Question of the remote listener

Similar Questions

• Configure the remote listener

  We have a knot of Oracle 11.2 three CARS and want to configure lisenter remote parameter in the init file. When look at the document (Oracle® database reference 11g Release 2 (11.2) E10820-03), the parameter LISTENER DISTANT, it reads

  Syntax REMOTE_LISTENER = network_name
  
  REMOTE_LISTENER specifies a network name that resolves to an address or address
  list of Oracle Net remote listeners (that is, listeners that are not running on the same
  machine as this instance). The address or address list is specified in the
  TNSNAMES.ORA file or other address repository as configured for your system.

  This confuses me
  (1) what is this "network_name? What name of the listener or servce net?
  (2) could he understand that REMOTE_LISTERNER is the name of a listener (or a list of names of all listeners) who are not currently running on the machine of the instance, and listening to the addresses listed in the local tnsnames file. Or simply the listeners on the other two nodes tuned for instances on two other nodes?
  
  Thank you

  No worries mate,
  Reading this, I hope it would be useful

  http://www.Oracle.com/technology/products/database/clustering/PDF/scan.PDF

• Satellite A300/Y01 - Question on the remote control

  There is a remote that comes with the A300/Y01 (http://asia.cnet.com/cnet/i/r/2008/nb/43187224/sc004.jpg).
  I want to know if I have a USB infrared for my A300/U01 Sat.

  And buy a Toshiba remote that's going to work?

  And where can I buy this remote control Toshiba?

  Hello

  To be honest I don't think you can buy it separately. As much I know this remote control is not available as a separate option.

• Remote listening port

  Hi all
  
  I have oracle 11g rac ASM in RHEL5
  I have 2 nodes
  node 1 VIP 115
  node 2 VIP 116
  for each of these nodes, I local listened as oracle said, I also have remote listener
  witch is listen to these two nodes and do the load balancing and my remote interlocutor is set to SCAN ip like oracle
  
  My question is:
  the remote listener is resident in what node because I found the listener even also reside remotely in nodes 1 and 2
  When the connection is came to the listener (distance) of the database is also detect that new connection is coming and then
  to see which node is have less load and pass this connection to the local listening port, so I need to know the remote listener
  reside in the nodes 1 and 2 or... I don't know?
  
  
  Thank you very much

  crsctl State resource t
  This will show you the current locations of all resources, including your listeners SCAN.

• How to prevent the registry REMOTE LISTENING on SCAN LISTENER

  Hi all
  
  Oracle 11.2.0.3 database
  
  How to prevent remote recording on SCAN listener?
  I need to know if there is a way to prevent a grid of the proceeding on the listener by using the parameter remote_listener without affecting the incoming client connection.
  
  These setting below is not sufficient to meet my tests:

  tcp.validnode_checking = YES
  tcp.excluded_nodes = {list of IP addresses}
  tcp.invited_nodes = {list of IP addresses}

  The parameters tcp.excluded_nodes and tcp.invited_nodes deny and activate specific IP addresses client to make connections to the Oracle listening port.
  
  
  Levi Pereira

  Hi all

  MarkusM give me a wonderful solution:

  * The use of the secure Transport class (COST) to restrict the Instance of record with SCAN listeners [1340831.1 ID] *.

  CVE-2012-1675 Oracle security alert # added
  http://www.Oracle.com/technetwork/topics/security/alert-CVE-2012-1675-1608180.html

  I hope this helps others.

  Kind regards
  Levi Pereira

  Published by: Levi Pereira on May 7, 2012 14:37

• Qosmio F20-132: Question on the use of the remote control

  Hi ppl, I just read the manual of my laptop and I realized something that I didn't realize before

  I can use my remote control without using the "infrared adapter" using the USB connection, but it does not work inside the Win XP MCE, but I can use it to turn on my laptop and off and use other features, I will try in the future to use some other aplications with the remote control. I guess many of you guys realized it when you bought your laptop, but I said at the beginning when I opened the package ' what the hell? remote control... but I really need this adapter? Sherazade, that sucks.

  by the way someone is using the remote control with other applications (such as ahead nero, chis tv, or linux inside)?

