Profile of xml AnyConnect
I have installed on my win7 PC anyconnect, but I'm not able to locate the profile xml file. Any idea where I should look for that?
I have already checked in the Anyconnect installation folder and could not find it.
Hello
The records in question are probably hidden by default in Windows. Change Windows settings to show hidden folders also
-Jouni
Tags: Cisco Security
Similar Questions
-
AnyConnect on logon remove other profiles of xml.
Hello
I have a problem with Anyconnect (3.1.14), when I connect with the most recent profile, it deletes the oldest xml profiles.
The xmls are for different devices. Bug?
Thank you
PS
The problem occurs only with the AlwaysOn enabled on the profile.
If you enable always - On, it will always remove all other xml desktop profiles. I've seen this happen and it is also written in one of the documents somewhere.
-
Problem of proxy with AnyConnect SBL
Hello
Recently, I added the following line to our profile of .xml AnyConnect:
IgnoreProxy We use a server proxy internally in our network, so when client computers have been set up for this, they could not connect to our ASA with AnyConnect when they were out of the site. The above setting in their corrected profile that, even if the proxy is enabled in their IE, they could connect with AnyConnect roaming. So far so good.
Yesterday, I added the following to our configuration:
TEST group policy attributes
use a MSIE-proxy-server method
Internet Explorer-proxy server value ip.ip.ip.ip:port
activate Internet Explorer-proxy local-bypass
This configuration was to ensure that the proxy of the user is enabled when connected to the VPN. According to doc Cisco proxy on the client settings automatically return to its original settings when disconnecting. This also works as expected.
But then, here is the funny thing (which is not funny at all really):
When to start the client computer and start-up of the AnyConnect client before logon Windows (SBL), I get the prompt attached when trying to connect! This only happens with SBL – not when the user connects and then starts the VPN client. I tried with different proxy user auth I know work, but I can't get through and therefor unable to connect before Windows logon. According to the doc of Cisco, the proxy settings should apply logon AFTER VPN - but it seems he's trying to use them BEFORE trying to connect when you use NFP.
No one knows why this happens? And anyone can come up with a solution (except disable proxy settings just made)?
Thanks in advance - much appreciated!
/ Rasmus
Rasmus,
Bad news... I checked the "fixed in" field in bugs.
002.005 (1002) and 002.005 (2000)
which means - it will be corrected in the new version.
Symptom:
The "IgnoreProxy" setting in the AnyConnect XML profile is not functioning when Start Before Login (SBL) is also enabled.Conditions:
Problem first observed on AnyConnect 2.4.1012 when "IgnoreProxy" is set in the xml profile. Using Start Before Login feature (SBL). Using GPOs to set the proxy before login. Most noticable when the Proxy that is set is internal/private because the AnyConnect will not be able to reach the headend device to make the anyconnect connection due to the proxy being set. Confirmed the profile is active. The "IgnoreProxy" setting in the profile is working for a non-SBL connection.Workaround:
1. This does work without SBL. For instance If you cancel SBL, logon to windows in the usual way and then start the Anyconnect client. If you then disconnect and reconnect the AnyConnect it does indeed ignore the configured proxy.
2. Disable GPO settings that push the proxy before login.
Note: If you are using GPO to launch scripts, be aware AnyConnect also now has a OnConnect scripting feature to launch scripts as well
-
AnyConnect client can not access local network
Hello
I have a problem with the Cisco anyconnect. Once clients are connected they cannot access anything whatsoever, including their default gateway.
Pool of the VPN client is on the same subnet as the LAN (139.16.1.x/24). Local network clients can access DMZ, VPN clients can ping computers on the local network, but they cannot access the DMZ.
I guess that any rule providing that traffic is absent but I m new with Cisco ASA and I m totally lost. I read as much as I could on this topic, but I do not understand which rule is necessary.
Thank you very much in advance for your support.
ASA release 9.4 (1)
!
ciscoasa hostname
activate the encrypted password of WmlxhdtfAnw9XbcA
TA.qizy4R//ChqQH encrypted passwd
names of
mask 139.16.1.50 - 139.16.1.80 255.255.255.0 IP local pool Pool_139
!
interface GigabitEthernet1/1
nameif outside
security-level 0
192.168.1.100 IP address 255.255.255.0
!
interface GigabitEthernet1/2
nameif inside
security-level 100
IP 139.16.1.1 255.255.255.0
!
interface GigabitEthernet1/3
nameif DMZ
security-level 50
IP 172.16.1.1 255.255.255.0
!
interface GigabitEthernet1/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet1/5
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet1/6
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet1/7
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet1/8
Shutdown
No nameif
no level of security
no ip address
!
Management1/1 interface
management only
nameif management
security-level 100
11.11.11.11 IP address 255.255.255.0
!
passive FTP mode
network obj_any object
subnet 0.0.0.0 0.0.0.0
internal subnet object-
139.16.1.0 subnet 255.255.255.0
network dmz subnet object
subnet 172.16.1.0 255.255.255.0
wialon Server external ip network object
Home 192.168.1.132
wialon-Server network objects
Home 172.16.1.69
Wialon-service-TCP object service
destination tcp source between 1 65535 21999 20100 service range
Wialon-service-UDP object service
destination service udp source between 0 65535 21999 20100 range
network of the NETWORK_OBJ_139.16.1.0_25 object
subnet 139.16.1.0 255.255.255.128
outside_acl list extended access permit tcp any object wialon-Server eq www
outside_acl list extended access allowed object Wialon-service-TCP any wialon-server object
outside_acl list extended access allowed object Wialon-service-UDP any wialon-server object
pager lines 24
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 DMZ
management of MTU 1500
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source any any static destination NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 non-proxy-arp-search to itinerary
!
