Profile corrupted - once again!

Similar Questions

• REDUX: Opening of user profile has no... Once again!

  This issue has been spoken for several years, and there is still no cut and dried "fix" for it. I don't understand why Microsoft can't take time to address this problem. Before ask you, I spent 3 hours today, reading as many positions as possible, looking for resolution and spent a few hours trying to each of them, but I failed to locate a fix that works on my computer.

  I have Windows 7 Home Premium. I use a Dell Inspiron desktop computer. I tried everything that was recommended, but nothing has worked. You (the Forum) have recommended changes to the registry and remove the problem account, however, in my case there is NO account not listed other than the default, my personal account and the guest account. So, I ask, once again, for a PERMANENT solution to this problem. I don't think I'm too ask.  Microsoft has created a bit of sophisticated software, and yet they are not able to solve this problem? Strange. I would like to hear from members of the forum who have solved their problem of logon. Thank you!

  Hello

  Please go through the steps in the article, create a new user account, then check the steps in the section, fix a corrupted account and also check the steps mentioned under advanced information

  http://support.Microsoft.com/kb/947215

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  It will be useful.

• the blocked sites listed in options disappear when the browser is closed. have to list them all once again, if I want to disturb.

  Listed in a short list of sites from where I want Firefox blocks cookies (doubleclick, for example), following the instructions on https://support.mozilla.com/en-US/kb/Enabling%20and%20disabling%20cookies. However, when I close the browser, the next time I open it, the list is empty. Of course, I get cookies from the sites I want to block.

  Hello

  You may need to disable the Preferences of Site in (Alt + T) Tools > Options > Privacy > settings. Please also see that.

  ...............................................................................................................................

  Useful links:

  Everything on tools > Options

  Beyond the tools > Options - about: config

  Subject: config entries

  Which is preferably that? module -quickly decode about: config entries - after installation, go inside on: config, right-click preferably, enable (check) results of MozillaZine Board, and once again right-click a pref and choose MozillaZine reference first.

  Keyboard shortcuts

  Files & Firefox profile folder

  Safe mode

  Problematic Extensions/add-ons custom

  Troubleshooting Extensions and themes

• LMS 3.2 (solaris 10) - user tracking: once again "ogs_server_urn" not found! Errors

  LMS 3.2 on a solaris 10 server that had problems with ctm_config.txt in the past (https://supportforums.cisco.com/thread/2033941) now once again has problems with the device Selector in UT. There are FATAL errors of type it below connected to CampusOGSServer.log:

  [Tue 19 Oct 18:27:22 CEST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /[email protected]/ * defined //System groups inaccessible devices
  [Tue 19 Oct 18:30:52 EST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /-Server
  [Tue 19 Oct 18:33:03 EST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /[email protected]/ * defined //System groups inaccessible devices
  [Tue 19 Oct 18:35:04 CEST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /-Server/Pre-deployed
  [Tue 19 Oct 18:35:05 EST 2010] FATAL Com.cisco.nm.xms.ogs.server.GroupCacheImpl getHierarchy no first-level cache for: /[email protected] / * /-Server/User Defined groups

  To create failure I'm going to UT > reports > generator-online Switch Port report > Switch Port summary
  The switch of the device that opens contains all devices and clicking the search button produces the following error:

  Problem with file /WEB-INF/screens/deviceselector/DeviceFilter.jsp! URN_NOT_FOUND: urn 'ogs_server_urn': not found!

  also, the following error is located in /opt/CSCOpx/MDC/tomcat/logs/stdout.log:

  October 18, 2010 14:18:49 org.apache.catalina.core.ApplicationDispatcher invoke

  SERIOUS: Servlet.service () for servlet jsp threw exception

  com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND: urn 'ogs_server_urn': not found!

