Method 1:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  When you run Windows Network Diagnostics, any problem found, along with solutions, is displayed in the Windows Network Diagnostics dialog box. If it has more detailed or technical information about the problem and possible solutions, it is saved in one or more event logs. Administrators Network and technical support staff can use the information in the event logs to analyze connectivity problems or help interpret the findings.

  You can see the Network Diagnostics event logs in Event Viewer. The event logs are saved as system events in the Logs of Windows folder, and the event ID is 6100.

  a. open Event Viewer by clicking the Start button, click Control Panel, clicking system and Maintenance, clicking on Administrative Tools.

  b. double-click Event Viewer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. events should be filtered so that only the network diagnostic events can be found.

  To open an event, double-click it.

  In the Description box, problems are labeled as root causes and solutions are labeled as repair options.

  Work with Wireless Diagnostics events

  ·         When network diagnostics identifies a problem with a wireless network, it saves the information in the case of newspapers such as aid of the class of events or information. There may be one or more events by diagnostic session helper class, but one event of information per session.

  Helper class events. These events provide a summary of the diagnostics results and can repeat some information displayed in the Windows Network Diagnostics dialog box, but they can also provide additional information for troubleshooting, such as information about the connection that was diagnosed, diagnostic results and the capabilities of the wireless network and the adapter a diagnosis.

  ·         Information events. These events can include information about the connection that was diagnosed, settings of wireless network on the computer and network, visible networks and routers or access points in range at diagnosis, list of wireless network favorite computer, connection history and statistics of connection as packet statistics and history traveling. They also provide a summary of connection attempts and their status, as well as the phases of the connection (for example pre-Association, association and security configuration) successful, failed or has not started.

  If you have any questions do not hesitate to answer, we would be happy to help.

• Problems with networking

  Hello

  We have a vmware infrastructure still in version 4 on a HP Blade Center works for a few years without problem.

  However, 2 days ago, we noticed the VMS has been very slow. We have reduced the problem of network connectivity, even if we do not find what is the problem.

  On VMS, if we try to ping another server (inside or outside the confines of the blade), it loses a large number of pings. Ping by the ESX host everything well without loss of ping.

  This happens on all esx servers 4.

  On the other servers blades on the same box (blades not with hypervisor installed), we don't see any problems, and they work very well. The affected only blades are the esx servers.

  No changes were made to the environment that could have an impact on the virtualization servers, nor there was any firmware update, patch or sw in this infrastructure.

  Do you have any suggestions on what this could be and how to perform troubleshooting on this issue?

  Thank you and best regards,

  Hi all

  Thank you for your help. We have already identified the problem. It was a problem with the switches on the blade case. Raise them solved the problem.

  Kind regards

• Laptop HP 15-go99er: problem with network and WiFi

  Hey guys,.

  Does anyone know to solve this problem? I recently installed a new windows on my laptop and since then I can see is more available connections. I went to Device Manager and these drivers seems to have problems

  "Network controller"

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
  PCI\VEN_168C & DEV_0036 & CC_028000
  PCI\VEN_168C & DEV_0036 & CC_0280

  ""PCI Device"

  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022 & REV_00
  PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022
  PCI\VEN_1022 & DEV_1537 & CC_108000
  PCI\VEN_1022 & DEV_1537 & CC_1080

  Can anyone help, because I can't seem to find the proper drivers.

  Hello:

  For the wireless card, this driver should work...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127981-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 7174407 & sw_lang =

  For the E/D PCI controller, this driver should work, but you may need to install manually if auto installation does not work.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_136254_1

  If it does not automatically install, go to Device Manager and click the controller PCI E/D in need of drivers.

  Click the driver tab.  Click on set to update driver.  Select Browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp66899.  Make sure that the include subfolders is selected and the driver should install.  Then restart.

• Problems with the new office of Windows Update January 14, 2014

  The update on the Windows desktop appears to have downloaded on my laptop and then request e-mail/password or a key product to allow it. When I click on the product key, a small window opens with the message get your new windows of office ready for you... it will take a few moments... and then crashes on this message, so I can't put a product key or closed Word / Powerpoint downwards. Does anyone have any suggestions on what I need to do this issue?

