Problems with Save Restore Point

Hello

I'm trying to restore a save point in a taskflow programmatically. The problem I'm having, is that only two of the fields are populated. These two fields are drop-down lists related to data controls. I also have a data control field that is also exposed as a drop which is not restored, and also several input text fields and a radio button that is not also restored. Could someone help me please?

Hello

only the submitted data are restored.

Frank

Tags: Java

Similar Questions

Problems with the restore points very limited available in the system restore

I found that I can't go further than 3 days on the system restore points. I have noticed for some time and it causing problems. I can't go back to the previous month. Can someone tell me why?

YES-open SR-glance left to SR parameters - click sur-put slider for max.

min he won't give you a few days.

Problems with XP restore

Hello

I have problems with the XP system restore and would appreciate any help you can offer.

I have an office of 3 GHz with 1.5 GB of RAM and XP Home SP3, IE8 + Firefox and have installed and use at least every day, Avast antivirus + advanced

System of care + Malwarebytes' Anti-Malware

I also used to have IObit Security 360, but as it is no longer supported, I uninstalled this morning and successor

with IObit Malware Fighter. I did this AFTER noticing that the system restore did not work.

The last time I used XP system restore has been subject of early to mid-April when it worked perfectly, now I can't restore

in all, for any date.

I tried to restore normal mode and safe and also in safe mode with command prompt "% systemroot%\system32\restore\rstrui.exe".

without the quotes

Anyway I try windows goes through the process of restoration, but always ends in failure to restore the error message.

Notes on the system restore saved:

1. the first system restore point shows that 11 May 2011, nothing before that even if I restored it successfully

all about early to mid April. The system does not even show April, that it sticks on May.

2. system restore points were created as follows:
11 may - "software distribution service.
12 may - 'removed install IQ Updater', then 10 minutes later, "install installed Updater IQ."
May 13 - "checkpoint system" (see also 14, 15, 16 & 19 May)
18 may - "IObit Uninstaller Restore Point"
21 may - "checkpoint system" and "installed windows XP KB2492386.

Notes on the the event logs for "sr" and "srservice."

May 21, 2011 WARNING event ID 1073

The attempt to power off of BLACKIE (BLACKIE is the name of my pc)

and

May 21, 2011 INFORMATION 111 event ID

A restore point 'Checkpoint System' restore failed. No changes were made to the system.

I ran checks malware etc as shown above and pc is clean and in good health.

Now, I have reached the limit of my technical knowledge and am stuck and would appreciate really any suggestions on what to do next.

Thank you in anticipation

Gordon

Great stuff, thanks a lot

Gordon

You're welcome Gordon. Glad I could help. The only downside to re-setup of system restore is that you lose all your previous restore points. So, if you were in a situation where you need one of these restore points, you need to find another way to resolve what the question is / was. Nevertheless, I hope that you never have another issue to resolve, but if you always try to make the system restore of last resort. Well, re-installation of Windows is the last but, System Restore is just ahead of him.

