USB converter with serial GPS error

Similar Questions

• USB to serial problem (error - 1073807342)

  Hello

  I have a question regarding the use of third party cable converter usb to serial. I'm trying to interface with a GPS using this cable. Using the VI, I have no trouble communicating with Labview on my laptop, but when I transfer the VI on my work computer. He gives me an error.

  -1073807342 error to the node property base series (arg1) write and Read.vi

  Possible reasons:

  VISA: Invalid resource Reference (Hex 0xBFFF0012) specified. Parse error

  I use the same version of Labview on both computers, Labview 8.5 and the only difference between the two machines is that my laptop using Windows Vista and my work computer Windows XP. I installed the driver for the cable in both machines. I tried to communicate with him using HyperTerminal and that works. The VI contains that a modified version of the GPS VI from labview and serial basic read and write of VI.

  I tried to use MAX to see if something happens. But the device status says:

  MAX could not log on VISA to this static device. The device has not been returned to VISA when searching for resources, but MAX has been able to use VISA to analyze the resource name.

  Any ideas?

  Thank you

  Mandy

  Hey Mandy,

  Looks like you have not NI-VISA on the work computer. Try installing with the Manager of cable and you should be good to go. You can get the latest version of NI-VISA here.

  Good luck

  Lab

• I can't convert Excel - it continues to flow upward with an unexpected error!

  I am trying to convert an invoice in Excel, but it continues to flow upward with an unexpected error. Help, please!

  Clear salvation,

  It is a forum of numbers. You can have better luck on an Excel forum.

  Quinn

• I tried to install 300 photos on a USB I installed 170 photos and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  I tried to install 300 photos on a USB I installed 170 photos and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  Hi BrendaMay,

  Take a look at this link http://social.technet.microsoft.com/Forums/en/itprovistasetup/thread/bf17ed76-5164-4380-9140-16bd74e7c8c7 and check if the post by Ira Horowitz to Monday, December 24, 2007 15:04 is a good one to try.

  Kind regards

  SAP

• I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  Hello BrendaMay,

  ·         What exactly do you mean by saying that you install photos?

  ·         You try to copy photos from your computer to the USB key?

  Try to format the hard disk to the NTFS Format USB and check if you can copy the photos.

  If does not work, try to format to FAT32.
  1. type devicemgmt.msc in the Vista Start menu or in the Run dialog box.

  2 expand disk drives, right-click on your USB key that you want to format it in NTFS file system, and then select Properties.

  3. on the Policy tab, select optimize for performance option. Click OK and return to my computer.

  4. right click on your key USB. Select Format.

  5. Select NTFS from the drop-down list (you can also select FAT32).

  6. click on apply to format your drive to NTFS.

  Note: The pilot of formatting will destroy all data on the disk.

  If this does not work, try to create a new folder in the drive, and then copy the photos on this folder.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• connect to HP Lazerjet 4 L on USB port with cable converter

  Bought a 25 pin Cable for HP Lazerjet 4 L USB converter, downloaded the driver with hdwwiz, but still does not have the printer to work.  Any suggestions?

  Hello

  This looks like a bit of a sticky situation. The first thing you need to ensure that is to have the right drivers for the converter installed. You should check this with the manufacturer House of the converter.

  Then, you need to make sure that this converter will actually work with the printer. Once again, something that you should consult the manufacturer all.

  Finally, you will need to download and install the drivers for this printer. This could be difficult, because since it seems that the printer is old enough, he might not be available for Windows 7 drivers. In this case, you may need to install in compatibility mode.

  Take a look at this link for more information on how to do it.

