Re-creating a network home

Similar Questions

• Can I create a network on my Eee PC 1000 H Windows XP Home Edition user?

  Can I create a network on my Eee PC 1000 H Windows XP Home Edition user?

  I want to experience connect me to other computers in my house with the same user name and password. I use it with Windows XP Professional to my work, and I want to know how to deal with the publishing house.
  I have the Eee PC 1000 h running (active) Windows XP Home Edition (Service Pack 3) with OEM product key.
  If I can, can someone please tell me how?

  I'm assuming you're network connection to your XP Pro using the "Remote Desktop connection" machines...  If so, this can be done natively on a XP Home machine as XP Home does not support the remote desktop connection.  XP Home Edition also ensures a file sharing Simple for any user that connects to your computer would be able to authenticate the user "guest".

  There may be other 3rd third-party programs that can allow you to do.

  HTH,
  JW

• Homegroup question - error "a homegroup can be created on a home network.".

  I read a lot of messages and no cover up my problem. I worked through programs of solving problems without result. The network in the network and sharing Center show that my current network is a home network. I want to create a homegroup and click on create and then click on create a homegroup ready to use. I've selected all the sharing options, and then click Next. The process starts and then I get the following dialog "a homegroup cannot be created on a home network... etc.". Why is this occurs when my network is a home network? I tried all built-in diagnostics programs. In the list of services HomeGroup provider runs as is the peer networking grouping.

  I have a router broadband connections LAN and Wi - Fi a desktop PC connected via Powerline LAN, a printer, which can be LAN or USB or WiFi, a laptop and a Tablet, between all that I want to communicate.

  Where I'm going wrong? I have an administrator account and my normal account. Any action that requires authorization from the admin marked upward and the relevant password entered.

  There, can someone help me please?

  So to use the new Windows 7 homegroup feature, you must make sure that IPv6 is enabled.

  You can check to see if IPv6 is enabled on your computer, click Start , and then type network in the search box.

  Then click on network and sharing Center.

  Then click on change adapter settings in the left pane of the dialog box

  Finally, right click on your network connection, and choose Properties. Here you should see Version 4 (TCP/IPv4) and Internet Protocol Version 6 (TCP/IPv6) in the list, and they both need to be audited.

  also

  Make sure that third-party firewalls are disabled as Comodo, etc. Sometimes antivirus programs also come with firewall such as Norton, Kaspersky and McAfee Security software. These programs can block connections and help you connect to a homegroup or implementation.

  one last thing to try! GO TO YOUR BUTTON 'START' AGAIN...

  TYPE 'SERVICES' AND WHEN YOU SEE THE REQUEST FOR 'SERVICES '.

  OPEN THE PROGRAM (SELECT RUN AS ADMINISTRATOR)

  THEN... ENSURE THAT THESE SERVICES LISTED BELOW ARE TURNED ON (MAKE SURE THAT "STARTUP TYPE" IS SET TO AUTO MATIC... THE FOLLOWING SERVICES ARE CORRECT, YOU MUST MAKE SURE ARE "ON" AND NOT ORDERS:

  Services that need to be turned on are listed below:

  • DNS client
  • Function Discovery Provider Host
  • Function Discovery Resource Publication
  • Peer networking grouping
  • HomeGroup provider
  • HomeGroup listener
  • SSDP Discovery
  • UPnP device host

• 'A homegroup can be created on a home network', but I'm on a home network

  When I try to create a homegroup on my Windows 7 Professional Home computer, I get the message error "a homegroup can be created on a home network. But my network is defined on a home network. I tried him affecting the Public value or work and then again and I can not yet create a homegroup. What Miss me?

  Hello

  Try the methods provided below and check if the problem persists.

  Method 1:

  Use the network troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  I suggest you to first check if network discovery is enabled on the computer.
  To activate the discovery network follow the steps:
  a. Open advanced sharing settings by clicking the Start button, then Control Panel clickingControl. In the search box, type network, click Network and sharing Center, and then, in the left pane, click on change settings for sharing advanced.

  b. click the chevron to expand the current network profile.

  c. If the network discovery is disabled, under the network discovery, clickTurn on network discovery, and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, you can access the links and follow the steps and check if it helps to see the computer 2.
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  You can also visit the links:
  Group home sweet home:
  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  I hope that using information provided!

• I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up.

  I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up. Currently I try to modify the INF file but is seeking a help or suggestions in T/S to this problem. Thank you.

  original title: third party INF problems

  Hi Paul,.

  ·         Why are you using a USB port to create a network connection instead of using an Ethernet connection?

  You can see the following article on how to set up a network.