Problem with the restoration of the database

Hello world
I have a strange problem while restoring the database with rman. The problem is that the data are not restored at all.
Let me show you what I do step by step:
1. create the test table:
$ sqlplus / as sysdba
SQL * more: Production of release 11.2.0.1.0 Thu Apr 17 22:51:58 2014
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options
SQL > create table test (ID);
Table created.
SQL > insert into values test (1);
1 line of creation.
SQL > commit;
Validation complete.
2. backup the current database:
rman target $ /.
Recovery Manager: release 11.2.0.1.0 - Production Fri Apr 17 22:56:44 2014
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: ORACLE (DBID = 1672007929)
RMAN > backup database;
From 17 April 14 backup
using the control file of the target instead of recovery catalog database
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 6 type of device = DISK
channel ORA_DISK_1: starting full datafile from backup set
channel ORA_DISK_1: specifying datafile (s) in the backup set
Enter a number of file datafile = 00001 name=/u01/app/oracle/oradata/oracle/system01.dbf
Enter a number of file datafile = name=/u01/app/oracle/oradata/oracle/sysaux01.dbf 00002
Enter a number of file datafile = name=/u01/app/oracle/oradata/oracle/undotbs01.dbf 00003
Enter a number of file datafile = 00005 name=/u01/app/oracle/oradata/oracle/example01.dbf
Enter a number of file datafile = name=/u01/app/oracle/oradata/oracle/users01.dbf 00004
channel ORA_DISK_1: from room 1 to 17 April 14
channel ORA_DISK_1: finished piece 1 to 17 April 14
piece handle=/u01/app/oracle/flash_recovery_area/ORACLE/backupset/2014_04_17/o1_mf_nnndf_TAG20140417T230734_9o1j980f_.bkp tag = TAG20140417T230734 comment = NONE
channel ORA_DISK_1: complete set of backups, time: 00:00:57
channel ORA_DISK_1: starting full datafile from backup set
channel ORA_DISK_1: specifying datafile (s) in the backup set
including the current control in the backup set file
including current SPFILE in the backup set
channel ORA_DISK_1: from room 1 to 17 April 14
channel ORA_DISK_1: finished piece 1 to 17 April 14
piece handle=/u01/app/oracle/flash_recovery_area/ORACLE/backupset/2014_04_17/o1_mf_ncsnf_TAG20140417T230734_9o1jc09s_.bkp tag = TAG20140417T230734 comment = NONE
channel ORA_DISK_1: complete set of backups, time: 00:00:01
Backup finished on 17 April 14
3. change the data in the test table
$ sqlplus / as sysdba
SQL * more: Production of release 11.2.0.1.0 Thu Apr 17 23:10:16 2014
Copyright (c) 1982, 2009, Oracle. All rights reserved.

Connected to:
Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options
SQL > select * from test;
ID
----------
1
SQL > update test set ID = 2;
1 line update.
SQL > commit;
Validation complete.
4. restore the database
RMAN target /.
Recovery Manager: release 11.2.0.1.0 - Production Fri Apr 17 23:11:15 2014
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: ORACLE (DBID = 1672007929)
RMAN > shutdown immediate;
using the control file of the target instead of recovery catalog database
database closed
dismounted database
Instance Oracle to close
RMAN > bootable media.
connected to the database target (not started)
Oracle instance started
mounted database
Total System Global Area 835104768 bytes
Bytes of size 2217952 fixed
629147680 variable size bytes
197132288 of database buffers bytes
Redo buffers 6606848 bytes
RMAN > restore database;
From restoration to April 17, 14
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 156 type device = DISK
channel ORA_DISK_1: from the restore backup set data file
channel ORA_DISK_1: specifying datafile (s) to restore from backup set
channel ORA_DISK_1: restore datafile 00001 to /u01/app/oracle/oradata/oracle/system01.dbf
channel ORA_DISK_1: restore datafile 00002 to /u01/app/oracle/oradata/oracle/sysaux01.dbf
channel ORA_DISK_1: restore datafile 00003 to /u01/app/oracle/oradata/oracle/undotbs01.dbf
channel ORA_DISK_1: restore datafile 00004 in /u01/app/oracle/oradata/oracle/users01.dbf
channel ORA_DISK_1: restore datafile 00005 to /u01/app/oracle/oradata/oracle/example01.dbf
channel ORA_DISK_1: backup /u01/app/oracle/flash_recovery_area/ORACLE/backupset/2014_04_17/o1_mf_nnndf_TAG20140417T230734_9o1j980f_.bkp piece reading
channel ORA_DISK_1: room handle=/u01/app/oracle/flash_recovery_area/ORACLE/backupset/2014_04_17/o1_mf_nnndf_TAG20140417T230734_9o1j980f_.bkp tag = TAG20140417T230734
channel ORA_DISK_1: restored the backup part 1
channel ORA_DISK_1: restore complete, duration: 00:00:55
Restoration finished in 17 April 14
RMAN > restore database;
To go back to April 17, 14
using channel ORA_DISK_1
starting media recovery
media recovery complete, duration: 00:00:03
Finished recover at April 17, 14
RMAN > sql 'alter database open;
SQL statement: alter database open
5. check if the data has been restored
sqlplus / as sysdba
SQL * more: Production of release 11.2.0.1.0 Thu Apr 17 23:14:39 2014
Copyright (c) 1982, 2009, Oracle. All rights reserved.

