Programming in LabVIEW becomes slow.
Programming in LabVIEW becomes if slow, if I try to connect one wire of its delay 5s I don't know why please give me any suggestions how to make it faster because using more than 200 controls for my project please let me know any suggestion to make it faster with this speed We can not finish the project in time.
Tags: NI Software
Similar Questions
-
Original title: 0x000000f4 beginning physical memory dump
STOP: 0x000000f4 (0 x 00000003, 0x89cb3a18, 0x89cb3b8c, 0x805d29b4) beginning physical memory dump
This is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower... What do I do? Help, please...Hello
You did changes to the computer before this problem?
Step 1: Check if the problem persists in the clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Reference:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=trueUnderstanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=trueProcedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427 -
Windows becomes slow and unresponsive more frequently.
Windows XP has become slow or not responding more frequently because I downloaded from the Garmin site. I deleted the download of Garmin, but there was another program that downloaded (something net?) at the same time that Garmin cannot name so I could remove. Frequently, I get a message that windows is increasing memory etc which has not happened before. How can I know what programs I need to run my computer and which are not necessary if I can delete them? I think that there are additional programs running that I am not opening, think computer do it himself. Please help me.
original title: XP slow or nothing answer
Hello
Many things contribute to this slowdown to a computer, it could be hardware or software related.
Method 1:
Step 1:
Computers get slower for various reasons: files become disorganized, unnecessary software consumes resources, readers of network unused slow start or too many programs run automatically at startup. Larger, serious questions can dramatically too slow down your computer's performance. You may have a virus or have need troubleshoot clean start.Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
a. refer to the article below for the procedure safe mode in Windows XP
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222Step 2:
b. you need to perform a clean boot to find the program that is causing and then disable or remove.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353/en-us
Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.Method 2.
Also, check out the steps that are listed in the articles below and check.
How to set performance options in Windows XP
http://support.Microsoft.com/kb/308417Restore the performance of your computer with Windows XP
http://www.Microsoft.com/windowsxp/using/Setup/expert/northrup_restoreperf.mspxMaintenance on a computer running Windows XP
http://support.Microsoft.com/kb/959060
See also:
Slow PC? Optimize your computer for peak performance
http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=HbvQsQcJL19
Maintenance tasks that improve performance
http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance
-
My netbook windows 8 becomes slow...
I use my netbook windows 8 for a year... and this for a few days that he began to become slow, it cannot manage the programs I've used usually... everytime I open the program 2 or more, he always says "not responding"...
the programs which usually used is microsoft word, microsoft powerpoint and google chrome...
How can I solve this problem?
Thanks in advance...
Hello
These should help:
Ways to improve the performance of your PC
http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performanceMaintenance & performance
http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V2H=win7tab1&V3H=winvistatab1Crashes Windows or freezes
http://support.Microsoft.com/kb/2681286How to speed up your PC
http://support.Microsoft.com/kb/2746761/en-us=======================================================
You use a 3rd party antivirus/antispyware/security program? If so many people
can cause slow start from the bottom.Check with the support of the system Maker (manufacturer of motherboard for customized systems), their
online resources and the drivers and ask questions in the forums about known problems.
Updating the BIOS , drivers of low level chipset and embedded and separate major
device drivers (anyone who can have an impact on the speed of startup and performance).Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
According to needs). Win + D key calls the office and using Win Key active / disable the office and
Splash screen.Check startup programs.
Right-click in the left lower corner - Manager of tasks
Or Windows key + X - Manager of tasks
Or right click on the taskbar - task managerCheck the Startup tab.
More troubleshooting:
How to perform a clean boot for a problem in Windows Vista, Windows 7,
or Windows 8
http://support.Microsoft.com/kb/929135Other programs to help:
Autoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx=======================================================
If necessary:
Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
settings) or even a restore. Be prepared to re - install the programs, applications will remain.
