Qosmio G10: without infrared

Similar Questions

• Qosmio G10 - how to upgrade the DMI information?

  Help, please!
  I have trouble with Qosmio G10. Toshiba support don't really.help me.

  I changed my motherboard with nVidia 6600 go and 915 PM and new BIOS. Now there are several problems: I tried to run the update tool CD, but it stops and «please use this CD with F10, G10...» Press any key to stop. I can not run product recovery, bad Machine.

  OK, I thought, this Forum search and found that there must be something with DMI. Download Toshdmi10.exe and run it on a bootable CD but the ID does not match!

  Now, I installed XP-Home Edition without recovery of MCE, but it seems that he's in trouble, because the laptop works single fix 598 MHz and has 45 Watt idle Powerconsumentation! It's a lot more before I think. Too much?!

  How can I solve the problem-DMI to run Update tool and recovery CD?

  Hello

  Normally the DMI information can only be updated from an authorized service...

  You wrote about a new mainboard is the same as older mainboard? Maybe the new chipset and graphics card are not compatible with the other pieces of equipment

  In your case I would contact the ASP again. Normally, they should help you if you explain your problem exactly. ;)

• Qosmio G10-137: blue screen after re-install using Recovery CD

  Hi all

  just got my qosmio G10-137 earlier this week after being under repair since the beginning of the month of January! Guys made the repair found no better then install the Dutch version of the operating system. I don't like this, then I took out my recovery CD and began the recovery. Everything works fine and I am asked to remove the media and reboot my PC.

  This beautiful laptop to start early and... Blue screen of death. Restarts, wonder how to restart... count up to normal reboot... BSOD... restarts, wonder how... I choose "Safe Mode"... BSOD... I choose the mode safe mode with prompt... the system.ini file is missing!

  It seems that the recovery CD is bogus.

  If someone has encountered this? Does anyone have any resolution?

  Kind regards
  Wim

  Post edited by: wvl

  Hello

  It s very strange because the recovery CD was tested and install several times. It should work without any problems.
  I put t know where you come from, but the service partner should install the Windows operating system in the same language. In this case, if you bought the device in Dutch the recovery CD and the OS are in the Dutch language.
  Please note that you must use the same recovery CD that came with the device. Another recovery CD will not work.
  What you can do is to test the unit with an original CD of Microsoft Windows. It would be very interesting to know if the blue screen appears with the original Windows.

• Qosmio G10 does not work - some graphic problems

  Hello
  I have a Qosmio G10 a few years back, within the first year of its use the graphics seemed to go crazy after using it for games.
  Since then, I've left the but recently I dug to see if I can get it fixed it as my partner needs.

  1. whenever I start it I have a white screen with sound (I can get the screen each time by pressing F5 (current view).
  2. I tried the system restore cd, but when it finishes I wake a fragmented Windows screen with the beginning bar all over the place, and then it just freezes
  3. However, when I try a professional XP operating system to recover (I found somewhere), it starts up no probs apart from a few blue vertical lines on the screen, starting when I get on the desktop there is no probs although res is set to low and used to move (no graphics driver). Then I tried to load the Qosmio tools & utilities and can support all but the Chipset (that quite fragmented and I have to restart the whole process) and driver nvidia Gforce graphics that I assume will not charge because the chipset?

  I thought it might be a cd of defective recovery but when I changed during a hard drive of new fresh on the wrapper started everthing briefly as it should do this before, he crashed any temptation of power again.

  Pulling my hair out please help!

  Hello

  > 1. Every time I start it I have a white screen with sound (I can get the screen each time by pressing F5 (current view).
  Looks like the screen is positioned on the external monitor and so nothing does not appear on the internal screen laptops. Perhaps this happens because of the changed settings in the properties of the graphics card.

  > 2. I tried the system restore cd, but when it finishes I wake a fragmented Windows start with the bar start screen all over the place, and then it just freezes
  Usually the laptop should start correctly after the installation of the recovery CD. If the laptop freezes then a hardware problem is possible.

  > 3. However when I try an operating system XP Professional to recover (I found somewhere), it starts up no probs apart from a few blue vertical lines on the screen, starting when I get on the desktop there is no probs although res is set to low and used to move (no graphics driver). Then I tried to load the Qosmio tools & utilities and can support all but the Chipset (that quite fragmented and I have to restart the whole process) and driver nvidia Gforce graphics that I assume will not charge because the chipset?

  In my view, your graphics card could malfunction. I come to the conclusion because the laptop works ok until the graphics driver will be installed. Without graphic driver installed the laptop seems to run I think GPU dysfunction could also be the reason why the laptop does not start correctly after the installation of the recovery CD. The restore CD already contains the graphics driver that controls the graphics card chip

  So in my opinion, you should contact the ASP in your country for a control of the laptop.
  Maybe the technicians could find the fault.