Connected to:
Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options
SQL > select * from test;
ID
----------
2
Summary:
Data has not changed. Provided the ID is 1, but after the success of data recovery is not restored (ID is always 2).
Can someone help me? What I am doing wrong?
Database is Oracle 11 g with archivelog active
Ol6 2.6.39 Linux OS - 300.17.2.el6uek.x86_64

RMAN > restore database;

To go back to April 17, 14

using channel ORA_DISK_1

starting media recovery

media recovery complete, duration: 00:00:03

Finished recover at April 17, 14

RMAN > sql 'alter database open;

SQL statement: alter database open

5. check if the data has been restored

sqlplus / as sysdba

SQL * more: Production of release 11.2.0.1.0 Thu Apr 17 23:14:39 2014

Copyright (c) 1982, 2009, Oracle. All rights reserved.

Connected to:
Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options

SQL > select * from test;

ID
----------
2

Summary:

Data has not changed. Provided the ID is 1, but after the success of data recovery is not restored (ID is always 2).

Can someone help me? What I am doing wrong?

Database is Oracle 11 g with archivelog active

the recovery was successful, but achieved your goal.

There are several options to reach your goal to recover your database to a particular State that is point in time.

1 restore the file of control as noted above. you restore the control file must not be aware of the generated once archivelog that you update your table. IE backup controlfile prior you updatedyour table.

2. do not apply archivelog all during recovery. You can use SNA, SEQUENCE, RESTORE POINT option of the recover command. This option requires that you open your database with resetlog.

read: scene of Flashback and the database Point-in - time recovery

After a restore successful your database (before the recover command), you can "alter database open read-only" to check and confirm the values in the table.

HTH

Tobi

Problem with the restoration of the system

Hello

I can't restore my system to an earlier time. When I try to restore, the computer stops and seems to go through steps, he needs to in order to restore but when starting, even once, it displays a message saying "system could not be restored (date/time). Please select another restore point. "The problem is that even if you select another restore point, is the same thing. I ran my anti-virus program and no viruses are detected. Any ideas?

Hello

Maybe the created restore point has been corrupted or the option has been disabled.
I studied in the net and found the FAQ from Microsoft document on the Restore tool in Windows XP.
http://www.Microsoft.com/technet/community/newsgroups/faqsrwxp.mspx

Maybe it will help you.

Problems with system restore recovery disc

I accidently turned off my computer when starting, so now it doesn't start any more.

So, I finally burned an ISO recovery disk, and I use recovery tools by booting from a CD. I have a system of two days, which has the chance to restore. However, he says that the disc is damaged. To restore, I must check the C drive. However, I can't check that right now, because it is in use. So I have to schedule a check disk for the next boot.

However, the next time I start, it starts on the hard drive and then returns to the black screen - the original problem. So, I have to turn it off and try something else.

I'm really close, it seems and the files are there, I can't access it. It is quite frustrating. What should I do? Don't forget, I have access to a prompt from here.

So is there a way to recover my system, or what I need to get a Vista disk and reinstall? I have all my backup files, via Ubuntu, so if I have to, I can reinstall Vista. I would like to avoid this if possible, however.

Hello

·         Remember to make changes to your computer before this problem occurred?

·         You get code or error messages when you start the computer?

·         What is the brand and model of the computer?

·         You're able to boot in safe mode?