network obj_any object
dynamic NAT (all, outside) interface
internal subnet object-
NAT dynamic interface (indoor, outdoor)
wialon-Server network objects
NAT (DMZ, external) service wialon Server external ip static tcp www www
Access-group outside_acl in interface outside
Route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
identity of the user by default-domain LOCAL
Enable http server
http 11.11.11.0 255.255.255.0 management
http 139.16.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
service sw-reset button
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
domain name full ciscoasa.srdongato.null
E-mail [email protected] / * /
name of the object CN = srdongato
Serial number
Proxy-loc-transmitter
Configure CRL
Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
registration auto
full domain name no
name of the object CN = 139.16.1.1, CN = ciscoasa
ASDM_LAUNCHER key pair
Configure CRL
trustpool crypto ca policy
string encryption ca ASDM_TrustPoint0 certificates
certificate 09836256
30820381 30820269 a0030201 02020409 83625630 0d06092a 864886f7 0d 010105
05003050 31123010 06035504 03130973 72646f6e 6761746f 313 has 3012 06035504
05130b4a a 41443139 32323033 34343024 06092, 86 01090216 17636973 4886f70d
636f6173 612e7372 646f6e67 61746f2e 6e756c6c 31353132 30353036 301e170d
5a170d32 33333535 35313230 32303633 3335355a 30503112 30100603 55040313
09737264 6f6e6761 30120603 55040513 31393232 30333434 0b4a4144 746f313a
2a 864886 30240609 f70d0109 6973636f 02161763 6173612e 7372646f 6e676174
6f2e6e75 6c6c3082 0122300d 06092 has 86 01010105 00038201 0f003082 4886f70d
010a 0282 010100d 2 295e679c 153e8b6a d3f6131d 8ea646e3 aa0a5fa9 20e49259
ca895563 7e818047 033a4e8f 57f619e9 fa93bfd5 6c44141f b0abf2c0 8b86334e
bac63f41 99e6d676 c689dcf7 080f2715 038a8e1b 694a00de 7124565e a1948f09
8dbeffab c7c8a028 741c5b10 d0ede5e9 599f38fe 5b88f678 4decdc4b b 353, 6708
cfa2fbce f58be06e 18feba56 4b2b04a1 77773ec6 5c58d2ed d7ca4f17 980f0353
138bfe65 1b1165e6 7b6f94bb ab4d4286 e900178c 147a6dba 2427f38e e225030f
0a66d1eb 5075c57e 6d77e5bb 247f5bc3 8d3530f0 49dedf2d 21a24b5f daa08d98
690183cf e82a6b8d 5e489956 c5eecdbc 7fc2365c b629a52b 126b51e2 18590ed5
c9da8503 a639f102 03010001 a3633061 300f0603 551d 1301 01ff0405 30030101
ff300e06 03551d0f 0101ff04 86301f06 04030201 23 04183016 80143468 03551d
dec79103 0a91b530 1ada7e47 7e27b16d 4186301d 0603551d 0e041604 143468de
c791030a 91b5301a da7e477e 27b16d41 86300d 86f70d01 01050500 06 092 a 8648
003cdb04 03820101 8ef5ed31 c05c684b ad2b0062 96bfd39a ecb0a3fe 547aebe5
14b753e7 89f55827 3d4e0aa8 b8674e45 80d4c023 8e99a7b4 0907d 347 060a2fe4
fa6e0c2f 3b9cd708 a539c09f 7022d2ee fb6e2cf6 82b0e861 a2839a71 1512b3ec
e28664e9 732270c 9 d1c679d9 1eaf2ad5 31c3ff97 09aae869 88677a3d b 007, 5699
ecb3032e 2dd0f74f 81f9a8fb 79f30809 723bbdbf dfef4154 5ad6b012 a8f37093
481fa678 b44b0290 23390036 042828f3 5eefdc43 ebe52d26 78934455 9b4234a9
4146 166e5adc b431f12f 8d0fbf16 46306228 731c bfeebc43 34 76984 d2e6ebbc
88ca120a 96838694 d4f32884 963e7385 987ec6b0 dfa28d49 05ba5fa8 641bcfc7
ff92ac3c 52
quit smoking
string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
Certificate 0 is 836256
308202cc a0030201 0202040a 0d06092a 83625630 864886f7 0d 010105 308201b 4
05003028 06035504 03130863 61736131 13301106 03550403 6973636f 3111300f
130a 3133 392e3136 2e312e31 31353132 30353036 35363236 5a170d32 301e170d
35313230 32303635 3632365a 30283111 55040313 08636973 636f6173 300f0603
61311330 11060355 0403130 3133392e 31362e31 2e313082 0122300d 06092 has 86
4886f70d 01010105 00038201 0f003082 010 has 0282 010100e7 a5c16e86 16c15a10
e018b868 bac7271a 30f1a3f8 ecb9c6b8 3ed4b1ad c9468f5e 287f2a7a 644f1496
c43a061e da927d09 a755b53e ed7c6a66 f2f1fb1e f944345c 86e08ce0 891c99b3
13101ab3 04963fad f91f987f 99f22a89 cd1e8c5a 5e4c026d 2cadd7b7 6620bbd1
b4a5135b 24ec886f fa061a06 dd536e96 1e483730 756c 4101 23f83a8d 944a7fbe
93c51d56 32ac0d17 ceb75f63 0ae24f07 f2c54e83 5b84ff00 16b0b899 c925c737
1765b 066 23 b 54645 bc419684 d09dd130 c1479949 68b0a779 df39b078 6fb0deb9
758b14c3 f0801faf f0ad60e1 a018ffba d769f867 3fe8e5fc 88ccc5b2 2319f5d4
617a78c4 74e7a64b 5c68276c 06ea57c1 d0ffce4b 358c4d02 03010001 300 d 0609
2a 864886 05050003 82010100 dff97c9f 4256fd47 8eb661fd d22ecea4 f70d0101
589eff09 958e01f1 a435a20e 5ed1cf19 af42e54d d61fc0ab cb2ee7ac 7fcb4513
1a44cc86 1e020d72 3a3f78d2 4 d 225177 857093d 9 f5fcf3c7 6e656d2b 54a0c522
f636b8cf 33c5ae34 ea340f32 85dff4c1 50165e7a e94de10b ced15752 0b3a76c1
2a50777b 20291106 a1a8a214 a 8 003716 680c15d4 ac3f7cc7 378f8f5f 38e3403f
f958c095 e549c8ed 4baf8cc5 bdcd230e 260754ea 953c3a4c eb01fef5 62b97e01
9f82ce6b f479dbdd 000c45af 8758b35f b4a958ee 32c4db3f 2ddc7385 dc05b0e3
78b609ba a9280841 2433ae87 5dd7a7c2 d5691068 1dc0eddc c23f99c5 3df8b1a5
aadbd82a 423f4ba8 563142bf 742771c 3
quit smoking
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Crypto ikev2 access remote trustpoint ASDM_TrustPoint0
Telnet 139.16.1.0 255.255.255.0 inside
Telnet 11.11.11.0 255.255.255.0 management
Telnet timeout 5
without ssh stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
dhcpd outside auto_config
!
dhcpd address 172.16.1.69 - DMZ 172.16.1.69
dhcpd dns 87.216.1.65 87.216.1.66 DMZ interface
dhcpd option 3 ip 172.16.1.1 DMZ interface
dhcpd enable DMZ
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL-trust outside ASDM_TrustPoint0 point
SSL-trust ASDM_Launcher_Access_TrustPoint_0 inside point
Trust ASDM_Launcher_Access_TrustPoint_0 inside the vpnlb-ip SSL-point
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-3.1.12020-k9.pkg 1
AnyConnect profiles Wialon_client_profile disk0: / Wialon_client_profile.xml
AnyConnect enable
tunnel-group-list activate
Disable error recovery
internal GroupPolicy_Wialon group strategy
attributes of Group Policy GroupPolicy_Wialon
WINS server no
value of 192.168.1.1 DNS server
client ssl-VPN-tunnel-Protocol ikev2
by default no
WebVPN
AnyConnect value Wialon_client_profile type user profiles
dynamic-access-policy-registration DfltAccessPolicy
wialon_1 Wy2aFpAQTXQavfJD username encrypted password
wialon_2 4STJ9bvyWxOTxIyH encrypted password username
remote access to Wialon tunnel-group type
attributes global-tunnel-group Wialon
address pool Pool_139
Group Policy - by default-GroupPolicy_Wialon
tunnel-group Wialon webvpn-attributes
enable Wialon group-alias
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:447ec315ae30818a98f705fb1bf3fd75Hello
You don't have NAT exemption the DMZ network to the pool of VPN traffic.
