Professional Vista... several incomplete restoration... unspecified error when Sync IPhone

Similar Questions

• I get the message "unspecified error" when you try to create a system restore point

  That this is an autofocus of startoff a I have create, fSystem restoration returns with 'unspecified error', he never worked on my laptop.

  Can anyone help? Thks

  Hi somnop,

  1. What antivirus do you use?

  2. do you get any specific error code?

  Follow the steps below and check, if it helps.

  Step 1:

  Disable all security software and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Do SFC scan and check if the problem is related to corruption in the file system.

  Step 3:

  I know that you cannot create a restore but point as a test, try to do System Restore in safe mode and check if you are able to restore.

  Note: Restart the computer in normal mode after the test.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Unspecified error when burning DVDs with windows media player DVD is empty when starting get coded, then when control burn error occurs and does not burn the disk. How to fix this?

  I get an error when I burn DVDs with windows media player. He asked correctly when I lad the DVDs that I choose to burn a dvd disc. Then I add my video fles she adds and lists. Then I hit burn and it starts to create the dvd disc. All my files are wmv files. The bar regarding % moves to 100% but captured along with burning the disc, he rejected and I get an unspecified error message. with just a button to hit, which will close the error box. The files don't burn the disk accordingly. The disc remains empty.

  Hi N2tjq,

  Are a. When you facing this problem?

  B. is - what happens with all DVDs?

  C. recent changes made on the computer?

  I firstly you suggests to save the project to your computer, and then try to burn on a DVD at a slower burning speed.

  Choose a speed slower burn to your DVD recorder as follows:

  1 back to adding photos and video to the DVD page and then click on Options.
  2. in the DVD burner speed box, select medium or slow.
   
  Change-Windows-DVD-Maker-DVD-Video-settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  If the problem persists, download the service pack 2 for windows vista on the computer
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  See the link below:

  Error message when you try to publish a movie to a DVD using Windows DVD creation in Windows Vista: "unspecified error".
  http://support.Microsoft.com/kb/949281 
   
  For more information, please see the links below:

  Burn a DVD video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  If you use windows media player, see the link below:
  Burn-a-CD-or-DVD-in-Windows-Media-Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
   
  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 'Unspecified error' when opening customize

  When I right click on the desktop and select Personalize, it says 'unknown error '?

  I can't even change any theme...
  It all started when I download a new theme from the internet and it worked well for a few days and that one day, when I turned on my pc to start it says to check some bad programs and fix it he did. After that was done my taskbar went gray and the theme was not working so I downloaded again. He did download but always the taskbar has not changed from grey and when I click on the Customize, it says ' Explorer.EXE... unspecified error. "

  Amount of the fine now, seems like there was a problem with the aero theme patcher...

• 'Unspecified error' when you deploy by using EPMA

  So far, the symptoms include (11.1.2.1 Version):
  
  • When you create a new Member account with the same properties as his brothers and sisters, the application will validate, but abandonment of deployment of an "unspecified error".
  • If this member is removed the application will be deployed successfully.
  • I created a member of different account in a separate part of the hierarchy, with the same properties of Member exactly like his brothers and sisters and get the same "unknown error."
  
  The same error occurs when you try to add a new Member, not just a new account.
  
  The associated transaction log deployment has failed is below:
  
  Error reference number: {26061716-0113-4A8B-9EB9-C93A019097B9}
  NUM: 0x80004005; Type: 0. DTime: 2011-08-08 21:49:36; SVR: ServerName; File: CHsvMetadata.cpp; Online: 1056; Worm: 11.1.2.1.000.3082;
  NUM: 0x80004005; Type: 0. DTime: 2011-08-08 21:49:36; SVR: ServerName; File: AgentHelper.cpp; Line: 1223; Worm: 11.1.2.1.000.3082;
  NUM: 0x80004005; Type: 0. DTime: 2011-08-08 21:49:36; SVR: ServerName; File: CHfmAwbAgent.cpp; Line: 665; Worm: 11.1.2.1.000.3082;
  