And having redundant backups of your files on the disk main hard is always a
good idea.Windows 8 includes special discount methods (keep files and settings) or a reset
(new installation remove all).How to restore, refresh or reset your PC
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PCHow to create a system image to refresh your PC in Windows 8
http://support.Microsoft.com/kb/2748351How to update Windows 8
http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.htmlHow to reset Windows 8
http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.htmlIf you need a repair disc:
Create a system repair disc
http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-discHow to create a "system repair disc" (CD/DVD) in Windows 8
http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.htmlHow to create a recovery USB in Windows 8
http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Lightroom CC becomes slow after several cultures
Several times a year, I regularly harvest/turn to 2000 images. Recently, more I harvest, slowly my PC is getting to the point where it has continuous CPU and hard drive activity and harvest becomes jerky and unresponsive. The only solution is to restart Lightroom, and right now, it's like lightning once again, until maybe 50 cultures then it becomes slower and slower. Does anyone have any suggestions. The only thing I can think of what changed between her looking thin and have these problems is an upgrade to Windows 10. I'd be happy to pay for a better graphics card if it can make a difference
Version of Lightroom: CC 2015.2.1 [1046594]
License: Creative Cloud
Operating system: Windows 10
Version: 10.0
Application architecture: x 64
System architecture: x 64
Number of logical CPUs: 4
Processor speed: 2.6 GHz
Built-in memory: 16339,3 MB
Real memory for Lightroom: 16339,3 MB
Real memory used by Lightroom: 970,6 MB (5.9%)
Virtual memory used by Lightroom: 957,0 MB
Memory cache size: 495,0 MB
Maximum thread count used by Camera Raw: 4
Camera Raw SIMD optimization: SSE2, AVX
System DPI setting: 96 DPI
Composition of the Bureau enabled: Yes
Exhibition: 1) 1920 x 1080, 2) 1280 x 1024
Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.Graphic processor News:
AMD Radeon HD 5570Check the supported OpenGL: past
Vendor: ATI Technologies Inc.
Version: 3.3.13399 context 15.201.1151.1008 the base profile
Renderer: AMD Radeon HD 5570
LanguageVersion: 4.40
The application folder: C:\Program Files\Adobe\Adobe Lightroom
Library path: C:\Users\Cornel\Documents\Pictures\Lightroom\Lightroom Catalog.lrcat
Settings folder: C:\Users\Cornel\AppData\Roaming\Adobe\LightroomPlugins installed:
(1) home canon Plugin
(2) Facebook
(3) Flickr
(4) attachment Plugin Leica
(5) attachment Plugin Nikon
(6) ON1 Effects 10
(7) ON1 Improve 10
(8) ON1 Photo 10
(9) ON1 Portrait 10
(10) perfect B & & W 9
(11) perfect effects 9
(12) strengthening the perfect 9
(13) perfect photo Suite 9
(14) perfect Portrait 9
(15) resize perfect 9
(16) resize perfect 9Config.LUA flags: None
Map #1: Seller: 1002
DUpdate to Lightroom CC 2015.4
A better video card will not help with this problem.
-
I'm buying a new MacBook to replace my mid-2010 MacBook Pro 2.4 GHz Intel core 2 duo, 4 GB of memory, which always runs, but becomes slow. I don't think I need retina display (if I have a lot of photos and films on the subject), but I was told that the MacBook Pro without screen retina was an old system that Apple could not support much longer. Is this true?
Barbara cfrompa says:
but I was told that the MacBook Pro without screen retina was an old system that Apple could not support much longer. Is this true?
Apple only can answer such a question, and the terms of use for these forums discourage us discuss what Apple plans to do.
I too have a MBP 2010. I installed an SSD and that increased performance. Consider that as an option.
You may experience other problems that slows down your MBP. Before commit you the important cash for a new MBP, examine the potential software problems that may be responsible for the poor performance. With the SSD, my 2010 works better than the day he came out of the box.
Ciao.
-
I recently format my computer and reinstall windows 7, since it was the only way I know of to solve the problem with Firefox (I already had this problem too). I download the latest version of firefox 33.0.2 and install it. This version was super fast. But becomes slow and unresponsive when I tried to install the Add-ons. I visited the official site of firefox and searching for addons, when I tried to install addons, Firefox crashed. Therefore, it has becomes quite slow and cannot restore previous sessions. Even to type my email address, it takes more than 5 minutes and reacts more frequently (after typing each letter).
I want to know if this is due to some viruses, or this version of firefox is not "stable".Hey there,
We are sorry to hear that Firefox crashes. To better help you, please follow the steps below to provide us with crash IDs to help us learn more about your accident.
- Enter Subject: hangs in the Firefox address bar and press ENTER. A list of submitted Crash reports will appear, similar to the one shown below.
- Copy the 5 most recent report ID begins with bp - and then back to your forum question but that stick in the box of "Post a response. (Please do not take a screenshot of your plant, just copy and paste the ID image below is just an example of what your Firefox screen should look like)
Once you have done so, you could try the Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).
