Qosmio G10 - problem starting from ISO CD for Acronis Rescue disk

Hi, I use Acronis image to make backups of hard disk of my G10. I have to be able to boot from the CD Acronis Rescue Media ISO I created. I intercept startup by pressing F12 and change the priority to boot to a CD. He said something like 'Attempt to link', then "Of a media failure, check cable", then continue to boot in XP. Burning CD ISO seems to be ok. My G10 keeps the original v1.0 BIOS. Is this the problem or do I have to upgrade the BIOS. Any ideas would be much appreciated. Thanks for reading this post.

You can use any other CD/DVD bootable with your Qosmio laptop?
I mean the recovery CD Toshiba facilities Microsoft CD or maybe Linux live CD.

Tags: Toshiba

Similar Questions

  • Qosmio G10: problem with Port Monitor

    Hi all

    I have a Qosmio (G10), but I have a problem with the functions of 'Port Monitor-in '. However, I have connected my computer cassette player output ports "port monitor" with the proper cables and jack and get good sound but get no video.

    where I go wrong?

    Thanks in advance.

    Hello
    you need to go to "start / all programs/toshiba/utilities/photo Enhancement utility ' and then click 'monitor input parameters'"
    choose s-video and monitor-in.

    Good bye

  • Qosmio G10-105: standard VGA need driver for Vista

    Hello

    I want software for standard VGA graphics adapt nVIDIA GeForce Go 6600 for Vista

    Please help me

    I put t know what you mean by software for standard VGA graphic card, but I guess you a looking for a driver for Vista graphics card.

    Unfortunately, Vista is not supported on the Qosmio G10 and F10 series and therefore a graphics driver doesn t exist on the driver page.

  • Satellite L505 - 10 M - problem starting from Icidu 16 GB usb key

    A few weeks ago, I bought an Icidu 16 GB usb key.
    And I have the following problem:

    Selection screen of the BIOS does not go as everything else with a prepared Unetbootin usb key with UBUNTU12.04 on my Toshiba L505 - 10 M with W7x64 Home Premium.
    BIOS select (F12) and the bios (F2) Setup stops after you have clicked.
    After that, I installed again with Unetbootin, same result. ICIDU 16 GB.

    On the desktop with Win XP pro X 32 no problems with this stick.
    Selection of the BIOS and Ubuntu started OK.
    FRIEND BIOS
    An another usb Unetbootin doesn't stick with Mint 12 no problem on this Toshiba L505 - 10 M. Hema 4 GB.
    After that, I made the stick Icidu new boot-able with creator usb Multiboot-YUMI with the same result!

    My question is: IS THIS a STICK or A PHOENIX BIOS TOSHIBA PROBLEM?

    ICIDU assistance points me to Toshiba

    The name of the BIOS: Ver 1.00PARTTBL
    SMBIOS version: V2.10
    BIOS date: 05/06/2010

    arnold12

    > an another usb Unetbootin doesn't stick with Mint 12 no problem on this Toshiba L505 - 10 M.
    Does this mean that you could boot from another stick using Unetbootin usb stick with Mint 12?

  • Having a problem starting the HP software for my officejet pro 8600

    When I try to start the program 8600 HP officejet screens pop - up.

    I can also scan is no longer the machine to my computer. can't I make changes to records of destination for faxes/scans.

    I can still

    I would like to do an uninstall of the software which is attached to this printer.

    I can't find the installation disk that came with it.

    Can I do an installation of your Web site to this site and get everything I need without the disc

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&CC=CA&DLC=en&LC=en...

    Thanks in advance for the help

    Brek

    Hi Brek,

    Try to install the automatic fix below, I think that should solve the problem described:

    http://support.HP.com/us-en/document/c03640384

    If that helps you to uninstall software and put it back, since the link that you included above should do the trick.

    Please let me know of any changes,

    Shlomi

  • Mobile applications for blackBerry Smartphones starting from app world for Blackberry at Home Page

    I just got a new blackberry tour and I'm having a heck of a travel time of new applications I downloaded my homepage. I downloaded three apps and managed to move to the homepage without problem by clicking the blackberry button and selecting 'move to the House. It is very clear and I understand the concept.