  at com.cisco.nm.xms.ctm.client.CTMCall.establishIPC(CTMCall.java:238)

  to com.cisco.nm.xms.ctm.client.CTMCall. (CTMCall.java:218)

  to com.cisco.nm.xms.ctm.client.CTMClientProxy. (CTMClientProxy.java:64)

  at com.cisco.nm.xms.ctm.client.CTMClientProxy.getProxy(CTMClientProxy.java:180)

  at com.cisco.nm.xms.ogs.client.OGSServerProxy.init(OGSServerProxy.java:179)

  at com.cisco.nm.xms.ogs.client.OGSServerProxy.init(OGSServerProxy.java:98)

  to com.cisco.nm.xms.ogs.client.OGSServerProxy. (OGSServerProxy.java:85)

  at com.cisco.nm.xms.ogs.client.mgmt.OGSRuleExpressionUtil.getServerProxy(OGSRuleExpressionUtil.java:102)

  at com.cisco.nm.xms.ogs.client.mgmt.OGSRuleExpressionUtil.getClassDefUtil(OGSRuleExpressionUtil.java:123)

  at com.cisco.nm.xms.ogs.client.mgmt.OGSRuleExpressionUtil.getInternalClasses(OGSRuleExpressionUtil.java:153)

  at com.cisco.nm.xms.ogs.client.mgmt.OGSRuleExpressionUtil.getClasses(OGSRuleExpressionUtil.java:174)

  at org.apache.jsp.WEB_002dINF.screens.deviceselector.DeviceFilter_jsp._jspService(DeviceFilter_jsp.java:158)

  at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

  at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)

  at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)

  at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)

  at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:692)

  at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:594)

  at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:506)

  at org.apache.jasper.runtime.JspRuntimeLibrary.include(JspRuntimeLibrary.java:966)

  at org.apache.jasper.runtime.PageContextImpl.include(PageContextImpl.java:614)

  at com.cisco.nm.uii.taglib.framework.ContentAreaTag.doStartTag(ContentAreaTag.java:76)

  at org.apache.jsp.WEB_002dINF.screens.popup_jsp._jspx_meth_embu_contentarea_0(popup_jsp.java:876)

  at org.apache.jsp.WEB_002dINF.screens.popup_jsp._jspService(popup_jsp.java:693)

  at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

  at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)

  at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)

  at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)

  at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:692)

  at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:470)

  at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:405)

  at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)

  at org.apache.struts.action.ActionServlet.processActionForward(ActionServlet.java:1758)

  at com.cisco.nm.uii.UIIController.processActionForward(UIIController.java:380)

  at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1595)

  at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:491)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)

  at com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)

  at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)

  at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)

  at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)

  at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)

  at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)

  at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)

  at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:199)

  at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:282)

  at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:754)

  at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:684)

  to org.apache.jk.common.ChannelSocket$ SocketConnection.runIt (ChannelSocket.java:876)

  to org.apache.tomcat.util.threads.ThreadPool$ ControlRunnable.run (ThreadPool.java:684)

  at java.lang.Thread.run(Thread.java:595)

  I checked the file ctm_config.txt in the directory campus and cmapps, removed the files ctmregistry and ctmregistry.backup from/opt/CSCOpx/MDC/tomcat/webapps/campus/WEB-INF/lib, deleted all files and directories below/opt/CSCOpx/MDC/tomcat/work/Standalone/localhost/and restart the services.
  No change...

  What I noticed by looking directly in the database of the CMF is that "CampusOgsGroupCacheTable" is completely empty where the following tables contain data:
  CampusOgsGroupPropertiesTable
  CampusOGSTagTable
  CampusUserGroupAssociationTable

  What could be the reason for this behavior?

  I still thought of the option to export all groups of CMF (or at least groups of campus) and delete all tables of OGS and re-import the groups but when I try to do it I get the following error:

  [email protected] / * /-server #. / perl./OGSCli.sh u admin
  Enter the password for the CiscoWorks:
  Authentication succeeded.
  INFO: Type EXIT to exit from OGSCli guest at any time.
  Enter a task OGSCli [export]: export
  Enter a filename of export groups:./OGSGroupExport.info
  WARN: The details of the group in the selected file will be replaced by new groups of export information. Do you want to continue? (y/n) [n]: y
  Enter a name of group hierarchy defined by the user to export or the full export of all groups defined by the user of all of the applications [all]: all the
  INFO: Hierarchies of groups defined by the user in all the applications that are installed in all servers, will be exported to. / OGSGroupExport.info.
  Authorization succeeded.
  ERROR: Could not export the specified groups, user-defined hierarchies in. / OGSGroupExport.info.
  ERROR: This could be due to one or more of the following reasons:
  ERROR: * OGSServer process may not work
  ERROR: * remote server consolidation or Application may not be accessible
  ERROR: * lack perhaps of free disk space
  ERROR: * you do not have the required file permissions to create the file.
  ERROR: See /var/adm/CSCOpx/log/CMFOGSClient.log for more details.
  [email protected] / * /-server #. / perl./OGSCli.sh u admin d
  Enter the password for the CiscoWorks:
  Authentication failed.
  Check the username and password you entered.
  [email protected] / * /-server #.

  just to be sure, I download the 2 files ctm_config.txt...