Method 1:

Try to use the last good known Configuration if you can't start Windows, but it started correctly the last time you have turned on the computer.

http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

Method 2:

Safe mode safe mode and system restore

Step 1:

I suggest you to check if you can connect to the computer in safe mode:

http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

Step 2:

When you use safe mode to resolve problems with your computer, you might find the tools and useful features.

http://Windows.Microsoft.com/en-us/Windows-Vista/diagnostic-tools-to-use-in-safe-mode

Method 3: Startup Repair

Try running Startup Repair in the windows recovery environment mode and check if it helps:

http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

Problem with system restore post on Vista update

My Vista PC loses the internet connection so I tried to restore to the last known point of function after uninstalling Norton 360. This has created an error in rstrui.exe (system restore Microsoft Windows has stopped working) Please help! I think this happened to post recent MS update a couple of days.

Hello

Thank you for using the Microsoft Windows Vista Forums.

I will need some additional information to help you best.

O what is the exact error message you get?

O that you reinstall the Norton software before you try to restore your computer?

In the meantime, you can try to restore your computer to a previous state of safe mode.

Try to restore your computer to the previous state of safe mode.

Follow the instructions to start the computer in safe mode.

1 turn on the computer or restart the computer

2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear.

If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.

3. ensure that the safe mode option is selected.

4. press ENTER. The computer then begins to start in safe mode.

Follow the instructions below to restore your computer to a previous state of safe mode.
1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
2. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
3. In the System Restore dialog box, click Next.
4. In the list of restore points, click a restore point created at least a week before the current date, and then click Next.
  Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.
5. Click Finish.
6. The computer restarts. The system files and settings are returned to the State they were when the restore point was created.
Check whether the problem is resolved.

Please post back and let us know if it helped to solve your problem.

Kind regards

KarthiK TP

Inspiron 1525 - problems with image restore factory (need help!)

Hi all

I have a problem with my Dell Inspiron 1525, I can not solve... so please help me!

My Windows Vista Home Edition crashed while installing an update and now could not start more (I always get this bad blue screen during startup), so I would like to repair my laptop using the Dell factory image.

I'm doing... .with related problems

1. I press F8 during startup, but there is no entry "Dell factory image restore" or something like that (I even tried each one entry but nothing factory imagine restoration).

2. by starting with a Ubuntu live cd, I can see that there is a partition that contains (among other files and folders) that image (:\dell\image\factory.wim) and a Tools folder where there are files imagex.exe and pcrestore.exe

3 one... Using a pen drive usb bootable containing a bootable back version, I Prime the system. I also put in the usb pen, ntfspro.exe in order to read the ntfs partition

b. I went in D:\Tools and run this command:

> PCRestore.exe --> but I received an error message indicating that this program cannot be run in dos mode

c. so I tried this other person (I've read here in the Forum):

> imagex/apply c:\dell\image\factory.wim 1 c:\ --> but I got the same error as above, it is impossible to run this program in dos mode

4. in addition (and I think it's weird), I tried to boot with the dvd operating system shipped by Dell with the laptop: loading at startup of Windows, but just after the progress bar (green) appears at the bottom of the screen, it blocks showing again this bad blue screen!

Now I don't know what I can do!

.. .Please help me!

Is there a way to restore the laptop with the Dell factory image?

Thank you

Orlando

orlando1,

Thank you for using the Dell Community Forum.

When you press F8 and the menu, choose the option which reads 'Repair your computer' and follow the menu to restore the system.

This utility formats the partition of hard drive to the operating system before you restore the original image. This means data on that partition is deleted and cannot be retrieved.

If you create a second partition with a third-party utility, Dell Factory Image Restore remains unchanged until the partition of the image is not deleted.

A problem with my cursor/pointer?

Hi guys and girls,

I need someone to explain to me how I would delete a problem with my Windows 7 Professional O.S. The problem is with my pointer keeps circling constantly. It is most annoying. All suggestions greatly appreciated. Even after the mouse has been yet. for a few minutes.

