PS/2 to usb converter problem

Similar Questions

• USB converter with serial GPS error

  I recently created a program to record GPS data from a Garmin GPS18 antenna.  The GPS uses a serial port on the docking station for my laptop for the communication and USB for power.  To deploy this application to a location in the field, I need to use a USB converter to series because the laptop itself is not a serial port.  The program works very well using the docking station and it is a serial port, however, when you try to use the converter USB to serial it mistake systematically.  The typical error is-1073807523, "VISA Read in GPS18_read.vi."  I saw an error that read something like "property (point 8) in VISA node configure Serial Port (Instr) .through - > GPS18_read.vi '.

  For troubleshooting, I used 'PuTTYtel' and checked that I can read the GPS18 via the USB Serial Converter, without problems.  Used serial settings are 19200 baud, 8 data bits, 1 stop bit, no parity and no flow control.  But when you try to play using the LabView vi, it throws errors mentioned earlier.  Any suggestion would be appreciated!

  
  

• The conclusion for M - Audio MobilePre USB driver problem

  The conclusion for M - Audio MobilePre USB driver problem

  Use: iMac

  OS: El Capitan 1011.2

  The latest driver I could find was 1.8.1.

  Error message:

  Installation failed - Setup could not install the software because there was no

  available software

  I would use this hardware with Final Cut ProX 10.2.2 and Garageband 10.1.0.1

  A quick search seems to indicate the latest version of the driver to be 1.2.1 - there was no 1.8.1 I could find. It has been out for more than a year, so no mention of El Capitan, but it could work. I'll make sure that you have the right to download and try again.

• SPI USB converter

  HiI am trying to use USC-216 SPI isolated with Labview.But USB Converter can't communicate with the unit is someone familiar with this converter? Best regardsGuy

  I may be difficult to find someone who has direct experience with this particular device. What type of programming interface is bundled with it? You have a DLL? The manufacturer provides the source code of any example (probably C)?

• How to set up a USB converter to series on a virtual XP machine

  Envy 17 3D: i7 2090nr: model LV045UA #ABA, Windows 7 Professional

  I am installing a converter USB to COM on a virtual PC XP series. Neither Belkin nor IOGEAR USB to Serial converters are able to accomplish this because they cannot work within a virtual machine, according to their support personnel and I checked it's true.

  Is it possible to install a USB converter to series on a virtual XP machine?

  Kind regards

  LMNUCOHEN

  It turns out that, integration features have been installed, when I created the virtual machine. In addition to starting the virtual machine, it enables the integration features.

  Based on previous comments by the previous speaker, what I'm trying to cannot be done.

  Thank you for responding.

  Kind regards

  LMNUCOHEN

• VMware vCenter Converter problem

  I have a VMware vCenter Converter problem! I downloaded it and it now resides in the "Finder" as an .exe file, but it's all text! When I open it, the caption at the top says it cannot be run in DOS mode. All the 30.1 MB there is then now that do I do?  I don't know that I jumped through the hoops required to access the program for download on my Mac VM.

  BTW, VMware Converter has its own Forum.

  I would like to start by reading the documentation for the product you are trying to use.

  VMware Converter 3.0.3 (PDF) user manual

  Note: You must install in Windows not OS X.

• SD5010 DVD Player USB Toshiba problem

  Hello

  I recently bought this DVD player, when I play a movie through my USB always, it stops before the end of the film and cuts back to the main menu. Does anyone know why this might be happening? I tried resetting the DVD player and that didn't work. I deleted a few movies on the stick, and that did not work.

  What is the USB itself? It's a 16 GB.
  Thank you

  Theoretically, it could be a problem of USB if strongly recommend to test this using an another sticks too.

• Portege Z30-A-12N with Port Replicator Port Hi-Speed USB III problems

  Hi all

  I have a big problem with my new Portege Z30-A-12N and Hi-Speed Port Replicator III.