  Instead of setting DYNAMIC_PORT_ALLOCATION = 0, replace perms on both ctm_config.txt 0444 files, use the original port and see if UT works.  If so, run in this configuration for some time see if corruption returns.  It should not since casuser won't be able to write to the file.

• If I have my Mac factory reset can I download my Adobe CC once again, as I have only one user?

  If I have my Mac factory reset can I download my Adobe CC once again, as I only have one profile?

  I need to factory reset my Mac but use it to say that I would have used my only or can I download it again on the same machine?

  You can install cc on an unlimited number of computers.  the only practical limitation is that you need to access the computer to 'sign-in' on any computer that you want to use with cc.

  So yes, you can reset your computer without problem.  You can logout of cc before restoring it, but even if you forget you can disconnect from your computer no more-non-existent after reset using a new connection attempt.

• If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch

  If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch.

  Hello Anshul230499,

  Thank you for using communities of Apple Support.

  If a download was interrupted in the Mac App Store, then whenever you have new Internet download should then restart.

  If a download application is interrupted

  Once an Internet connection is restored, your purchased downloads should restart automatically. The Mac App Store may warn you that there is a problem with the download and ask if you want to restart downloads. Confirming will restart all pending downloads.

  Download time may vary according to the size of the file and the speed of your Internet connection. See this article on purchases made on iTunes Store for more information on the time to download large files.

  Troubleshooting the Mac App Store

  Take care.

• State Bar has disappeared, once again (November 9, 2011)

  After a few updates, today disappeared from my status bar, once again, and I can't understand how to get it back. I had status-4-Ever forever, but it's been so long that it happened that I'm not sure what to do. I messed around with it several times and restarted Firefox, but it is not it.

  "Ctr /" is the shortcut to activate the module bar, and it's the same as the view > toolbars > (check | uncheck) the module bar.

• I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  Hello Varshil07,

  Thank you for using communities of Apple Support.

  If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start.  To start, I suggest that try you to start in safe mode by following the instructions below.  For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Have a good.

• HP Pavilion 15 laptop: Short hard drive DST check failure... once again.

  A question that I had resolved a few months ago started occurring again, in which the laptop is struggling to load things when started and soon after falls down and has to be restarted. I guess that means that the hard drive has failed once again and so I have no doubt about how to solve this problem, but I write this query to ask: why? Why has a laptop, I had since not even a year at this stage has already had the same problem occur twice, even with the replacement of the piece that broke the first time? I am willing to assume that this is something to do with excessive I will admit that it is enabled for a good part of almost every day, often for several hours I play the games on Steam on it. Currently, I do not plan to have the hard drive replaced again because it is clearly an issue that will keep occurring that the way things are and if I can get a PC that won't break every time a gust of wind so it hits. Any information on why this happens and how it could potentially be avoided in the future is appreciated, especially if it offers a solution that doesn't involve payment of an exorbitant amount of money.

  The worst enemy of hard drives is heat. If you play on a computer that is pushed to the limits of the game, a lot of it can wear on a hard drive for a few months. You get a lot of activity of fan during the game? A cooling pad may be an option, or on a computer box of Grandpa instead of a laptop for the games.

• I have a 6 and when I said an iMessage that he will tell me when the person read it then it will say delivered once again so I don't know when it was read

  I have a 6 more and when I send an iMessage he tells me when the person read it then it will say delivered once again so I don't know when it was read

  I have exactly the same problem since I updated to 9.3, the 9.3.1 update didn't fix either. Apple support think it could be a software problem or operations and I have tried literally everything! Have you found a solution for this yet?

• When I change bookmarks and close firefox and open upward once again changes to my favorites are returned to what they were before, I changed them?

  When I change my favorites and the close firefox and the open upward once again changes to my favorites are returned to what they were before, I changed them?