  Hello, Beverley,

  Thanks for the information and apologies for the late reply.

  I suggest to reset Windows update components and then check if the problem persists.

  Important this section , method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows

  Please reply with the results, in order to help you solve the problem.

  Thank you

• I have problems with network file sharing on 3 Windows XP computers.

  I created a network of small business between 3 workstations.  The last 2 set up on the network can communicate and share files between them, but cannot connect to the 1st workstation set up on the network to share files.  connect to 2nd & 3rd ws 1 ws.  a ping to the 1st ws is OK.  followed all the instructions for sharing and folder permissions.  is there any security on ws 1 problem that I forgot?

  original title: shared folders

  Hello

  Follow the steps in troubleshooting these items:

  How to troubleshoot a network home in Windows XP

  How to use Simple file sharing to share files in Windows XP

  See also:

  How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP

• had a problem with the remote office, locking of the time-out and the remote host

  I have two computers that both are connected to the network of my company.  Both computers have Windows XP Professional Version 2002 Service Pack 2 installed.  Both computers were set up for remote desktop connection.

  Computer A is a desktop unit and computer B is a portable device.

  Computer A, I can run the remote desktop to computer B without any problem.

  When I run the desktop remotely from computer B to computer A:
  -I see the typical login screen
  -After I typed the user name and password, and then after about 30 seconds, I got the message delay: "the remote connection has expired.  Please connect to the remote computer again. »
  -at this point, the computer A's lock-up, does not have a mouse or a keyboard. the only way out is turning the device off.

  I spent hours on the website of microsoft looking for possible solutions, but can't find.

  According to some suggestions, I have disabled "Symantec Endpoint protection" and "Microsoft Office Communicator", but it did not help.

  Any help is appreciated.

  Check out this thread

  http://en.community.Dell.com/forums/t/19271963.aspx

• Extremely slow WRT54G navigation pages @ 192.168.1.1 - this could be a problem with network card?

  Friend of mine is having the problems of Internet connection on his main PC which is hard wired to the router, it is using Comcast cable (18Mbit) and all of a sudden today the speed fell to dialup speeds, literally, however its ONLY this main with the issue of speed pc, there are 2 other computers connected wirelessly to the router, and they run at full speed during the test on speedtest.net

  Solve the problem, I tried bypassing the router and still have the issue of speed, so I can pretty much rule out the router, but as part of my troubleshooting whenever I try to access the router configuration pages via 192.168.1.1 but it is VERY slow to respond.

  For example when hitting enter after typing 192.168.1.1 it takes about 45 seconds to view the router configuration page, and then clicking on any other tabs takes 30-45 seconds longer to respond.

  So my main question with this post, is it possible that its network card went bad? What would cause really slow access to the configuration of the router?

  The PC is under Win 7 Ultimate 32 bit and Ive tried to run the network troubleshooter, uninstalled the network card in Device Manager / reinstalled the drivers but nothing seems to work.

  I also ran Malware Bytes and the analytical results were clean.

  Any ideas appreciated!

  can you 'borrow' a card? This is the only way to be sure, eliminating hours of trial and error procedures. one of the mega electronic stores is a good source, if it solves your problem you keep the card, otherwise there is the option to return

• A2109 2 problems with networking and an HDMI output

  I had an A2109 for Christmas and have 2 occurring of questions that I need help on.

  1. I was never able to get the HDMI to work. I tried 2 different cables, as well as 2 different TV and when I plug the microphone to the Tablet and the TV, my TV cable don't say no signal source. I got this tablet specifically for the HDMI output and flash support, so I can watch sports on the internet on our main TV.

  2. in the last week or so when I wake up in the Tablet, my apps does not connect to the internet. In the taskbar it shows that I am connected to the network. I open up chrome and you get a DNS error. To solve this problem, I turn off the Tablet and then turn it back on. This happens whenever I wake up.

  I've not being updated to JB again because I don't want to lose the capabilities of Flash

  As I have a follow-up has been able to solve these two issues.

  HDMI: the cables, I bought two bad ones were apparently. I bought another and that he had "snap" in as well and the TV started to show what was on the shelves. How lucky I am with this one?

  Network: Restarted my router and after a few days there were no problem.