PLEASE HELP ME!

Best regards

Henry Murphy.

As Shawn Keene says the problem may be due to some virus/malware. If the antivirus does not detect anything, the question may be because of the hard drive. It is also a symptom of the drive reaches its end of life. It is high time you back up all your personal/important data and install a new hard drive.

Problem with internet access point

Hello, I saw that this question was asked before, but has never seen a solution to my problem, I will explain:

I have like 5 months with this problem. I have a TP-LINK 300Mbps Wireless N Router, model No. TL-WR841ND. The fact is that when I plug in my router to the Modem, my wireless network seems to work fine, but when I try to connect to my computer or any other device to the network (mobile phones, playstation 3, tablets, etc.), I am unable to do so. On my laptop, I get the message: 'Problem with wireless adapter or access point', but the most confusing thing is that sometimes I can connect to the Internet via my network wireless without any problem.

This time I decided to post my problem, because I'm tired of it. Sometimes it happens, sometimes it doesn't. Right now, I have two days without Internet connection (Via router), because my modem works properly.

PS: I have another router (Linksys) and I can connect to this network, but I want to solve my problem with the TP-Link because the signal is stronger. Help!

See links.

How to install a TP-LINK wireless routers (Recommended)?

http://www.TP-link.com/LK/article/?faqid=92

Why can I not access the Internet after connecting the TP-LINK router to my modem.

http://www.TP-link.com/LK/article/?faqid=138

TP-Link FAQ.

http://www.TP-link.com/LK/support/FAQ/?keywords=TL-WR841ND

Problems with save for web - Illustrator

Had problems with the recording of the images for the web in Illustrator (I use AI CC 2015). When I save it for the Web my preview image appears at the level of 50% and pixelated. And the saved image is pixelated. Type is optimized. When I try to export the file resolution of 72 dpi out of poor as well. I try to save at a higher resolution and reducing the size and who doesn't either. Any help would be appreciated. Thank you

Adobe has released a 19.0.1 fix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately. If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

problem with list and point make showing is not the last element

Hey all the...
I have a strange problem with a spark list and item converter. All I want to do is display images. However, the last image is not rendered. The code is very simplistic. The HGROUP restores only the first two pictures. However, if I add a < s:lable > tag to the HGROUP after image, all three of the images that I expect to make it appear. Someone knows why?
Thanks in advance!
<? XML version = "1.0" encoding = "utf-8"? >
"" < s:ItemRenderer xmlns:fx = "http://ns.adobe.com/mxml/2009"
xmlns:s = "library://ns.adobe.com/flex/spark".
xmlns:MX = "library://ns.adobe.com/flex/mx".
autoDrawBackground = "true" >
< fx:Script >
<! [CDATA]
Import valueObjects.ManufacturerIconBE;

[Bindable] private var comp: ManufacturerIconBE;

override public function set data (value: Object): void
{
model = value as ManufacturerIconBE;
}
[]] >
< / fx:Script >
< s:HGroup >
< s:Image source = "{comp.imagePath}" / > "
< / s:HGroup >
< / s:ItemRenderer >

Use preliminaryWidth and preliminaryHeight to book some dimensions of the Image.

problems with the restore image on dreamweaver cs3

I'm a GoLiver trying to learn Dreamweaver. I'm having a problem with the image of restoration on the bearing. Here's the url
http://www.allthegills.com/meadowcroftweb
Not sure where I was wrong.
Thanks for any help.

The onmouse above and on the need to go in your href tag. You have them in your img tag. Should look like this

[HELP] Problem with the restoration and recovery in the new host
Hi, guys!

I have tried for two days, but still can't make it work.
I took a hot (online) full backup archive as well as the control file logs with the SPFILE and then copy the backup to the new host with the same directory structure and parameters. Finally, I tried to restore and recover the database on the new host, but failed during the restore process.

The original host and the new host have the same subject Oracle installed until the patch level. I couldn't understand the solution to this problem based on my knowledge on Oracle DB.