Please try to add the following statement to run:
nat (DMZ,outside) 1 source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 route-lookup
Also please delete the existing instruction manual nat "non-proxy-arp" statement, because it can cause problems like you the ip subnet address pool is identical to that of the Interior of the network.no nat (inside,outside) source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 no-proxy-arp route-lookup nat (inside,outside) 1 source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 route-lookup
Cordially Véronique -
After Anyconnect I can't access to asa and LAN
Dear all,
My office use ASA 5505 and I use anyconnect from outside (sometimes overseas), I can connect to my network and business by ASA, internet access, but I can't access ASA and LAN (network of my client). WHY?
Office 192.168.10.0/24
192.168.11.0/24 VPN
How can I solve this problem?
ASA Version 9.2 (3)
!
ciscoasa hostname
activate the encrypted password of XXXXXXXXXX
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
passwd encrypted XXXXXXXXXX
names of
192.168.11.1 mask - 192.168.11.10 local pool Pool VPN IP 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP address 192.168.10.254 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
address IP AAA. BBB. CCC DDD EEE. FFF. GGG. HHH
!
boot system Disk0: / asa923 - k8.bin
passive FTP mode
clock timezone 8 HKST
DNS domain-lookup outside
DNS server-group DefaultDNS
Name-Server 8.8.8.8
Server name 8.8.4.4
permit same-security-traffic intra-interface
network of the VPN_Pool object
subnet 192.168.11.0 255.255.255.240
network of the NETWORK_OBJ_192.168.10.0_24 object
192.168.10.0 subnet 255.255.255.0
inside_access_in of access allowed any ip an extended list
outside_access_in list extended access permit icmp any one
DefaultRAGroup_splitTunnelAcl_1 list standard access allowed 192.168.10.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm-731 - 101.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
interface NAT (outside, outside) dynamic source VPN_Pool
NAT (inside, outside) static source any any static destination VPN_Pool VPN_Pool non-proxy-arp-search to itinerary
!
!
NAT source auto after (indoor, outdoor) dynamic one interface
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 AAA. BBB. CCC DDD. 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
Activate Server http XXXXX
http 192.168.10.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-192-SHA ESP-AES-256-SHA SHA-ESP-3DES ESP-DES-SHA ESP-AES-128-SHA-TRANS ESP-AES-192-SHA-TRANS ESP-AES-256-SHA-ESP ESP-3DES-SHA-TRANS TRANS-DES-SHA-TRANS
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
Terminal registration
name of the object CN = ciscoasa
Configure CRL
Crypto ca trustpoint Anyconnect_Self_Signed_Cert
registration auto
name of the object CN = ciscoasa
Configure CRL
Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
registration auto
name of the object CN = 115.160.145.114, CN = ciscoasa
Configure CRL
trustpool crypto ca policy
string encryption ca Anyconnect_Self_Signed_Cert certificates
certificate 5c7d4156
308202d 4 308201bc a0030201 0202045c 415630 0d06092a 864886f7 0d 010105 7 d
0500302c 3111300f 06035504 03130863 6973636f 61736131 17301506 092a 8648
09021608 63697363 6f617361 31353131 31303131 31363231 301e170d 86f70d01
5a170d32 35313130 37313131 3632315a 302 c 3111 55040313 08636973 300f0603
636f6173 61311730 1506092a 864886f7 0d 010902 16086369 73636f61 73613082
0122300d 06092 has 86 01010105 00038201 0f003082 010a 0282 010100cc 4886f70d
af43a895 8c2c3f49 ad16c4b9 a855b47b 773f4245 1954c 728 7 c 568245 6ddc02ab
78 c 45473 eb4073f6 401d1dca 050dc53f cfb93f58 68087f6d 03334fc 1 53f41daa
454ff4bb 691235ab 34e21d98 4cfecef4 204e9c95 76b1b417 b5cf746c 830788b 4
60063e89 0ffe5381 42694cf8 d1be20d4 4c95d9c6 93041af2 94783de0 fe93cf67
4ad8954f 5392790b 4ded225c c3128cba 8d3ee07b f9fd2208 34b1956c be0a774a
d054a290 14316cc0 1670bdea f04c828b 7f9483fb 409fa707 fbe5a257 33597fed
ca790881 b1d4d3dc b0e1095e bf04014e 19c5cfeb f74aac57 ee39cd6e 7389cdd1
8b9421fa ee2b99ae df07fba1 0b506cd8 ea9f64c5 dd9169ad 157fcdb7 f6cfff02
03010001 300 d 0609 2a 864886 05050003 82010100 c8719770 1305bd9c f70d0101
2608f039 0dc6b058 0dfe3d88 76793 has 18 8f601dda b 8553, 893 d95e3b25 30ef7354
772f7d0b 772869d 7 372f8f5c f32992af fa2c8b6e 0f0ae4ce 4e068b8d b7916af2
affa1953 5bfd01a6 1a3c147d 75d95d8c 1122fa85 3905f27b 2474aff4 11fff24f
c305b648 b4c9d8d4 9dcf444b 9326cda3 0c4635d0 90ff8dd8 9444726c 82e002ec
be120937 0414c20a 39df72fb 76cd9c38 cde9afda 019e9230 66e5dba8 ed208eae
5faabb85 ff04f8f2 c36b724b 62ec52cc f967ee1d 1a6458fc 507a 2377 45 c 20635
2c14c431 baac678a dcc20329 4db7aa51 02c 36904 75b5f307 f1cc056d 726bc436
597a 3814 4ccd421d cb77d8f5 46a8ae69 2d617ac8 2160d7af
quit smoking
string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
certificate 5d7d4156
308201f0 30820308 a0030201 0202045d 415630 0d06092a 864886f7 0d 010105 7 d
05003046 06035504 03130863 61736131 18301606 03550403 6973636f 3111300f
130f3131 352e3136 302e3134 352e3131 1506092a 34311730 864886f7 0d 010902
73636f61 16086369 7361301e 170d 0d 323531 3135 31313130 31323136 35395a 17
3111300f 06035504 03130863 6973636f 61736131 a 31303731 32313635 395, 3046
18301606 03550403 130f3131 352e3136 302e3134 352e3131 1506092's 34311730
864886f7 0d 010902 16086369 73636f61 73613082 0122300d 06092 has 86 4886f70d
01010105 00038201 0f003082 010 has 0282 010100cc af43a895 8c2c3f49 ad16c4b9
a855b47b 773f4245 1954c 728 7 c 78 45473 eb4073f6 401d1dca 568245 6ddc02ab
050dc53f cfb93f58 68087f6d 03334fc 1 53f41daa 454ff4bb 691235ab 34e21d98
b 830788 4 4cfecef4 204e9c95 76b1b417 b5cf746c 60063e89 0ffe5381 42694cf8
d1be20d4 4c95d9c6 93041af2 94783de0 fe93cf67 4ad8954f 5392790b 4ded225c