If Firefox is open, you can restart Firefox Safe mode in the Help menu:
- In Firefox 29,0 and above, click on the menu button
click Help
then select restart with disabled modules.
- In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.
If Firefox is not running, you can start Firefox in Mode safe mode as follows:
- On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- On Mac: Hold the option key during the startup of Firefox.
- On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
(you may need to specify the installation path of Firefox for example/usr/lib/firefox)
When the Firefox Safe Mode window appears, select "start mode safe."
If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
I hope this helps!
Curtis Parfitt-Ford
Support for Mozilla -
Satellite A100 - Internet becomes slower after 10 minutes
Hello
the Satellite A100 worked well for a few years, the internet has become suddenly too slow after 10 minutes of the start.
The laptop switched on the first time that the internet works very well the 10 first minutes then becomes slower and slower until almost no packets are received but the connection does not completely down.Suspected spyware, rootkit, is cleaning up, and then installed from the disk recovery
Then I tried the same thing. Uninstalled the connection to the local network and then reinstalled from the Device Manager, nothing.
I figured that the Ethernet port is a failure. Then I used an adapter usb-to-Ethernet D - Link is completely independent of the integrated Ethernet hardware. Nothing, same behavior, working, first fine then Firefox displays a downtimeThe modem, cable, internet are all very well since I have tested with a PC and a laptop Fujitsu (5 years) and they all work very well. Even the D-Link works fine.
The Toshiba pc diagnostic tool specifically says "Network Fail", but it crashes exactly?An idea or a similar experience?
Hello
Hmmmmm... It sounds quite complicated.
What is with WLAN? Have you noticed the same behavior using the WIFI connection? -
Equium A100 has recently become slow - files were changed
Hello
I have a new A100 equium with windows xp edition on it (preloaded) media center. Recently, it has become slow, especially when I click on 'my computer' and my c drive, it takes forever to open the window, especially when I try and do a right click on these icons. It is so bad that the window hangs and I have to open the Task Manager to close. Someone has any idea how to resolve this issue?
Also, I get a message saying sometimes "files required for windows to run correctly have been replaced by unrecognized versions.» To maintain system stability, windows must restore the original versions of these files. Insert your now. »
CANY anyone help with this? Its scared me a bit. Where can I get these original files?
No idea why it happened oh perhaps the BONE is affected by a virus or malware
However, the operating system said that there is something wrong with the file system.So my first thought is the reinstallation of the OS from the Toshiba restore CD.
Check it out if it will work. If it is then maybe there is something wrong with the HARD drive itself -
Build the program in LabVIEW 8.6
Hello
How can I build a program in LabVIEW 8.6?
Then, you use the application builder. It comes with the edition of professional development of LabVIEW, or an add-on to the Full Development Edition or the basic edition.
You must create a project file with your VI. Search the help of LabVIEW for 'building a stand-alone Application '. Also search the forums on the subject. It is repeated several times before.
-
Hello everyone
is it possible to tell me how I can make program in labview that take black and with image pixels and give the coordinates of black or white pixels again to me.
It depends on the image and the module LabVIEW available to you. LabVIEW can open bitmap and png files and convert them into tables: if it's really a monochromatic (depth of 1 bit) you get a table 2D boolean, T for white, F for black. Just look at the index of the item to its details (don't forget that LabVIEW does not use the order of rows and columns, so you must transpose and reflect the table). If you have a 24 bit bitmap, the table will contain the color in hexadecimal synthesis (000000 for black, FFFFFF is white and so on); Yet once, you simply check if the element of the array correspond to your requirements and get its index.
With the vision that you module con open other pictures and perform advanced on them without convert them into tables. Anyway, you can just type the extension of your image using LabVIEW and see what you get.
Here is a code snippet to open a monochromatic image
-
How to collect data on the programs of LabView and VC ++ at the same time?
Hello
There are two programs in LabVIEW and another is in VC ++. The two programs to collect hardware data.
Therefore, for the experience, it is necessary to begin to collect data at the same time and lag must be
less than millisecond (it is essential for the experience). How can this be achieved? BTW, I'm new to LabView.
I think on the use of network socket to get the message for both applications.
I was wondering if there is a better way.
Thank you.
MARK002-MAB wrote:
Hello
There are two programs in LabVIEW and another is in VC ++. The two programs to collect hardware data.
