Process begins but does not (reader 10.1.0)

Similar Questions

• Windows XP Professional SP3 recognizes D DVD/CD-RW drive in my computer, but does not read the content.

  Control Panel indicates that the COMBI RW16x10/DVD unit. Properties indicate that a new disc has no free space.  Does not read CDs or DVDs with the content.  All indications from the Panel indicate that "device is working properly", but I can't read anything. Updated and modified drivers and troubleshooting I tried without success.

  Troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  Please click on the link below and follow the steps as indicated on the page. This should solve the problem.

  http://support.Microsoft.com/kb/321641

  MD MOEEN AJAZ KHAN (MCP)

• my dvd - rw cd playback, but does not read the dvd.

  I have computer fz190 portable vaio, the interesting thing that, previously, my laptop read DVDs and now does not read, while my device to read the CD.

  Hi MAHDI roozzi,.

  1 when was the last time it was working fine?
  2. what happens when you try to play a DVD?
  3. you receive an error message?
  4. you have any CD to third parties | DVD burning software installed on the computer?

  First run the fix it tool available in the link below and check if it works.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  If the previous step fails and then uninstall any third-party CD | DVD burning software installed on the computer and check.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD/CD rom drive reads CDs but does not read the DVD.

  My Dell Inspiron 1300 laptop has a DVD/CD rom drive.  It loads all the CD I want and them automatically opens on the D drive.  When I put in a DVD movie it will not play.  I open my computer, and then look at the D drive, and it does not even recognize that there is a DVD inside but it shows a screen of a CD that I put in there.  This tells me that it works and it has a green light on the side which shows.  Also, when I insert the DVD it makes sounds as it tries to recognize, but then it stops and does not appear.  Can anyone help?  I really appreciate it.  I'm not very savvy computer.  I know that some in this topic because I am a teacher and try to catch up with things, but I'm certainly no computer technology.  Thank you very much!  Let me know if I need to give more info.  I think the reader is Sony CRX835EK but I'm not 100% sure on this one here.

  If your Player reads cd but not dvd which indicates that the material works very well. You need to change the registry inorder to solve this problem.

  1) click on the start menu
  2) click on 'run '.
  (3) type "regedit" and click ok
  4) go to the key of the string "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}.
  (5) delete "upper filters" and "lower in the right window.
  (6) right click on my computer in the start menu.
  7) click on properties
  8) go to the Hardware tab
  9) click on Device Manager
  (10) expand the dvd/cdrom drives
  (11) made a right click the dvd rom and click on uninstall
  (12) restart the computer

  After the reboot, windows should automatically install a ROM clean disc and read DVDs very well if you have the correctDVDdecoders

  

  .

• Satellite A300-1 M 1 - skates from CD/DVD, makes noise but does not read the CD

  I own a laptop Satellite A300 - 1 M 1

  He reads some DVD, windows media player or VLC, but fails to read CDs and many DVDs

  The drive is recognized in Windows Vista. I updated the drives and rebooted. Then removed from devide Manager and rebooted. The removal of the UpperFilters and LowerFilters registry and restarted it again.

  The problem is it exactly even. I can read a DVD (DVD movie) but not a CD (with data). I can read both disks on a different laptop.
  When I insert the DVD, the disc spins and in few seconds it appears in windows Explorer and can be played with Windows Media Player or VLC, for example. When I insert a CD with the data, CD towers, there is slippage noises, at different speeds. The mouse cursor changes briefly shhowing a disc below it, the orange light flashes, but after some 40 seconds or so only a message appears "Please insert a readable disc. Needless to say, I tried several different CD. Only DVD movie I managed to read on the player.

  The drive is listed on the device as a Manager:
  HL-DT-ST DVDRAM GSA - T50N

  The CMN Satellite A300 - 1 M 1 are:
  Intel CoreDuo P8400 2.26 GHz
  4 GB OF RAM
  I'm using Windows Vista (as it was installed on this laptop)

  What can I do to fix this?

  Hello

  I think that there is not much to buddy
  I think that it s a CD/DVD drive problem
  There might be something wrong with the lens of laser disk or disks are not totally compatible

  You could try burning the disks on another computer and could attempt to read copied discs

  Otherwise you will need a new CD/DVD drive

• CD/DVD drive works, but does not read the CD

  Upgrade to Windows 7, last week. All right.  In the past days, have been ripping the CD for my MP3 player.  Tonight, the CD/DVD stopped reading media.  I can see the drive in Windows Explorer.  When I click on the drive icon in the WinExplorer, the drawer opens for loading; However, when I insert a CD and close the drawer, read access / the light blinks but nothing to indicate that the CD is actually read.  CD new no scratches.  Anyone have any idea how to solve this problem?

  If this is a brand new CD, the CD's may be defective or your disk may need an update of firmware to understand a new type of media.