c3128cba 8d3ee07b f9fd2208 34b1956c be0a774a d054a290 14316cc0 1670bdea
f04c828b 7f9483fb 409fa707 fbe5a257 33597fed ca790881 b1d4d3dc b0e1095e
bf04014e 19c5cfeb f74aac57 ee39cd6e 7389cdd1 8b9421fa ee2b99ae df07fba1
0b506cd8 ea9f64c5 dd9169ad 157fcdb7 f6cfff02 03010001 300 d 0609 2a 864886
05050003 82010100 00089cd 3 d0f65c5e 91f7ee15 bbd98446 35639ef9 f70d0101
45b 64956 f146234c 472b52e6 f2647ced a109cb6b 52bf5f5d 92471cb7 a3a30b63
052ac212 c6027535 16e42908 ea37c39a 4d203be9 8c4ed8cd 40935057 3fe8a537
a837c75c feff4dcc 1b2fd276 257f0b46 8fcd2a5c cbdcacec cd14ee46 be136ae7
7cd4ae0d aace54fe 5187ea57 40d2af87 cded3085 27d6f5d8 1c15ef98 f95cc90e
a 485049 4 805efa8f 63406609 a663db53 06b94e53 07c1c808 61eadcdb 2c952bee
74a0b3dd ae262d84 40b85ec5 a89179b2 7e41648e 93f0e419 3c482b29 e482d344
d756d450 8f0d9302 d023ac43 a31469a4 105c8a0c b1418907 693c558c 08f499ef
364bc8ba 4543297a a17735a0
quit smoking
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Crypto ikev2 access remote trustpoint Anyconnect_Self_Signed_Cert
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
No ipv6-vpn-addr-assign aaa
no local ipv6-vpn-addr-assigndhcpd 192.168.10.254 dns 8.8.8.8
dhcpd rental 43200
!
dhcpd address 192.168.10.1 - 192.168.10.100 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
NTP AAA server. BBB. CCC. Source DDD outside prefer
SSL-point of approval ASDM_Launcher_Access_TrustPoint_0 outside vpnlb-ip
SSL-trust outside ASDM_Launcher_Access_TrustPoint_0 point
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-4.2.00096-k9.pkg 1
AnyConnect profiles Anyconnect_client_profile disk0: / Anyconnect_client_profile.xml
AnyConnect enable
tunnel-group-list activate
internal DefaultRAGroup_2 group strategy
attributes of Group Policy DefaultRAGroup_2
DNS-server AAA value. BBB. CCC AAA DDD. BBB. CCC DDD.
Ikev2 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
internal GroupPolicy_Anyconnect group strategy
attributes of Group Policy GroupPolicy_Anyconnect
WINS server no
value of server DNS 8.8.8.8 8.8.4.4
Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
Split-tunnel-policy tunnelall
IPv6-split-tunnel-policy excludespecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl_1
by default no
activate dns split-tunnel-all
IPv6 address pools no
WebVPN
AnyConnect value Anyconnect_client_profile type user profiles
username password XXXXXXX XXXXXXXXXXXXXXX encrypted privilege 15
username password XXXXXXX XXXXXXXXXXXXXXX encrypted privilege 15
attributes of username XXXXXXX
Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
attributes global-tunnel-group DefaultRAGroup
address pool VPN-pool
Group Policy - by default-DefaultRAGroup_2
IPSec-attributes tunnel-group DefaultRAGroup
IKEv1 pre-shared key XXXXXXXXX
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authentication
tunnel-group Anyconnect type remote access
tunnel-group Anyconnect General attributes
address pool VPN-pool
Group Policy - by default-GroupPolicy_Anyconnect
NAT - to-public-ip assigned inside
tunnel-group Anyconnect webvpn-attributes
enable Anyconnect group-alias
tunnel-group Anyconnect ppp-attributes
ms-chap-v2 authentication
!
Global class-card class
match default-inspection-traffic
!
!
World-Policy policy-map
Global category
inspect the dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the netbios
inspect the tftp
Review the ip options
!
service-policy-international policy global
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:24991680b66624113beb31d230c593bb
: endHi cwhlaw2009,
You must configure a policy Split-tunnel, if you want to be able to access the internal and local network at the same time.
It may be useful
-Randy-
-
AnyConnect version 2.4 second host entry gets host entry invalid, please re-enter
Hello
I have an ASA 5520, 8.21, anyconnect 2.4 running. I have the profile on the SAA download with the customer. I have a second ASA as a VPN server and backup, they are configured as identical as possible.
If I connect to the ASA first using the hostname "vpn1.companyx.com", everything works fine. When I go to connect to the ASA second using the hostname "vpn2.companyx.com" on the anyconnect client, I receive the error "invalid host entry. the xml profile test as fine, the host entries are both be resolved in dns and the system vpn2 repsonds fine using the IP address. It seems to be a problem anyconnect...
thoughts?
-You use a url Group on an ASA and not the other?
-You have 'StandardUser' in your profile of xml. If you create a new profile with a new name that does not have this setting work?
-If you want to make it work with "StandardUser" in your xml profile, here is an example:
vpn.cisco.com
vpn.cisco.com
CSCVPNUsersThe ASA will initiate a connection to:
https://vpn.cisco.com/CSCVPNUsers
In order for the ASA to send back the proper information, that group URL would have to exist under your tunnel-group/connection profile
In the configuration:tunnel-group CSCVPNUsers webvpn-attributes
group-url https://vpn.cisco.com/CSCVPNUsers enable-heather
-
The anyconnect vpn easy vpn Remote communication problem
Hi team,
I have a problem of communication of the anyconnect vpn easy vpn Remote I´ll explain better below and see the attachment
topology:(1) VPN Tunnel between branch HQ - That´s OK
(2) VPN Tunnel between Client AnyConnect to HQ - that s OKThe idea is that the Anyconnect Client is reaching the local Branch Office network, but has not reached.
Communication is established just when I begin a session (icmp or rdp) branch to the AnyConnect Client,.
in this way, the communication is OK, but just for a few minutes.Could you help me?
Below the IOS version and configurationsASA5505 Version 8.4 (7) 23 (Headquarters)
ASA5505 Version 7.0000 23 (branch)Configuration of the server easy VPN (HQ) *.
Crypto dynamic-map DYNAMIC - map 5 set transform-set ESP-AES-256-SHA ikev1
Crypto card outside-link-2_map 1 ipsec-isakmp DYNAMIC-map Dynamics
Crypto map link-outside-2_map-65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
Crypto map interface outside-link-2_map outside-link-2ACL_EZVPN list standard access allowed 10.0.0.0 255.255.255.0
ACL_EZVPN list standard access allowed 192.168.1.0 255.255.255.0
ACL_EZVPN list standard access allowed 192.168.50.0 255.255.255.0
ACL_EZVPN list standard access allowed 10.10.0.0 255.255.255.0internal EZVPN_GP group policy
EZVPN_GP group policy attributes
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list ACL_EZVPN
allow to NEM
type tunnel-group EZVPN_TG remote access
attributes global-tunnel-group EZVPN_TG
Group Policy - by default-EZVPN_GP
IPSec-attributes tunnel-group EZVPN_TG
IKEv1 pre-shared-key *.object-group network Obj_VPN_anyconnect-local
object-network 192.168.1.0 255.255.255.0
object-network 192.168.15.0 255.255.255.0
object-group network Obj-VPN-anyconnect-remote
object-network 192.168.50.0 255.255.255.0
the NAT_EZVPN_Source object-group network
object-network 192.168.1.0 255.255.255.0
object-network 10.10.0.0 255.255.255.0
the NAT_EZVPN_Destination object-group network
object-network 10.0.0.0 255.255.255.0
destination of Obj_VPN_anyconnect local Obj_VPN_anyconnect-local static NAT (inside, outside-link-2) Obj - VPN static source -.Remote AnyConnect VPN - Obj anyconnect-remote non-proxy-arp-search to itinerary
destination NAT (inside, outside-link-2) static source NAT_EZVPN_Source NAT_EZVPN_Source NAT_EZVPN_Destination staticNAT_EZVPN_Destination no-proxy-arp-search to itinerary
NAT (outside-link-2, outside-link-2) static source Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote static destinationNAT_EZVPN_Destination NAT_EZVPN_Destination non-proxy-arp-search route
Configuration VPN AnyConnect (HQ) *.
WebVPN
Select the outside link 2
by default-idle-timeout 60
AnyConnect essentials
AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
AnyConnect profiles Remote_Connection_for_TS_Users disk0: / remote_connection_for_ts_users.xml
AnyConnect enable
tunnel-group-list activatetunnel of splitting allowed access list standard 192.168.1.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.15.0 255.255.255.0
tunnel of splitting allowed access list standard 10.0.0.0 255.255.255.0internal clientgroup group policy
attributes of the strategy of group clientgroup
WINS server no
value of server DNS 192.168.1.41
client ssl-VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
ipconnection.com.br value by default-field
WebVPN
AnyConnect Dungeon-Installer installed
time to generate a new key 30 AnyConnect ssl
AnyConnect ssl generate a new method ssl key
AnyConnect value Remote_Connection_for_TS_Users type user profiles
AnyConnect ask flawless anyconnecttype tunnel-group sslgroup remote access
tunnel-group sslgroup General-attributes
address vpnpool pool
authentication-server-group DC03
Group Policy - by default-clientgroup
tunnel-group sslgroup webvpn-attributes
enable IPConnection-vpn-anyconnect group-aliasobject-group network Obj_VPN_anyconnect-local
object-network 192.168.1.0 255.255.255.0
object-network 192.168.15.0 255.255.255.0
object-group network Obj-VPN-anyconnect-remote
object-network 192.168.50.0 255.255.255.0
the NAT_EZVPN_Source object-group network
object-network 192.168.1.0 255.255.255.0
object-network 10.10.0.0 255.255.255.0
the NAT_EZVPN_Destination object-group network
object-network 10.0.0.0 255.255.255.0
destination of Obj_VPN_anyconnect local Obj_VPN_anyconnect-local static NAT (inside, outside-link-2) Obj - VPN static source -.Remote AnyConnect VPN - Obj anyconnect-remote non-proxy-arp-search to itinerary
destination NAT (inside, outside-link-2) static source NAT_EZVPN_Source NAT_EZVPN_Source NAT_EZVPN_Destination staticNAT_EZVPN_Destination no-proxy-arp-search to itinerary
NAT (outside-link-2, outside-link-2) static source Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote static destinationNAT_EZVPN_Destination NAT_EZVPN_Destination non-proxy-arp-search route
Hello
communication works when you send the traffic of easyvpn derivation because it froms the IPSEC SA to pool local subnet and anyconnect HQ. The SA formed only when the branch initiates the connection as it's dynamic peer connection to HQ ASA.
When there no SA between branch and HQ for this traffic, HQ ASA has no idea on where to send the anyconnect to network traffic.
I hope this explains the cause.
Kind regards
Averroès.
-
AnyConnect and Aladdin eToken authentication
Hi all!
First part
I managed the Anyconnect VPN installation in our c2821 using MS Active Directory & Cisco Secure ACS v.4.2 authentication Radius Server for windows clients.
I have successfully install authentication in Windows using Aladdin eToken and logon Samrtcard (connector Microsoft's CA) certificate.
I have successfully the Microsoft certification authority certificate store of eToken.
I would like someone to answer the following questions: How can I use this certificate to authenticate the session on AnyConnect VPN?
Second part
I tried to customize local AnyConnect profile using Cisco AnyConnect Profile Editor. The only result: changed default username and default host. All other customizations have been ignored.
Here is my profile:
one
omitted omitted
omitted
false
true
false
All
true
Native
false
false
false
true
DisconnectOnSuspend
false
HardwareToken
SingleLocalLogon
LocalUsersOnly
false
Automatic
false
Anyone have any ideas?
Hello
You can control the parameters of AnyConnect session only if the activated/enabled 'controllable user' administrator for each XML attribute. For those that are controllable from the user, the user must be able to click on the 'Settings' button very close the list box drop-down server.
However, if you manually change the XML file on the local computer of the client, the next time AnyConnect connect, it will download the original version of the ASA and compares with local XML file. If the checksum does not match, it overrides the local XML file with the newly downloaded XML file.
You can change the preferences.xml file, and that you have discovered, AnyConnect will honor your changes. But the profile has most of the security settings as a Local Lan access, start before logon, Auto reconnection.
Thank you
Kiran
-
Two remote AnyConnect clients cannot get two voice via softphones?
We have a situation where two remote users of SSL VPNS cannot establish a voice call via softphones or cookie lync. They can both talk but I can't hear the other. Each user can call external or the office LAN without problems.
I'm under ASA version 9.1 (5) and v.3.1.05170 AnyConnect. Pretty basic config (purified) - any help would be appreciated!