  Try the solutions in Impossible to add, edit, or save bookmarks - how to fix

• Startup MacBook Pro-comment problems prevent health going to disk/check once again

  My 13 inch Macbook Pro running OSX 10.9.5 (said mid-2012, but it was purchased in fall 2014) has had problems starting

  A few weeks ago the computer is stuck on the loading screen (white, with the Apple and the buffering of spinning icon) without marketing properly. After you have manually turned off and left for a long time he worked well on the next test, so I took care of it has been saved and so didn't think much, and it works pretty well in recent weeks, sometimes being a little slow but that very occasionally and not debilitatingly so and it probably is not related to this problem.

  This morning it was still once stuck on the loading screen, and try again in 5 or 6 times solves nothing. The VRAM reset did not help either. After an attempt to boot into safe mode (filled a little progress bar then disappeared and the computer continued to buffer without purpose), I once again reset the NVRAM and tried a different boot safe mode, with the same results. But this time I left it half an hour or so and on the next attempt (start normally) it miraculously worked a new and everything seems functional. After a new backup with a preparation period slightly extended backup (at least half an hour on the first abandoned attempt, then at least 15 minutes, until correct on the second trial has started), although it is common on my computer, I have enough fear turn the computer off and tempt fate again, if I want to see what can be done now.

  What should I do to check the health of the disk, potentially fix it, find out why this is happening and avoid this problem again in the future?

  I decided to watch from the disk utility and am confused by the Setup program. There is an 'APPLE HDD Media HTS541010A9E662' entry in the list, with a "MacIntoshHD" paragraph below, and both have different information displayed... I ran check disk on the higher level entry and it seems to be out very well ("the Volume Recovery HD seems to be OK"), but I haven't run one on the low level input as it says my computer may be "slow and unresponsive" while doing so, and I'm not entirely sure of what use there.

  It cannot be storage associated with as I stil have 610 gb of free 1 terra (although a large part of what I have (130 GB) is in the other category for a reason any).

  How to fix the slow down time and start. | MacTip.net

  Resolve startup issues and perform maintenance on disk with disk utility and fsck

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  Repair the hard drive and permissions - Yosemite, Mavericks, Cougar or Lion

  HD recovery start:

  Restart the computer after the ring, press in and hold the ORDER et R keys until the menu screen to appear.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab, and then click the repair disk button. If disk utility reports any errors that have been corrected, then again run repair disc until no errors are reported. If no errors are reported, click repair permissions . Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  How to fix the slow down time and start. | MacTip.net

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

  Start the computer in Safe Mode, and then restart normally. It will be slower than a normal startup.

  MacIntel: Reset of the controller (SMC) system management

  Reset the PRAM and NVRAM on your Mac.

  Now, download and install the update of OS X Mavericks 10.9.5 (Combo)

• Mail is stuck in a loop, force quit/restart it closes, and then when I opened the Mail once again, the cycle starts over.

  I am El Capitan OS X 10.11.3, Mail is stuck in a loop, I was responding to a message, and I tried to send it. Now, he presents this message, and then switch to another message / desktop /, mail inbox home screen, then the loops again.   Force quit and restart it closes, then when I open the Mail once again, the cycle starts over.

  I can't use the mail app at all.

  Open the menu go with down option - Open Library - containers and move the folder "com.apple.mail" on the desktop.

  Restart your Mac and check if it works very well.

• My desktop picture won't stay as I put it. When I turn on my computer once again, it's a different picture. No one else has access to my computer, ever.

  My desktop picture won't stay as I put it. When I turn on my computer once again, it's a different picture. No one else has access to my computer, ever. Any ideas what's happening?

  Make sure you change the image is not checked...

  

  

• Photosmart B110: Problem with B110: order print wirelessly (once again!  :-()

  Hi all

  A few weeks ago, I've been here for more help (see: http://h30434.www3.hp.com/t5/Printer-Software-and-Drivers/B110-doesn-t-print-wireless-anymore-after-... )

  Then, after you apply the advice of sabretooth04 (manually in the WAP code on the LCD of the printer, it worked perfectly... until :-(a few days ago)

  Although nothing has changed: no new software, no change of position... nothing!

  Then I restarted the router, then the printer and the laptop; Once again put in the WAP code... but it does not help :-(

  The printer is doing well: all the test pages out big, like the wireless network test page.

  Please, I really need help (again)

  Greetings from the Netherlands,

  Sigrid

  P.S., as wireless worked from day one, I never used the cable and now I can not find. So for the moment I have no alternative wireless...

  Hello

  Thank you for using the forum.  You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.