Profile Cisco MXE problem

Similar Questions

• Not able to connect to restart/profile/finder keychain problems

  I am able to connect to my user profile on my iMac (27-inch, late 2013) using OS X 10.11.4.  The first thing that appears is ' Keychain 'login' is not found to store 'localdevicexxxxx-AuthToken.' " "Followed by several other errors in keychain.  Then Finder continuously restarts / the office/bar along the top icons flashes (the dock is still there).  I can't use Alfred to start Contacts if I'm fast enough between Finder restart, but nothing else will start.  I was able to connect to the guest profile and to create another Admin account without problem, but is the difficulty of my profile.  I've been Googling for a bit, but have developed dry.  Hoping you guys have any suggestions!   Thank you!

  By far the best way to solve this problem would be to restore from a backup previous to it. You have such a backup?

• Cisco VPN problem with security update KB3057839 for Vista

  Someone had problems with any connection Cisco VPN works after the installation of update of security KB3057839 for Vista? When this update is installed, the pop-up to enter the password and user id not come, need to use the Task Manager to close the program. The first time I went back to the restore point to get my VPN to work, this time I tried to reinstall the VPN but that doesn't work anymore. I started to uninstall updates (had 7 of them), when I got to it, KB3057839, the VPN began working again.

  Mike

  See this on the real issue:

  http://www.chiark.greenend.org.uk/~sgtatham/PuTTY/wishlist/Vista-update-breaks-config.html

  It turns out that the logon dialog box is invisible, but still, it agrees to enter you your password and LOG you!

• Speech recognition Profile Import Export problem

  I have problems to import a profile that I put in place.  I'm upgrading my hard drives often, so I'm always import and export of different profiles.  I have run the little program "Speech Profile Manager" and I export my profile (by default and only one), but when I go on the new computer, same version of vista and everything, I get huge errors and it does not matter.  This is how it goes down:

  I have not a single program open, just after a clean boot:

  1. I run the speech profile manager

  2. I click on "Import", I find the file to import and say OPEN.

  3. it is said so "do you wish the profile imported by default?"  I click Yes

  Image here: http://tagr.org/images/Default_Profile.jpg

  4. He said to them 'the microphone settings must be granted before use... You want to now? "I click Yes.

  Speech at startup and then switch to sleep mode and that this error pops up:

  WARNING: Engine target () of the profile is not available.

  Profile data has been imported, but won't work for the missing engine.  If you install the engine at a later date, please fun the microphone Wizard.

  And then 1 million errors is the first:

  "ERROR: cannot create (Files\1033\L1033.tpc) key in the registry." Please make sure that the speech is installed and that no programs that use speech (for example) are open, and then try again.

  Image here: http://tagr.org/images/Yes_To_Mic_Wizard.jpg

  If I say no the Microphone Wizard, I get an another huge list of errors, but a different number:

  "ERROR: cannot create the key (Files\TrainingAudio-0409-10C902C1-A71A1D60) in the registry." Please make sure that the speech is installed and that no programs that use speech (for example) are open, and then try again.

  Image here: http://tagr.org/images/No_To_Mic_Wizard.jpg

  I don't even have office on this computer.  Profile is certainly not the profile, I spent months tweaking. It's a blank profile.

  I tried Yes and no on each option, micro USB plugged out, jack mic 1/8 '' plugged in, I tired it work on 3 different Installations of Vista. I tried to re - export profile several times. I get a similar set of mistakes every time.

  Help!

  The software that you are using was built in fact older versions of Windows and is not listed as compatible with Windows Vista. I apologize because I was under the impression that you imported files to an old Windows XP system running the Tablet PC edition or Office 2003 because the error indicating "target engine () of the profile is not available." and the use of the older tool. Resource: speech recognition Profile Manager tool

  Speech recognition Profile Manager tool is now obsolete, because vocal training files can now be migrated using the Easy Transfer Wizard. The wizard is available for Windows XP via download and integrated in all Installations of Windows Vista.