# sh run
: Saved
:
ASA Version 9.1 (5)
!
host device name
something.com domain name
activate the encrypted password
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
encrypted passwd
names of
General pool of local pool IP 10.x.x.x - 10.x.x.y
IP local pool pool-ops-TI 10.y.y.y - 10.y.y.zinterface GigabitEthernet0/0
nameif outside
security-level 0
IP x.x.x.x where x.x.x.x
!
interface GigabitEthernet0/1
description of the inside interface
nameif inside
security-level 100
IP address y.y.y.y y.y.y.y
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/6
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/7
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
management only
Shutdown
No nameif
no level of security
no ip address
!
banner login ***********************************************************************
connection of the banner! ONLY AUTHORIZED USERS ARE ALLOWED TO CONNECT UNDER PENALTY OF LAW.
connection of the banner is a computer network that is private and can be used only in direct
banner connection explicit owner. The owner reserves the right to
banner connection monitor use this network to ensure the security of networks and respond
banner connect on specific allegations of misuse. Use of this network must
the banner sign a consent to the monitoring of these or other purposes.
connection banner in addition, the owner reserves the right to consent to a valid
application of law banner connection to search the network for evidence of a crime
banner stored within the network connection.
banner login ***********************************************************************
banner asdm ***********************************************************************
asdm banner! ONLY AUTHORIZED USERS ARE ALLOWED TO CONNECT UNDER PENALTY OF LAW.
asdm banner is a computer network that is private and can be used only in direct
banner asdm explicit owner. The owner reserves the right to
banner asdm monitor use this network to ensure the security of networks and respond
asdm banner of specific allegations of misuse. Use of this network must
banner asdm you consent to the monitoring of these or other purposes.
asdm banner in addition, the owner reserves the right to consent to a valid
application of law banner asdm to search the network for evidence of a crime
asdm banner stored within the network.
banner asdm ***********************************************************************
boot system Disk0: / asa915-smp - k8.bin
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT 1 Sun Mar 1 Sun Nov 02:00 02:00
DNS lookup field inside
DNS server-group DefaultDNS
Server name 192.168.0.0
Server name 192.168.0.0
something.com domain name
Local_LAN_Access list standard access allowed host 0.0.0.0
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer 40960
logging buffered stored notifications
logging trap notifications
record of the mistakes of history
notifications of logging asdm
logging - the id of the device hostname
logging inside 10.0.0.0 host
logging inside 10.0.0.0 host
Outside 1500 MTU
Within 1500 MTU
IP verify reverse path to the outside interface
IP verify reverse path inside interface
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any echo outdoors
ICMP allow any inaccessible outside
ICMP allow any inside
ASDM image disk0: / asdm - 721.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
Route inside 10.0.0.0 255.0.0.0 y.y.y.y 1
Route inside 192.168.0.0 255.255.0.0 y.y.y.y 1
Route inside 0.0.0.0 0.0.0.0 y.y.y.y in tunnel
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
test_VPN card-attribute LDAP
name of the memberOf Group Policy map
map-value memberOf "CN = test VPN, OR = groups of VPN, OR = Groups, OU = company, DC =, DC =, DC = com" "test VPN".
dynamic-access-policy-registration DfltAccessPolicy
AAA-server test-deviceauth protocol ldap
Max - a attempts failed 5
AAA-server baird-deviceauth (inside) host 192.x.x.x
Server-port 636
LDAP-base-dn DC = x, DC =, DC = z
LDAP-scope subtree
LDAP-login-password
LDAP-connection-dn cn = b, OU = Service accounts, DC = x, DC =, DC = z
enable LDAP over ssl
microsoft server type
AAA-server test-rsa Protocol sdi
AAA-server test-rsa (inside) host
interval before attempt-3 new
AAA-server auth-ldap-tes ldap Protocol
AAA-server test-ldap-auth (inside) host
Server-port 636
LDAP-base-dn DC = country, DC = a, DC = com
LDAP-scope subtree
LDAP-login-password
LDAP-connection-dn CN = b, OU = Service accounts, DC = x, DC =, DC = z
enable LDAP over ssl
microsoft server type
LDAP-attribute-map test_VPN
identity of the user by default-domain LOCAL
the ssh LOCAL of baird-deviceauth console AAA authentication
HTTP authentication AAA console LOCAL baird-deviceauth
serial baird-deviceauth LOCAL console AAA authentication
Enable http server
http inside x.x.x.x y.y.y.y
HTTP 1.1.1.1 255.255.255.0 inside
redirect http outside 80
SNMP-server host inside x.x.x.x trap community version 2 c
SNMP server location
contact SNMP Server
SNMP-server community
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Server enable SNMP traps entity power cpu-temperature
Crypto ipsec pmtu aging infinite - the security association
Crypto ca trustpoint trustpoint-selfsigned-vpncso
registration auto
FQDN
name of the object CN =, O =, C =, St =, =.
key pair
Configure CRL
Crypto ca trustpoint
Terminal registration
Configure CRL
Crypto ca trustpoint
Terminal registration
FQDN
name of the object CN = OR =, O =, C = St =, =.
key pair
Configure CRL
Crypto ca trustpoint
Terminal registration
Configure CRL
Crypto ca trustpoint
Terminal registration
Configure CRL
Crypto ca trustpoint
Terminal registration
Configure CRL
trustpool crypto ca policyTelnet timeout 5
SSH enable ibou
SSH stricthostkeycheck
x.x.x.x inside SSH
SSH timeout 30
SSH version 2
SSH group dh-Group1-sha1 key exchange
Console timeout 15
No vpn-addr-assign aaa
No dhcp vpn-addr-assign
No ipv6-vpn-addr-assign aaa
no local ipv6-vpn-addr-assign
no statistical access list - a threat detection
no statistical threat detection tcp-interception
NTP server 1.1.1.1 source inside
NTP server 2.2.2.2 source inside
SSL-trust outside ASDM_TrustPoint0 point
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 1
AnyConnect image disk0:/anyconnect-macosx-i386-3.1.05170-k9.pkg 2
AnyConnect profiles baird-client-profile disk0: / customer-baird - profile .xml
AnyConnect enable
attributes of Group Policy DfltGrpPolicy
value of banner! ONLY AUTHORIZED USERS ARE ALLOWED TO CONNECT UNDER PENALTY OF LAW.
value of banner is a computer network that is private and can be used only in direct
banner value explicit owner. The owner reserves the right to
banner value monitor use this network to ensure the security of networks and respond
the value of the banner of the specific allegations of misuse. Use of this network must
value of the banner a consent to the monitoring of these or other purposes.
value of server DNS 1.1.1.1 2.2.2.2
VPN - connections 2
client ssl-VPN-tunnel-Protocol
Split-tunnel-policy excludespecified
value of Split-tunnel-network-list Local_LAN_Access
something.com value by default-field
Split-dns value something.com, us.something.com
activate dns split-tunnel-all
the address value general-pool pools
WebVPN
use-smart-tunnel homepage
AnyConnect value dart modules, nam
AnyConnect value profiles baird-client-profile user type
AnyConnect ask flawless anyconnect
Group Policy 'test' internal
Group Policy attributes 'test '.
