Q drive manifested itself the day I connected Internet.

Similar Questions

• USB MTP driver fail when the computer is connected to the domain

  Hello

  Please help me solve this problem now, I had an old thread who died http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer=http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer= http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer=http: //social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/

  Please note that the cause of the problem is already, I don't want no information on reg-patches and such.

  After connect us any computer to our area, the PnP for cameras (eg. iPhone) does not work.

  Tested on several models with the same result, always work before the computer is connected to the domain.

  I can't find any setting in our group strategy which must affect installation.

  You can find the log files from the same computer, created during the installation of the MTP (with an iPhone)

  https://anonfiles.com/file/9bf2a47c44cdb2f589d544924c6ffd2b

  MTP_domain.log has been created on a clean Windows 7 64 bits connected to our domain

  MTP_no.domain.log was created on a Windows 7 64-bit clean

  Hello
   
  Unfortunately, the question you posted would be better suited in the TechNet Forums. I would recommend posting your request again in the TechNet Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
   

• Need help with the error of connection Internet "Reset local connection adapter".

  Original title: Need help with Internet connection.

  Hi, sometimes when I go to my office (HP 2009 m) I get a message that I am not connected to the internet (although I have no problem with the connection on my IPad).  When I click on solve internet connection Windows Network Diagnostics freezes when it gets to solve problems "the local connection adapter reset."   I have to turn off my computer by unplugging and then it works normally when she returns to the top. (Sorry if my explanation is difficult to decipher, I'm not very tech savvy) This could be the cause and how to fix it?  Thanks in advance.

  Well, I expected more of a response, but I'll wing it from here: your cable goes into a modem.  This modem can be a wireless modem/router, or simply a modem cable to your computer.

  Connection problem you might start by connecting the cable into the modem.  Ensure that it is well defined.  If everything looks good, then it is possible that there is a decline in cable service before he gets to the modem.  For example, the interface side of the House can be affected by a bad connection, for example water intrusion, or poor soil.  So you may want to check into that.  Then, there is always the possibility that your cable provider has lost his momentaily of transmission, and that the modem needs to be reset.  If this happens often, you must contact the cable provider.

  Modem, your computer can be connected by cable, so you will need to check how firmly the connection is.  Then, there is always the possibility that the modem is wrong.

  But if your connection is through a wireless modem/router, your connection may have lost because of a bad signal.  Once more..., the modem/router could go wrong.

  Edit has added:

  Looking back on what you said about the Ipad, I feel that you have a wireless modem/router.  It is possible that your connection to the desktop must be after you have used the Ipad.  For example, you may need to right-click on the monitor icon in the Systray to your desktop and open your network sharing Center.  Even if you can say that you are connected to the Internet, you may not.  Then... just ... simplement cliquer click on 'connect or disconnect', then find your network connection appropriate, right click on that and select disconnect, then immediately right-click the same but select Connect.

  
  

  Will be a new connection to the Internet.

• my mac is the display of the comment... No backups for 13 days.  Connect to a power outlet while your backup disk is available.

  My Mac is the display of the comment... No backups for 13 days.  Connect to a power outlet while your backup disk is available.  For my time Machine control, everything seems to be saved.

  Time Machine also creates temporary copies on your internal drive when the backup drive is not available. So you can see the 'temporary' backups on your internal drive.

  I recommend that you connect your external drive and your power adapter and let make a permanent copy - ones on your internal drive are subject to deletion if space is short.

  By now he may need to do a 'deep traversal' which can take some time.

• Tecra M5: How to use the HARD drive password when the HARD drive is connected as an external device?

  I have a Toshiba Tecra M5 with MK1032GSX hard disk. I put a bios password and HARD drive password. Every day I turn on my laptop with my password a number only once: unlock the disk and bios. The password screen is before windows starts.

  One day my laptop motherboard is broken, I bring my pc on the Toshiba support center (less disc) and I'm waiting for him (2 months ago). I need to read my date of the disc, but it is locked by password. The drive is a SATA drive, I put it on a desktop computer and I see it in the bios and in windows resource device, but I do not see in the Explorer.

  None of the software I've tried (HDD unlock, atapwd...) will not work. I have my password, I have not forgotten.

  How to read my date? Can you help me?
  Thank you.

  Hi Oscar

  Hmmm I m not 100% sure, but I think that it s not possible to remove the HARD drive HARD drive password if you haven t your laptop.
  I know that if the HARD drive password has been set the HARD drive is not more accessible and more usable.

• HP Pavilion dv6-6140tx: HP Pavilion dv6-6140tx cable hard drive (the one that connects HD on motherboard)

  Dear members,

  Asking for your help to find the cable from hard drive HP Pavilion dv6-6140tx (the one that connects the hard drive to the motherboard).

  It seems that the cable must have 7 + 15 pins.

  Please help find the right site to buy this cable. I tried ebay, amazon, etc. to no avail.

  Please consider this as an urgent request and help out me. Thank you

  Kind regards

  Vinciane

  Hello

  You need a good part number otherwise very difficult to find/search. If please use part number for drive on the following link and search. This can help

  http://PartSurfer.HP.com/search.aspx?SearchText=QC339PA

  Kind regards.