  I connected the power, DVI, LAN, mouse and keyboard to the Port Replicator.
  Power, DVI and LAN are okay, but none will be found if I connect something to the USB Ports 2.0 or 3.0.
  No mouse, no keyboard, and no USB key.

  When I start my Portege I must enter a password after you press the power button.
  These password, I could enter with the external keyboard, but in windows, no keyboard has been found.

  If I connect the keyboard and mouse to the USB Ports of the Portege instead of Port Replicator, the two has been found.

  I ran Windows 7 Enterprise on the Portege.
  BIOS version is 3.30

  Do you have a solution for me?

  Hello

  The HI-SPEED PORT REPLICATOR III PA5116E-1PRP supports 2 x USB 2.0 and 4 x USB 3.0 ports.
  You n t special need Win 7 drivers in order to be able to use the USB ports or other interfaces such as VGA, DVI, audio, etc.

  Sound problems, make sure that the audio device has been selected in the right panel-> sound-> playback tab

  By the way: Win 7 needs USB driver 3.0 which is preinstalled when the laptop was equipped with USB 3.0 ports. My knowledge if your mobile phone does not support USB 3.0, you will be able to use the port replicator USB 3.0 ports.

  Finally and above all devices must be connected before you start the computer. The decision supported and compatible specifications: Portégé R30 - A, Tecra Z40 - A, Tecra Z50 - A, Portégé Z30-A/Z30t-A, Tecra A50 - has

• Optical USB mouse problem with Portege R100 on windows XP

  We have three laptops Toshiba Portege R100 currently giving problems with mouse optical usb from Toshiba.

  When starting the laptop, that the mouse is not recognized by windows. Before and after will be identified in the mouse will not respond while Burns led.

  The mouse will be recognized after re - plug in the USB port.

  We have updated versions of bios to the latest version. (1.4)

  Another mouse (USB optical) works OK without problem.

  We have removed the drivers and reinstalled by windows plug-and-play process, but it does not work.

  Is this a known issue?

  Thanks in advance

  Hello
  would it be possible that the USB mouse has high power consumption?

  As far as I know, there are a load of maximum intensity for each USB Port.

  Do you know how much power (intensity) needs to this mouse?

  Good bye

• HP envy 20-d000: Usb security problem

  Guys, I have a problem with my bios here... I accidentally disable my usb security and then what happens is that I can not connect any usb even my keyboard drive... Need help is anyway to solve this problem... TQ

  Hi there @Prathash,

  That the Forums are with you!  I understand that you locked all USB connections in the BIOS and can is no longer even use your keyboard to restore.  I'm happy to give you a helping hand with this.

  In your current situation, you have only a few options, first to clear your BIOS default settings. To do this, you will need to use a jumper on the motherboard to reset the BIOS.  You can see the following for when the jumper is located on the motherboard for this system. HP and Compaq Desktop PCs - motherboard, Larrybird-B specificationsand Maintenance and Troubleshooting Guide, to get an idea of how to get to parts of your motherboard.  If you can't go to these riders, then your other option would be to contact an authorized service provider or HP directly to do this for you.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Toshiba 48L1433DB - USB timeout problems

  My USB Ports do not appear on my list of Source and I have a problem of "dead time".

  If I put a stick in the media page loading USB ports and everything works perfectly, but then turns off after an hour or two (the on-screen message shows empty port lit).

  Then I have to unplug the stick and reload until I can start watching again (have to fast forward to place where disconnect happened but have to stop every now and then to avoid time re-product)

  Very curious

  Posted by [email protected]
  

  My USB Ports do not appear on my list of Source and I have a problem of "dead time".

  If I put a stick in the media page loading USB ports and everything works perfectly, but then turns off after an hour or two (the on-screen message shows empty port lit).

  Then I have to unplug the stick and reload until I can start watching again (have to fast forward to place where disconnect happened but have to stop every now and then to avoid time re-product)

  Very curious

  As a first step, you must make sure, that it is not caused by the type format and/or stick file.
  Have you checked with a stick from another provider? Also, does come with any type of file, or related to some formats?