  To transfer voice (including the training files) user profile settings, please perform the following steps:

  -Click on the ORB start and type EASY in the search bar, click Windows Easy Transfer icon that appears - this will launch the wizard:

  

  -Click Next - select start a new transfer
  -Choose my old computer
  -Choose to use a CD, DVD, or other removable media (even to memorize the settings on the local hard disk)
  -Select the external hard drive or to a network location (even memorize settings on the local hard disk)

  

  -Under Choose a network location, you can use the parameter to copy the files to your local hard drive by default:

  

  -Choose any user account or my user account
  -If you make a transfer from one account to another on the same computer or on a single account on another computer, then you choose the my account of yser option

  -Choose advanced options will give you the choice to transfer only specific items in your account
  -You can use this for example to transfer only files sounds and speech recognition and clear all other check boxes
  -Once your choice, click on the wizard checks to see what items are able to transfer
  -At this point, you will notice that all the items that are selected to be transferred, by default all data application, Documents, items of office and preferences, Internet Explorer, and Windows settings are selected whose sounds and speech recognition:

  
   
  -Here you can choose again customize to select specific items you would like to be transferred after clicking on the transfer of your objects will be stored at the selected location

  -To import all items to another profile on the same computer or on another computer, you will need to re-run the wizard and select a current transfer and a new computer, and then point to the location of the files previously exported.

• How do I change the input on the LCD 65 profile Cisco

  We recently had a Cisco TelePresence given 65 profile system. We have all the documents and I could not find instructions on the lcd screen. The screen has several entries and RS232. I would like to know how to change the input to the screen. Could someone explain to me how it would happen? I guess its more rs232 because I can't find any button on the unit. Is there an API for the screen? What are the communication settings for the screen?

  Any help is appreciated more.

  Thank you

  James

  Double post - see https://supportforums.cisco.com/discussion/12742796/how-change-input-cisco-profile-65-lcd-screen

• Cisco RV042G problems?

  Hello

  Im having a problem with a router cisco RV042G and im hoping that someone could give some advice.

  I have two Cisco 1720 routers and router RV042G. I use the RV042G as a "border" router, which gives access WAN/internet outside of two 1720 routers.

  The two 1720 routers are connected to each other (ports eth0 on both) with crossover. Also, each 1720 router is also connected to one of the 4 ports on the RV042G router switch. The fa0 on each 1720 router port is connected to its own switch with customer (s)

  Logically, it is what is the page layout...

  

  I have configured all interfaces whose IP correct using VLSM. The two LANs are on their own subnet, and each router to router connection is on its own subnet.

  I have configured RIP version 2 on the two routers in 1720 and also on RIP on the RV042G and configure it to send and receive updates V2. RIP version 2 is working great between all three routers.

  View the routing on the two routers in 1720 table is perfect. They RIP routes to each subnet and also received a route RIP of the border for the WAN to the outside router.

  Both routers are also capable of ANYTHING, ping clients on both sides, each router interface, the border and outside addresses WAN router.

  My problem is with the customers. Both Clients can ping EVERYTHING except the border router (RV042G). They can ping each other, they can ping all the interfaces on the routers of 1720, but they cannot ping the RV042G or whatever it is in addition to the WAN (where customers will receive their internet from)

  Im a little confused. If it were another manageable router as the 1720 I could get this race. Throw the NAT on the router to border and move on with life. But because it is a router in the web interface, I can't seem to understand why clients cannot reach the border router when two routers have RIP routes and can ping it very well.

  The firewall on the RV042G is completely right now, as well as client firewalls.