Split-tunnel-policy excludespecified
value of Split-tunnel-network-list Local_LAN_Access
activate dns split-tunnel-all
the address value it-ops-pool pools
internal testMacs group policy
attributes of the strategy of group testMacs
WINS server no
value of server DNS 1.1.1.1 2.2.2.2
client ssl-VPN-tunnel-Protocol
field default value xyz.com
username admin privilege 15 encrypted password
attributes global-tunnel-group DefaultRAGroup
test-rsa authentication-server-group
test-ldap-auth authorization-server-group
management of the password password-expire-to-days 10
tunnel-group DefaultRAGroup webvpn-attributes
the aaa authentication certificate
attributes global-tunnel-group DefaultWEBVPNGroup
test-rsa authentication-server-group
test-ldap-auth authorization-server-group
management of the password password-expire-to-days 10
tunnel-group DefaultWEBVPNGroup webvpn-attributes
the aaa authentication certificate
tunnel-group test remote access connection type
tunnel-group test-Connect General attributes
test-rsa authentication-server-group
test-ldap-auth authorization-server-group
management of the password password-expire-to-days 10
tunnel-group test connection webvpn-attributes
the aaa authentication certificate
allow group-url http://abc.xyz.com
allow group-url https://abc.xyz.rwbaird.com
type tunnel-group testMacs remote access
tunnel-group testMacs General-attributes
test-rsa authentication-server-group
test-ldap-auth authorization-server-group
Group Policy - by default-testMacs
management of the password password-expire-to-days 10
use-set-name of the secondary-username-of-certificate
tunnel-group testMacs webvpn-attributes
allow group-url http://abc.xyz.com/macs
allow group-url https://abc.xyz.com/macs
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory 26
Subscribe to alert-group configuration periodic monthly 26
daily periodic subscribe to alert-group telemetry
Cryptochecksum:aa675139dc84529791f9aaba46eb17f9
: endI confess that I have not read your config in detail, but a few tips:
-If you do split tunnel, don't forget to push a route for the entire pool VPN subnet or subnets of VPN clients
-Make sure you have the same-security-traffic permitted intra-interface
http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa81/command/ref/refg...
-If you use NAT, you must exclude such NAT inter-VPN-device traffic
-If you have ACLs (not shown) do not forget to leave your pool VPN subnet is talking to himself. Generally, it would be in the ACL entering the external interface.
at the end of the packet - trace is your friend.
NGP
-
2.5.2019 - SSL certificate incompatibility AnyConnect
Hi all
When I try to connect using autonomous Anyconnect (and not via the web), I got the SSL error message "the displayed certificate does not match the name of the site you are trying to view" (attached).
The certificate I have installed for SSL connection on the external interface got CN = testvpn.mydomain of subject and subject Alternative Name (SAN)--> DNS name = testvpn.mydomain
It seems to me that the place to connect to testvpn.mydomain, anyconnect try to connect to the IP address. I tried to remove the IP address in the list of servers in the profile, but it still does not work.
If I use Clientless (via browser), I only received this error which means the certificates installed correctly.
Is this a bug on anyconnect 2.5.2019 or are there other ways to force anyconnect to check the name instead of the IP against the certificate?
Thank you
Hello Lam,
It's great that it works very well now, so let me explain what was going on, you saw the right cert warning via Anyconnect due to the profile of xml you had deployed which included the period of INQUIRY, the machine you were experimenting with downloaded this xml file and whenever you tried to connect the warning was poping up even after the removal of the IP from the list of servers on the SAA, what happens is that you probably just the changed file and continued using the same name for the profile. If you change the profile and re - use the same name, you will need to rerun the command "" disk0 profiles LAM-XML-PROFILE of svc: / LAM - PROFILE .xml ' otherwise, the old profile even in memory and will be reused. " Once you have updated the profile and you reconnect the Anyconnect client, the new profile will be uploaded but here is the catch - you must get out of the client Anyconnect to see differently the new information, it appears that the profile has not been updated.
Hope that clarifies the issue.
Kind regards
-
Adding mobile broadband custom profiles in Windows 7
I need to create a connection profile custom mobile broadband on a number of Windows 7 computers. I learned that this could be done by running the following command:
netsh mbn add profile interface = MobileBroadband connection"name ="ProfileName.xml"
where nomProfil.xml is an XML file that is created according to the instructions available on http://msdn.microsoft.com/en-us/windows/hardware/gg487383.aspx.The problem is that I always get an error saying "Cannot load profile" when I run the command.
My XML file looks like this:
TestProfile true UserProvisioned 123456789012345 false manual DISABLE NONE
Can someone tell me what I am doing wrong?I found a solution:
Command does not work for some reason any addition of profile manually by using the 'netsh mbn Add... '. ». But add the profile using the install.cmd works. I don't know why the manual method does not work, but this method is good enough for me for now.
Make it work I have created the following files (by copy/paste in the document at http://msdn.microsoft.com/en-us/library/windows/hardware/gg487383.aspx in Notepad):
- Branding.cmd
- install.cmd
- Profiletemplate.Xml
- tag.txt
After that, I copied my logo.ico icon file in the same folder.
Then I edited the Profiletemplate.xml in order to take into account my APN, autoconnect, and other settings.
Finally, I've run install.cmd and he managed to create a new profile for me.
-
AnyConnect 4.1 - cannot get the secure gateway configuration
So I AnyConnect working on one SAA however, ASA another located in another country, I get the following error:
"Unable to get the secure gateway configuration.
I get a prompt for the username and password seems to be authentication very well however in step 'check' the profile updates this error.
I was comparing my two setups and they look identical.
Working ASA model: 5512 worm 9.1 (4)
Does not not ASA: 5510 worm 9.1 (4)
Client version: 4.1.02011
Any ideas?
Thank you
Hello, Kevin.
I know, if there is no customer profile configured on ASA, the software Anyconnect client will use the client profile by default, which is placed on the local computer (C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile) when installing Anyconnect software.
-
CIsco Anyconnect VPN with LDAP AAA
Hi there, I was hoping that someone can point me in the right direction here. I created a VPN connection profile to match anyconnect SSL entering customers. I would like to use LDAP group membership as a sine qua non for authentication. I found a few online pages on what to do about it, I followed. Unfortunately, it seems my connection profile to allow access to any user in the ldap, not only those of the ldap group database. I'll post the relevant bits of the config here in hopes that someone can point my mistake!
