Question design and update

Similar Questions

• CS6 design and update Web Premium question

  Hello - I had to reinstall the rest of the CD, and I have problems with the update. Adobe Update Manager does not work and when I click on updates of the PS, for example, I found a message that says I need to install creative cloud. I did and my installed version is not recognized as I am presented with options for stuff on subscription only, which I have interest no one in fact.  Is the Manager of obsolete original update now and if so, how can I manually update my CS installation to the latest version please?

  Thank you

  Lyle

  My problem is solved... Soft, but good enough.

  I restored from a backup.  I'm always invited by Adobe Application Manager for an update required , which I finished.  This time however, I didn't sign with my code to identify Adobe as mentioned in the initial report, this is the point where the update starts looking for facilities creative cloud rather than my Creative Suite applications.

  I am able to update my applications now using the update option in the application itself. Adobe Application Manager continues to insist on finding creative cloud.

  Lyle

• Updated all my applications to CC (2015) - Adobe design and web user license

  I have adobe design and web full version under license. I just upgraded to a new computer laptop and re-installed and updated. I now see an option for "update all my apps to CC (2015)" in the creative cloud desktop application. I don't understand what this option would do to my versions cs6 perpetually under the software license. My question is if I use the "updated all my applications to CC (2015)" would be causing me o update a software subscription model or simply update my existing license applications for new versions of 2015?

  Yes, he's trying to put you in a subscription on the principle of updating your applications.

• General question about the updates and version number

  I have a general question about versions and update.  I'm new on this and am in the deep end of learning I want.

  In vSphere web client, I see the following versions (these are exactly as the seller, he left a few months that I have screenshots in my documentation that match)

  Version - VMware ESXi, 5.1.0 1612806

  Profile - Dell (updated) ESXi - 5.1 - 799733 (A00)

  I am trying to familiarize themselves with the Update Manager and I noticed that there are a lot of patches and updates available.

  Lists of Update Manager 5 patches as "Missing" with Red x but directly above them are a list of patches with green tick indicating that "installed" - it is perhaps obvious, but im guessing 'installed' means really installed when displayed on the screen - there is an update installed, labeled "ESXI 5.1 all the update 2-' would be able to tell that it has been installed by the details of profile/version above?

  I don't think it's a big deal at this stage, but if I install all missing patches and then the details of the version/profile change in summary screen?

  I hope this makes sense.

  Thank you

  This article allows to correlate the updated version: products VMware correlating build numbers to update levels (1014508)

• I have to ios9.3.3 a 6s and updated iPhone and cannot retrieve old messages

  I have a 6 s iphone and updated to 9.3.3 iOS and now cannot retrieve old messages. I receive mail. I have not updated my ipad and can't receive old emails on this bequest is

  It is a POP email account? Have you set up things so that the device stores messages on the server for a certain period or until you remove them? If this isn't the case, message may have been deleted once delivered, so cannot be delivered again. See get help if you have any questions using a POP with multiple devices - Apple Support email account.

  TT2

• Person to contact Toshiba regarding the design and engineering of ideas

  Hello

  I want to contact toshiba to open a company speak with new ideas about the design and operation of laptops.
  I have pictures and images of these ideas.

  Can someone direct me to the right direction?
  Thank you.

  If you prefer please email me directly: [email protected]

  Hello

  First of all, I must say here it s only forum user. You'll be a really lucky guy if someone from Toshiba will be the response to your ad or the means will contact you directly but hope dies last. ;)

  Are you from Europe?
  In any case, I think the best thing is if contact you Toshiba local basis in your country. But the question is if you can contact the guy because normally your interlocutor is a rather authorized Toshiba service provider.

  Of course, you can try it and look for an email address. Maybe you'll find something on Toshiba page in your language. :)

• Satellite L30 - question video card update

  Hey guys!

  I have a Toshiba Satellite L30-113 and I am very happy with the way it looks and works. I managed to update the 3 GB RAM, the processor is in a pretty good shape, although it is only 1.7 GHz.

  Now, my only problem is that the video card, the laptop is equipped with (ATI Radeon XPRESS 200 M) is quite low. You have an idea on which other (preferably better) video cards is compatible with the Satellite L30 - 113 default installation?

  Thank you!

  Speaking of GPU Generly cannot be upgraded on laptops. Due to the specific design and cooling with limited cooling performance, it cannot be done.

  Check please - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

• Yes... another question Win10x64 and iTunes (anyone listening...?)

  Googling... youtubing... reading the forums... Yes, actually it.  Even talked to some of our Windows 10 software engineers today to see if they might know... a few suggestions but nothing in Device Manager is hit so... here we go again from the top.

  ITunes sees the iPod but can not know what it is.  It does not list properly.

  A ran the diagnostics for connectivity, and it presents the problem

  Microsoft Windows 10.0 x 64 Home Premium Edition (Build 9200)

  Dell Inc., XPS 8900

  iTunes 12.3.2.35

  QuickTime is not available

  FairPlay 2.9.13

  Apple Application Support 4.1.2

  iPod Updater library 12.0

  Apple Mobile Device 9.1.0.6

  Apple Mobile Device Driver not found.

  Hello 3.1.0.1 (333.18)

  Gracenote SDK 3.06.1.3084

  Gracenote MusicID 3.06.1.3084

  Gracenote submit 3.06.1.3084

  Gracenote DSP 3.06.1.3084

  Connectivity device tests *.

  iPodService 12.3.2.35 (x 64) is running.

  iTunesHelper is not currently running.

  Service Apple Mobile Device Service 3.3.0.0 is running.

  No controller Serial Bus universal found.

  No FireWire (IEEE 1394) host controller found.

  Curious about the no controller found USB... dunno if that designated endpoint or the root.

  So I'll and load the driver by hand in C:\Program Files\Common Apple Mobile Device Support\Drivers where lives usaapl64.

  The VID and PID are o5ac/1266 and look in the driver configuration file, of course that is listed so... this driver supports the device

  So I'll and and update the driver for the ipod and navigate to the location of the driver above

  And I get an error indicating that the file does not have a compatible driver for the device.  Really... its in the list.

  The real problem seems that iTunes is not find USB controllers.  Though even the iPod is not connected, it MUST list the controllers.  But this isn't, is so logical that it does not find the iPod.  This is proved by running the same test on my win7 box, and of course it lists the USB controllers

  When to reinstall iTunes, right-click on the downloaded Setup and use run as administrator.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Drag point MCLB and update a particular cell of an another MCLB

  I am a very new LabVIEW Developer who has worked on a feature to implement the ability to move an element from one MCLB to another and update a particular cell (depending on where you drag the element) with the information contained in the trail. I was able to get a very gross put solution implemented and it illustrates my problem and the solution very well.

  I was unable to find any other way to do it, if it causes a question now to continue adding features for drag and drop interactions. As an example would be eager to reorganize the data of one of the MCLB.

  There are some problems with this implementation, if it works apparently to provide drag I want. However, it must be a better way to do it by programming, should not rely on "hard-coded" values

  Hi nsecrist,

  the structure of your event with the events dragging blocks an original feature of MCLB to move and copy lines. Please find attached the modification of your code. I used the double click event to slide instead of the event and the value stored in the string 'element '. If you double-click MCLB, the value of the cell to copy to 'element' and if you double click with the 'Shift' key, value of 'element' copy to the cell of MCLB. I know that's not as simple as drag and drop, but I hope this helps you.

  Best regards

  CaravagGIO

• How to make my waveform in the simulation design and control work continuously?

  Hi all, I m a begineer to Labview and have a few question.

  I use the Labview to design and implement a controller for FOPTD system, but I found that the waveform in the 'loop control and simulation"does not work continuously. I mean keep repeating in the same graph from 0 to 10 seconds. Is there an approach to make it run continuously?

  Thank you very much.

  Whenever a loop Control Design and Simulation is executed, it connects a full simulation, the initial time for the last time. When you drop a new loop CD & Sim down, the default values are zero second initial time and 10 seconds for the last time. I guess what you probably want is for simulation do not stop at 10 seconds. Double-click the left node attached to the CD & Sim loop and extend the end time. You can change the end of 'Inf' time if you want it to run until the VI is stopped.

• There is no tools in the control design and simulation its Blanck

  There are no tools in control design and simulation its Blanck. I saw the same question asked before and found a solution that, if we install 32-bit labview then all options will be available. I installed labview of 32 bits, but the result is the same. Please help me thanks in advance...

  So yes, I think that it is possible to use this tool as a trial.

  but you have to install after installing LabVIEW.

• Control Design and Simulation Tutorial

  Hello

  I begin with a course that requires the use of the Control Design and Simulation functions. Before asking stupid questions, I want to see the hand on the tutorial, it is referenced in this white paper.

  http://www.NI.com/white-paper/5855/en/

  However the link to the tutorial ftp does not work, someone else has an alternative link, or could buy the tutorial directly.

  I appreciate any assistance.

  Kind regards

  Danny

  Try again... Earlier, I was able to download the zipped file

• Time of design and of the dynamically created controls

  I have a project written in VC6 as a project of the MFC dialog box. In a particular area, I dynamically create several (the exact number depends on user input) CNiGraphs. There is also a two CNiButtons that were created at design time using the resource editor. The problem I have is that when this dialog box is open, a message appears saying it is an eval version and the control will go off after 5 minutes. After 5 minutes of waiting, the CNiButtons 2 go inactive (black tower), but the continuous CNiGraphs of work. I have a valid license of MStudio 8.1.6, version but it seems that these 2 buttons do not recognize the license. There are also other buttons from the moment of conception of the project, but these have no problem at all. When you create the dynamic creation of the CNiGraphs, give them a valid license string, and I was wondering if there is a problem with the time created and dynamically controls created in the same dialog box to design. Anyone know?

  I don't remember, but I can have created these 2 CNiButtons when I was with only an eval license. (All others were undoubtedly create when I got a full license) Could have an impact on them? I have a vague memory of reading somewhere that DTC create controls to check the license when they are created in the designer and store that info in them license. If this is the case does anyone know an easy way to update the license stored in control? I rather not just delete it and Add again because I would avoid having to redo the tab order (unless someone knows how to easily insert something in the middle of the order of tab instead of having to click through all the controls in the correct order)?

  In addition, I don't know if this would affect anything, but the project was originally built with ComponentWorks 1.0, we were forced to move to MStudio when we met a few bugs in CW, so all controls were originally CW controls which have been converted into control of CNi. I doubt that this is so like everywhere else, we changed during controls is not a problem, but I'm ready to try the suggestions.

  Hi JC,.

  I hope you had a good weekend!  I'm glad to hear that you're back running.  Add the extra button was, in fact, causing update the licensing information for the other buttons, as you can imagine.  After further research, I found that the license information are stored only the form of the control, and if this control doesn't change in any way (or in your case, adding a new project), he sees no reason when compiling to recreate a link to the license.  However, after the change of control and a new, it updates the link between the license information, which solved this problem in your case.

  I hope this helps, JC.  Have a great day!

• Impossible to replace and update a file in the client computers through Group Policy preferences

  Hello

  I am unable to replace and update a file in the client computers through Group Policy preferences.

  For example,.

  I am trying to replace and update a custom calendar file (c:\Program Files\Microsoft Office\Office12\1033\outlook.hol)to client computers through Group Policy ptreferences (political group: computer configuration\group policy setting \file preference\windows).) But it is not updated and replaced in client computers.

  Could you please help me on this?

  THnaks

  Srinivasan

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:

  http://social.technet.Microsoft.com/forums/en/winserverGP/threads

• Is it possible to reset the date of the last virus and update the spyware definitions in XP?

  I have xpsp3.  I was looking at my calendar to find out what day of the week, an event that happens in November, and unfortunately I forgot to go back to the date of the day before I have updated the definitions of viruses and spyware on MSE.  Now, MSE think my latest definitions of viruses and spyware are obsolete, because they were supposed to be updated three months from now.  So my question is: is it possible to reset the date of the last virus and update the spyware definitions in XP?

  Correct the date on your computer. Remove the antivirus/malware product and reinstall.

  -OR-

  To restore before the update, use the system restore. Make sure the date is correct. Update.

  Tom Ferguson