Pulser for usb-6218 with exponentially increase

Similar Questions

• Update firmware for USB-6501 with 3.4.0 driver?

  Hello

  I am wanting to use the 3.4.0 NI DAQ driver with a USB-6501 and finds that the firmware is incompatible with the driver. The most recent driver that I used was the basic driver 2.1, unfortunately, the software that I use to send signals to the USB-6501 requires libraries to the 3.4.0 pilot.

  Y at - it a firmware available that is compatible with the 3.4.0 driver DAQ for USB-6501 device?

  I see that, after you have improved your DAQmx Base 2.1 to 3.4.0 drivers he said that the firmware on the USB-6501 is incompatible.

  If you go through this knowledge base, it will show you exactly how to get the firmware compatible with DAQmx Base 3.4.0. In particular, near the bottom, it shows how to perform this update.

• Problems with USB-6218 in DAQmx connection diagram

  I use MAX to implement the tasks of measurement thermocouple for part of our engine Diesel DAQ. It's a simple enough part of DAQ - read in the thermocouple temperature measurement and then draw. The problem that I am running is with the wiring diagram. Looking at the USB-6218 casing, it is labeled for the analog inputs, but when I go back the stitching in the measurement and Automation Explorer (photo attached), it shows that the pins are marked differently.

  For example, that I choose to have a thermocouple (two sons) in analog input 0 (ai0). The diagram shows that I should connect the two wires of thermocouple to channels 15 and 16 which are AI0 and AI8, respectively in the pinout diagram. Then say I assign another thermocouple with 8 analog inputs (ai8), he tells me to write the two wires of thermocouple to 16 and 28 channels which are AI8 and AI GND, respectively on the pinout diagram. This is great except for the fact that both ai0 and ai8 use the same channels on the DAQ card.

  I get the same thing when I select ai1-> CH 17 (I 1) and 18 (AI 9) CH then ai9-> CH 18 (AI 9) and 28 CH (AI GND). Channel 18 (9 analog input) is used for both thermocouples.

  No idea as to why LabVIEW is bunk of the analog inputs?

  No, you cannot change the pairings and as shown in the picture, ai0 and ai8 are right next to each other. Can't be more close to everything.

• I want to USB Hub with sync Ipad pro please suggest compitable for this device

  I want to buy power USB Hub with Sync to IPad Pro please suggest me the device appropriate for this work

  A powered hub will do, choose one.

• USB-6218 for PC transfer speed

  Hi guys,.

  I hope to be able to taste 10 channels 10 Hz for about 1 hour, in Labview 8, on a relatively new core dual desktop PC.

  First, I tried an Agilent34970a and concluded that, even if she can continuously scan quickly enough, GPIB in Labview transfer speed was too slow and the PC could not follow.

  So I intend to implement a continuous sweep on a USB-6218 and then read it via USB, time-stamped data in Labview.

  After reading about OR "sample streaming usb", my question is: approximately how long will be the transfer of data via USB? I'll be able to transfer time-stamped 10 channels at 10 Hz continuously in Labview, and still have cycles left processor above for other duties such as writing to the file .VI and update the screen.

  The reason for which I am aiming for USB and no PCI/PXI is because I am concerned about the interference of the computer that affect my signals.  I read only analog voltages in the range of +-10V.

  Thank you for your understanding.

  You can acquire and store at rates of several orders of magnitude higher than 10 Hz. A good way to make sure you can follow has a producer/consumer architecture so that the file writes are made in a separate loop. Backup to the binary is also much faster than backing up to the text. Thus, the design of the program is important as well as the material you use.

• Need software for USB driver for JVC digital camcorder model GR-No.-D870AS with window xp

  Need software for USB driver for JVC digital camcorder model GR-No.-D870AS with window xp

  Hello

  I suggest to see the link and install the drivers and check.

  http://www3.jvckenwood.com/English/download/index.html

  I also suggest you contact the manufacture of the product and check.

  http://www3.jvckenwood.com/English/support/index.html

• Where can I buy a usb key with thin cable for A500 for cell phone charger?

  Where can I buy a usb key with thin cable for A500 for cell phone charger? Or I can do?  Thanks for any help.

  The A500 uses 12VDC to load. USB use 5VDC. You could do a cable, but it wouldn't work because of differences in voltage. Sorry...

• Video device USB has a driver problem__ __There is a problem with the driver for USB video Device.__Device information __Name: __ID USB video device: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 code __Error: 10 _ _ _

  I hava a dell inspiron 1440 with windows 7 and a a few days ago, my webcam was working just fine but know that it gives me this after troubleshooting

  Has a USB video device driver problem

  Not fixed

  There is a problem with the driver for USB video device. The driver must be reinstalled.

  The device information

  Name: USB video device ID: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 Error code: 10

  Hey laloo.16,

  As the error message states clearly that reinstalling the driver is required, please do the same. You can uninstall the driver that is currently installed from the Device Manager.
  To access Device Manager:
  1. go to start and type Device Manager.
  2. Select Device Manager in the control panel list.
  3. go to your device.
  4. to remove:
  Right-click on it and select Properties.
  5. Select the driver tab and click on uninstall to uninstall the existing driver.
  6. close Device Manager.
  Now go to the link below. Download the Dell WebCam software for your product.

  http://support.Dell.com/support/downloads/DriversList.aspx?OS=W732&CATID=-1&DateID=-1&impid=-1&OSL=en&typeid=-1&FormatID=-1&SERVICETAG=&SystemID=INSPIRON1440&hidos=WLH&hidlang=en&TabIndex =

  Please choose the appropriate version of Windows 7.  Install the driver and see if that brings your webcam to work.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The port Thunderbolt can we adapt for USB3 ports. I have a laptop Macbook Pro with processor 2.2 Ghz, HDD 256 GB, 16 GB of memory, operating system El Capitan. I want to add up to three additional 3 USB ports with an adapter. Is there an excellen

  I have a laptop Macbook Pro with processor 2.2 Ghz, HDD 256 GB, 16 GB of memory, operating system El Capitan. I want to add up to three additional 3 USB ports with an adapter. Here are all excellent adapters available on the market to achieve this goal? If so, what are they, and they are available to plug in the USB ports and / or Thunberbolt on my laptop?