• Problem with network interface of Vsphere

  In my interface Vsphere, on an esxi4.1 I see no vswitches and no information, even though in the console, I see this drug ok.

  As I watched in the var and /var/log/vmware/hostd.log I see 3 lines saying:

  Mar 21 14:51:12 pass: [2012-03-21 14:51:12.608 FFDBEE90 error 'NetworkProvider"opID = AD5DBFA0 - 000000 B 7] an error occurred during extraction of virtual switch: interacting with configuration file /etc/vmware/esx.conf error: unlock the ISP ConfigFileLocker
  Mar 21 14:51:12 led: interacting with configuration file /etc/vmware/esx.conf error: I was asked to remove a. LOCK file that I'm not sure is mine.  It is a bad thing and I'm going to fail.  Lock should be released (0)
  Mar 21 14:51:12 pass: [2012-03-21 14:51:12.608 FFDBEE90 error 'NetworkProvider"opID = AD5DBFA0 - 000000 B 7] an error occurred during extraction of virtual switch: interacting with configuration file /etc/vmware/esx.conf error: unlock the ISP ConfigFileLocker
  Mar 21 14:51:12 led: interacting with configuration file /etc/vmware/esx.conf error: I was asked to remove a. LOCK file that I'm not sure is mine.  It is a bad thing and I'm going to fail.  Lock should be released (0)
  Mar 21 14:51:12 pass: [2012-03-21 14:51:12.609 FFDBEE90 error 'NetworkProvider"opID = AD5DBFA0 - 000000 B 7] an error occurred during extraction of virtual switch: interacting with configuration file /etc/vmware/esx.conf error: unlock the ISP ConfigFileLocker
  Mar 21 14:51:12 led: interacting with configuration file /etc/vmware/esx.conf error: I was asked to remove a. LOCK file that I'm not sure is mine.  It is a bad thing and I'm going to fail.  Lock should be released (0)

  In my/etc/vmware, I have a few files that start with ".". # »

  ...

  r - r - r - T 1 root root 0 18 May 2010. #dvsdata.db
  r - r - r - T 1 root root 0 18 May 2010. #esx.conf
  -r - r - r - T 1 root root 170 may 18, 2010. #license.cfg
  r - r - r - T 1 root root 0 18 May 2010. #locker.conf
  r - r - r - T 1 root root 0 18 May 2010. #snmp.xml
  -r - 1 root root 30 T 18 May 2010. #vmware.lic

  ...

  and also the file

  ...

  -rw - 1 root root 39.5 k Mar 21 14:15 esx.conf

  ...

  I would like to mention that on the ESXi virtual machines work, but can not add other elements of networking in Vsphere.

  I have attached a few out of orders for components network (vmknics, vswitches and network cards)

  Help, please!

  I need urgent HELP!

  Oops, you have ESXi but in vmware KB described how to solve the problem for ESX :(

  So that you can attempt to restart management services 'services.sh restart' other options of console - restore previous version esx.conf

• Problem with networking when having multiple virtual machines on a single host

  Since the implementation of ESX 3.5i server on PowerEdge 1850 Server I had network problems. It took a large upstream of the violin - do not do something specific - but finally I could persuate a VM to talk to the outside world.

  Virtual machines have always been able to ping other virtual machines and physical NETWORK card to the host (with a static IP address only), however with a bit of deactivation/activation etc I could possibly get it connected. I have exactly the same symptomsusing the two Windows XP and Redhat, both with VM Tools installed.

  If big, I can get the virtual machines connected, *however * every time I managed to connect a computer to the outside network, she will knock off either a return to the State where I can ping only the other VMs and Teddy.

  I tried them in different port groups as well as in different vSwitches with a separate Teddy, but exactly the same problem.

  I thought it was just my ignorance, however after thorough reading and wasting time trying different combinations, I started to think this is a hardware incompatibility or an ESX installation problem.

  Please please please, if someone can help solve the problem, or diagnose if my suspicions are correct.

  I enclose my last combination of configurations!

  Thanks in advance.

  Run 'show port-security' on the switch and see what you have.  You can also view the current configuration of the port connected to an esx.  A switch will remove any doubt relating to port config differences type.

  -KjB

  VMware vExpert