  The laser may be dirty or co - is told in passing is not.

• Tecra M2 - DVD/CD drive does not read

  I have a Tecra M2 with the DVD Rom/CD burner.

  When a disc is inserted, it runs but does not read - light stays on. After a few eject and reinsert the cycles he usually manages to play the disc. Long the standing problem which affects different DVD and CD discs. Have used a disc cleaner to clean lens.

  Does anyone know if this is likely a faulty hardware or a driver problem?

  Thank you

  Search on the Toshiba site.
  For the Tecra M2 is updated firmware for some ODD available s. To check if you have such a unit.

  In addition, I would like to make a BIOS update. This you can also find on the Web from Toshiba site
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• TouchSmart HP ENVY 15-j009wm: TouchSmart HP ENVY 15-j009wm does not read USB Flash Drive after Downgrade to Windows 7

  I've demoted installed Windows 7 with Flash Drive but I need help. Windows 7 doesn't read my Flash drive more? He can read my USB keyboard but does not read a USB Flash drive.

  I have no Internet on the computer, so that means I can not update my drivers. And I have a few drivers in my flash drive I want to install, but I can't.

  I read this: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-ENVY-TouchSmart-15-j040us/td...

  It not me any more because I can't access my USB drivers

  Hello:

  Looking at your other posts it seems that you have yourself painted in a corner.

  Since there is no inheritance or the setting USB auto in the BIOS, your only option would be to remove the hard drive, then put it in a USB drive enclosure sata hard laptop, plug in another PC so it can be read, download the drivers there, you need and copy to you user profile on the hard drive removed.

  Chapter 5 maintenance manual provides the procedures of withdrawal and replacement for the hard drive.

  http://h10032.www1.HP.com/CTG/manual/c03733656

  Reinstall the hard drive, run the drivers, and you should be good to go.

  These would be the drivers you need for your model...

  SM bus controller: install this first and reboot.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_127691_1

  USB3: Install these two and restart.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_139250_1&swEnvOid=4058

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_133037_1&swEnvOid=4058

• does not read dvd-video

  My Envy 17-1181nr just got Win7, reinstalled by HP.  Now, the player plays BluRay very well but does not read the DVD-video.  The drive makes noise, a video DVD of loading then the video starts and stops a few seconds.  I uninstalled the device and reinstalled with the updated drivers.  Suggestions welcome.  Bill

  Hi Bill,

  My mistake, I forgot that your laptop is a slot player.

  You should find that any store computer will store a disc, which you can load into the reader who will perform the cleanup - the disc itself was fine on brushes that will clean the lens.  The only point I want to emphasize, is to make sure that when you ask one of these discs, make sure what you say it's for portable optical drive as some are not suitable for the drives in the computer.

  Kind regards

  DP - K

• XI (11.0.09) drive sometimes starts the process but does not appear in applications or open on desktop

  On windows 7 64 bit. Sometimes reader XI (11.0.09) begins the process but does not appear in the applications. In this case however the application is started for example start menu, double-click on pdf, double-click AcroRd32.exe. He

  11.0.09 is put on hold for us - supported by 11.0.08 solves the problem

• I have trouble reading my Yahoo email. It highlights a message but does not open the e-mail message.

  Hello. I have trouble reading my yahoo mail. It highlights a message, but does not open it. Can someone help me?

  Thank you.

  Contact Yahoo support. It's their program.

  http://help.Yahoo.com/l/us/Yahoo/helpcentral/

• Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

  Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

  CD/DVD players use different lasers to read CD DVD vs.  Eventually, your DVD laser has grilled.  It might be time to replace your CD/DVD drive.

  HTH,

  JW

• My laptop does not read the dvd, but another laptop computer bed. PL advise solution. Thank you

  My laptop is Pressario V2000. My laptop does not read the dvd, but another laptop reads the same dvd. PL is the solution. Thank you

  Try another DVD to verify that your laptop can read at least the other DVD.  If he can't play other DVD's then you need to replace the DVD - CD ROM drive supplied with your Pressario.

  Another thing you can try is to check fingerprints or scratches on the DVD, some DVD players are more sensitive than others.

  J W Stuart: http://www.pagestart.com

• I have works suite 2005-but my laptop does not read so good

  but my laptop does not read if good, Cd is in gd condition, how can I get better results when need to use it?

  Clean the cd with water / use it on another machine to test his condition. Try a different brand cd to test the drive.

• HP DVD Writer does not read or write DVD, but only the CD

  My HP DVD 1135t burner does not read or write DVD but only the CD. What is the problem? Please help me.

  CD/DVD players use different lasers for reading/writing DVD from the CD.  All indications would point to your laser DVD as having failed.  You could try to remove your drive and install it in another computer to see if the problem follows your player or your computer, but my bet is that the drive must be replaced.

  HTH,
  JW