  Here is the config of the two 1720 routers:

   outhfieldRouter#show run Building configuration... Current configuration : 799 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname SouthfieldRouter ! boot-start-marker boot-end-marker ! ! no aaa new-model ! resource policy ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ip subnet-zero ip cef ! ! no ip dhcp use vrf connected ! ! ! ! ! ! interface Ethernet0 ip address 172.16.7.138 255.255.255.252 full-duplex ! interface Ethernet1 ip address 172.16.7.131 255.255.255.248 full-duplex ! interface FastEthernet0 ip address 172.16.7.65 255.255.255.192 speed 100 ! router rip version 2 passive-interface FastEthernet0 network 172.16.0.0 no auto-summary ! ip classless ! no ip http server ! ! control-plane ! ! line con 0 line aux 0 line vty 0 4 login ! end SouthfieldRouter#

   TroyRouter#copy run start Destination filename [startup-config]? Building configuration... [OK] TroyRouter#show run Building configuration... Current configuration : 792 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname TroyRouter ! boot-start-marker boot-end-marker ! ! no aaa new-model ! resource policy ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ip subnet-zero ip cef ! ! no ip dhcp use vrf connected ! ! ! ! ! ! interface Ethernet0 ip address 172.16.7.137 255.255.255.252 full-duplex ! interface Ethernet1 ip address 172.16.7.130 255.255.255.248 full-duplex ! interface FastEthernet0 ip address 172.16.7.1 255.255.255.192 speed 100 ! router rip version 2 passive-interface FastEthernet0 network 172.16.0.0 no auto-summary ! ip classless ! no ip http server ! ! control-plane ! ! line con 0 line aux 0 line vty 0 4 login ! end TroyRouter#

  I had a model of plotter package physical layout that worked very well. Packet trace is not similar to the RV042G router, so I used three of the same routers.

  Anyone have any ideas?

  Thanks in advance

  > Both Clients can ping EVERYTHING except the border router (RV042G).

  based on this, I hope that RV042G did not know where to send the icmp response - i.e. RV042 is missing information on both client subnets. ICMP echo is received successfully by RV042G, but the response is sent to the wrong direction (default route to the internet?).

  > RIP v2 is working great between all three routers.

  How did you get this? can you show us routing table from at least RV042G router? for me, for some reason any RIP routing updates are not accepted/Treaty by RV042 router.

  1720 routers configuration seems perfect, part of RIP configuration as well and routing updates to be sent out of all interfaces except Fa0 interfaces.

• CISCO RVO42 problems to connect to Internet and continues to give up internet connection

  I just bought for a new router in WAN VPN Cisco RV042 Duan (Small Business Series) Firmware version 4.0.08 - tm (released January 14, 2011). 1 WAN is configured to obtain an IP automatically add and 2 WAN is TRP with the username and password provided by our ISP. The two WAN configured for load balancing mode (auto). State of two WAN is connected, but most of the time only adds WAN 1 shows the WAN IP, DNS, etc. While WAN 2 Add sometimes shows WAN IP, DNS, etc, but most of the time 2 WAN is equal to zero all the. When this happened, I click on connect and sometimes it worked, but most of the time he cut it on the connection and everything will go back to zeros.

  1 WAN works too, but most of the time he gave up the connection to the ISP. I continue to live lost internet connection.

  I don't know what the problem is with my setups, the firmware or the router. Attached are snapshots of the basic configuration of the router.

  I'm disappointed because I thought when I bought this router that it can provide me with a more stable connection but after three days of usage, I have more difficulty to connect to the internet and my boss scolded me already. Help, please!

  

  

  

  

  Hello Gary,.

  My name is David Aguilar, and I'm a support with Cisco Small Business Support Center Engineer. Sorry you are having these problems. Several things:

  First of all, you will want to upgrade to the latest version of the firmware (version 4.1.1.01). It can be found here: http://www.cisco.com/cisco/software/release.html?mdfid=282414010&softwareid=282465789&release=4.1.1.01&relind=AVAILABLE&rellifecycle=&reltype=latest

  Second, if you use both WAN interfaces, you will need enable HTTPS protocol binding. If (encrypted) HTTPS traffic is distributed between the two WAN interfaces, it can cause instability when you browse to secure Web sites. To avoid this, you must direct all HTTPS traffic on a specific interface.