  Good luck

• Qosmio G10: Keys detachment

  Several of my Qosmio G10 keys are suspended a thread! (Alt, 2 small button) My PC is still under warranty, but Toshiba have written that, since it is a 'physical' problem, repair (and the survey) will be at my expense. I think it is outrageous. Others have this experience? If so, let's talk... Hubert33

  Hello Hubert

  I'm not an expert for names, but this time I think you are of the Germany. Am I wrong? ;)

  Back to your problem: I guess your Qosmio is one year (date of registration on this forum) and it is possible that there is a physical problem. AFAIK this kind of problems are mainly caused by the user himself. All Toshiba keyboards are built on the same path and I really can't believe that the Qosmio was worse than mine old Tecra 9100 keyboard (still works perfectly).

  I can understand that you are surprised by the response that you got by service, but in my opinion it is a normal reaction, because many users damage books himself and want to use warranty valid. In my opinion, you must call and explain the situation without negative tension. I'm sure that you get a new keyboard.

  Good luck Hubert

• Is it possible to reactivate Qosmio G10 mode standby with Skype call?

  I would like to know if it is possible (and how) to use my Qosmio G10 as a phone with videoconferencing as easy as with a normal phone, I mean how to leave the laptop to low-power mode and let Skype awake it automatically and directly ring when you receive a call.

  I use it without problem when the laptop is not in a sleep mode, but if someone calls when the laptop is in low-power mode, so it does not ring. of course, I don't want to leave a fashion of maximum energy all the time...

  Anyone know a solution? I guess it happens this way because in mode low energy, wi - fi seems to order, because when my computer wakes, then it displays a message saying that 'now he is connected.

  Thanks for any help

  Hi Bea

  Your idea is very interesting but unfortunately I don't think it's possible.
  Activation of the sleep or Hibernate mode is not possible with Skype or other IP phone application because this function must be supported by the BIOS.

  But the BIOS doesn't support something like that

• Qosmio G10: analog video capture camcorder

  Help, please

  I'm new on this forum and the Canada. I bought a Qosmio G10 earlier this year, but had only one chance to try to use it to capture and convert my tapes of videographic V8 recently with no success.

  I tried Toshiba support without hope. I tried the registery for creator VinDVD patch 2, but still he does not see my video input of the camera stream. I tried the two S-video and composite inputs with no result. Anyone with a similar experience?

  I appreciate your help.

  Ministry of education

  Hello

  If you use the S-video in jack so be sure that it of really a s-video-in and not OUT port.
  But the most important parameter is placed in the development picture Toshiba utility.
  My friend had used the Qosmio months and this utility was preinstalled on your laptop.
  That I myself can remember he was placed in the folder utilities from Toshiba. Anyway, look on your operating system for this tool.

  Then enter the monitor input parameters. There you should be able to define the scope settings and select the external input parameters for video, camera, game etc

  I hope I could help

• Qosmio G10 white screen at startup

  I have an old Qosmio G10 I bought from a dealer in Beijing about 2 years ago.

  After about a year of use at home, I discovered that the screen would turn sometimes white when the screen was moved or shake.
  Some days it works perfectly well, it wouldn't even start without going white.

  Towards the end the screen would show only a picture when the screen was put in a certain angle.
  Now, the screen will just white the second I turn it on.
  I look at a material problem here or there have been known to have software problems with some of the similar laptops?

  Thank you

  T

  Hey Buddy,

  Looks like that the display cable may be loose. I point to a hardware problem, but before you send your machine to an authorized service partner, go to a technician from the local computer and him to check the cables on the screen.

  If realignment of cables does not help while your display is faulty and should be replaced by an authorized partner. I Don t know how long your warranty is, but if you want even when to send your machine to a service partner, you should visit the following link to find the one closest to your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

• Problems of sudden wireless connectivity with Qosmio G10

  I had a Qosmio G10 for almost 3 years now, and at least WRT my wireless connection, everything was fine until a few weeks ago.

  Little by little I started to lose the ability to connect to a WLAN after getting out of the mode standby (Win XP MCE): the computer wouldn't connect to my WIFI and would keep erratic jumps among the various wireless networks available in the neighborhood, without connect because they are all fixed.

  Initially, the problem could be solved by restarting the computer and the router.

  Now even that no longer works. I see either all local wireless networks, including mine, without being able to connect, or I see no WLAN at all.

  Windows status bar icons both ConfigFree show the small red cross and the system didn't budge. When I see available wireless networks, I'm trying to connect to my own, but then the computer attempts to connect forever. If I order for Toshiba ConfigFree * _For unchecking the checkbox in the properties window_ wireless * and I'm trying to connect manually my WLAN to the computer by dragging a link the said application to another provider program is in control.