    But for some reason I can't move all the other apps. I can't move my facebook application because there is no option for "move to home page" or "move". Pandora and all these applications are found in my world in the app world Black Berry.

    Can someone help me? Maybe I'm missing something simple

    Thank you very much!

    You should be able to move the applications to help move the folder then choosing the folder you want where you w\ant to move the.

    Try the following-

    Have a traction battery device reset

    check by changing the theme

  • Problem with 3.6.22 for English downloaded disk image: corrupted

    I'm currently under Mac OS 10.3.9 and Firefox 2.0.0.20. I came across the page

    http://www.Mozilla.org/en-us/Firefox/all-older.html

    which provides images of disk for version 3.6.22. Somehow, my version of Firefox never got under tension / updated to this version of Firefox automatically, which I expect to happen.

    When I click on the link to download the Mac OS X version in American English, I get a message that the disk image is damaged. I thought that the British might work, but it will fail in the same way.

    Firefox 3.6.22 is not compatible with OS 10.3.9? Maybe that's the problem.

    Thank you
    Darling

    Firefox 2.0.0.20 is the last ever release for Mac OSX 10.3.9 and earlier versions. Newer versions are not compatible.

  • Qosmio G10 white screen at startup

    I have an old Qosmio G10 I bought from a dealer in Beijing about 2 years ago.

    After about a year of use at home, I discovered that the screen would turn sometimes white when the screen was moved or shake.
    Some days it works perfectly well, it wouldn't even start without going white.

    Towards the end the screen would show only a picture when the screen was put in a certain angle.
    Now, the screen will just white the second I turn it on.
    I look at a material problem here or there have been known to have software problems with some of the similar laptops?

    Thank you

    T

    Hey Buddy,

    Looks like that the display cable may be loose. I point to a hardware problem, but before you send your machine to an authorized service partner, go to a technician from the local computer and him to check the cables on the screen.

    If realignment of cables does not help while your display is faulty and should be replaced by an authorized partner. I Don t know how long your warranty is, but if you want even when to send your machine to a service partner, you should visit the following link to find the one closest to your country:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  • Problems starting yoga 13

    Hello
    I got a new Ideapad 13 of Yoga that has problems starting from time to time, especially when I carry in a backpack.

    This time, the battery discharged when it was suspended. Connecting it to the power, it begins with orange battery LED and says no device detected start and does not detect SSD.

    Power it off and try to restart, it lights. The battery has charged more than 20% but still does not start.

    Long pressing power until it shuts off and try to restart it sees turning white power led for like 1 or 2 seconds then turn off.

    Unplug the power cable and in him plugging back sees so much power and battery LED light white balance, but computer does not.

    He did before, with the behavior of a few hours to a day or more.

    What could be the problem.

    At took the camera to the centre of care. They say that the problem is the battery.

    Kenya Lenovo declined to replace the battery or manipulate the laptop in the future because I bought it in the United States. Maybe it's what is causing the problem, buying the camera in a country of the first world rather than a third world country where the poor customer service is the norm.

    The stellar nursery fixed also the keyboard bad - it now top down bounces when you type keys.

    Laptop computer now boots, but wonder how long before the return of the issue.

    Whether to ship a $75 battery or rteurn think the * bleep * thing and request a refund.

    Lenovo: for those who can not!

  • Qosmio G10 does not work - some graphic problems

    Hello
    I have a Qosmio G10 a few years back, within the first year of its use the graphics seemed to go crazy after using it for games.
    Since then, I've left the but recently I dug to see if I can get it fixed it as my partner needs.

    1. whenever I start it I have a white screen with sound (I can get the screen each time by pressing F5 (current view).
    2. I tried the system restore cd, but when it finishes I wake a fragmented Windows screen with the beginning bar all over the place, and then it just freezes
    3. However, when I try a professional XP operating system to recover (I found somewhere), it starts up no probs apart from a few blue vertical lines on the screen, starting when I get on the desktop there is no probs although res is set to low and used to move (no graphics driver). Then I tried to load the Qosmio tools & utilities and can support all but the Chipset (that quite fragmented and I have to restart the whole process) and driver nvidia Gforce graphics that I assume will not charge because the chipset?

