Question A100 - 01 Q satellite in combination with the Syncmaster 226BW

Similar Questions

• Does SOUL used in combination with the hierarchy of position for purchase requisitions

  Hello

  We use the hierarchy of position for purchase requisitions.

  Can we use management engine approval in combination with the hierarchy of existing post for purchase requisitions for workflow routing more flexible?

  Kind regards

  Natalia

  Hi Natalia,

  Using hierarchy Position in the SOUL is supported only in R12, please refer to the following document:

  Using SOUL, creating approval routing at a certain Position in the hierarchy of Position HR [ID 1501433.1]

  Hope this helps,

  Please, if this response has answered/solved your question/query, please mark it as correct or useful to facilitate the correct answers to the members of the community.

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

• My Satellite A100 does not support SDHC cards with the internal card reader

  Hello

  My Satellite A100 can't stand my sandisk 4 GB SDHC.
  'normal' SD cards are not a problem with the internal card reader, and there is no problem with the 4 GB sandisk SDHC card using an external card reader.

  is there a software solution?

  regrads,
  Itock

  I don't have the time to read the manuals for your model of laptop users, but can be registered to all supported cards. I guess SDHC not registered and not supported.

  I don't know what you mean with the software solution, but as far as I know, update for multimedia card reader is not available.

• Satellite L40 - 139 with the combination FN + volume problem

  Hello
  at first, I want to say sorry for may English. It's so good, but I'll try to explain my probblem.
  Yesterday I installed the XP system and everything works fine. After installation I can't press FN with the volume I want to say, some with works of function FN buttons, but some of them don't work. Only those function don't switch (FN + volume) volume of work and increase the volume level up/down(FN+ up/down arrow)

  Someone know how to fix/repair it?

  Marcin

  Satellite L40-139 belongs to the * PSL40E * series.
  Where did you find the Toshiba XP drivers for this laptop series?

  To my knowledge at THIS time the XP drivers are not released on the Toshiba driver page and so I guess that a driver missing XP or is not compatible BIOS might be the reason for you question.

  I think you have to wait until all drivers XP and BIOS XP will be available for you series!

  Greetings

• Satellite P200 - problem with the use of disk HARD original as external drive

  I've been pulling on my hair for a month now and could do with help

  I have a Satellite P200 series PC laptop and have recently updated from the 200 GB for a pair or 320 GB HARD drive. No problem

  The question I have is that the old drive of 200 GB system I am unable to use it in any other machine or according to and external storage device.
  The original secondary disc works fine few matter where I use it... (In my PS3 at the moment)

  When I install the orgional system drive in my laptop and rebuild windows it it still works 100%.
  Hance a good work of 200 GB of HARD drive.
  Take it out and serve in another machine of storage that it won't - boot all I get is cyclic redundancy errors

  I formatted, low level run endless disk tools
  WD test came back with diagnostics Test::Read 11 - cable sector error!

  Even as a drive on the original laptop is the same

  All ideas taken with gratitude that I don't want to lose a good 200 GB HARD drive

  Thank you very much
  Roger

  Hello!

  The external box is maybe defective, because you said that the HARD drive works in your laptop and the PS3 without problem.
  You can test the HARD drive in another external case?

  WD test unknown to me but I always use the Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. You can then the HARD drive.
  On the same site is a user's guide if you want to know more.

  Good bye

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• Re: Satellite L300D comes with the recovery disk?

  Hello

  I don't get a recovery disk when I bought my Satellite L300D.
  Does anyone know if Satellite L300D is provided with the recovery disk?

  As much I know computers made from the middle of 2007 aren't provided with the operating system recovery disks. How can I find out what year my satellite is made?

  Thank you very much

  All new models of laptops including your are delivered without the recovery DVDs.
  Recovery image is saved in the folder called HDDRecovery on the second partition.

  Akuma is right. "You need to create a recovery media using preinstalled" Toshiba Recovery Disc Creator. The shortcut that you can find on the desktop. Please do so and for the creation of recovery media I recommend you to use media high quality as TDK or Verbatim DVD-R.

  You can install OS using the F8 key at startup to the top. The guideline how to proceed you will find under http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
  Note please. This can be done if this recovery image is not modified or if you install another operating system on the first partition. the second partition can be in original condition, but this F8 option will be gone.

  If you have any other questions please let me know.

• Satellite U500 - problem with the cooling system has been detected

  I have a Toshiba Satellite U 500 series, and I just got a message saying "a problem with the cooling system has been detected. Please turn off the power immediately and return it to service.
  Before that, I would like to know if anyone has had this problem and if there is a software solution?
  HIERARCHICAL

  Check HERE to see if anyone else had this problem in the past.

• Satellite U400-177 with the slow start of vista

  About two weeks ago, I bought a computer laptop satellite U400-177, with an operating system installed vista Home premium. Since the first moment, when I turn on the machine, the operating system startup is desperately slow! It takes about five minutes for the laptop end the beginning to start working! Is there something I can do to compensate for the departure faster?

  Thank you!

  Hello

  I m U400 owner.
  I must say that a lot of apps is preinstalled by Toshiba and this could affect the startup time

  First of all, you must either update the Tempro tool or you should remove it (if you need t n).
  Second, you must start the msconfig and in the Startup tab you could disable some not important background processes.
  I put t know what is important to you and you want to use applications.

  If you n t know the meaning of some process then google for that in most cases, you could get a few details

• Satellite A60 - conflict with the clock

  Greetings, I have a problem with a Toshiba Satellite A60, is this: the PC clock ahead a second as the time goes from 4 seconds, IE in the pc are the clock is 09:29:17 and at the same time but to change one second on the pc, like this: 09:29:18 and the clock has advanced 4 seconds 09:29:21, running and disassemble the laptop and check the battery internal from the Board of Directors and is soldered to the pc If you can not take off, but I think that working with the battery of the laptop, the pc does not have windows, in fact I go on any hard drive and go to the BIOS and still gives the error.

  Could this be? I suggest they do? Thank you.

  My language is Spanish, so I apologize for my English.

  Hey mate,

  To be honest I really don t know what exaclty average. Only, I understand that you have problems with the clock.

  The RTC (BIOS) battery can be charged if you leave the laptop connected to the AC adapter. This support also the RTC battery.
  Check this box!

• Satellite A200 starts with the message "missing operating system".

  IM wondering if anyone can help... I have a Toshiba Satellite A200, who, at the start, just comes up with a black screen and the "system of missing operating" in the upper left corner.

  I looked for solutions on the net. Nothing is really done. I tried to start in safe mode using the F8 function key, but it did not work. I tried to boot from a vista recovery disk. That did not work. I tried to reinstall vista and it came just with the error 0 x 80070002. Im stuck and don't know how started it in safe mode so that I can transfer data and then reinstall vista (reimage) on this subject.

  Can you make suggestions?

  Hello

  Have you tried to get into the Bios and check if a hard drive is recognized? If not, the hard drive no longer works. If so, try to make another copy of Windows disk.

• Satellite L300 starts with the message "JCQFX is compressed.

  I have a toshiba satellite l300 and worked very well until it turns off, when I turned on the computer laptop back it came with the message
  JCQFX is compressed
  Press the keys ctrl, alt and del to restart
  I did it but it keeps going back to the same thing, please can someone help me I am at my wits end and trying to monopolize my laptop girls thank you in advance x

  Hi the Welsh,

  Never heard about this error message then I asked Google on this subject and that therefore say: also no information :(
  Very strange

  So, step by step:
  Do you see the same behavior when you start Notepad (Windows) in safe mode?

• Satellite P200D - problem with the ATI (atikmdag) driver

  Hello

  My system:
  P200D-111 HD 2600, AMD Turion 64 X 2, Vista Home Premium 32 bit

  The problem:
  White, computer screen stops him self or the Vista comment: driver atikmdag caused a problem and to restore.
  Whenever the computer stops him self, Vista gives me the answer atikmdag caused the problem.

  Yesterday I tried to compare the system, but at the end of the display flares program and the computer stops.

  My Question:
  Is a pilot most recent HD 2600 in work or everyone has the far right for me?

  Stand by. You described the problem, but we don't know what you've done before. Have you updated to display driver? Have you noticed the same thing with the factory settings?

  > Yesterday I tried to compare the system, but at the end of the display flares program and the computer stops.
  This means that you were not able to complete the recovery procedure?

• Satellite A200 - problems with the AC adapter / CC

  Hello

  The problem concerns a Satellite A200 (PSAF6A-02H01N).

  Recently, there was problems with the laptop, taking several attempts to boot to Vista, it would lock up while loading or just hang and freeze just after loading Vista.
  But once it was up and the laptop running would be happy working for hours with the AC adapter is plugged in.

  The problem got worse now and the laptop will not load Vista end without crashing.
  We have now reduced the computer down to have only a problem when the power adapter is connected.
  The laptop battery will charge normally with the AC adapter is plugged in and the laptop on standby or off.

  The problem persists with the AC adapter is plugged in and the battery removed.
  The laptop will start and run perfectly with battery and no power adapter plugged. Once the AC adapter is plugged in the laptop indicates that the battery is charging and then after a few seconds it crash or freeze and the only escape is a full stop.
  The laptop will not work under the battery power for 30 minutes max.
  I checked the output voltage of the AC adapter and this seems to be a consistent 19.4 Volts.

  Is this only a problem of AC adapter or the problem with the laptop?

  Thanks in advance...

  The Canada Gazette

  I lifted the previous discussions on this problem and found one that was very similar, but unfortunately the user decided not to find the problem of the road, save money and buy a new laptop instead! Hmm. !! .. seems to me like this might be a prob. material. Maybe a new motherboard?... anyone have an idea of what are the costs for that perhaps? .. an ASP or decent technician backstreet?...