ProBook 6565 b: ProBook 6565 b - power light stays on

Similar Questions

• S5-1224 blue power light stays on after stopping; What happened to the orange light "sleep"?

  I have a Slimline Paviliion S5 - 1224.  No changes or additions were made to the material.  When I stop the machine, it is used to change the orange or the wide power led.  Now, the blue power light stays on and blinks after power off the power.  The light on the adapter bluetooth in the front USB port stays on, too.  After removing the USB BT adapter, the light on the adapter goes off, indicating that the power is off to this USB port.  But PC power light blue is not far away, even when it is disconnected from the wall outlet.  It's as if the machine is haunted.  I unplugged the decision-making and the left that it disconnected for more than a week, but the blue light on the front of the machine never went out and is still on, even if she wavers and seems to fade a little.  When I turned on the rear, the light back to him is normal on State 'blue '.  Power off, blue light stays on.  Disconnected from the plug, light blue stays on.  I'm afraid to leave this thing in the House and will probably trash if someone does not have a solution.  Anyone who has ever seen anything like that?  All my friends of teckie IT are puzzled and suggested I post here to see if anyone else had the same problem.  Don't bother taking repair.

  UPDATE: I removed all devices and low and behold, when I unplugged my BluRay USB drive, the lights are all on the CPU.  I restarted, close, tried to sleep and Hibernate and everything works fine now.  I guess that the BluRay player was watching somehow the CPU to turn it off.  It is a unit that is known for needing a huge amount of energy to function properly.  Naturally, the Blu - Ray player is not get reconnected to this HP PC.   Now I use with my Mac.

• 15 - p001tx: when stop the laptop but the power light stays on

  Second, when loptop is activated and the power is connected than his do not go into computer laptop sleep mode.if is in an ideal condition of 10 min. after 10 min its touchpad or keyboard do not work.than power button for a long time to stop again to restart the computer

  Hello @rajnish1

  Welcome to the HP Forums!

  I read your message and understand that your HP Pavilion 15-p001tx isn't turned off properly. I'm happy to help you with this problem. First of all, please perform a reset. Once this is done, please follow the steps described in this document:

  HP Notebook PC - management Power Options (Windows 10)

  If the document does not have you helped to solve the problem, try to restore the BIOS , then check the updates of Windows.

  Thanks, I look forward to your response with the result. If this post helped you, feel free to click on the thumbs up!

• Laptop HP pavilion game 15: stop light stays on for about 15 seconds after stopping

  I have an SSD M.2, when I stop the pc through windows, the power light stays on for about 15 seconds, the laptop does not turn off, but it is strange that the light stays on.

  the problem and do not receive any documented

  any advice would be appreciated

  Hello

  It is normal, in many cases, your charger light will stay longer when you turn off your machine from the wall.

  Kind regards.

• DeskJet 932C - the power light is on and the cartridge flashing

  Hello! I know my DeskJet 932C is 'old', but it seems to be in excellent condition.  First time that I had a problem.  The power light is on and the cartridge is flashing.  When I open the cover, the plateau of the cartridge moves to the far left.  The arrow points to the unfortunate color cartridge.  The missed years ago color cartridge.  I use my printer to print B & W, so I've been printing with the empty cartridge in place for years.

  I removed a reinserted the color and B & W cartridges and turn on the power and turns off.  I used the HP print and scan doctor, and it's scan does not have something wrong, I clicked on print a test page, and nothing happens.  The test page is listed as 1 document in the queue.   Status: error - printing.

  The printer has been in its current position on my desk for years.  It was not known of any trauma... None does damage... no power failure.  It's clean.  Has been connected to 4 laptops and uninterrupted service.

  I prefer not to buy a new color cartridge.

  Would appreciate help.  I would like to know what it means and if there is a solution.

  Thank you!

  Focus21

  The printer will perform electrical cartridges to light control and a few other times.  If an error printing can be blocked to avoid damaging the printer.  Clean the contacts of the cartridge as shown in the document here can solve the problem, otherwise you will probably need to replace the color cartridge.  The 932 Deskjet will allow printing with an empty cartridge, but for years, the cartridge may fail electrically and needs to be replaced.

• Equium L40 10 X flashing green power light

  Hi guys,.