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/80cae5ee-dc98-4A2F-8284-a1ab826059b7/

• Get incremental counter/sound to work along side with action with usb-6008 with labview tia sal22

  Get incremental counter/sound to work along the coast with usb-6008 with labview tia sal22

  Hi all

  I can get this vi to work if they are distinct from the vi but I can't join them together

  Example of my error:

  If buffers are set to 0 the freq counter increment works, but no sound
  If the buffers are set to 1 the audio works fine but is not increment the Freq counter
  If the buffers are attached to more 1 clicks and pops are coming

  That's what I'm doing:
  (1) have the frequency of increment of my internal sound card to a certain level as .01hz a second until he gets to 20 000 hz

  (2) use my device usb-6008 daq, which is connected to the same machine to measure the voltage at the same time. (I am in a position very low voltages between 1-5volts)

  (3) output to a worksheet text file which will show you:

  time in seconds, frequency, voltage
  0,400.01,2

  1,400.02,2.5

  2,400.03,1

  I'm a bit confused about how connect the increment and the audio during the measurements with the usb-6008 housing on the same machine
  at the same time and in the same VI.

  Anyone have any ideas?  I'm using labview 8.5
  TIA sal22

  Ha ha you have been deceived by a dynamic thread. Insert a convert from Dynamic Data Express VI (Palette to own: Signal handling screw Express) between the daq read and build the array function. Then it won't work. Now the value in the dynamic data is only converted to a numeric value

• That - 1073807252 serial port error code means?

  Hello

  I have a client with a prototype device that uses a USB OR for RS-422 interface connected to a PC.  On the LabVIEW, the following error code application of the serial port is seen:-1073807252

  What does this code mean?  Is there a place where serial port error codes are discussed?

  Thank you.

  Bob

  Right-click on the cluster of error, and then select 'explain the error.

  

  Alternatively, use the Simple (or general) error handler.

  He tells you: VISA: (Hex 0xBFFF006C) an overrun error occurred during the transfer. A character not read in the material before the arrival of the next character.

  Basically, this means that you do not read the serial port stuff pretty quickly.

• Agilent 82357 B GPIB/USB, problem with distributed applications

  Hello everyone,

  I am developing software that communicates with an instrument, with USB, RS232, Ethernet and GPIB interface

  On my development PC, I can communicate with my instrument using a 82357 B Agilent GPIB - USB converter, without any problem. (and other interfaces as weel)

  I have deployed the application using the Installer application on the target computer Builder. The application works with USB, RS232 and Ethernet interfaces, but I don't see the GPIB interface in the control of VISA resource name.

  I followed the advice given by OR when you use a converter USB GPIB of Agilent (Tulip active...)

  I did the following tests on the target computer:

  -J' installed MAX, and I can communicate with the VISA test panel using the GPIB-USB converter.

  -J' made a small application with the VISA resource find included

  -If I unplugged the converter USB/GPIB instrument, the VISA to find the function return resource: GPIB0::INTFC, COM3, COM4, LPT1 COM7

  -If I plug the converter to the instrument, the function of resource VISA finds return nothing.

  -If I run the interactive command of VISA, I got the following error:

  Cannot find the resource by using expression? " »

  error: BFFF003A

  Name of the State VI_ERROR_INV_SETUP

  I'm using LabView 8.5 under windows XP.

  I have included in the installer

  -Run LabView 8.5

  -VISA 4.4 duration

  The target computer is running Vista.

  Thanks for your help and your support.

  Hello everyone,

  For your information, I have solved the problem in desinstalling then reinstalling my installation software on the target computer.

  I still don't know where the problem was, but it's working now. (even with the version of the driver 15.0 agilent)

  Thanks anyway for your help.

• IBM travelstar external USB compatibility with Portege 3480CT

  Hello
  I try to use an IBM & reg travelstar in a box external usb with my Portege 3480CT running Windows 2000 (with sp4). While the disc is recognized as plug-and-play on other computers running win2k and winXP, is not recognized on my Portege, which gives an error message suggests that the drivers are missing.

  According to IBM/hitachi (which make the player), no drivers are needed and the drive should work as plug-and-play, recognized as a generic USB HDD. This happens all other computers I've tried.