• is there such a thing as an internet connection timer? I'm lost and then community internet connection g at different times of the day.

  is there such a thing as an internet connection timer? I'm lost and then community internet connection g at different times of the day. I have just hooked to the nbn (national broadband - Australia Network) and have just bought a wireless modem/router 9323 method. I set it up and it worked. I noticed that I have two internet connections when I go to access the internet. one is a broadband connection and the other is nettcomm wireless 9323. What gives with that?

  You have a connection wireless and broadband that you could use one or the other or both. It is recommended to use one at a time. Contact your internet provider and discuss the issue with them.

• Can I use the SATA port connected to an optical drive to plug in a hard drive?

  I have a Pavilion e9270t desktop, Win7 Pro SP1, and I want to connect 3 HARD drive to the motherboard. Can I do this? Can I use the SATA port connected to an optical drive to plug in a hard drive?

  Thanks, CHemming

  CHemming,

  I've not seen UEIF support in the existing BIOS.

  If your demand on a 3T led, re - consider a maximum of 2 T.

  If you ask to have 3 hard disks, then you can do it without harassing the present cable of CD.

  The cage of your system hard disk will support 3 hard disks. Manual upgrade service

  All you need are the SATA data and power cables. Your Board has 4 SATA data ports.

  When you report back after inspecting your system for SATA power cables, I will move the cables and adapters, if necessary.

• You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed

  You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help

  diana73,

  First of all, make sure that you're connected Administrators account to do.

  How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start , click run and type compmgmt.msc .
  3. In the left pane, and then click disk management .
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
  5. Click change .
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• Vista Home premium unable to connect a network drive or find the storage network

  I have a hard drive attached to the network.  I've never been able to get my Vista machine to map to it.  Network discovery is on.  In the centre network and sharing, if I click on "View full map", Vista tells me 'Windows cannot create a map for the type of network connection', but on that same network card screen if I click on "view computers and devices", I can see the device that I want to connect.  When I try to get the camera when you try to map my network drive, Windows can not see it.  I can ping IP of the device, and I can't open the device html interface in my browser.  My XP and 7 machines see the end reader.

  Try the steps in belo

  http://www.RealGeek.com/forums/my-Vista-wont-draw-me-a-network-map-64463.html

• How can I get Windows 7 Pro 32 bit automatically connect to drives mapped to the startup?

  How can I get Windows 7 Pro 32 bit automatically connect to drives mapped to the startup?

  Hello

  It should connect as much as the other computers with their car are on the account users are properly configured, security passwords are defined and firewall do not block.

  If the system is only yours and there is no need of local network security, enable the guest account on all computers, give them all the permissions and there will be less to worry about connection mapped, but local drive without security.

  PS Ce preceding is based on cable connections. If the connections are wireless, it's another story.

  Due to the maturity of the wireless adapter and their support through the OS, automatic connection could not occur.

  Wireless is great, but most of us try to sneak out of it the uses it was not designed for.

  -------------------------------
  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

• drive external hard when it is connected to the computer says hd not formatted want format you?

  drive external hard when it is connected to the computer says hd not formatted want format you? but it works fine on my other pc, the problem start when I installed registry booster please help thanks

  Hi keo1,

  We recommend that you connect the drive to a different USB port. Also run the disk check for errors.
  See check your hard drive for errors

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

  I just burn a CD with no problem at all.  Using the same type of CD, brand new, I tried to burn another CD and got this error message:

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

  I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message.  No idea why my CD-writer has decided to stop working for me?

  Hi Cierrajade,

  1. you have any third-party DVD burning software installed on the computer?

  Method 1

  You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

  For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  Method 2

  If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Method 3

  If the previous step fails, check if you can burn CDs using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why my laptop wireless computer connect to the internet first thing in the morning and late at night, but not during the day.

  I wonder if you can help me please?

  I have problems with my satellite internet access on my laptop wireless.  He beautifully connects to the router and the signal is excellent. However, I'm unable to connect to the internet.  I can use the laptop first thing in the morning because it connects right away, but I would say that 95% of the day I can't use it at all.  Sometimes it will work later in the evening.  I learned this could be due to the intensity of the signal and that some suppliers to fall during the day.  My desk top connects perfectly (if the weather permits it) but is not on the wireless network.  I had no problem with my laptop when I used my previous service provider.  It becomes more frustrating that the inability to use the internet visited my lap top unnecessary.  I can't use it on my neighbors wireless network no problem at all but they we internet different provider.  Can you please help because I don't know why it works first thing in the morning and sometimes late at night, but not during the day?  No matter where the lap top is the first thing in the morning, it will work even if it is forty feet away.  I can sit during the day with my phone right by my router and it still not connect to internet even though the router signal strength is excellent and desktop is on the internet.  Any help would be great, because it leads me into the wall!  I am using WIndows 7 on my lap top from acer.

  Kind regards

  Julie

  I would like to thank everyone for their help with my question.  I can tell you now that I have it solved and I'm pretty embarrassed to say the least.  Following a change of internet service provider, I put a cable into the wrong port on the router... silly me!  It works perfectly now. Thank you once again.