  To do this, go to system management > Dual WAN and select HTTPS as the service. Enter your LAN range as the IP source address and the 0.0.0.0 - 255.255.255.255 as the address IP of Destination. Simply bind HTTPS to the WAN 1 or 2 WAN.

  You can refer to the following screenshot:

  

  If you still have questions, please call us at the 1-866-606-1866. We are open 24/7 and would be happy to help you.

• Authentication (Windows Server 2013) AD Cisco ISE problem

  Background:

  Has deployed two Cisco ISE 1.1.3. ISE will be used to authenticate users wireless access admin WLC and switches. Database backend is Microsoft running on Windows Server 2012 AD. Existing Cisco ACS 4.2 still running and authenticate users. There are two Cisco WLCs version 7.2.111.3.

  Wireless users authenticates to AD, through works of GBA 4.2. Access admin WLC and switches to the announcement through ISE works. Authentication with PEAP-MSCHAPv2 access and admin PAP/ASCII wireless.

  Problem:

  Wireless users cannot authenticate to the announcement through ISE. This is the error message '11051 RADIUS packet contains invalid state attribute' & '24444 Active Directory failed because of an error that is not specified in the ISE'.

  

  Conducted a detailed test of the AD of the ISE. The test was a success and the result seems fine except for the below:

  xxdc01.XX.com (10.21.3.1)

  Ping: 0 Mins Ago

  Status: down

  xxdc02.XX.com (10.21.3.2)

  Ping: 0 Mins Ago

  Status: down

  xxdc01.XX.com

  Last success: Thu Jan 1 10:00 1970

  March 11 failure: read 11:18:04 2013

  Success: 0

  Chess: 11006

  xxdc02.XX.com

  Last success: Fri Mar 11 09:43:31 2013

  March 11 failure: read 11:18:04 2013

  Success: 25

  Chess: 11006

  Domain controller: xxdc02.xx.com:389

  Domain controller type: unknown functional level DC: 5

  Domain name: xx.COM

  IsGlobalCatalogReady: TRUE

  DomainFunctionality: 2 = (DS_BEHAVIOR_WIN2003)

  ForestFunctionality: 2 = (DS_BEHAVIOR_WIN2003)

  Action taken:

  Log Cisco ISE and WLC by using the credentials of the AD. This excludes the connection AD, clock and AAA shared secret as the problem.

  (2) wireless authentication tested using EAP-FAST, but same problem occurs.

  (3) detailed error message shows below. This excludes any authentication and authorization policies. Even before hitting the authentication policy, the AD search fails.

  12304 extract EAP-response containing PEAP stimulus / response

  11808 extracted EAP-response containing EAP - MSCHAP VERSION challenge response to the internal method and accepting of EAP - MSCHAP VERSION such as negotiated

  Evaluate the politics of identity

  15006 set default mapping rule

  15013 selected identity Store - AD1

  24430 Authenticating user in Active Directory

  24444 active Directory operation failed because of an error that is not specified in the ISE

  (4) enabled the registration of debugging AD and had a look at the logging. Nothing significant, and no clue about the problem.

  (5) wireless tested on different mobile phones with the same error and laptos

  (6) delete and add new customer/features of AAA Cisco ISE and WLC

  (7) ISE services restarted

  (8) join domain on Cisco ISE

  (9) notes of verified version of ISE 1.1.3 and WLC 7.2.111.3 for any open caveats. Find anything related to this problem.

  10) there are two ISE and two deployed WLC. Tested a different combination of ISE1 to WLC1, ISE1 to WLC2, etc. This excludes a hardware problem of WLC.

  Other possibilities/action:

  1) test it on another version WLC. Will have to wait for approval of the failure to upgrade the WLC software.

  (2) incompatibility between Cisco ISE and AD running on Microsoft Windows Server 2012

  Did he experienced something similar to have ideas on why what is happening?

  Thank you.

  Update:

  (1) built an another Cisco ISE 1.1.3 sever in another data center that uses the same domain but other domain controller. Thai domain controller running Windows Server 2008. This work and successful authentication.