    I thought it might be a cd of defective recovery but when I changed during a hard drive of new fresh on the wrapper started everthing briefly as it should do this before, he crashed any temptation of power again.

    Pulling my hair out please help!

    Hello

    > 1. Every time I start it I have a white screen with sound (I can get the screen each time by pressing F5 (current view).
    Looks like the screen is positioned on the external monitor and so nothing does not appear on the internal screen laptops. Perhaps this happens because of the changed settings in the properties of the graphics card.

    > 2. I tried the system restore cd, but when it finishes I wake a fragmented Windows start with the bar start screen all over the place, and then it just freezes
    Usually the laptop should start correctly after the installation of the recovery CD. If the laptop freezes then a hardware problem is possible.

    > 3. However when I try an operating system XP Professional to recover (I found somewhere), it starts up no probs apart from a few blue vertical lines on the screen, starting when I get on the desktop there is no probs although res is set to low and used to move (no graphics driver). Then I tried to load the Qosmio tools & utilities and can support all but the Chipset (that quite fragmented and I have to restart the whole process) and driver nvidia Gforce graphics that I assume will not charge because the chipset?

    In my view, your graphics card could malfunction. I come to the conclusion because the laptop works ok until the graphics driver will be installed. Without graphic driver installed the laptop seems to run I think GPU dysfunction could also be the reason why the laptop does not start correctly after the installation of the recovery CD. The restore CD already contains the graphics driver that controls the graphics card chip

    So in my opinion, you should contact the ASP in your country for a control of the laptop.
    Maybe the technicians could find the fault.

    Good luck

  • Problem of graphics card on Satellite P20 552 & Qosmio G10

    Hallo,

    I have two 17-inch monitors computers laptop Toshiba as desktop replacement: 1 x Satellite P20 552 & 1 x Qosmio G10.
    Both are dead graphics card problem.
    The conclusion of my research on the WEB, it's the nVidia FX Go5700 card seems to be the weak point of these laptops.

    On the Satellite Map dies slowly: during startup Toshiba logo disappeared but WinXP logo was very good load, then WinXP loaded with the screen not refreshing and the problem of synchronization, etc..
    The Qosmio died suddenly: activities on the hard drive I guess load WinXP, but black screen (internal and external)!

    I know that, unlike the desktop computer, the graphics processor is not a separate entity; It is built into the motherboard. My questions are:

    (1) who should be blamed, Toshiba or Nvidia?
    (2) how to prevent premature rupture of the card/motherboard?
    (3) the card/motherboard could be repaired?

    Hallo

    I have red Satellite P20 304 and it still works well. Maybe you can offer this story to someone else, but I can say that Satellite P20 is great for laptop. I like it. Old, but still has an attractive design.
    If you have no luck I can understand it but to talk in general and write about weakness is for me nothing more than absurd.

    Nice questions here especially one. :)
    1 - to blame someone will help any. Try to get the replacement and get it working again.
    2. There is nothing you can do. All you can do is to take care of the use of the laptop and do not overheat.
    3. as far as I know that something like this is not possible. In this case the motherboard will be replaced.

    What you can do is to check eBay from time to time. You may be lucky and you can buy used motherboard for a good price and exchange it.

  • Qosmio G10 106 will not start

    My Qosmio g10 primer not. I am getting white vertical lines on each side of the qosmio splash screen. If I try to boot from the drive, the screen turns white with a cursor blinking in the upper right.

    I can't boot into SafeMode either. One of the suggestions, as the machine is longer under warranty and I suspect that it is maybe the motherboard is dead.

    Hello

    It's not easy to tell exactly what part is wrong, but in my opinion there must be definitely something wrong with the hardware.
    I t can give you an appropriate response to the fault, but I recommend asking Toshiba service for opinion. It should have more experience in these matters.
    The service partner could start some diagnostic tests can locate the fault.

  • Qosmio G10 does not start

    Hello world
    I have a qosmio G10 since less than a year. It was just perfect.
    But now it won't start, but I'm unable to identify the source of the problem. (I have some experience with hardware problems, but...)