  Are their compatibility problems with this drive? Or are their special all the drivers necessary to recognize this configuration on the Portege?
  Thank you
  B

  Hello

  AFAIK there is no driver required for external hard drives and they are recognized as plug-and-play. Your Portege is an old unit and there may be a problem with the USB ports. Have you checked the other USB devices?

  It is also possible that there is not enough power, and in this case, it is recommended to connect the drive using USB hub with own power supply.

  Good bye

• How to use a USB mouse with 8 Thinkpad?

  Hello!

  I would like to know how to use a USB mouse with 8 Thinkpad. Here in the Brazil, Lenovo does not sell any micro USB USB converters. So, I found on the market several options, but mainly focused for Android tablets and smartphones and not Windows 8.1 devices. He will work with a converter OTG? It supports this type of technology?

  Thank you!!

  You can use any cable USB OTG, it's just the cable and two connectors. I use this Setup with USB keyboard. But it is more convenient to use a Bluetooth wireless mouse.

• How can I get the USB-Quad08 with Dasylab encoder channel data

  Hello

  I'm reading the pulse signal of USB-Quad08 with Dasylab V10, but every time I got the error message "this Committee has no meter 9513.

  I have configured the jury with Instacal and the test hardware is ok. I used the module 'Entry meter' (Modules--> inputs / outputs--> MCC - DAQ--> Counter Input) to read the signal of the channel meter. "Entry 9513 counter" displayed and I na not change settings. After connecting a graphic recorder module I run the application. The error message appeared.

  I noticed that USB-Quad08 Council has counter 9513. But why the error occurs?  How can I get his channel encoder signal?

  PS. I can get with Dasylab DIO signals, but I can't any signal with TracerDAQ, even I can't find USB-Quad08 in his list of DAQ devices.

  Please contact Measurement Computing.

• HP 2510 "Unable to communicate with the printer" error.

  Greetings,

  I recently bought a Deskjet all-in-one of HP 2510. I'm running on Windows 7 Home Premium 64-bit.

  When I try to print documents, the printer comes with the following error:

  http://i.imgur.com/uwK8MNq.PNG

  Try to use the print and scan tool doctor, I find a conflict report of driver:

  http://i.imgur.com/B9NCkTQ.PNG

  Thus, after following the instructions, I uninstalled and reinstalled as indicated (in taking very special care to make exactly as shown in the installation instructions). Errors still occur.

  I tried to delete the printer from the Device Manager, uninstalled the drivers of the various related devices out there, uninstalled the full software features using Add/Remove...then tried reinstalling again. I even tried to foregoing the installations CD and website (Yes, I tried both) and let Windows automatically installs the drivers. Always the same two errors original.

  It sucked to the top of my Sunday together. Someone saw?

  I managed to go today to get the USB power cord and it has indeed solved my problems. It seems that the USB cord that works with older models is not compatible with this printer, so that's been my problem.

  Fortunately, the new cord works perfectly and I was able to print two pages of perfect test.

  I apologize for my frustrated shattered earlier and thank you for your help.

• SPI USB converter

  HiI am trying to use USC-216 SPI isolated with Labview.But USB Converter can't communicate with the unit is someone familiar with this converter? Best regardsGuy

  I may be difficult to find someone who has direct experience with this particular device. What type of programming interface is bundled with it? You have a DLL? The manufacturer provides the source code of any example (probably C)?

• PS/2 to usb converter problem

  I bought this old keyboard, but it was a good keyboard, so I really want to use it.

  It is a ps/2 keyboard, we use no more. So I bought this ps/2 to usb converter.
  The problem was that the num, caps, stop scroll blinked when I plugged in the keyboard, but the keyboard just doesn't work.
  Help, please.

  Hi simonpark,

  Check if the keyboard works in safe mode and after return with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Also I suggest that you connect the keyboard using ps/2 to usb converter to any another computer and check if it works.