profile settings

Similar Questions

• Loading staff/profile settings

  Hi, I use Windows Vista Home Premium and whenever I turn on my Sony Vaio desktop computer, it fails to load my personal settings and profile - that is, I can still use my computer, but I can't see or access my documents and when I open Internet Explorer, all my favorites have disappeared. I tried restarting the computer as stopping completely & turning turn it back on. But still does not work.

  Does anyone have advice as to how I can get my personal profile/settings to load?

  Thank you
  Wei

  Hello

  It gives you a temporary profile? If you have ADMINISTRATOR access, you should be able to find your old
  files under the account name C:\Users\Old, where C: is the drive where the users are on.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Several connection profile with the profile settings of 'master' unique in force.

  I am trying to install "existing" of several user profiles that, as soon as the opening of session will load automatically the parameters of a "master" profile  This "master" profile will be updated periodically by the administrator.  I want to eliminate the need for the administrator manually copy the update 'master' profile to all existing user profiles.  Instead, in the case of each user login they would automatically have profile settings updated, while now the permission level for each user.  I'm not a computer scientist, but I am sufficiently well informed to be able to follow some fairly general instructions.  I'm very grateful for any input.  Windows 7 Ultimate

  Could only be done through the development of a custom software that must be run under the main administrator account and would update the respective user accounts directly.  A task force in and of itself would be particularly useful, but I guess that computers A and B distinct users that may be useful.
  What you want to do would be best addressed with a true Windows server and domain that would allow the creation and the management groups and a lot of administrative control.

• Regional profile settings

  Dear,

  How can I configure settings regional profile?

  Hello

  Regional profile settings

  step 1:

  1. In /home/localconfig , create the following file:/atg/userprofiling/userProfile.xml
  2. Edit this file to include the new locale. Locale is defined in the dps_user table, under the locale property. Specify a language code and country, as defined by the ISO 639 and 3166 respectively, for each of the new locale. Separate language codes and country using underscore, for example it_IT . You must also provide a unique code for each locale. When you are finished, your userProfile.xml file will resemble the following:

  
 
   

  
     
       
       
     
   
 


  3.GetProfile.SetPropertyValue ("locale", en_US);

  Concerning

  G.KaviMani

• Manager of sharing profile settings

  In any case to push sharing settings of the profile manager who does not post installation script script or login?

  You might try to push the "custom settings" to the device or set of instruments, but there is no nice way AFAIK.

  C.

• HP 250 G3 laptop: the profile settings of Touchpad

  Hello

  I'm unable to make persistent changes to the parameters of the touchpad of my laptop.  (Synaptics V.7.5 on PS/2 Port).  I have the latest version of the driver (April 2016).
  
  Description:
  Using of control panels > properties of the mouse > device settings > settings, I'm able to customize the behavior of the touchpad and apply the changes.  Step by step to the camera settings and clicking on the profile button, I am able to record the custom profile.
  
  These settings display the default whenever I do the following:

  • Restart the computer.
  • Use a mouse, connected to a USB port.
  • Select disable the pointing device internal when the external USB pointing device is attached.

  Also, when I select a different scheme of control panels > properties of the mouse > pointers, that parameter also do not support.

  Are you able to give me advice on how to maintain my settings?

  

  Hello

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Restart the laptop.

  When windows has reloaded, bring the Synaptics setting changes you need in the usual way and save them, and then check if they are now retained after a reboot, etc.

  Kind regards

  DP - K

• User profile & settings

  Not sure what on BOARD to select here. It's on my profile on the FORUM. Next to my AVATAR (upper-left) is what I guess, that's my nickname. I don't remember initially by selecting any Avatar or nickname if the username is one that I use. I just tried slecting a new Avatar, and it worked. However, under the nickname is the word "guardian". It is a complete mystery to me - where did you it comes and how do I get rid of him? While I'm at it, I have an "Avatar". I checked my settings for any instance of "Guardian" or my nickname and don't see them.

  Can anyone help?

  Hello

  Do not have an avatar to be defined.

  The designation "Guardian" below your see your username is part of the HP rating system used on the forum - see the overview on the following link.

  http://h30434.www3.HP.com/T5/community-news/HP-support-forum-ranking-overview/TD-p/6

  Best regards

  DP - K

• profile settings user lost to one of the two profiles

  I have two user profiles, the two level admin on my computer (XP PRO SP3). the other day I walked into my profile and restored all my custom settings back to default IE. my wallpaper, bookmarks in firefox etc. even started with the tour of xp when I logged in. I check other profile and who has started up as usual with all custimzations. I tried the system restore, but none of the 4 previous points worked.

  Hello booyah99

  It seems that your profile has become corrupted and Windows created this new one for you.

  Take a look for your Documents

  C:\Documents and Settings\old user name\My Documents

  And your Favorites

  \Favoritesold usernameC:\Documents and Settings\

  .

• Personal profile settings GONE!

  Last night I was using my computer, it suddenly stopped. When I tried to start it, it wouldn't start for a little while, then it starts later. When he started, it's the weirdest thing: I logged on my account (Administrator) and rather that start, the screen got a message saying "fill in your office." When it finally began, I realized none of my personal settings were there and all my documents, files, music and photos are GONE. I had to reset and reinstall everything, Itunes, Mediaplayer, Microsoft Office, Internet, everything! Since then, I tried to find a solution, and whenever I restart my laptop, everything I have reset and reinstalled is gone again! It feels like the laptop no longer any 'short memory capacity'! Laughing out loud! I've already created a new account as an administrator and checked if my previous profile is still there and it is! Only when I try to copy it to the new account, I created a message appears saying that the account is not found. None! I'm going crazy on this subject! I already spent 2 hours all that I can do and don't get any results at all. I also did a disk cleanup and restarted the laptop several times, but NOTHING. I am running Windows Vista. Please help me!

  Hi cases desperate,.

  Your old user profile seems to be corrupted. I suggest the following steps. You should be able to use any application and you need to have to reinstall.

  Step 1

  If you have important data on your old user account, you can make a backup of the data or move them to the new user account and delete the old account.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Step 2

  You try to perform a scan on your computer to check for infections.

  http://www.Microsoft.com/Security_Essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  I hope this helps.

  Bindu S -Microsoft Support

• Try to copy the corrupted user profile profile settings and I am met with the error message "too long file name!

  I tried to connect to my laptop today and instead of recording in the usual way a message that windows creates new office settings. When he finally connects me I get a message of bubble speech saying I was connected to a temporary profile, I reboot several times and the problem persists. After a little google research, I realize my old profile is probably corrupted... I have not downloaded a new software/hardware.

  I followed the steps of miscrosoft to copy the files from my old profile to a new user, everything in the file transfer went well until the last few files to copy. Then, I get this error message saying "the file names would be too long for the destination folder", only two options are cancel and skip available. Which are useful.

  I do not recognize these folders that are too long (the names are the random letters and numbers), I tried to look for them, nothing is done. And to be honest, I don't understand what that means.

  UPDATE: I decided to copy folder a bit at a time and it solved my problem, that all the files were copied successfully. However, now I was struck with a new problem. Whenever I try to access my files, I get a message that says windows cannot access the specified device, path or file. You may not be authorized appropriate. How can I fix it?

  
  

  It comes to my laptop and I administer it / have access to passwords, etc.
  

  It simply means that your old account was the owner of that file or folder.  You can change the security to access your new account.  Here are the instructions: http://windows.microsoft.com/en-PK/windows-vista/Troubleshoot-access-denied-when-opening-files-or-folders

  (It says Vista, but the steps are the same for 7).

• BlackBerry smartphone profile settings replaced with the latest changes

  Whenever I change the settings for a profile, it updates all other profiles with the same settings.  Everyone knows about this problem?

  Yep! I called Verizon, which I transferred to RIM, and they said that they are working on this topic. For now, you can make your own custom profiles and they will save and works correctly.

• AnyConnect profile settings mandatea single user

  I have an ASA 5505 running 8.2 (2) and I AnyConnect established and working until last night.  We get an error,

  "Settings profile AnyConnect mandate a single local user, but several users them are currently connected to your computer.  A VPN connection can be established. »

  Please help I don't know what that means.

  Thank you

  Ken

  This means that you have several logons on your local computer that is not allowed when you try to connect with AnyConnect. You have RDP access and local access at the same time, and if you have, AnyConnect won't be able to connect.

  Here is the documentation for your reference:

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect23/release/notes/anyconnect23rn.html#wp908545

• saved in the user profile settings

  Hello

  I use Photoshop CS6 and all SW settings, such as color settings or Panel actions, are saved in the user profile. Does anyone know if it is possible to specify another path for these settings, that would be out of the user profile? I won't go into details, but it's something that we need in our society where multiple users must have the same parameters when using a particular computer.

  Hi christianloup,

  Please see FAQ: how to migrate my presets saved a previous version of Photoshop or import/export the?

  Impossible to save preferences for Photoshop or the files required on a Server.So create presets that are common to all users and then configure Photoshop after you migrate Presets. See Presets in Photoshop CS6 Migration "Julieanne Kost's Blog .

  Kind regards

  Assani

• Cannot modify read-only profile settings and Firefox will not organize.

  can access my profile properties. Uncheck the read-only, apply and save. Read and open the properties only is checked.

  The profiles.ini file created or updated correctly to indicate the location of the profile?

  • http://KB.mozillazine.org/profiles.ini_file

  This error message you get (if any) when you try to start Firefox?

• Can not launch Firefox successfully because of the Mac application profile settings?

  The team, currently I am working for Oracle and must use Firefox to access our CRM applications.
  Whenever I run the firefox.app, I get the following error message?
  Could not initialize the safety component of the application. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no restriction of read/write and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see incorrect application behavior when you access security features.

  Am currently using OS X Lion - mountain
  Downloaded Firefox 21.

  Your comments would be very appreciated

  Give this command in a Terminal
  /Applications/Firefox.app/Contents/MacOS/Firefox-bin Pei

  Create a new profile as a test to see if your profile is the source of the problems.
  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  Profile backup and restore

  • http://KB.mozillazine.org/Profile_backup
  • https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox