Question about adding a bundle + complaint.

Similar Questions

• Questions about adding a NAS to the existing environment

  Hello

  We have an existing deployment of VI with an EMC SAN and three ESX host.  We would like to add additional storage to NAS and storage ISO tests.  To do this, we were going to set up a RHEL 5 server, as others on the forum have done and use NFS to provide a data store for ESX.  However, I have some questions that I found only partial answers on the forum.

  (1) is there a performance by adding NAS on the network of IP storage for the existing deployment of VI?  Our EMC SAN uses iSCSI to provide a storage boxes currently.  Mix iSCSI and NFS on the IP storage networking a bad idea to turn performance and stability?  Anyone done this?  Looks like a logical thing to do that many small deployments may not afford to buy company for test/development equipment and storage ISO.

  (2) what are the security implications of placing an NFS server on Red Hat-based IP storage network?  How to do this safely?  All posts of forum and documentation of security seem to focus on the need to separate the traffic of IP storage (which is clear text) to run virtual machines or physical servers.  In order to add the NAS on the network of storage, we allow access to the Red Hat server for IP storage network.

  (3) is there a way to limit the traffic on the network interface facing the storage over IP to NFS network only?  We would be two interfaces on the server Red Hat to fight against it, as our network of IP storage is not returned to the other networks in some way.  It is an isolated network by design, for security reasons.  Thus, we would need an interface connected to the stroage and one IP network that is connected to one of our management systems.

  Thank you.  I appreciate your help.

  James

  Hello

  I can understand a problem of pure load.  What I meant is there at - it a greater load on the servers simply having to use two different storage (NFS and iSCSI) protocols?  Or is it better to use iSCSI on the storage of test/development device so that we only configuring and using a storage Protocol?

  There is some overhead in the vmkernel, but it is also to be expected.

  I think that it is at the heart of the case.  I don't use a full OS is the way to go for me.  I'm really a Windows administrator and my knowledge of Red Hat is somewhat lacking.  On this basis, it may be preferable to use a storage OS like Openfiler or NexentaStor.  Do you have an opinion on which one is more stable or efficient?

  Openfiler is Linux or FreeBSD. I still have to examine in detail, but in both cases, they are both complete BONES. Openfiler is much easier to use, however, and will be iSCSI or NFS. If it were me, and I didn't know anything about Linux, I'd use Openfiler.

  VMs allows access to the storage indirectly however ESX.

  Great, so he can participate in your existing IP storage network.  Configure web access (management) to Openfiler being on the same network as for existing SAN management application. Then have your data on the IP storage network.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

  Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links

• Questions about adding a Skype number

  First timer here, here are my questions, I live in Thailand, former U.S. citizen, have for years had major problems with government agencies to reach me by phone. My billing address is in CA, my verified phone number is thai. I believe that with a Skype CA phone number I can eliminate these problems, correct? As the Government agencies and US automated banking systems cannot recognize a 11 digit number.

  OK, so I did not have a first core of Galaxy attached to any diet, talk with a slot for sim card available. My intention is to buy a prepay sim for the available location local, and then add a Skype number. This Skype number wouldn't be usable wifi connected. A one year subscription is $52.25, but the site says nothing about other calling some how fees, or I've missed?

  With the second sim with a Skype number, dedicated to the United States calls only, and I was able to differentiate between the two by which the sim was used to receive the call. I receive a message if a call was made for me if it is not connected to wifi?

  Could I have the call transferred to my Thai number, if I were to buy call forwarding also?

  I intend to wait until I have answers from the community before I do anything.

  Thanks in advance for those who add their comments.

  Hi, what you're trying to do is possible in principle, but you do not add the number of Skype to a SIM.

  What happens, is that you install the Skype app on Google Store on your base premium Galaxy then receive calls and outgoing calls via the Skype in wifi or mobile data, if you add a local SIM card.