  In the EPMA journal, we had three following errors:
  
  [EPMADIM] [INTERNAL_ERROR:32] [EPMADIM-1] [EPMADIM.Hyperion.CommonServices.Exceptions.BaseException] [tid: 22] [ecid: disabled, 0] SVR_ERR_SECURITY_INVALID_SESSION:Invalid to Hyperion.JobManager.JobManagerProxy.DeleteJobs (sessionID Guid, Int32 [] jobIDs) Session
  
  [EPMADIM] [INTERNAL_ERROR:32] [EPMADIM-1] [EPMADIM.Hyperion.CommonServices.Exceptions.BaseException] [tid: 22] [ecid: disabled, 0] SVR_ERR_ARRPROP_VAL_MEMBER_NOT_FOUND:Member ID 5699 does not exist in the dimension of '8 '. At Hyperion.DimensionServer.Proxies.PropertiesProxy.InternalEnumPropertyCategoriesForMember (MemberLocator index)
  
  [EPMADIM] [INTERNAL_ERROR:32] [EPMADIM-1] [EPMADIM.Hyperion.CommonServices.Exceptions.BaseException] [tid: 22] [ecid: disabled, 0] SVR_ERR_CANT_CREATE_DUPLICATE_DIMENSION_NAME: failed to create the name of the Dimension in duplicate. to Hyperion.DimensionServer.Proxies.ApplicationsProxy. <>c__DisplayClass3e. (b__3d) < IncludeDimension >
  
  
  Any suggestions on how I can get this app to deploy new members?
  
  Thank you
  
  Ryan
  
  Published by: user11948410 on August 9, 2011 06:01

  Please kill the HsvDatasource.Exe, HsxServer.Exe and also Security.Exe CASE process in windows Task Manager on all servers applications HFM and Redepoly the Application.

• BlackBerry Smartphones "Cannot access local files" error when syncing with Outlook

  I have an old BlackBerry Bold 9780 which works well. However, just yesterday, I started getting a "Cannot access local files" error when you try to use BB Desktop to synchronize with Microsoft Outlook 2016. I uninstalled and reinstalled the BlackBerry Desktop Software 7.1, but the problem persists. There is no error when using Outlook or other aspects of synchronization in BB Desktop.

  I am running 64-bit Windows 10 on my desktop computer. I got no synchronization issues in the past until yesterday. To my knowledge, nothing has changed.

  A Google search for the error message returns questions posted on several different forums, but there is no clear solution given.

  The problem seems to be in Outlook, rather than with the BlackBerry Desktop, at least in my case. I solved it by repairing my Microsoft Office installation. For most versions of Office, this is accomplished by going to the list of programs installed in the Control Panel, highlight and right-click on the desktop and select the option to repair or change.

• BlackBerry Smartphones "Cannot access local files" error when syncing with Outlookl

  I have an old BlackBerry Bold 9780 which works well. However, just yesterday, I started getting a "Cannot access local files" error when you try to use BB Desktop to synchronize with Microsoft Outlook 2016. I uninstalled and reinstalled the BlackBerry Desktop Software 7.1, but the problem persists. There is no error when using Outlook or other aspects of synchronization in BB Desktop.

  I am running 64-bit Windows 10 on my desktop computer. I got no synchronization issues in the past until yesterday. To my knowledge, nothing has changed.

  A Google search for the error message returns questions posted on several different forums, but there is no clear solution given.

  The problem seems to be in Outlook, rather than with the BlackBerry Desktop, at least in my case. I solved it by repairing my Microsoft Office installation.  For most versions of Office, this is accomplished by going to the list of programs installed in the Control Panel, highlight and right-click on the desktop and select the option to repair or change.