  Hello

  I downloaded the manual for this unit, and according to the information of the remote control receiver is required if you want to use the MCE Remote control.

  In addition, remote controls USB only works with Win MCE and so cannot be used directly with Qosmio Player
  Additional some application programs can not supported control functions remotely.

• Question about infrared remote control on the Qosmio F30

  Help me I am new to this, so sorry if I mess up a bit, I am trying to sort, infrared sensor IF my Qosmio F30, I try to use my media remote
  so if anyone can help thank you
  Ian

  Hi mate,

  where´s so the problem? Just put new batteries in your machine and begin to control your computer with the remote control. Your portable computer with an infrared port that communicates with the remote and usually such device is automatically recognized by windows.

  May I ask what operating system do you use? XP or Vista?

  Welcome them

• Question about the use of OdiOSCommand to run remote commands

  Hi all
  
  I have a query on OdiOSCommand
  
  
  I have two following servers.
  A server running and odi agent
  Server B agent running odi - but no a pots to odi - and odiparams.sh set up correctly.
  
  Now I regularly invoke scripts on server B (using startscen.sh) that use the agent on the server. It works fine - once odiparams.sh is correctly set up for standards etc.
  
  Now I have a new scenario that has an order of OdiOSCommand. Yet once again, I invoke the script from Server B, to use the agent on the server. The OdiOSCommand passes just a shell script, and there is no problem of permission.
  I expect the command to execute on the server where the agent is running (e.g., Server A) - but its execution on the server where I invoke the script (IE Server B). I can prove it by temporarily replacing the calling script with a mkdir test_dir schell.
  
  Is it possible in odi to invoke a command on a remote linux server - when the remote server is running an odi agent. I know there are other ways to do this - ssh etc. - but I try to keep this reality to a package of odi of maintainability.
  
  Thanks for the research!

  This thread responds to what you are looking for:
  Re: Startscen using an existing running agent could process

  Basically, startscen.sh branches off to a local agent on server B, and so the script also runs on server B.
  You must use startcmd.sh instead.

• The easy listener questions

  Jin
  
  I have 10g on Windows 2003.
  
  The listener.log file gets reset / regenerated whenever the database is stopped / started?
  
  The size of my listener.log is 740 MB size. Is it very important?
  
  Under Windows, how to create a listener for the second? It is advisable to have a second listener running in case of failure of the other earpiece?
  
  Thank you, John

  user629010 wrote:
  Jin

  I have 10g on Windows 2003.

  The listener.log file gets reset / regenerated whenever the database is stopped / started?

  Any log file is a Mute . There is no intelligence to do any activity as "reset / regenerated" on the power on/off. So the answer is an absolute No.

  The size of my listener.log is 740 MB size. Is it very important?

  Depends on! If you have a size sufficient storage and won't mind a file less than 1 GB, it is not. If you are concerned about your use of the disk and do not want to keep logs of the months and months of old data are, it is great and you must cut out keeping just the data for no more than a week.

  Under Windows, how to create a listener for the second? It is advisable to have a second listener running in case of failure of the other earpiece?

  In general, No . Yet there may be counters as if you want to protect yourself from the failure of the only listener and want to have a failover of the listener , you may want to have a second earpiece. But as already said here in this thread, it is not normally necessary. To create a second listener, just fireup NETCA and create a new one on a different port and it will take care of everything.

  Thank you, John

  HTH
  Aman...

• Ring of the remote control for a updated firmware A77 camera REQUIRED emphasis comments functionality and design?

  Hello
  It is a good complaint and at the same time a good stand on a feature I'd neeeeeed really put in an update of firmware for the camera of the A77 as soon as POSSIBLE (as soon as Possible) like others, I have already asked for what he moooooonths there!
  I have spent the money of the month and time in a machine to control the update in order to focus stacking without touching the camera... It does not give the expected results, but maybe after all, I will succeed.

  But of course, it would look pretty cheap technology around an expensive Sony which does not any Thetering for this device 3 times the price other cameras with this feature, "Thetering", a term which means remote control the camera from a computer or IPod, mobile phone, etc.