  (2) my colleague tested in a lab environment Cisco ISE 1.1.2 with Windows Server 2012. He has had the same problem as described.

  This leads me to think that there is a compatibility issue of Cisco ISE with Windows Server 2012.

  
  

  
  

  Yes, it seems that 1.1.3 doesn't support Server 2012 as of yet.

  External identity Source OS/Version

  Microsoft Windows Active Directory 2003 R2 32-bit and 64-bit

  Active Directory Microsoft Windows 2008 32-bit and 64-bit

  Microsoft Windows Active Directory 2008 R2 64-bit only

  Microsoft Windows Active Directory 2003 32-bit only

  http://www.Cisco.com/en/us/docs/security/ISE/1.1/compatibility/ise_sdt.PDF

• download ICC profiles... problems zip files

  Try to download Iflord photo paper profile... when I go to the reel-er takes me to the internet with a commentary on basis that these files are corrupt?

  Hello

  1. What is the exact error you get when you download ICC profiles?

  2. the problem persists only when downloading ICC profiles?

  In color management, an ICC profile is a set of data that characterizes a color input or device output or a color space, according to standards promulgated by the International Color Consortium (ICC). Profiles describe the attributes of the color of a particular device or looking at a requirement by defining a mapping between the source of the device or target color space and a profile connection space (PCS).

  Each device that captures or displays the color can be profiled. Some manufacturers provide profiles for their products, and there are several products that allow an end-user to generate its own color profiles, usually by the use of a colorimeteror of tristimulus preference a spectrophotometer.

  Good day!

  Answer please if you face concerns.

• Numbering on Cisco SX20 problem

  Hi team,

  We use the SX20 Cisco for TP.

  I can call on remote site using IP without any problem but when I compose the post IP #. (48.45.45.45 ##2002), the call is not placed.

  then ask a remote site to call us.

  Please suggest why this is happening or is there any codec setting. Us do not use any MCU server or any h.323 or sip proxy guard.

  Thank you

  IP Ext #. (48.45.45.45 ##2002) is the method of numbering owner of Polycom that is not supported by Cisco/TANDBERG systems. You use [email protected] / * / or [email protected]/ * / _address, so instead use 48.45.45.45 #2002, you would dial [email protected]/ * /-I hope the people you are trying to call has their properly configured side so it will support Annex O, which is be the standard of the ITU.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• 515E Cisco configuration problem

  I made a simple configuration for a Cisco 515E on Oct, this year. A small office use it for surfing the net.

  Now, they want to set up a web site for themselves. So, I did a static nat for their Web server:

  public static x.x.29.198 (Interior, exterior) 192.168.1.1 mask subnet 255.255.255.255 0 0

  But then, I found a problem. Although I can ping any Web site successfully for the internal Lan, but I don't ping IP global to the web server (x.x.29.198), and I can't ping external IP address of the firewall (x.x.29.194) too.

  On the other hand, I ping the x.x.29.198 (or 194) from the Internet and I can ping the 192.168.1.1 of the internal Lan.The web service also seems very good.

  There can someone tell me how to solve this problem? Thank you.

  Hello

  This isn't a problem and everything works fine. Since the internal local area network, you won't be able to ping the global address of the web server or the PIX outside interface. The ASA PIX won't will not allow this.

  Hope that helps.

• T61, Vista Business with Cisco VPN problem since the last update on the Lenovo site.

  Hello

  I use a T61, Vista Business, Cisco VPN Client v.5.0.02.0090.  Since my last update, October 2, 2008 on the Lenovo ThinkVantage Productivity Center site, I can't connect to my VPN Office. It was working perfectly before this software update. The only thing I remember is the update of the driver for Intel 4965AGN card v.12.x. I went to v.11.5 but it's not better.

  When I try to connect, I get the message "secure VPN connection terminated by a peer. "433 reason: (reason unspecified peer). I did a test with 'ping' IP address of the VPN and the response of the address.