  Check Skype calling subscriptions and distribution rates to the United States and the Thailand (subscriptions especially if you make a lot of calls or transfer calls to a number of Thai). If you buy a subscription or even 2 subscriptions (1 USA and 1 Thai) then you get a 50% discount when you buy a Skype number for 12 months, which is a good deal.

  The application on your Galaxy will inform you of all the missed calls. I suggest you only install Skype on a PC too to see the full selection of purchase options in Tools/Options. You must configure the voicemail here and select this option to allow anyone to call your Skype number. Spend some time looking at all the options that are available to you.

  You can transfer your Skype CA number to a number of Thai, if you wish and have a subscription or a credit to pay for it.

  Perhaps start by installing Skype on your base premium Galaxy from the game store, sign in with your account and take a look at all the parameters available on the app. Setting most are in the app now except setting up voicemail that can be made on the program Skype on a PC.

• General question about adding storage Readynas 204

  I have Readynas204 on x-raid with three discs of 3 TB sends me some 5.45 TB of storage. Yesterday I added another 3 TB and readynas recognized without any problems but the storage size has not changed. I installed the new drive straight out of the box and I don't think that it should reformat because the drive status is green and the 'Format' button is grayed. The State is green, but that is to say the reconstruction of the volume. My question is I am suppsed to see the storage of 8,38 to size once the volume rebuild process is finished? or I suppsed to see increased storage size rightaway after adding the 4th disc? Thought I should ask this here first before submitting a ticket. Thank you

  You should see the larger size when the rebuild is complete.

• Question about providing version bundle another language

  My application was approved for release. now that I want to offer a separate for another release, can I create new product? or do I have to create new package under the current product.

  My application uses dynamic licensing mode,

  Q1:

  If I create new bundle under current product, appworld will send to my link to applyLicense with the same product name?

  Q2:

  If I create new bundle under current product, the user will have the choice to download the Language Pack? given that these are differet BAR files

  Please help me about this

  Why not throw in English (if that is set on the device and the user must be able to read English) then have an option or by setting the section where the language can be changed? It is thus the most multilingual applications I used work and it does not degrade the user experience.

• HP Presario CQ60-211DX: Question about adding ram

  My moms HD took a dump and I'll replace it and update the ram.  After defining and entry model information site, she came back with a couple different options.  He says that I can use PC2-5300 or PC2-6400.  The PC processor is a Celeron 585 2.6 single core with a 667 Mhz FB.  As I understand it, requires PC2-5300 667 Mhz FSB of the processor?  (This is what I guess I)  PC2-6400 runs at 800 Mhz FSB?  I just think?  And what advantage would I using the PC2-6400 on the 5300 with my current set in place?  He said that the two are compatible and they are at the same price.  Help, please.

  Thank you

  Ricky Brown

  Your a chipset GL40, which culminates in the DDR2-667. Also known under the name of PC2-5300 (same thing). So you can install DDR2-800, but it will run at the same speed that is 667 mhz DDR2-667. If they are both the same price get the DDR2-667. DDR2-800 is generally a bit more available and a little less money, believe it or not, but apparently not where you found it.

• ICS Question about adding Widget on the home page main

  How to add a widget to the home screen? I have a battery widget that I want to add, but if I press and hold the home page I get are all options for wallpapers?

  I had this issue also. I had to uninstall and reinstall the application that it appeared later.

• Question about adding additional disks with voting rights (AIX cluster)

  I maintain a database cluster Oracle 10 g RAC running on AIX servers and I would like to add another disk to vote. I intend to use the following, executed command as root: crsctl add css votedisk device_pathname.
  
  This command can be performed while the database and cluster services are active, or do I have to stop both before changing the configuration of the cluster?
  
  Thanks in advance for any help!

  as stated in the doc:

  * "" using the - force option while any cluster node is active can corrupt your configuration. "*"

  MetaLink Note 428681.1 (updated Dec 2008) clearly said that the crs must be stop in 10 g on all nodes before making any changes on the drive to vote

• Questions about Stor.e TV +.