• I get the message "unspecified error" when I try to restore my PC. can anyone shed a light on this

  I'm trying to restore my PC and get the same message every time, he reads "unknown error" can anyone help please

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• Vista Ultimate 32-bit gives errors when installing

  I tried 7 times to install SP2, and it is down just 7 times, with 3 different errors: 80242016 (9/19), 80246067 (10/1), 80004005 (10/1), 80242016 (11/15), 80242016 (today) and 80004005 (twice now). I also noticed that some other updates do not appear to be installed correctly, for example KB974306 supposed to be properly installed on 10/14, but Windows Update tried to reinstall twice on 11/15, twice failed them. These updates do not appear in Windows Update now. Exactly the same story for KB954155, KB968816 (initial installation 9/9), KB856744 (8/23), KB961371 (8/23), and the list goes. All this had an installation failed twice on 11/15. Today, I have disabled Symantec Antivirus before the first installation, tried this before either: http://support.microsoft.com/kb/971058 and KB947821 installed before the third attempt. The only possibility I can think of questions is that I disabled some services when I did the initial Setup, but I don't remember what they were, but I don't think they had anything to do with updates. Any ideas?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• BlackBerry Q5 Microsoft C++ Runtime Error when Sync Q5 to the Outlook 2007 calendar

  Attempt to synchronize my Q5 in the Outlook 2007 calendar I get an error message that indicates:

  Runtime error!

  Program:ResearchinMotion\BlackberryLlink\BlackBerryLink.exe. The application requested execution in an unusual way. Please contact the support team of the application for more information. >

  I am running Windows XP and Office Professional 2007.

  I had the phone for over a year and only recently developed this problem. I uninstalled my programs BlackBerryLink and my downloads and re-installed 3 times. Whenever I try to sync it takes 19-22 minutes 'have the BlackBerry schedule status information"before the error message appears. I checked and the calendars only synchronization are home and BBLink.

  @BlackBerryHelp sent me to a knowledge base article blck.by/1wEvCts on Lotus Notes even after that I told him 3 times I used Outlook not Lotus Notes. Then they told me to contact "Windows".

  So far, I missed 1 very important meeting because the appointment was not in my phone. Help, please! I love my Q5 BB and I REALLY need my calendars in sync!

  The options are limited.  If you call Microsoft at 1 (800) 642-7676 I think they will tell you the same thing.  I don't know what to suggest because Windows XP is no longer supported, and the runtime may be outdated.

• BlackBerry Smartphones Intellisync error when syncing with Bold 9930 (issues of the Organizer)

  I recently received the following error message Intellisync trying to sync my Bold 9930 with Outlook: "error occurred. Error code: 0x80043ac9. See the documentation.

  Someone has any idea how to solve this problem? My Organizer phone and Outlook is more 'talk' between them, which is not a good thing.

  I am on Verizon and I have 7.1 Bundle 457 loaded on my phone.

  Hello blackpowerbunny,

  The following article should provide you with more information on the 'encountered error. Error code: 0x80043ac9. See documentation"message that you receive when you try to synchronize your smartphone from BlackBerry using the BlackBerry® Desktop Software:

  BlackBerry Desktop Software displays the error message "error code: 0x80043ac9 - http://www.blackberry.com/btsc/KB25869 .

  We hope this helps.

  Thank you.

• BlackBerry Smartphones connector specific error when sync with Outlook calendar

  Installed Outlook2007.  Address, tasks, and notes will be synchronize everything with my BB 8830.  However, the calendar gives me an error message;  "Connector specific error" after reading the calendar of my camera.  The entire synchronization process stops.  When I uncheck the 'calendar', then the rest of the shares will be synced to the top.  Any ideas?

  Hi and welcome to the forums!

  Here is an article on how to solve the problem.

  Thank you

  Bifocals

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB15294&sliceId=SAL_Pub...

• 12.4.3.1 iTunes crashes when syncing iPhone installed 6 9.3.5

  As it is said, iTunes force crashes/closes unexpectedly when you try to sync with my iPhone 6. It is a problem, too I had with previous versions of iOS and the phone seems stuck after saving the phone, usually the last stage, or more generally during one of the steps: "waiting for items to synchronize." When I quit iTunes then reconnect the phone, it tends to go very well. That doesn't happen whenever I have clocks and is random. Was wondering if others have this problem and what could be done to remedy this.