The idea of the config is to have the map of connections 2 by default a noaccess policy which has 0 simultaneous connections and the profile card (SSL_VPN) connection ssl to anyconnect to group_policy_SSL_VPN group policy.
local pool CONTOSOVICVPN_DHCP_POOL 10.0.5.51 - 10.0.5.254 255.255.255.0 IP mask
NAT (inside_int, any) static source NetworkGroup_Internal_networks NetworkGroup_Internal_networks Network_VPNRANGE_10.0.5.0 Network_VPNRANGE_10.0.5.0 non-proxy-arp-search of route static destination
LDAP attribute-map AuthUsers
name of the memberOf Group Policy map
map-value memberOf memberOf CN = NETWORK_CONTOSO_ASA_VPN_DLSG, OR = network, OU = resources, OU = CONTOSO, OU = security, OU = Groups, DC = CONTOSO, DC = groupynamic-access-policy-registration DfltAccessPolicy
AAA-server CONTOSOVIC_LDAP protocol ldap
AAA-server CONTOSOVIC_LDAP (inside_int) 10.0.0.45
LDAP-base-dn DC = CONTOSO, DC = group
LDAP-group-base-dn DC = CONTOSO, DC = group
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn CN = ASA_LDAP_USER, OU = network, OU = accounts, DC = CONTOSO, DC = group
microsoft server typeNo vpn-addr-assign aaa
No dhcp vpn-addr-assignSSL-trust ASDM_TrustPoint4 outside_int point
WebVPN
Select outside_int
AnyConnect essentials
AnyConnect image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
internal NoAccess group strategy
Group Policy attributes NoAccess
WINS server no
VPN - concurrent connections 0
Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
value by default-field CONTOSO.group
disable the split-tunnel-all dns
attributes of Group Policy DfltGrpPolicy
VPN - concurrent connections 0
client ssl-VPN-tunnel-Protocol ikev1 l2tp ipsec
internal GroupPolicy_SSL_VPN group strategy
attributes of Group Policy GroupPolicy_SSL_VPN
WINS server no
value of server DNS 10.0.0.45
VPN - connections 1
Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client
value of group-lock SSL_VPN
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPN_SPLIT_TUNNEL
value by default-field CONTOSO.group
activate dns split-tunnel-all
the address value CONTOSOVICVPN_DHCP_POOL poolsattributes global-tunnel-group DefaultRAGroup
authorization-server-group CONTOSOVIC_LDAP
NoAccess by default-group-policy
authorization required
tunnel-group DefaultRAGroup webvpn-attributes
message of rejection-RADIUS-
attributes global-tunnel-group DefaultWEBVPNGroup
NoAccess by default-group-policy
type tunnel-group SSL_VPN remote access
attributes global-tunnel-group SSL_VPN
address CONTOSOVICVPN_DHCP_POOL pool
authentication-server-group CONTOSOVIC_LDAP
authorization-server-group CONTOSOVIC_LDAP
Group Policy - by default-GroupPolicy_SSL_VPN
authorization required
tunnel-group SSL_VPN webvpn-attributes
message of rejection-RADIUS-
Proxy-auth sdi
enable CONTOSOvicvpn.CONTOSOgroup.com.au group-aliasYou must specify the NoAccess group policy as group policy by default for the Group of the SSL_VPN tunnel.
Remember to rate helpful answers. :)
-
Cannot connect AnyConnect Secure Mobility Client IPSec 3.0
Hello
Our company has a configuration of IPSec VPN on a Cisco ASA 5505. We previously using the Cisco VPN Client - Version 5.0.07.0410. Everything worked well with this customer to date. The problem is it is not supported in our Virtual Machine, and environment with our new version of our networks paravirtualized drivers we get the problems of inadequacy HMAC and not connect to.
I created a file .pcf with the following information for the 5.0.07.0410 customer:
Input connection: VC VPN
Description: no
Host: xxx.xxx.xxx.xxx (IP address of the Interface of the ASA VPN)
Authentication group:
- Name: The name of the Group
- Password: password for pre-shared Key
Transport:
- Activate Transport tunnel
- IPSec over UDP (NAT/PAT)
I import the .pcf file in the client, the client connects, you are prompted for AD username - everything has worked well.
We have currently met that he had to use the Cisco AnyConnect Secure Mobility Client (3.0.0629) - I tried to use the profile for that AnyConnect client editor and I can't not all profile options. I leave all the defaults preferences (Part1), preferences (Part2), backup servers, matching certificate, Certificate Enrollment and the mobility policy.
I in the list of servers, click Add. I enter in the hostname, host (the host name IP address) address and group. There are no backup servers, I change the main IPSec protocol, save the profile and place it in C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile (Win7). Open the AnyConnect Secure Mobility Client and the profile is loaded. Trying to link returns "VPN Agent is unable to establish a connection." ASA, I don't even see a connection attempts to the outgoing IP address. On the client, I can ping the ASA and connect with ordinary VPN Client.
I can't find a place to enter a pre-shared in the profile editor.
The AnyConnect client seems also not to read the .pcf files. Am I missing something here?
My package DART from the failing client is attached. Any help would be greatly appreciated!
Kind regards
Rich Alto
Rich,
AC uses IKEv2 (for IPsec) which is not yet supported on SAA. Support is planned for 8.4 ASA which is still at least a few weeks.
HTH
Herbert
-
profile wireless script problem
We have exported a profile.xml wireless and add a script it's just that he worked for a few days and could not keep asking for a password when they connect, the profile is added but without password
Well, to help remedy this situation, I exported the profile wireless to an .xml file and created a script with the following text:
netsh wlan add profile filename = "Wireless Network Connection profile. XML ".
However, for some reason, on most laptops, it creates the profile but when trying to connect to it.
but he always asks password security key (although it is in the .xml file). This actually makes the script useless, because we really do not want to give all users.Anyone know what is happening here?
Hello
I suggest you post the same question in the TechNet forum and check if it helps.
http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads
Maybe you are looking for
-
Why have we not 'Forums to Support Palm' application in the App Catalog?
Whenever I have a problem with my pre, I reached my computer to access this forum. It's my bridge here, why don't we have an application (like craigslist) for the "Palm Support Forums" in the App Catalog? Pre is a multitasking phone and he can handle
-
How can I configure fax through my eptson printer all in one
I am runnig windows XP Pro service pack 3
-
Stand-alone voip router configuration
Hello I'm pretty new to the part of Cisco's IPT. I am planning to buy a Voip router, but don't know if I want it is possible. See the attachment for the installation I plan on the building. Cisco 881 must register with the VOIP provider. A phone numb
-
Upgrade to cs5 cs3 with the error
I try to install CS5 upgraded to my computer. He agrees the CS5 upgrade key, but when I go to select the current CS3 product in the list, it does not accept this series as a serial number valid. I get the error "this serial number is not for a produ
-
LOV dependent criteria (for research purposes)
HelloI use Jdeveloper 11.1.2.4.0, I have created dependent LOV in my display object and run it in my Page, it works fine.but when I want to search for data using criteria of the ADF, a problem which is about dependent LOV.How can solve this problem.T