Could someone help me out here? Any advice would be appreciated!

-----
RMAN > restore the database up to the wire of the sequence 10 1;

From restoration to November 8, 11
using channel ORA_DISK_1

channel ORA_DISK_1: from datafile backupset restoration
channel ORA_DISK_1: specifying datafile (s) to restore from backup set
restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01. DBF
restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01. DBF
restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01. DBF
restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01. DBF
restoring datafile 00005 to D:\ORA_DATADATA01. DBF
restoring datafile 00006 to D:\ORA_DATA\DATA02. DBF
restoring datafile 00007 to D:\ORA_DATA\INDX01. DBF
restoring datafile 00008 to D:\ORA_DATA\INDX02. DBF
channel ORA_DISK_1: backup C:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_. BK
P

switch to the previous backup

RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the restore command at 11/08/2011 11:41:33
RMAN-06026: some targets not found - abandonment of restoration
RMAN-06023: no backup or copy of the file 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
-----

Here is some additional information you might want to know about:

-----
RMAN > list incarnation;

List of Incarnations of the database
DB key Inc key STATE ID DB name DB reset reset time SNA
------- ------- -------- ---------------- --- ---------- ----------
1 1 PRODDB 3774691295 PARENT 1 17 APRIL 07
2 2 3774691295 PRODDB PARENT 521803 6 OCTOBER 11
3 3 3774691295 PRODDB PARENT 1595143 20 OCTOBER 11
4 4 3774691295 PRODDB PARENT 1600974 20 OCTOBER 11
5 5 3774691295 PRODDB PARENT 1952053 27 OCTOBER 11
6 6 PRODDB 3774691295 CURRENT 2146951 7 NOVEMBER 11

RMAN > backup recoverable list;

List of backup sets
===================

Time of accomplishment BS key Type LV size device Type elapsed time
------- ---- -- ---------- ----------- ------------ ---------------
37 full 822,34 M DISK 00:29:47 7 November 11
BP key: 37 status: AVAILABLE Tablet: NO Tag: TAG20111107T175037
Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_. BKP
List of files to backup data value 37
Name of file LV Type cash SNA cash time
---- -- ---- ---------- --------- ----
2149673 full 1 7 November 11 D:\DBDATA\PRODDB\SYSTEM01. DBF
2 full 2149673 D:\DBDATA\PRODDB\UNDOTBS01 7 November 11. DBF
3 full 2149673 D:\DBDATA\PRODDB\SYSAUX01 7 November 11. DBF
4 integer 2149673 D:\DBDATA\PRODDB\USERS01 7 November 11. DBF
5 integer 2149673 D:\ORA_DATA\DATA01 7 November 11. DBF
full 2149673 D:\ORA_DATA\DATA02 6 7 November 11. DBF
7 full 2149673 D:\ORA_DATA\INDX01 7 November 11. DBF
8 whole 2149673 D:\ORA_DATA\INDX02 7 November 11. DBF

Time of accomplishment BS key Type LV size device Type elapsed time
------- ---- -- ---------- ----------- ------------ ---------------
38 full 6.95 M DISK 00:00:03 7 November 11
BP key: 38 status: AVAILABLE Tablet: NO Tag: TAG20111107T182034
Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_07\O1_MF_S_766606834_7CH8Q439_. BKP
Control file included: cash SNA: 2151141 cash time: 7 November 11
SPFILE included: Modification Date: 7 November 11

Time of accomplishment time BS key size Device Type
------- ---------- ----------- ------------ ---------------
18,46 39 M DISK 00:00:05 8 NOVEMBER 11
BP key: 39 status: AVAILABLE Tablet: NO Tag: TAG20111108T093359
Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
2011_11_08\O1_MF_ANNNN_TAG20111108T093359_7CJY7TG1_. BKP