• Satellite C660D - 10 p - USB connect problem Windows 7 64 bit

  Hello!

  USB drive is no longer recognized shortly after the start.

  According to 'Unsubscribe' or 'Edit user' still OK, but even for a short period.

  Have no USB Updat to Toshiba, a controller failure will probably be.

  Can anyone help?

  Harald greetings

  Hi Harald

  Can you please tell us what model of laptop do you have?
  Are you using the original version of OS that you got with your laptop?

  Maybe I didn't understand the description of your problem, but I imagine that the USB ports do not work on your laptop satellite? Right? have you tested with different USB devices?
  When you open Device Manager you will see some unknown devices here or some hardware issues?

• Equium A60: USB Hub problems

  I have an Equium A60 and that you just bought a USB 2.0 with 4 ports hub, but it is not recognized when plugged into one of the usb ports
  It causes also the PC hang on shutdown and startup
  Hass someone at - it had similar problems

  Hello

  As far as I know for some USB hubs, it is necessary to install a software that can help to use correctly. Some of them are plug and play devices and there is no need to install any additional software.

  I use Satellite 1900 and also have USB hub and it works correctly. In my case, it was necessary to install the driver before the hub is connected. A demon of the mine has Belkin hub and in his case, the driver has been installed after that the laptop has recognized a new hardware component.

  All this is based on the producer of hub. I hope you have some instructions how to connect the hub to the laptop on the right feel.

• LPT USB converter

  I have a Toshiba satellite A100-233 notebook
  I want to connect to it an EEPROM, EPROM and a microcontroller ELNEC-SMARTPROG programmer
  So I buy a converter USB to parallel cable, when I connect it, the windows XP recognizes the device automatically as "USB printing support".
  But what I need is a virtual parallel port LPT (such as a serial port virtual who's worked for me), since the programmer setting allow me to choose the parallel LPT port.

  I live in Jordan.
  but when I send mail from (i.e. [email protected]) UNITED Arab Emirates support, I received a delivery of my e-mail account page

  Thanks for the help

  Hello

  A friend of mine sometimes do some experiments and he told me that you MUST use a parallel cable and not some converters.

  He also said that the possibility of using the PCMCIA card is a good idea but he don t know if it will be 100% working.

• USB keys - problem with the Recovery Manager

  I bought a 16GB Kingston DataTraveler 112 USB key so I could copy the recovery as a backup image. He acknowledged the USB key and showed that the recovery image has been slightly more than 11 GB. But when he started to format the USB key, it returns to the previous screen and asking more of the car. At the bottom of the screen, he said to contact the HP Support, but it gives me an error message. Now when I try the Recovery Manager it does not recognize the USB at all.

  Before that, I had bought another 16 GB USB - don't remember what brand. I have 5 other USB drives, but they are all small, except a 32 GB Kingston DT101 G2 which does not work on this computer, even if it worked on my old computer (Pavilion w/Vista Home Premium) without problem. All these USBs, including the new Kingston are for USB 2.0.

  Operating system is Windows 8.1 64-bit on the desktop HP Pavilion 500 - A60. I tried the problem that USB keys in all 4 ports (2.0 and 3.0). Also in that I plug into a port to give me 3 USB ports, also used on my previous computer.

  Is it possible that this computer does not recognize Kingston or some other brands of USB thumb drives?

  The trick to this is to use a USB 2.0 port and use a non-windows 8 certified thumbdrive. If the USB flash drive shows as a 'removable device' there should be no problem in the use of the media to create a recovery media

  I had a lot of success with a 16 GB Transcend USB 3.0 flash drive.

  I own a couple of DataTraveler flash drives and had the same lack of success, creation of recovery media that you did. I have had zero success with 3.0 of Sandisk Extreme usb flash drives