  I have an old Equium L40 that I haven't used in a while.

  Now when I plug the power adapter into the power green led just blinks constantly.
  I checked the blink codes, but I can't find one for mine. It simply turns green for a second then off.
  Then green for a second then off the coast and that constantly.

  I tried to remove the battery for a few minutes and then hold the power button for a minute, but I just get the same result. The adapter is one that came with the laptop and as far as I can tell works very well.

  Other ideas would be greatly appreciated!

  Thank you guys!

  Hello

  Indicator power (DC IN) indicates the status of the power supply with the power adapter plugged.
  (Without flashing) Green means supply and the computer is turned on.
  The power light on the front of the computer lights green when the computer is turned on.
  Flashing orange indicates power to the computer while the laptop is in mode 'sleep'.

  Unfortunately, the DC IN green flashing red state looks like a hardware problem.
  Probably the power supplied to the laptop is abnormal or there are a few problems with electronic power on the motherboard.

  By the way: Please check the memory modules live. Blow an and test the device using that one module in each slot. Check the two modules.
  A few years ago, a friend of mine had some problems with the laptop. The flashing light indicates the issue of RAM

• Won't boot satellite R850 Pro - fan snoring; power light cycles; NumLock on

  My R850 Pro Satellite won't start. When I press the power button the power light on the laptop (under the mouse buttons) travels flashing green, green, orange, orange and the snoring of fan. also the Verr Num led on the keypad is turned on and won't go off in such a hurry. The screen is blank and plug a monitor displays a white screen.

  Remove the battery has no effect, the same results as with.

  The hard drive is readable went out and attached to the other pc as external drive using a shopping cart.

  Any ideas on what to try, hope someone can help you.

  Thank you, Carol

  You see a Toshiba splash screen at the beginning?
  You can access the BIOS?

  If this is not possible, a serious hardware problem appeared...
  It could just be a memory, but in the worst cases, your motherboard is the problem

• Satellite A105 - power light lights up but the white screen

  Hello

  I have a Toshiba Satellite A105 and I went on vacation and the laptop was working fine. I ve come back and the power light is on, I can hear the laptop a few noises but the screen remains empty. I tried to connect another monitor to it to try to get out of the way, but nothing seems to work at all!

  Anyone have any ideas?

  See you soon!

  Try this:

  (1) remove the battery and unplug the AC adapter
  (2) wait about 30 min
  (3) reconnect the battery and the AC adapter
  (4) try to put the laptop

  If it does not help I put t see any other solution as to contact the ASP in your country to control the laptop!

  Good luck

• Satellite 2805-S201: AC power light flashes orange 8 times

  Hello

  I worked on a Satellite 2805-S201 and everything was fine until I put a PCMCIA wireless with 3, 3V power.
  After that, the AC power light flashes orange 8 times and recycle.

  It comes with power supply, battery, AC and no battery installed, etc. If I pull out the power plug and the battery and then put both when AC is green and the battery may charge. As soon as I push the power button, I hear a light click on the right side of the device and then it goes into the amber cycling power.

  Bulletins of support mentioned that the card could get damaged, but did not mention the unit itself.
  No, the PCMCIA card is not always connected

  Any thoughts?

  CA

  Hello

  The flashing provides a micro code which refers to the hardware failure.
  But please don't ask me what might mean this code because in my opinion, only an authorized service provider can be read and can check in his manuals and documentations.
  But it is of course, in most cases, it s a hardware problem of motherboard! ;(

  Perhaps the external PCMCIA card was not totally compatible and damages of something on the map but it's only my personal suggestion to ensure what s bad hardware fault diagnosis would be necessary.

• Portege M750 starts no-power light flashes

  I have an orange flash on my power light error code (1 long flash 3 short 1 long 2 short 1 long 1 short)...

  I have to take the power connector on battery and start battery to operate...

  I use image windows 7 Toshiba with all Microsoft updates (now I NEED many to verying reasons so don't grill me again... for example DON 'T SUPPORT MICROSOFT UPDATES blah blah blah)

  What does this code mean and y at - it a Bios Beta above version 3 for these things...

  Any helpful comments would be greatly appreciated...