  What you do is now very well. "Pending items to synchronize" is sometimes, especially after a system update in a long process, in order to not jump ship too early. You can also try performing a reset, while the device is connected to iTunes, but iTunes recovery generally works better.

  ------

  Try these standard troubleshooting steps.

  Reset: hold the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  If this does not help, you may need to restore your iPhone: https://support.apple.com/en-us/HT204184

  If your backup in iTunes, make sure that it is an encrypted backup.

• Error Msg: syncing iPhone new 6 + requires a newer version of iTunes

  I have a desktop Mac OS Mac. 10.7.5 X.  and iTunes version 12.2.2.  I get an error message that I need the most recent version of iTunes.  I do an update for iTunes and it says I have the latest version.  Still, I can't sync my iPhone error message bc.

  Any help would be appreciated.

  josephpio97 wrote:

  I have a desktop Mac OS Mac. 10.7.5 X.  and iTunes version 12.2.2.  I get an error message that I need the most recent version of iTunes.  I do an update for iTunes and it says I have the latest version.  Still, I can't sync my iPhone error message bc.

  Any help would be appreciated.

  The latest version of iTunes is 12.3.2 and requires a later version of Mac OS X. The latest version of iOS requires the latest version of iTunes. See the system requirements for the Mac version of iTunes.

  Mac system requirements

  Material:

  • Equipped Mac to an Intel computer
  • To play videos HD 720 p, an iTunes LP or iTunes Extras, a 2.0 GHz Intel Core 2 Duo or faster processor is required
  • To play HD 1080 p video, a 2.4 GHz Intel Core 2 Duo or faster processor and 2 GB of RAM is required
  • 1024 x 768 or higher screen resolution; 1280 x 800 or greater is required to play an iTunes LP or iTunes Extras
  • Internet connection broadband to use music from Apple, the iTunes Store and iTunes Extras
  • Apple combo drive or SuperDrive to create audio, MP3 or CD backup; some non-CD-RW recorders can also work. Songs from the catalog of Apple's music cannot be burned to a CD.

  Software:

  • OS X version 10.8.5 or later, Apple music requires OS X version 10.9.5 or later
  • 400 MB of available disk space
  • Apple music, Radio Music from Apple, iTunes in the cloud and iTunes game availability may vary depending on the country
  • iTunes Extras requires OS X version 10.10.3 or later

• Computer stops with a blue screen with error fatal when the iPhone is connected

  I know it may not related to windows but I have tried other sites on this issue. My computer stops and a blue screen appears with the message saying fatal error when the iPhone is connected. I tried with or without iTunes installed.

  First without iTunes installed, windows will be asked to USB drivers for the iPhone, but I couldn't find anything on the Apple Web sites if I click No., a message appeared, saying that it might not work properly because he could not recognize my device. Second, I have the latest version of iTunes installed, windows began to recognize my iPhone but stop immediately after that with a blue screen fatal error and messeage saying updating the BIOS. Updated the BIOS of the computer, but nothing helped.

  My computer runs on Windows XP Home Edition SP3, processor Intel Core Duo 1'66 GHz, 2 GB Ram, Intel GMA 950, Intel 945 GM chipset.

  I thought that it requires no USB driver for iPhone on Windows or same iTunes unless I wanted to use it for synchronization or characteristics. Please forgive me if I'm wrong, because I tried it on other computers and it had no problem with the USB drivers and Windows can install by itself.

  Thank you.

  Hi 1980ckc,

  1. have you tried to connect the iPhone to a different USB port?

  You can check out the apple support link and check if it hleps:

  iPhone, iPad and iPod touch: Windows displays a blue screen message or stops when you try to connect to your device.

  http://support.Apple.com/kb/TS1502

  Also check out the apple discussion link:

  http://discussions.Apple.com/message.jspa?MessageID=10339681

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.