  FUNCTIONALITY NECESSARY:

  Everything is necessary at least to do something, would be the ability to reallocate the shutter half pressed the button to advance a specific step. When the focus is narrow, few measures are necessary, but it goes further, steps may be greater. The camera would limit its course to the limits of the focus ring. Once the button out (so not half or completely down) or when the update has reached the limit of development more far, it would be to take a last picture and bring focus back to its position closest to you, ready for the next batch of photo.

  Pictures would be taken when completely down. If the focus is not the position of the closet before splashed the process, we could do it manually or select an option from the menu.

  Another possibility would be to reassing these 2 keys of the remote control features: a to make one step back, one to make a step forward. The advantage of the 2nd button that allows a remote control, would be the possibility of backwards if we went off for a step.

  Overall, it would take very little programming to do this. (mainly add a menu option and the operation of each time button x is pressed, focus moves a step forward, a step being of size proportional to the distance according to a simple formula. Same thing for a button Y in the opposite direction.

  (1) what is the best way to communicate this request to the right people?

  If someone expect this feature too, please comment!

  (2) also, where we communicate comments on design issues?

  Thank you

  Hello Mark,

  Welcome to the community forums of Sony

  Thank you for your comments and feedback for the SLT - A77.  The answer to both questions is, Right Here.

  We are able to pass all your firmware requests and comments and suggestions regarding the product directly to the Digital Imaging Group.

  We can't promise or provide an ETA, however, we listen and as owners of the NEX-7 can attest, we can impliment when we can.

• Question about the flexible reference mode vs mode

  
  Hi, help me to make it clear what mode should I use for my ar test?

  If anyone can answer my questions, it would be useful.

  1. mode of reference

  1.1 reference mode has some standard scenario to make VDI workload. would you share the contents of these scenarios?

  1.2 how the reference mode simulates listening login for users of 400VDI?

  2. flexible mode

  2.1 How can I decide which mode should be used for my test, the remote control mode, the passive mode and local mode?

  in other words, what kind of test cases are recommended for each mode?

  I know remote mode is 1:1 for the client and the desktop computer, passive mode is 1: n and local mode is 0: n.

  2.2 how flexible mode to simulate the time to peak of connection for users of 400VDI?

  Thank you very much.

  Ayako

  1 Yes "remote" mode and specify 400 as the number of workstations. You need 400 clients to connect.

  2. you can see the workload mix on the ViewPlanner UI page. But for the event log, you can only select the 'word'.

  3. There will be a PDF report at the end with all the stats.

• Please help, data queue on the remote server

  Hello Experts,
  
  Kindly help, to learn how to roll up the data from the remote server. I need a detailed procedure to make settings on my local machine to connect to remote Oracle using SQL Server * MORE.
  
  I installed on my local machine which is 32-bit Oracle 11 g Release 2:+.
  
  SQL * more: Production of release 11.2.0.1.0 Fri Feb 8 12:02:30 2013
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  Enter the user name: SYSTEM
  Enter the password:
  
  Connected to:
  Oracle Database 11g Release 11.2.0.1.0 - Production
  
  SQL >
  
  and on a remote server below is the version installed.
  
  Log in as: B_DB1user
  [email protected] password:
  Last login: Sat Feb 7 18:19:35 2013 10.10.167.8
  [B_DB1user@bamdb001 ~] $ sqlplus
  
  SQL * more: version 11.1.0.7.0 - Production Fri Feb 8 12:06:35 2013
  
  Copyright (c) 1982, 2008, Oracle. All rights reserved.
  