List of newspapers archived on backup value 39
The next time that THRD Seq YVERT low low time next YVERT
---- ------- ---------- --------- ---------- ---------
1 1 2146951 7 NOVEMBER 11 2149493 NOVEMBER 7, 11
1 2 2149493 7 NOVEMBER 11 2149519 NOVEMBER 7, 11
1 3 2149519 7 NOVEMBER 11 2149565 NOVEMBER 7, 11
1 4 2149565 7 NOVEMBER 11 2149641 NOVEMBER 7, 11
1 5 2149641 7 NOVEMBER 11 2172859 NOVEMBER 7, 11
1 6 2172859 7 NOVEMBER 11 2197851 NOVEMBER 7, 11
1 7 2197851 7 NOVEMBER 11 2220349 NOVEMBER 8, 11
1 8 2220349 8 NOVEMBER 11 2222621 NOVEMBER 8, 11
1 9 2222621 8 NOVEMBER 11 2222729 NOVEMBER 8, 11
1-10 2222729 8 NOVEMBER 11 2223088 NOVEMBER 8, 11

Time of accomplishment BS key Type LV size device Type elapsed time
------- ---- -- ---------- ----------- ------------ ---------------
40 full 6.95 M DISK 00:00:00 November 8, 11
BP key: 40 status: AVAILABLE Tablet: NO Tag: TAG20111108T093411
Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_08\O1_MF_S_766661651_7CJY84LK_. BKP
Control file included: cash SNA: 2223097 cash time: November 8, 11
SPFILE included: Modification Date: 8 November 11
-----

Thanks in advance!

Jay
In short, the RCS of the controlfile will be generally higher than corresponding SCN of the data in the event of hot backup (online) file; However, the two SNA will be the same in the case of cold (off-line) backup. Am I entitled?

Yes, it's true. In a backup cold (assuming that the CLOSURE was not a SURRENDER but was NORMAL, TRANSACTIONAL, or IMMEDIATE) all files in the database (data files, redo log and controlfiles files) are 'compatible' - at the same point in time, to the same SCN. In a hot backup, the files are updated. RMAN is not necessarily take all the data files at the same time - for example when you have several data files, RMAN would backup the files in batches of 4 or 8 - data files are therefore controlled at different points in time. Similarly, the controlfile is saved last.

Hemant K Collette

Problems with the restoration of a previous session

Hello! Earlier today, I closed my window with the option "save the tabs for the next time." I then restarted my Firefox and all I got was a blank white screen. I waited for awhile and then closed the window. When starting Firefox again once, I looked at the option "recently closed windows" and it is the normal color of black, not gray. When I moved to select, it did not bring the list of my windows closed, but a very very small white box. Clicking on it did nothing. I tried to go to about: sessionrestore, but the box had no option in it at all. Nothing to click or highlight. I read a little on similar issues, and I backed up all my "sessionstore" type options in the profile folder just to be safe. I tried the method of the first name change the sessionstore.js to sessionstore.old and took the file sessionstore.bak - 20132025151332 and replacing the .js .bak. No luck. I also tried to delete the original .js file and try again the .bak to step .js. I have to do something wrong, because whenever I have restart Firefox, all I get is the start page. I activated the option "when Firefox starts, show my windows and tabs from last time '. It is said that the original .bak file is dated 11/04/2013, and I also have a file sessionstore-1 dated 6. The original .js is dated from 10. Any help is very appreciated! It is quite upsetting to lose so many important tabs. Also, my computer is running Windows XP. Thank you very much!

If the sessionstore.js file is corrupted, then you may not be able to restore this session

There are a few examples of how extract a sessionstore.js file links in this mozillaZine forum thread.
- http://forums.mozillazine.org/viewtopic.php?f=38 & t = 622036 & start = 60 & p = 12098147 #p12098147
In case you use "clear history of Firefox closing:
- do not erase browsing history
- Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
- https://support.Mozilla.org/KB/clear+recent+history

Problems with Save Restore Point

Similar Questions

Maybe you are looking for