  Does anyone have a contact point to raise a complaint about the lack of service from Toshiba? I spent £160 on a TV + Stor.e and did have some problems with it, as you can see from the few posts that I raised. After spending £160 on a point I don't understand why if the forum is the only option to support what he is no Toshiba engineers on this issue, who are able to answer my questions. I do not expect a 24 / 7 hotline for £160 I spent, but it would be good to know that a Toshiba engineer could answer my questions about their products. Especially since it's the second one I had which suffers from a cosmetic defect, I had to stick to feet about it as the Unit came with 4 pads ride around the box. I also have my doubts about the HDMI because it seems to be very sensitive to any movement in the area, causing the connection to remove.

  I got a Western Digital box media for more than five years and had no problem with this, the only reason why I changed, it was to make use of the connection to the local network, the HDMI connection and the fact it supported more than file formats. FSR this device was abit of a disappointment for me. So if someone could point me in the right direction, I would be very grateful.

  Hello

  I can understand that you are not happy with the current situation and usually if you buy a product it should properly expect and do no problem.

  As you probably already seen here it s a user to only user forum. This means that you can speak with normal people like you and me and there is no official support from Toshiba.

  In your case, it would be best if you contact an authorized service provider or call the Toshiba UK. The phone number, you can find on the site of Toshiba UK Web:
  http://UK.computers.Toshiba-Europe.com

  Just give the guy a call and explain your situation. I'm sure they can give you a detailed answer and if your TV Stor.e + must be repaired or not. When warranty hardware repair is free.

  I hope I could help you a little bit :)

• I want a NEW computer, but I want Windows XP on it. I don't like about adding new fangled to it. I just want to use my OLD stuff. Is this possible?

  I want a NEW computer, but I want Windows XP on it.  I don't like about adding new fangled to it.  I just want to use my OLD stuff.  Is this possible?

  Hello

  If you are considering buying new PCs, you can go ahead and buy Windows 7 Professional, Ultimate or enterprise. These editions of Windows 7 supports Windows XP Mode, where you can use all programs Windows XP. You can also use the Windows compatibility mode to run Windows XP programs in Windows 7. For more information, see:

  Buy Windows 7: main questions

  http://Windows.Microsoft.com/en-us/Windows/shop/buying-Windows-7-top-questions

• Questions about the management of specific nodes in different hierarchies

  Hi all

  I have a question about the specific management of some particular set nodes, which are located in different hierarchies within a same version.

  I want to know if there is any editing made to certain properties of these specific nodes or if the nodes are deleted/moved/edited approval to be triggered for the data manager.

  or should not allow users to edit (adding/moving/deleting/changing property values) or those specific members.

  
  

  According to my understanding of the nodes of domain prevents the removal of nodes, but I don't want my Member prefix/suffix, domain is the only way to prevent the change.

  
  

  
  

  
  

  Thanks and greetings

  Madhu
  

  We have an obligation to not allow a node to remove or deleted without the approval of the admin, so I created a Boolean property AllowDelete is false, which is substitutable, default and is available only in a category of property Admin, for which most of the users do not have access.  Then, I created a validation of PropRemove with an error message that tells the user to contact a user admin to remove or delete the node.  The admin can change the AllowDelete to true, then can either remove himself or to allow the user to do.

• Simple question about Append hint

  ORACLE-BASE - title

  The link above, I have just a basic question about add suspicion...

  How the APPEND Hint affects the performance

  The APPEND tip tells the optimizer to perform an access direct-path insert, which improves the performance of INSERT .. SELECT operations for several reasons:

  • Data are added at the end of the table, instead try to use the free space in the table.
  • Data is written directly to the data files, passing the buffer cache.
  • Referential integrity constraints are ignored.

  I wanted to just understand to what extent is the third correct point

  -----------------

  CREATE TABLE emp
  (
  emp_id a PRIMARY KEY/NUMBER
  emp_name VARCHAR2 (100),
  dept_id NUMBER
  );

  CREATE TABLE dept
  (
  dept_id NUMBER PRIMARY KEY,
  dept_name VARCHAR2 (100)
  );

  ALTER TABLE ADD FOREIGN KEY (Dept_id) emp made REFERENCE to Department (Dept_id);

  
  INSERT / * + append * /.
  IN emp
  Select 1, 'King', 100 from dual;
  
  COMMIT;

  The insert will definitely give an error

  ORA-02291: integrity constraint (SCOTT. SYS_C0013725324) violated - parent not found key

  Am I missing something here?

  See you soon,.

  Manik.

  sqlldr can and does ignore referential integrity / triggers and same uniqueness in a load path direct, insert / * + append * / doesn't - you do not direct path when they (constraints) exist. parallel is always a direct route, if you go in parallel, you add.

  https://asktom.Oracle.com/pls/asktom/f?p=100:11:0:no:P11_QUESTION_ID:1211797200346279484

• Question about subjects, books and tables of contents

  I have a question about the subjects, books and tocs. I have a project that someone else created, and my task is to create a new topic and add it to the table of contents. I created the topic, but when I generate CHM project it does not appear in the table of contents. I tried to update the table of contents. What I think (I guess) could be the problem, is the 'links to the topics', when I see the links to the topics in other areas (old) they seem to have a link to the main book, but the new one is not mine. Could you help me? Thank you!!!

  It seems that you have a manual table of contents page, rather than using the table of contents of CHM.

  The toc.htm topic that you see in your list of topics is probably where you will need to add your new topic.

  If the table of contents was already populated when you inherited the project, I suspect the previous author was using it just to keep track of the topics they had added manually to the topic toc.htm - added the CHM topic in summary you did mark the column of the table of contents in the list of topics like '' Yes. '' then add to the toc.htm manual is not. Hope that makes sense.

  P.S. Just guess that it is installing what I can see in the screenshot. It is quite unusual, so I hope I'm right.

• Consider purchase of Wacom Cintiq 27 HD Touch - Questions about the tactile feature in Photoshop and Lightroom

  I'm considering buying a 27 HD Touch of Wacom Cintiq monitor. I have a few questions about the two programs Adobe and their use of the 'touch' feature - Photoshop CS6 and Lightroom 5.7 running on Windows 7.

  1 problems related to touch a feature in Lightroom and Photoshop CS6 and 5 resolved that you see on the forums of Wacom a year ago?

  2. If so, is there sufficient value gained through the tactile feature in Photoshop CS6 and Lightroom 5 to justify the $500 price difference between the Cintiq 27 HD vs Touch HD? (I realize that this is a subjective question based on the abundance of its cash).

  3. I intend to stay with CS6 as long as possible to avoid a monthly subscription, BUT I wonder if buy the Touch HD can provide additional key features in future releases of these products that do not exist currently. (It is a pie in the kind of sky in question).

  Thank you!

  Kent

  Support for Photoshop Touch is added by CC 2014.2.2.  However as the Pro Intuos Wacom tablets with touch can be used with earlier versions of Photoshop and the Wacom Tablets Configurator can custom features can be used with Photoshop touch tablets.  I use LR but I don't know that the same thing would be true for her. You can configure the setting for many applications. The device driver knows which application its interfacing with and uses the parameter set for each...

  I have disable most of touch when using Photoshop.  The main reason why I have a Tablet is Photoshop Brush tools. Like Eraser, clone stamp, etc, nothing is better then a pen when it come to create the layer mask.  For most programs, I always use a mouse and I use the keyboard, the mouse and the pen with Photoshop...

  I never wanted a Cintig I do not have my hand between my eyes and the work. I'm not an artist.

• A question about external authentication with PHP OCI8 using a portfolio store

  Hello
  

  SQL> SELECT * FROM v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE     11.2.0.1.0     Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  SQL> 

  OS: Linux Fedora Core 17 (x86_64)
  PHP Version: 5.4.14
  Apache version (httpd): Apache/2.2.23 (Fedora) 

  I have a question about OCI8 connection to the Oracle server via portfolio, which I understand is a good practice because we do not have to hard code the users password. I'm trying to read pages 117 and 118 of the book The Underground PHP and Oracle manual online to learn how to set up a portfolio. I proceeded by steps as explained in these two pages (except that at the end I connect, as a normal user, not a privileged user) yet, apparently PHP does not detect the user.
  
  Here's what I write in my script
  

  $connection = 
                  oci_connect 
                      (
                          "training", 
                          "", 
                          "php_ora_usr", 
                          "AL32UTF8"
                      );

  the training is the name of the user that I use in my PHP scripts to connect to the oracle database and the password is mypassword (is not true, just for the purpose of this thread :)) the code above gives me the following error:)

  Warning: oci_connect(): ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 91
  
  Fatal error: Connection step: ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 13

  But if I also provide the password which is,

  $connection = 
                  oci_connect 
                      (
                          "training", 
                          "mypassword", 
                          "php_ora_usr", 
                          "AL32UTF8"
                      );

  Obviously it works, but at the same time, this means that my wallet is not operational.
  
  So I'll write here, step by step, how I did according to the instructions contained in the pages 117 and 118 of the above mentioned book and I would be grateful if you could kindly tell where I made the mistake (s)
  
  The following text was performed under my oracle linux (so the dbagroup)
  
  Step 01:_
  I created and provided the password for the directory of portfolio

  mkstore -wrl /home/oracle/wallet_dir -create

  Step 02:_
  I created an entry for my oracle user that will be used in my PHP scripts to connect to oracle
  user: training
  password: mypassword

  mkstore -wrl "/home/oracle/wallet_dir" -createCredential php_ora_usr training mypassword

  I also checked that the entry was actually created for my user in the portfolio

  $ mkstore -wrl "/home/oracle/wallet_dir" -listCredential
  Oracle Secret Store Tool : Version 11.2.0.1.0 - Production
  Copyright (c) 2004, 2009, Oracle and/or its affiliates. All rights reserved.
  
  Enter wallet password:                
     
  List credential (index: connect_string username)
  1: php_ora_usr training
  $ 

  Step 03:_
  I added the following to my $TNS_ADMIN/tnsnames.ora

  .  .  .
  php_ora_usr = 
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = db02)
      )
    )
  .  .  .

  Step 04_
  I added the following to my $TNS_ADMIN/sqlnet.ora

  # sqlnet.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
  # Generated by Oracle configuration tools.
  
  NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
  
  ADR_BASE = /u01/app/oracle
  
  WALLET_LOCATION =
      (SOURCE =
          (METHOD = FILE)
          (METHOD_DATA =
              (DIRECTORY = /home/oracle/wallet_dir)
          )
      )
  SQLNET.WALLET_OVERRIDE = TRUE
  SSL_CLIENT_AUTHENTICATION = FALSE
  SSL_VERSION = 0

  _ Step 05
  The TNS_ADMIN environment variable is already set correctly in * / etc/sysconfig/httpd * so I didn't need to do something for this step
  
  
  Step 06_
  I gave to access Apache (as root) in the directory of portfolio (in fact, it seems that the user oracle (dba) of linux also has the required privileges to grant this access to the apache)

  # setfacl -m u:apache:rx /home/oracle/wallet_dir
  # setfacl -m u:apache:r /home/oracle/wallet_dir/{cwallet.sso,ewallet.p12}

  Step 07_
  Restart Apache

  # service httpd restart

  Step 08_
  Finally make a test connection using the connection string php_ora_usr which the entry was created earlier. And the test was not successful, as indicated above

  $connection = 
                  oci_connect 
                      (
                          "training", 
                          "", 
                          "php_ora_usr", 
                          "AL32UTF8"
                      );

  The error message:
  

  Warning: oci_connect(): ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 91
  
  Fatal error: Connection step: ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 13

  I would appreciate it if you could kindly shed some light.
  
  Thanks in advance,
  Dariyoosh

  That gives a good clue to begin with. With your platform/Apache/DB, you might need different ACLs. Test directory and permissions. Check what euid your Apache runs as. Good luck.