  How to set up a small network with Windows XP Home Edition (PART 1)

• Vista cannot create a network map

  the two 2 computers running Windows Vista Edition Home Premium.  Network and sharing screens put in place identical.  On my computer (from the network and sharing Center), I can click on view full map and it shows my network card.  On the computer of my wife (of the network and sharing Center) she can click on view full map and it rises "Windows cannot create a network adapter for the selected type of connection networl.  I might add that both computers are 'wired' internet/router.

  Any help?

  Hi Duane_TN,

  Are your computer and your computer wife have chipset or card network NVIDIA perchance? or a Linksys router by chance?  This is a post in the forum of Linksys, you might want to check in to see if it applies to your computers:

  Symptom: Windows Vista computers are not put on the Vista network map. Or well, you get the following message when you try to view the full network map: "Windows cannot create a network adapter for the type of connection chosen network." To check go to: PANEL-> CENTER NETWORK AND SHARING. SEE the FULL map (top-right) and find either: A Windows Vista-based computer is listed down under: "the following peripheral discovered may not be placed in the plan. or You get the message, "Windows cannot create a network adapter for the type of network connection. Possible cause: The offending computer has an NVIDIA nForce Networking Controller whose property "priority and VLAN" to "priority"active & VLAN. Solution: Set the property 'priority & VLAN"to"Priority and VLAN Disabled"as follows: Reach: START-> CONTROL PANEL-> ADMINISTRATION-> COMPUTER MANAGEMENT TOOLS In the resultant "computer management" window select: DEVICE MANAGER (left side). "NICs" (right). Expand "Network adapters" and see if it lists a NVIDIA nForce Networking Controller. Right click on 'NVIDIA nForce Networking Controller' and select 'properties '. In the resultant 'NVIDIA nForce Networking Controller Properties' window, select: "Advanced"(tab) ". Under the list of the 'properties', select 'priority & VLAN. for 'Value' assign ' priority and VLAN disabled. References: ---------- How to get the Vista network map works on nVidia MB http://www.TechIMO.com/Forum/networking-Internet/197756-how-get-Vista-network-map-working-NVIDIA-MB.html Other things to check: Update to the latest version of the driver (65.7.4.0 works for me). Article referenced above indicates a previous driver may be bad.

  Hope this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot create the network location in my computer

  I can't create a network location in my computer. I open my computer and right click on an open area and enter the ftp://ftp.irvinerunningclub.co.uk location but get the error message "the folder you entered does not appear to be valid" I have another computer with the same version of windows 7 (home premium) that allows me to create this place without problem. Are there opportunities for a fix or a link to an update that corrects this problem?

  Hi Finlay,

  I understand that when you try to create a network location, you get an error.

  The error message you get usually occurs when Windows try to check the subfolders of the parent and parent. If the parent folder is not configured for WebDAV, the connection attempt fails.

  Please see the article below for more information:

  http://support.Microsoft.com/en-us/KB/2560598

  We can also refer to the link below and check if the steps you followed to create location are correct.

  Refer to the answer provided by Anoop P K replied the July 10, 2012.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/FTP-server-error-the-folder-you-entered-does-not/2d919979-Badd-4134-909e-645028fe56b8

  I hope this helps. Please let us know if you have any additional questions.

• Windows cannot create the network map. Responses of the other devices on the network are delayed or on the network, there is a router incapatible

  Original title: no network card
  I installed a NETGEAR N300 Wireless USB Adapter on my computer which is a desk top Dell 64-bit running Windows 7 Edition Home Premium. There are five computers on my network. Two of the others use the same model of NETGEAR wireless USB adapt. I removed the Ethernet cable after the installation of the wireless adapter. I can say that the new wireless adapter works fine. When I tried to map the network I got the same message that appears in some of these problems: "Windows cannot create the network map. Responses of the other devices on the network are delayed or there is a router on the network incapatible". I have restarted this computer in SafeMode as suggested in the above problems. I tried other things like disabling the wired connection has always existed for the cable. No effect. Then I tried mapping the network on the other computers. All failed with the same message. All the other four computers are 32-bit. Three of these computers are also running Windows 7 Home Premium. They are the best desktop computers. The other computer is a Windows 7 Starter netbook running. It is the 32-bit computer, always using a cable. That will be replaced with the same wireless adapter model NETGEAR. Anyone know how to fix this or is this a bug? It would be nice of the network software of Windows 7 has worked as it is supposed to. TO.

  I went the last wired wireless computer and the problem disappeared. The five computers can view the map now without any problems.

• Impossible to create a network/how to connect to openstack-client CLI

  Hello

  According to the video 'VMware integrated OpenStack - adding networks - YouTube', it shows how to create a network through CLI openstack-client.

  While, I'm new to openstack and don't know how to connect to the CLI client at all.

  I could only try to create a network in the GUI. Here is my configuration:

  

  It looks great, isn't it? However, I get:

  

  Configure anything wrongly? BTW, can someone tell me how to access the CLI openstack-client as the video.