  I have tried everything that came to my mind, the repair connection, enable/disable WZC, install new drivers for the Intel 2200BG, install the new version of ConfigFree... There is obviously some kind of conflict, but I do not understand what it can be.

  I don't know what else to do before decide to reinstall new Windows (oh dear oh dear). Moreover, my ADSL Modem/Router is always the same. The link has been dealt with by WPA/TKIP. Everything works fine with the other 2 computers and a phone with WiFi.

  Said by the way and quite surprisingly, a member of the family in another country began just having exactly the same problem on a Toshiba Satellite A110. In this case, the cause may be associated with the change of a Philips to a Linksys modem/router (either DHCP;) WPA/TKIP unchanged; everything works with another laptop in the same household)

  Can someone please help?

  Why use the CnfigFree tool to connect to the WLan?
  According to your message, you are using the Intel card.
  I would recommend so either use the Intel ProSet WLan client configuration tool or the clean option of Windows!

  > try to manually connect my WLAN to the computer by dragging a link the said application to another provider program is in control
  I assume that this error message is displayed because the ConfigFree is always chosen as tool to configure the WiFi network.

  However, the new installation of the OS may not be bad idea due to the fact that everything would be set up again.

• Qosmio G10: windows from the CD recovery

  If I restore my Windows from a CD that was given with my Qosmio G10, I lose all my files?

  Hello

  Yes, you will lose all your files. If you perform a new installation, please use the expert mode and you'll be able to create two partitions. On the first, you need to install OS and the second that allows you to save all your data.

• Replacement card mother Qosmio G10

  After replacing the card mother a Qosmio G10-120 original Win Xp MCE with the official update (FC43S1 A5A001749010 P000454980 jury), some problems have arisen:

  1. second HARD drive internal no more seen.
  2. all buttons stop "standby/disable rebooting the computer" do not completely take effect (office closed way unexpected but manual power button continues to show the color blue and portable remains active).
  3. always on cooling fan.

  Upgrade the motherboard consisted of:

  1. creation of new channels DMI Council (in particular "Model name" field was set to "Qosmio G10").
  2. loading the CD-ROM TCN0000006 official update tool.
  3. no recovery BIOS or EC/KBC.

  Any idea?

  I m wondering how you did update the information in the DMI?
  As far as I know that the Toshiba authorised service provider is able to update information DMI as the model name, version number, etc. using utilities and special tools.

  I googled for the motherboard part number, you have deposited in your original thread, and it seems that this motherboard has been developed the Qosmio F15 series.
  So maybe his bad card mother

• Qosmio G20 screen is comatible with display Qosmio G10?

  Hello

  Dose anyone know if the screen Toshiba Qosmio G10 is compatible with the Toshiba Qosmio G20?

  Thank you guys

  Of
  Sweet

  Hello

  I think display of the G20 should be compatible with the Qosmio G10 display.
  I searched a bit and found that the Qosmio G10-100 PQG10E was fitted with the 17 "WIDE XGA LCD.
  The Qosmio G20-101 PQG20E supports the same 17 "WIDE XGA display.

  Therefore, it seems that both units use the same screen.

• View properties (Qosmio G10)

  Hello

  Basically, I tried to show my parents on their TV from uni photos (Qosmio G10 - WIn MCE 2005). And it worked! Then, because I thought that the resolution was too thin, I decided to fiddle around with the settings in display properties as well as the utility of GeForce FX Go5700 to change and carried far changing the settings. After I pressed a button or another, the missing TV picture. I can't get it back.

  Anyway to reset or the default display properties and / or the GeForce utility - at least that will aloow me to continue to use my laptop for another presentation must in particular to uni.

  Thank you very much

  WB

  Yes, while the Qomsio is running, press Fn + F5 until you get a picture on its internal screen.
  Later,.

  Alcahest

• Qosmio G10-103

  Hello

  I was wondering if someone could help me with the Qosmio G10 - 103 with 2.0 GHz.
  I ve seen this laptop Qosmio in several German online shops but I can´t find information on the Toshiba Homepage.
  Is it a new model yet to be published? If Yes when it comes out?

  Kind regards
  Munchkin

  Hello

  Toshiba product model names have 4 components (Qosmio) family name, the series of products (G-series), the model (G10) and exact model number (G10 -103).

  This number is by country, because almost all the countries of europe have different demands of material, then Toshiba shipps different models in different countries!

  As far as I know that the Qosmio G series are shipped throughout europe in Dec.

  Note: Be careful with a computer purchase foreign toshiba laptop, the software package ad OS is also country and language specific! To get the right version of the operating system is pretty hard!

  Goodbye Tom

• Qosmio G10 connecttion to a domain

  How can I connect a Qosmio G10 to a domain, when I go to change in properties the system I don't have access to the option field, am I missing something?

  Hello

  In system properties under the name of the computer in the back, there is possibility to rename this computer or join a domain change click. Check it please.