  Hello

  In short, 0, long ways 1.
  In your case, the binary code is 1000 1001
  Now, we must reverse the binary code because the most significant bit.
  This means that the code is; 1001 0001
  The HEXADECIMAL code means; 91 h

  Error code is 91 h but I n t know what that 91 h means and what role might be affected exactly!

  Eventually it s something wrong with electronic power supply on the motherboard, but only the ASP technician could provide more details
  However, in most cases, the motherboard is affected and needs to be replaced.

  Welcome them

• Portege Z830-10F no display - power light flashes

  Hello

  I have a problem, when Toshiba Portege Z830-10F of loading, the screen is off, flashes of light of energy Green two times two times yellow and repeated, the screen will not turn on.
  What it means?

  (PC was left alone in the night on table)
  I try to disconnect the battery and load without it, it did not help.

  Indicator DC IN (first on the left):
  Flashing orange indicates a problem with the power supply, initially, you should try plugging the adapter into a different power outlet. If she does still not work, please contact Toshiba support in your country.

  ((Deuxieme power light to the left):
  Flashing orange indicates that the computer is in mode 'sleep' and that there is enough available power (mains or battery adapter) to maintain this State. In sleep mode indicator lights for a second and off for two seconds.

  Also try this.
  Remove the battery, disconnect the adapter, press and hold the power button / stop along 30 sec.
  Now connect the battery and AC adapter and turn on the device.

• Qosmio F20 won't start - power light flashes orange

  My Qosmio F20-149 crashed yesterday and I was not able to get it working again. When I try to turn it on, the power light flashes on and outside (on: 1 sec, off: 1 sec) and the cooler fan operates at full power. When I press a key, there is a genre or a sound error. otherwise no reaction of the laptop; even the CD player does not open.

  I did no RAM-implementation to date, and I use the original power supply Toshiba. I tried from the laptop using only the battery, only power and on both. No change in the reaction. I tried all possible combinations (with a free one, both... etc) of my two cards, RAM (512 + 512) and still no use.

  I am really puzzled.

  If I understand you just your laptop sends a blink code. Copy the following code appears so laptop has detected a problem with the electronic power supply.
  In this case, there is nothing that you can do and the laptop must be sent to the service provider allowed the closest.

  They have manuals containing instructions and the exact description of the code how do I solve this problem.
  Sorry, buddy, but I do not think that anyone here can offer an accurate diagnosis for that matter.

• Satellite A - power light turns on but nothing happens

  The laptop does not start. The power light turns on but nothing happens. Before that, error message 0 x 0. has been posted.

  Can anyone suggest what to do?

  Hello!

  It sounds like a hardware malfunction...

  Try this workaround: remove the battery and the AC adapter. Wait one hour and then reconnect the battery and the AC adapter. Now, try to restart the laptop.

  I put t know what laptop you have exactly but if it doesn t work you should go to an authorized service provider. Technicians can check your laptop.

  Good bye

• HP Envy 23 all-in-one. : HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs.

  HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs. After that I opened start legacy and power cord from my puss. Help me please.

  Hi there @ZiECloNE,

  Welcome to the Forums of HP Support!  I understand that you are no longer able to boot your computer after a "event for pets.  I'm happy to help you with this.

  Don't forget to check all of your connections, power cord, power adapter, and maybe try another outlet and a direct connection to wall.  If there is no change then the following test: desktop HP - computer starts not (Windows 10.8)

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Portege M100 does not start - power light flashes orange

  Hi all

  I have a Portege M100.
  Since ysterday, the computer does not boot. When I push the power button, I hear the noise of the fan starts working, but nothing else happens. The power light continues to blink in orange.
  I removed the battery and tried to turn on the computer with the AC adapter is plugged in, but nothing changes.

  Any ideas on what could be the problem? I would appreciate help,
  Thanks in advance

  Yalin

  Hi mate,

  could possibly be the RAM, so please check the RAM modules and remove 1 module if you have 2 of them installed.
  Otherwise, I check if some another module of RAM is available and install the module of well known work. If this is not sufficient then I strongly recommend you to bring your machine to a service partner chartered for a balance of health/repair of equipment.

  Please give some information about your situation...

  P.S.: you can try to remove the battery and AC and leave the machine without power for about 24 hours. Maybe it helps?

  Welcome them