  Usually, when the VPN Client is able to make the connection in the network connection window, I see "connection to the network space 2 (the Cisco VPN system map)" enabling / disabling Disable to activate the State. But there in my case, turn it off.

  I can connect with another PC using Windows XP. Thus, the VPN works.

  Any ideas?

  Thank you

  I met a very similar problem with my X61s. I was able to fix this by removing the print reading software for which an update was also installed on 2 Oct. As I barely use the fingerprint reader, it wasn't a problem for me. The Cisco VPN worked never better...

• Cisco VPN problems after installing the 506e

  My apologies if this makes no sense, because it is my 1st install of a PIX.

  I distance support external sites and had a Cisco VPN 4.6.00.49 connection through our Linksys router for access, company which worked a treat. We asked to have VPN access to our society, so I replaced the Linksys with a 506th PIX. I ran the Wizards(Yes I heard the gasps from 90% of you then) GUI access Internet out worked, came from e-mail in Exchange server and external users could vpn in our internal network. Great, I thought!

  BUT NOW

  I have a problem with coming out through the 506th pix VPN.

  My client connects to the external site. Authenticates the Logni & assigns a valid IP address. Unfortunately I couldn't make a ping, rdp or anything with the remote network.

  Thanks in advance

  Paul

  Paul

  Sorry, I wasn't clear on my post - that the order was necessary on the remote device. In any case I'm glad to hear his work.

• Profile lens Corrections problem

  I recently dug a Sigma 70-300 APO lens (supported in LR 5.3) that I have not used for some time and imported some photos taken with this lens in LR 5.3.

  I have an import preset that a Lens profile verified Corrections. However, after importation, the lens correction is not applied - the 'allow the Correction profiles"box is checked, but under"Lens Profile"'Make' it shows just 'None '. If I manually select Sigma in the box ' Do ' the good lens is then applied to the boxes 'Model' and 'profile '.

  As I said, the lens is supported and shows herself to be taken care of after I chose to do.

  I tried to screw up the "Préférences" folder

  Can anyone throw any light on this? It's kinda a drag to have to manually select something that should be automatic.

  Hi KevetS,

  Unfortunately, choice of automatic objective profile does not always work with lenses non - OEM (it has to do with poorly matched metadata).  On the plus side, we anticipated this and provided a way in Lr to customize your default lens profile settings so that you must manually switch the selection process of profile for each of your images.  Here's what you do:

  1. open an image taken with the lens.

  2. go in the goal to develop Correction, then select Activate profile Corrections.

  3. choose the manufacturer suitable for the lens in the popup to Make (Sigma in this case). LR will try to automatically find the correct profile now.

  4. If Lr cannot find the right profile automatically after step 3, then choose the appropriate model for the lens in the popup of model and the desired the profile popup profile (it looks that you need not do so in this case).

  5. choose Set new lens profile by default from the context menu.

  In the future, newly imported images taken with this lens should automatically get matched with the right profile. In this way, that you don't have to go through manual selection. Basically you are "teacher" Lr what metadata (ID information) is your goal, using an example image.

  You can repeat these steps for each lens that has this problem.

• Cisco Multicast - problem of Cluster control point

  Hi all

  Now I've been troubleshooting an issue where in my security team in which they are unable to form a cluster with two devices of control point. (internal interfaces E1 on both).

  They told me that the cluster Protocol (CCP) uses multicast to form a cluster.

  Two internal interfaces are connected to my core of the switches (FEX) which are two Nexus 5Ks, which I think has some limitations regarding multicast transmissions (Please correct me if I'm wrong)

  From the online support literarure, I learned to know that disable the IGMP snooping on the switch Cisco Nexus Core is a workaround.

  My query is, is there any special way from PRI? If I disable the IGMP snooping it will affect all other areas of my network?

  Thanks in advance.

  I prefer to use IGMP snooping as planned, i.e. with an IGMP applicant if there is no Layer 3 interfaces with PIM.