Therefore, for the experience, it is necessary to begin to collect data at the same time and lag must be
less than millisecond (it is essential for the experience). How can this be achieved? BTW, I'm new to LabView.
I think on the use of network socket to get the message for both applications.
I was wondering if there is a better way.
Thank you.
You do not say if two programs access the same material, but I guess not. Because if they did, you probably get conflicts when the two programs try to access the same material at the same time.
In either case, the only really reliable way to ensure that your needs of< 1ms="" would="" be="" hardware="" triggering.="" one="" hardware="" unit="" is="" programmed="" to="" provide="" a="" hardware="" trigger,="" typically="" a="" digital="" signal="" and="" the="" other="" is="" programmed="" previous="" to="" the="" desired="" start="" point,="" to="" wait="" for="" that="" trigger="" and="" start="" automatically="" when="" it="" is="" received.="" if="" both="" hardware="" units="" are="" ni="" daq="" cards="" you="" can="" do="" that="" fairly="" easily="" using="" the="" rtsi="" bus="" or="" in="" case="" of="" pxi="" the="" pxi="" trigger="" lines.="" if="" they="" are="" different="" hardware="" then="" it="" can="" get="" more="" complicated="" to="">
-
broadcast another program through labview
Hello
I have a question
is it possible to broadcast another program through LabVIEW?
for example, I run a program in my computer, is it possible to have the remote people to look at how the program runs through the Internet and LabVIEW?
Thank you
Cynitha
Yes and no.
Yes - if you are showing them how to use a VI that you configured as a server, they can watch using remote façade. There are also (limited) ActiveX controls that allow you to use external applications in LabVIEW, IE: Word, Excel, WMP, etc.
No - if there is no involved VI, you want to just show them a random program, you can simply use Remote Desktop connection. Click Start > programs > Accessories > Remote Desktop Connection, its fairly explicit use.
-
PC becomes slow. provide the solution
Dear Microsoft,
Why the pc becomes slow. I delete a temporary file, winnt Prefetch files and hidden. but pc slow reman. Please provide a solution. What file is not important.
With respect,
Nishant Zadkar
9619554253
Uh, if you have deleted 'winnt folders hidden', you have a MUCH larger than a slow PC problem! Please specify. If you did this, then you MIGHT be lucky after the system restore.
(Also, what is your phone number? If so, you really need to change it out of your post!)Once solve you this new problem you created (in restoring the winnt folder), we can see if we can speed up your PC the RIGHT way.Edit: You started with "Dear Microsoft." Please understand that this forum is intended for the USERS of Microsoft Windows, etc. Most of us work NOT for Microsoft! -
Sites Web has become slower over ssl when we activated the stack ipv6 on the XP machine.
Slow browser in xp with ipv6 enabled via the SSL (on ipv4) while on win7 is not?
Sites Web has become slower over ssl when we activated the stack ipv6 on the XP machine.
The PC connects to internet IPv4 and ssl vpn is established on the ipv4 internet. When we uninstall ipv6 stack it becomes okay.
The real solution is to fix the DNS server that is causing these problems. http://www.sixxs.NET/FAQ/DNS/?FAQ=ipv6slowconnect
Maybe you are looking for
-
Satellite L650-1MC does not illuminate
Hello guys, once again Unfortunately, after my success with my laptop, the other day, after about half an hour, he started to be really slow again, and then later in the evening, it was pretty close to unusable. Now, it's just that. The Toshiba "spla
-
Mass USB storage does not work on the Satellite a series
When I connect any USB mass (as USB or card reader) storage, system slowly recognize it for about 5 minutes and then show a new drive letter. When I try to open it - the system is long overdue. I had restored an original condition of restore CD Set,
-
I have a new desktop computer HP with Vista Home Premium 64 - bit, with 8 GB of RAM, and when I try to run Zoo Tycoon 2, I get the following error message: You need at least 256 MB of system memory to run Zoo Tycoon 2. (0Mo detected) Y at - it a patc
-
All usb ports not working do not all of a sudden on windows xp
I have 5 usb ports, which worked very well and all of a sudden none of them work, I checked the status of them in Device Manager and all say working properly?
-
Compaq 6715 b compatible wireless adapters
Hello world I currently have a laptop Compaq 6715 b which will not boot with the error ' wireless network device 104 undetected. " System stopped. Remove device and restart. "Currently in the laptop wireless adapter is a Broadcom BCM4311. It is my un