  Here is something you can try.

  If you are using DVS based network, you must enter "dvs" in the section "physical network.

  If you are using NSXV, then you can leave the Network Physics field empty, otherwise you must ensure that you enter a valid dvs moref id.

  For most cases, if you use NSXV, you can simply create network tenent in the project view (then NSXV will take care of it for you).

  Anyway, if you want to use cli, here are the steps.

  1 > connect to the administration server

  2 > ssh-i /home/viouser/.ssh/id_rsa viouser@controller01

  3 > sudo knew.

  4 > source cloudadmin.rc

  Then, you can use the cli freelly.

  Kind regards

  Yixing.

• Creating a network - please help

  Hello world

  I am trying to create a network of laboratory where I install on 1st vm machine - Windows 2008 R2. This vm machine will have a static ip address, that I posted on my home network. This server is also the DC and the DHCP server.

  Then, I installed 3 vm machines with windows 7.

  My question is how to make the server to access the internet is the bridge with the network card host but at the same time providing DHCP for the other 3 machines to winodws 7.

  Config:

  DC: 192.168.0.50

  DG: 192.168.0.1 (home Modem is DG)

  The DHCP scope: 192.168.0.51 - 60

  I want to add 3 Windows 7 machines to the domain.

  I would be grateful someone help with this or if you could point me in the right direction, where it is documented not confusedly. I'm new on this.

  Thank you

  Rather than fill the machines, simply put your DC and the Windows machine to the VMnet even and your DC, put the IP of the Modem home gateway

• How to create a network redundant ISP failover using 2 Airport Extreme

  Hello friends,

  I have 2 different lines of rented ISP related to my Airport Extreme 2. Was curious to know if these 2 AEs can be interconnected somehow to create a network of ISP failover. Users on AE 1 traffic would be transparent reassigned to the AE 2 and vice versa, if corresponding ISP fails. When the access provider is in place, they will return to their AE in elementary school.

  Thank you.

  Not without a smart dual wan router. That is to say done good load sharing.

  Extreme is about as simple a router you can find... He has the absolute minimum of functionality.

  Users on AE 1 traffic would be reassigned transparent to the AE 2 and vice versa

  You can do this by using some manual intervention... a simple change of entry door is usually sufficient.

• Cannot create wireless network

  I'm having a problem making the myRIO create its own wireless network. It has the ability to do so, as shown in the tutorial of myRIO OR video to http://www.ni.com/academic/students/learn-rio/applications/ in the dashboard of data and OR video myRIO @ 57 seconds. In the video, it clearly shows the ability to create wireless network, however, when I followed the instructions in the video, I don't have the option listed to create the wireless network. The attached picture shows my screen and lack clear option.

  I'm new to myRIO and so still learning, but I have no idea why I did not have this option. Any help would be greatly appreciated.

  Thank you

  Juan

  You must upgrade to the latest driver.

• I can't create a network with MyRIO

  Hey guys,.

  I have a 1900 MyRIO and I want to create a network, but I don't have this option as you can see in the picture.

  

  I can only choose between: 'disable' and 'connect with the wifi network. On the second picture (which is fixed), you can see my software installed on MyRIO.

  Maybe you guys can give me a clue what I need to change to be able to create a network

  Greetz Slev1n

  http://digital.NI.com/public.nsf/allkb/627507F4737474F286257CB4007984C6

  This feature has been added in OR-RIO 13.1.  Your installation shows you to 13.0.

• tried to create a network for internet sharing. But the option "activate internet ' is not available in the share window during the creation of the new network

  Please kindly help me out in the question above

  Hi ShamanthKumar,

  Which versions of Windows are the computers that you want network running? (Windows 7, Vista, or XP?)
  
  
  You are using a router, and if so, the computers are connected via cable or wireless?
  
  
  I suggest to look at the following articles that will show you how to network your computers for internet sharing:
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-ICS-Internet-connection-sharing
  http://Windows.Microsoft.com/en-us/Windows-Vista/Networking-home-computers-running-different-versions-of-Windows

• Try to create a new VPN connection but Creat new network connection is grayed out

  Hello world

  Thank you for your help in advance.

  I would like to ask why I could not create a new VPN connection as the "Creat new network connection" is grayed out. I'm also sure that remote access connection manager, and another car once are started.

  I can create an account with my domain administrator account. But once I passed the orginary user, the shortcut to the connection could not be accessed. I also tried to add the user to the local Administrators group, and the result is the same.

  HOEP that you can help.

  Thank you.

  Windows XP Service Pack 3?

  Do you have any software security 3rd party running on this computer?  Or maybe something in group policy that limits access to create a new network connection?

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook