QR barcode Code problem

Dear all,
I am doing a project. I need detect code and QR Code barcodes. The issue I'm having is that I can not detect them simultaneously. I push a button for Code bar, it is scanned and detected, then I have to press another button for QR code, then it gets scanned and detected. Therefore, I can't back them up in a row. I get data such as the attached picture. The problem in this is that the bar code represent student, and when I search the database using bar code number, I get nothing, because this line had no QRCode. I want them to appear in a single line. HEL ME PLEASE! THX.

Tags: NI Software

Similar Questions

  • "Unknown device" USB Barcode scanner, problem with the USB controller driver?

    Hello

    I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

    The brand and model of the bar code scanner is:

    Datalogic Heron D130 USB.

    When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

    Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

    It works fine until you restart the computer.

    After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

    I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

    I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

    Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

    I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

    in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

    I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

    Bought more than 40 computers that I have this problem.

    These were bought at different times with two different for suppliers

    Computer model are the following

    HP ProDesk 1 400 P/N5S21EA

    Specifikations:

    http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

    Does anyone have an idea what could be wrong and how to fix it?

    Thanks in advance

    Sincerely

    Robert T

    Hello

    The problem is not power - related.

    We use passive USB hubs that solves the problemon these computers.

    (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

    The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

    When you let another usb-controller support in handshakeing (such as a usb hub), it works.

    Datalogic or Intel would like to acknowledge this error.

    Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

    We get more performance for your money when AMD is usually less expensive to purchase.

    And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

    I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

  • execution for FPGA parallel code problem

    Hello

    I have a problem with the execution of the code in parallel on the FPGA to a cRIO-9073.
    Running the code takes more time than expected.
    The problem is described in the attached PDF file.

    Kind regards

    Beurms Jasper

    Hi Jasper,.

    the first problem is due to DATA streams! THINK THE STREAM!

    You have three simultaneous sequences. The loop iteration time depends on the slowest component in the loop. If you don't need to ask why the 'low frequency sequence' minimalist other sequences?

    The 2nd problem cannot be discussed looking at the pictures. What are those who wait function? milliseconds, microseconds, ticks?

    Did you know that the IO nodes also take some time to treatment?

  • error code 19; TSSTcorp CD/DVGW TS-H652M ATA Device will not load at startup upward due to incomplete or registry problem? What can I do from here now, Windows VISTA-32 bit; gives this code problem also 00000013, thanks for your time.

    error - coded 19; involved device is CD/DVGW - TSST Corp. CD/DVGW TS-H652M ATA DEVICE. does not load at startup, nor do I have an icon E:\drive on my related 'Computer', only C and D of backup disks, since it has failed to load.  E is my player device on the windows vista operating system to 32-bit.  I tried the driver down load and FIXIT online program, they say that my drivers are repairable, but the problem is in the registry and device instructions at the beginning upward. What should I do next!

    Hello

    19 code means there is a driver conflict such as two devices attempt to use the same resources.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack.

    Normally the above will solve this problem otherwise working your way down through them, even if you did
    them before.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    Hope these helps.
    Rob - bicycle - Mark Twain said it is good.

  • Windows Installer and 641 & 80070641 Error Codes problems

    something happened to the installer of windows on my computer. I have vista home premium 32 bit. I tried to search your site to download the installer, but I found nothing. I tried to install Java and he said: he just couldn't because windows install could not have access. and I tried to install windows updates and get error codes message 640 & 80070641. everything worked until a few days when I tried to update that nothing has been downloaded on my computer before of errors.

    Hi John and Kathy,

    In addition to the suggestion of Ravinath P Date dated May 21, 2012, you can also follow the steps mentioned below and check if it helps.

    I suggest you to perform the following steps to rebuild the windows service install.

    Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ ( )

    How to back up and restore the registry in Windows

    a. open Notepad.

    b. copy the following into Notepad and save it asreset.reg on your desktop.

    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\msiserver]

    'DisplayName"="@%SystemRoot%\\system32\\msimsg.dll,-27 '.

    "ImagePath" = hex (2): 25, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 72, 00, 6f, 00, 6f, 00,------.

    74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 6 D,------.

    00,73,00,69,00,65,00,78,00,65,00,63,00,20,00, 2f, 56, 00, 00, 00, 00

    'Description"="@%SystemRoot%\\system32\\msimsg.dll,-32 '.

    "LocalSystem ObjectName"=""

    "ErrorControl" = DWORD: 00000001

    "Start" = dword:00000003

    'Type' = dword:00000010

    "DependOnService" = hex (7): 72, 00, 70, 00, 63, 00, 73, 00, 73, 00, 00, 00, 00, 00

    "ServiceSidType" = DWORD: 00000001

    "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

    00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 72, 00, 65, 00, 61, 00,------.

    74,00,65,00,50,00,61,00,67,00,65,00,66,00,69,00, 6 C, 00, 65, 00, 50, 00, 72, 00, 69,--------.

    00,76,00,69,00 6 c 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 c, 00, 6f 00, 63, 00,------.

    6B, 00, 4 d, 00, 65, 00, 6 d, 00, 6f, 00, 72, 00, 79, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

    00,65,00,67,00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00,------.

    73,00,65,00,42,00,61,00,73,00,65,00,50,00,72,00,69,00, 6f, 00, 72, 00, 69, 00, 74,------.

    00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00,------.

    65,00,43,00,72,00,65,00,61,00,74,00,65,00,50,00,65,00,72,00, 6 d, 00, 61, 00, 6e,------.

    00,65,00, 6F, 00, 74, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 C, 00, 65, 00, 67, 00, 65, 00,------.

    00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,72,00,69,00,76,00,69,------.

    00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 53, 00, 65, 00, 63, 00, 75, 00, 72, 00,------.

    69,00,74,00,79,00,50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00,------.

    00,53,00,65,00,43,00,68,00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 00, 69, 74, 00,------.

    66,00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53,------.

    00,65,00,50,00,72,00, 6f, 66, 00, 00, 69, 00, 6 c, 00, 65, 00, 53, 69, 00, 00, 6F, 00, 67, 00,------.

    6 c, 00, 65, 00, 50, 00, 72, 00, 6f, 00, 63, 00, 65, 00, 73, 00, 73, 00, 50, 00, 72, 00, 69, 00, 76,------.

    00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

    72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

    00,65,00,67,00,65,00,00,00,53,00,65,00,43,00,72,00,65,00,61,00,74,00,65,00,------.

    47.00, 6 c, 00, 6f, 00, 62, 00, 61, 00, 6 c, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65,.

    00,67,00,65,00,00,00,53,00,65,00,41,00,73,00,73,00,69,00,67,00, 6F, 00, 50, 00,------.

    72,00,69,00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00, 6 b, 65, 00, 00, 6F, 00, 00, 50, 72,------.

    00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 52, 00, 65, 00,------.

    73,00,74,00, 6f, 00, 72, 00, 65, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

    00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00, 73, 00, 65, 00,------.

    51,00,75,00, 6f, 00, 74, 00, 61, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

    00,65,00,00,00,53,00,65,00,53,00,68,00,75,00,74,00,64,00, 6f, 77, 00, 00, 6F, 00,------.

    50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 54,------.

    00,61,00, 6B, 00, 65, 00, 4f, 77, 00, 00, 6F, 00, 65, 72, 00, 00, 73, 00, 68, 00, 00, 69, 70, 00,------.

    50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 C,

    00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00, 50, 00, 72, 00, 69, 00,------.

    76,00,69,00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 42, 00, 61, 00, 63, 00, 6 b------.

    00,75,00,70,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00,------.

    00.00

    "FailureActions" = hex: 84, 03, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

    00,01,00,00,00, c0, d4, 01, 00, 01, 00, 00, 00, e0, 93, 04, 00, 00, 00, 00, 00, 00, 00, 00, 00

    c. Click Start.

    d. type regedit in the search field and press to enter.

    e. in the registry change windows click onfile and select import.

    f. navigate to the location where the reset.reg file and select the file.

    g. click ok on the windows screen once the registry is merged successfully.

    h. restart the computer and check if updates installs.

  • Update error 800b0100 code problem?

    Get the code above when you try to install the update on vista.

    Hello

    It is the Microsoft information to solve your problem.

    "Windows Update error 800b0100"

    http://Windows.Microsoft.com/is-is/Windows-Vista/Windows-Update-error-800B0100

    "Error 0x800B0100 when you try to install updates for Windows or Microsoft Updates.

    http://support.Microsoft.com/kb/956702

    See you soon.

  • HP Envy 4500: Claim Code problems. The printer is already done.

    Hello

    I am trying to add my new HP Envy 4500 to my account connected to HP, but when I enter the claim code, I get "the printer is already claimed. "In order to claim this printer, you must remove the previous owner.  Looking through the forum, it seems to be a fairly common problem.  I disabled / re-enabled web services to get a new code to claim, but it gives the same result.  I even reset the printer default and tried.  This time, connected HP indicated that it had saved my printer successfully, but when I go to the devices tab of the web page I am greeted with the message "it looks like you have not added all devices connected HP account".

    Any advice would be greatly appreciated, I'm hoping to use the instant program of HP ink, but unless I can add the printer to my account, I will not be able to.

    Thank you

    I managed to get this working afterwards by registering a new user account with HP with a different email address.  Not an ideal solution (and apparently not a rare either) but at least it works now.

  • Region with Vista Home DVD code problem

    I have a sony vaio cr290 bought in the United States. I would like to change the dvd region code HT now moved it to the India. its asks me to insert the media to change the region code, I hv tried 4 left. Help, please. I have no Vista support since the laptop is with Vista Home installed. The DVD recorder using pioneer dvd - rw dvr - k17 ata device.

    Hello

    Check with the system manufacturer and the manufacturer of the drive because there may be limits in place
    to avoid changes.

    Have you checked control panel - Device Manager - CD/DVD - double click on the drive.
    DVD region? Be sure to be logged on as ADMINISTRATOR

    Have you tried to connect as ADMINISTRATOR mode without failure?

    You have any CD/DVD programs running at startup that might be locking the
    by car?

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Autoruns - free - see what programs are configured so that it starts automatically when
    your system boots and you connect. Autoruns also shows you the complete list of the registry
    and where applications can configure Auto-start for the files settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    --------------------------------

    DVD region information
    http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

    DVD region code
    http://en.Wikipedia.org/wiki/DVD_region_code

    You can buy devices that claim to be region free and software that claims to be able to
    other regions to read even if I have no experience with those.

    Region Free DVD Player Information
    http://www.dvdbuyingguide.com/codefreedvd/Codefree-FAQ.html

    Region Free & Code free DVD player information
    http://www.dvdbuyingguide.com/codefreedvd/bigfaq.html

    Forums - a lot of expert real help
    http://Club.myce.com/

    I hope this helps.

  • Keyboard Bluetooth pairing code problems

    I have a keyboard microsoft bluetooth keyboard 6000, after getting a blue screen that I lost the connection with the keyboard, when I try to associate the keyboard of my computer, the computer detects the keyboard, but as I go to the next screen, it immediately jumps to another screen that informs me that I need to use the code for pairing with the device. Why?

    Hi Freckles1,

    1 have you used the matching code provide with the mouse and check if it works?

    2. did you of recent changes on the computer?

    Pairing code is another term for a number that associates your computer with a Bluetooth compatible device. The security key terms and pairing code are often used interchangeably.

    Using authentication keys compatible Bluetooth devices

    http://Windows.Microsoft.com/en-us/Windows-Vista/using-passkeys-for-Bluetooth-enabled-devices

    First, I would say that you are using the pairing supplied with the product code and check if it works.

    If the previous step fails then remove and then reinstall the device

    (a) click the Start button, select Control Panel, click hardware and soundand then click Bluetooth devices.

    (b) select the device that is not working, and then click Remove.

    (c) click Add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), check the box my device is set up and ready to be found and then click Next.

    (d) if the device is not found, repeat the previous step. When the device is found, select it, and then click Next.

    (e) follow the remaining instructions in the wizard.

    Make sure that the Bluetooth adapter for your computer is attached and turned on, and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.

    The problems with Bluetooth devices

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How can I fix the error code: problem 80072EFE

    My system will not update automatically.

    It keeps showing me error code: 80072EFE

    How can I solve this problem?

    Windows Update error 80072efe or 80072f76

    http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072efe-or-80072f76

    If this does not work, then try the troubleshooting Windows Update tool
    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

    Try to reset Windows Update
    http://support.Microsoft.com/kb/971058

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    (The steps # 1 a, 1 b, 1 c, 1 d and 1e)

    Disable third-party firewalls.

    Also: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/win-7-updates-keep-repeating/12ecb219-c374-e011-8dfc-68b599b31bf5

    J W Stuart: http://www.pagestart.com

  • 'Page' does not name a type with the given Code problem

    Hello

    I try the code on this page , but I'm getting 'Page' does not designate a type in the Test.hpp file with the following line

    private:

    Page * appPage;

    Container * mRootContainer;

    };

    What could be the solution for this problem?

    OK I solved this problem with the addition of bb::cascades with the page
    Please take a look at the following code

    private:

    BB::Cascades:page * appPage;

    BB::Cascades:container * mRootContainer;

    };

  • Activation Code problems.

    I bought Adobe CC and have an activation code.  But my current installation, which has expired, has not recognized.  I have retried enter the activation code, but he now says it was used already.  What should I do?

    Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    Don't forget to stay signed with your Adobe ID before accessing the link below

    Creative cloud support (all creative cloud customer service problems)

    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  • Flash as2 as3 attachMovie code problem

    Hi guys,.

    I make a game in which I create several clips from video placed randomly, directly from the library onto the stage.

    I am a good as3 developer and can understand most of the concepts of as3 with the exception of tables. But I can't find a solution for the attachMovie()

    Here is the code that causes the problem. (I have excluded the other pieces of code)



    Object is the name of my clip

    var objectNumTracker = 1;

    var depth = 555;

    current_object = attachMovie ('object', 'object' + objectNumTracker, depth)

    objectNumTracker ++;

    depth ++;

    with as3 you assign a class name (for example, YourObjectClass) and use the 'new ': constructor

    var current_object:YourObjectClass = new YourObjectClass();

    addChild (current_object);

  • Is - this problem of data image or any other code problem?

    Hey, guys:

    I have a question:

    I tried to create a thumbnail image for each image stored in a table called sor_image2 and save it to another column named "thumbnail" of the same table. However, I can run my procedure only to deal with a limited number of photos, say, less than 1000 images without problem; If I tried to run my procedure to process more images (for example, 5000 images), I received an error as follows:

    ORA-29400: data cartridge error
    IMG-00730: failed to process the empty image
    ORA-06512: at "ORDSYS. ORDIMERRORCODES', line 75
    ORA-06512: at "ORDSYS. ORDIMERRORCODES', line 65
    ORA-06512: at "ORDSYS. ORDIMERRORCODES', line 29
    ORA-06512: at "ORDSYS. ORDIMG_PKG', line 134
    ORA-06512: at "ORDSYS. ORDIMAGE", line 1387
    ORA-06512: at "get OUT. SOR_IMAGE_SERVICE', line 110
    ORA-06512: at line 1
    29400 00000 - 'data cartridge error\n%s '.
    * Cause: There was an error in an outpatient procedure of data cartridge.
    This message will be followed by a second message gives
    more information about the data cartridge error.
    * Action: See the documentation for data cartridge
    for an explanation of the second error message.

    Here is my code:
      procedure Sor_Create_Thumbnail(P_s_Command IN VARCHAR2) as
  
  thumb_blob blob;
  current_blob blob;
  current_image_id number;
  
   cursor cur_All_Images_ID is
        SELECT image_ID
        FROM sor_image2
        where image_id<5000;
        
  begin
  
    open cur_All_Images_ID;
    
    loop
    
      fetch cur_All_Images_ID into current_image_id;
      
      select image into current_blob
      from sor_image2
      where image_id=current_image_id;
      
      dbms_lob.createtemporary(thumb_blob, true, DBMS_LOB.CALL);
      ordimage.processCopy(current_blob, P_s_Command, thumb_blob);
      
      update sor_image2
      set thumbnail=thumb_blob
      where image_id=current_image_id;
      
      dbms_lob.freetemporary(thumb_blob);
      
      commit;
      
      exit when cur_All_Images_ID%NOTFOUND;
      
    end loop;
    
    close cur_All_Images_ID;
    
    commit;
  
  end;
    and I performed my procedure:
    execute sor_image_service.Sor_Create_Thumbnail('maxScale 300 300');
    I am using Oracle 11 G R2. I don't know if this problem is caused by a corrupted image, or no limit code or same privilege, could someone give me a clue about this problem?

    Thank you very much!

    You can try

    procedure Sor_Create_Thumbnail(P_s_Command IN VARCHAR2) as

  thumb_blob blob;
  current_blob blob;
  current_image_id number;

   cursor cur_All_Images_ID is
        SELECT image_ID, image
        FROM sor_image2
        where image_id<5000
and dbms_lob.getlength( image ) > 0;

  begin

    open cur_All_Images_ID;

    loop

      fetch cur_All_Images_ID into current_image_id, current_blob;

      exit when cur_All_Images_ID%NOTFOUND;

      dbms_lob.createtemporary(thumb_blob, true, DBMS_LOB.CALL);
      ordimage.processCopy(current_blob, P_s_Command, thumb_blob);

      update sor_image2
      set thumbnail=thumb_blob
      where image_id=current_image_id;

      dbms_lob.freetemporary(thumb_blob);

      commit;

    end loop;

    close cur_All_Images_ID;

    commit;

  end;

    Published by: ascheffer on February 11, 2013 16:43
    Changed the status of output to the top

  • AS3 Code problem

    I wrote this code:

    match = new Array();

    matchHoriz = new Array();

    line = 0;

    While (line < gridRows)

    {

    Col = 0;

    While (col < gridCols)

    {

    match = getHorizMatch (row, col);

    If (match.length > 1)

    {

    match.unshift (Grid [Row] [col]);

    matchHoriz.push (match);

    // ***1

    }

    If (match.length == 0)

    {

    Col ++;

    }

    on the other

    {

    Col = col + match.length;

    }

    match. Length = 0;

    }

    line ++;

    }

    // ***2

    If I trace (matchHoriz) on position / / * 1 it shows the correct result (an array of corresponding objects).

    If I trace (matchHoriz) on position / / * 2 it shows nothing.

    What is the problem on my code?

    Well, when you switch concat, you put is no longer in a reference to the mapping table. Instead, you copy its content, which is what you apparently thought that you did before.

Maybe you are looking for

  • Replacement PC with an iPad

    Hello My MacBook Pro is finally dead. I'm looking for a replacement but plans to go it alone with just an iPad. my MBP in recent times served only two objectives; a place to store my photos and videos (which are all also fully stored in iCloud by usi

  • Security in other countries

    Hey there, I live in Germany and I want to buy the self of the iphone in the US (I'll be there on vacation for two weeks). I checked everything related to technical issues and the new iphone will be completely usable in Germany. But I have one more p

  • What is Firefox (internet exporer) equiv ctrl-N?

    When I type CTRL-N, it opens a new window as it should.But the page load of the new window is not the exactduplication? How can I get it so that it opens a window of exact samewith the same exact URL?

  • Why do I get the message asking me to allow Firefox to make changes to my computer whenever I click on the Firefox icon?

    When I click on the Firefox icon on my desktop, instead of struggling just to the Firefox page, I get a box asking me if it's good for Firefox to make changes to my computer. If I hit Yes, I get the Firefox page. If I don't hit, I get nothing. What i

  • BLUE SCREEN: UNABLE TO START EVEN IN SAFE MODE

    Hi, I have Windows XP Home Edition. My PC was working fine last night that running slow exemely.  Tried to launch today, but he gave me the following message is displayed: "A problem has been detected and window has been closed to prevent damage to y