    When I push the Start button I have the ear of the DVD player running, the lights of the HD for a second and then the laptop seems to be turned on, but HARD drives do not seem to work (there is absolutely nothing on the screen, no boot screen at all). I am able to open the drive of DVD/burner to be able to exist even on the battery.

    Someone will be kind enough to share a few tips? (The FN F5/F1 key does not help)

    Thank you

    Did you hear one beep?
    This unique short beep is displayed if the device succeeded the POST (power-on-self-test) and the material is ok.
    The BIOS of the motherboard will occur always a POST during the power up, usually, this test is required to ensure its correct operation of the system and if a
    failure of the POST will identify the failure and emits a sound signal to ask the technician to take remedial action as soon as POSSIBLE.

    In your case, it s perhaps something wrong with the display. Try to connect the external monitor to the laptop.

    In addition, you can try to remove the battery and unplug the power adapter for a while.
    After several time try to connect the AC adapter again and try to start the laptop.

    If it doesn't help then I would really communicating with the Toshiba service partner in your country for the control of the laptop. Usually, technicians start some tests diagnostic and are able to locate the very fast fault.

  • Problems of sudden wireless connectivity with Qosmio G10

    I had a Qosmio G10 for almost 3 years now, and at least WRT my wireless connection, everything was fine until a few weeks ago.

    Little by little I started to lose the ability to connect to a WLAN after getting out of the mode standby (Win XP MCE): the computer wouldn't connect to my WIFI and would keep erratic jumps among the various wireless networks available in the neighborhood, without connect because they are all fixed.

    Initially, the problem could be solved by restarting the computer and the router.

    Now even that no longer works. I see either all local wireless networks, including mine, without being able to connect, or I see no WLAN at all.

    Windows status bar icons both ConfigFree show the small red cross and the system didn't budge. When I see available wireless networks, I'm trying to connect to my own, but then the computer attempts to connect forever. If I order for Toshiba ConfigFree * _For unchecking the checkbox in the properties window_ wireless * and I'm trying to connect manually my WLAN to the computer by dragging a link the said application to another provider program is in control.

    I have tried everything that came to my mind, the repair connection, enable/disable WZC, install new drivers for the Intel 2200BG, install the new version of ConfigFree... There is obviously some kind of conflict, but I do not understand what it can be.

    I don't know what else to do before decide to reinstall new Windows (oh dear oh dear). Moreover, my ADSL Modem/Router is always the same. The link has been dealt with by WPA/TKIP. Everything works fine with the other 2 computers and a phone with WiFi.

    Said by the way and quite surprisingly, a member of the family in another country began just having exactly the same problem on a Toshiba Satellite A110. In this case, the cause may be associated with the change of a Philips to a Linksys modem/router (either DHCP;) WPA/TKIP unchanged; everything works with another laptop in the same household)

    Can someone please help?

    Why use the CnfigFree tool to connect to the WLan?
    According to your message, you are using the Intel card.
    I would recommend so either use the Intel ProSet WLan client configuration tool or the clean option of Windows!

    > try to manually connect my WLAN to the computer by dragging a link the said application to another provider program is in control
    I assume that this error message is displayed because the ConfigFree is always chosen as tool to configure the WiFi network.

    However, the new installation of the OS may not be bad idea due to the fact that everything would be set up again.

  • Need spare part keyboard no.. for Qosmio G10-133

    Hello

    I recently had a few splashes on my keyboard and now the @ key does not work. Can anyone tell me the part no that fits. I examined the keyboard and found these numbers undereneath

    X 57 T0102351 * & G83C0003X210X

    I tried to find these parts by searching and I get a few similar to G83c, but they do not exactly correspond to the and the image looks different to the left and to the right of the space bar.

    EBay came up with a similar number also.

    Can someone advise me a reliable place to buy one and the approximate price

    If I m remember well Qosmio G10 has a standard keyboard and this is used on many different models of Toshiba laptops, so it shouldn't be a problem to find a.

    Just for example: check it please http://www.sunvalleyus.com/ToshibaKeyboard/G10.html

Maybe you are looking for