  I purcahsed an adapter but it only matches a port of type C, which is not on my new laptop.

  Thanks,-John D.

  What month / year is your Macbook Pro?

  Also is what size?

  i.e. of Macbook Pro (13 "Early 2011)

  If you need a crush on USB3, see this OWC. http://eShop.MacSales.com/shop/Thunderbolt/dock/OWC/Thunderbolt2-dock/?_ga=1.216 256982.1355932382.1452374654

  If your existing computer has USB3 ports, you could get a USB3 hub.

  Kim

• Satellite L750 - Support for USB 3.0

  Does anyone know how to determine if my new Toshiba Satellite L750-03C044 takes care of the increased speed of USB 3.0?

  It has three USB Sockets - two on the right of the case and the left itself. All three taken are black, not blue that I could possibly expect for USB 3.0 support.

  The three of us taken are marked with the trident USB logo. The one on the left is also equipped with a bolt of lighting journal.

  Can someone please advise. Thank you very much.

  Hello

  I ve checked specification and it is written that your laptop is 3 x Hi-Speed USB 2.0 ports, so I fear there is no support for USB 3.0 m.

• Problems when I want to update my complete system Mavericks using a USB key with the installation program.

  I want to "Refresh" my Mavericks home cleaning system and I still have a USB key with the complete installation program.

  With this USB key, I installed successfully already before Mavericks. Now, I want to repeat the installation by booting from USB key. But when the installation starts early an alert appears, said something like "... the verification failed - something is changed on the volume...". "and the cant of the installation continues.

  I've archived the original "OS X Mavericks installieren.app" from the app store and I have properly prepared another USB key using the terminal app, referencing the original installer, but I still get this alert when I try to install with this new USB.

  It is necessary for me to work with the Mavericks, because it's the latest version of the system on which I can run Adobe Creative Suite CS6 correctly. With the later versions of OS X, I get problems on my Mac Pro (end of 2008).

  I wonder what could happen with my first USB data, as I have already installed Mavericks successfully with it under the same conditions and after that he never touched the stick again so far. What can I do? What is the reason for this? Y at - there a site where I can get help or advice to solve the problem or if necessary can I re-download an Installer 'fresh '?

  Thank you and what is Berlin

  You can make a bootable USB to install using this free program that will do all the work for you. Try running disk utility/repair disk be before installation.

  Bootable USB Flash Drive-Diskmaker X

• Satellite T135D-S1324 - no support for USB boot

  Hello.

  I buy this model (TOSHIBA SATELLITE T135D-S1324), I am a linux user, this model comes with ligthscribe player, I want install ubuntu on USB but to my surprise I discovered that there is no option for USB boot in the BIOS config.

  Anyone know of a solution for this problem?

  There's a kind of an UPDATE of the BIOS to activate the USB BOOT?

  Thank you.

  Post edited by: idposada

  Hello

  Usb drive before plug to turn your laptop and the Bios must recognize.

• IBM travelstar external USB compatibility with Portege 3480CT

  Hello
  I try to use an IBM & reg travelstar in a box external usb with my Portege 3480CT running Windows 2000 (with sp4). While the disc is recognized as plug-and-play on other computers running win2k and winXP, is not recognized on my Portege, which gives an error message suggests that the drivers are missing.

  According to IBM/hitachi (which make the player), no drivers are needed and the drive should work as plug-and-play, recognized as a generic USB HDD. This happens all other computers I've tried.

  Are their compatibility problems with this drive? Or are their special all the drivers necessary to recognize this configuration on the Portege?
  Thank you
  B

  Hello

  AFAIK there is no driver required for external hard drives and they are recognized as plug-and-play. Your Portege is an old unit and there may be a problem with the USB ports. Have you checked the other USB devices?

  It is also possible that there is not enough power, and in this case, it is recommended to connect the drive using USB hub with own power supply.

  Good bye

• How to use a USB mouse with 8 Thinkpad?

  Hello!

  I would like to know how to use a USB mouse with 8 Thinkpad. Here in the Brazil, Lenovo does not sell any micro USB USB converters. So, I found on the market several options, but mainly focused for Android tablets and smartphones and not Windows 8.1 devices. He will work with a converter OTG? It supports this type of technology?

  Thank you!!

  You can use any cable USB OTG, it's just the cable and two connectors. I use this Setup with USB keyboard. But it is more convenient to use a Bluetooth wireless mouse.

• How to use a USB microphone with voice dictation on MacBook Air?  Machine recognizes the USB device, but the microphone does not work.

  How to turn on a microphone USB bluetooth with voice dictation (Dragon for MAC) on the MacBook Air?  Machine recognizes the USB device, but the microphone does not work.   I don't see no response.   I use OS X 10.10.

  Version OS X?