  Enter the user name: B_DB1user
  Enter the password:
  
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
  With the partitioning, Real Application Clusters, OLAP, data mining
  and Real Application Testing options
  
  SQL >
  
  ----------------------------------------------------------------------------------------------------------------------------
  That's what I have in tnsnames.ora
  
  tnsnames.ora # Network Configuration file: E:\app\managerproj3\product\11.2.0\dbhome_5\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  LISTENER_ORCL =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  
  
  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl.10.167.8)
  )
  )
  
  ---------------------------------------------------------------------------------------------------------------------------------
  That's what I have in listener.ora
  
  
  listener.ora # Network Configuration file: E:\app\managerproj3\product\11.2.0\dbhome_5\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  AUDITEUR1 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.10.167.8)(PORT = 1521))
  )
  )
  
  ADR_BASE_LISTENER1 = E:\app\managerproj3
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  )
  )
  
  ADR_BASE_LISTENER = E:\app\managerproj3
  
  ------------------------------------------------------------------------------------------------------------------------------------------
  
  
  Database server: ORACLE
  HOSTNAME: BAMDB001
  IP address: 156.1.3.4
  
  
  and here is the script I tried data spool in the local computer using SQL * MORE
  
  set colsep,
  set pagesize 120
  Set trimspool on
  headsep off Set
  set linesize 1000
  
  coil D:\test\myfile.csv
  
  Select table_name, tablespace_name of all_tables;
  
  spool off
  
  It is effective on the local machine... Please help me to get the data from the remote server to the local computer?
  
  Kindly let me know if you need anything whatsoever.
  
  Thanks in advance
  
  Kind regards
  Bosch

  Is not more or less the same question you asked in {message identifier: = 10835497}?

  You must have a user to the remote database and an entry for the remote database in your tnsnames.ora file

  If you have just to coil of database of remote and local database didn't need to be involved:
  Edit your tnsnames.ora and add an entry with the remotedb, the information and you need to have the following information:

  Ip address or the name of the server (BAMDB001?)
  Name of the service (?)
  Port configured for this database. (??)

  Also, you must be sure that the connectivity of your local computer to a remote server is granted (without firewall block).
  Only when you have this information, you can connect to the remote database from your laptop.

  From the Unix server where you connect to the database, you can get the information to be inserted in your local tnsnames.ora by typing:

  tnsping dbname
  

  Of course, you need to replace dbname with the name of your database.
  Another way is to check the remote tnsnames.ora when logged in Unix:

  cat $ORACLE_HOME\network\admin\tnsnames.ora
  

  and check the configuration it.

  Kind regards.
  Al

• How to write a pl/sql procedure that checks the remote db?

  Hi all
  
  I have one criticism PROD remote database I want to check every 10 minutes for its connectivity. If the connection fails then an email and a text Message is sent to me.
  My question is what is the best way to check if the remote database is running?
  
  Can I use sqlplus system/manager@PROD? But sometimes this has taken so long and suspended. I want the best response time?
  
  How can I write a pl/sql procedure control connection? What do something like the ff:
  
  I created a table for my tnsname.ora entries.
  

  cursor is c1 select dbname from tnsnames_tbl;
  begin
      connect system/[email protected];
      print c1.dbname || 'DB Connection OK';
      exception
         when others;
          print c1.dbname || 'DB Connection Not OK';
      end;
  end;

  Something like that?
  
  Thank you
  Kinz

  Not really feasible at the level of PL/SQL.

  The reason is that the greatest strength of TCP's robustness. TCP will try as hard as possible to succeed, before failing. It was designed to still work on the severely damaged or broken communication as a result of nuclear infrastructure. A TCP connection can take up to 15 minutes, maybe even more, before failing. It can be as slow as a turtle-, but he's wearing a hardshell. (unlike the UDP, which is the opposite)

  So if you want to test the TCP connectivity, you must design your own custom code to implement your assumptions about the latency of packets, earthquakes and drops and so on.

  Otherwise, you will need to use a standard TCP socket, set a time limit, try to login - and hope for the best.

  This approach, I have demonstrated in {message identifier: = 10111306}.

  If the TCP test works, it means that the listener is in place. Does not mean that the database itself is in place. Which means then using a database link to be tested. And this in turn can hang due to problems with archive record being stuck, not enough idle servers shared, etc..

• Local listener & remote listener

  Hello
  
  One can tell what is Local_listener Remote_listener, I tried to understand the documents may, but I did not get clear.
  
  Thanks and greetings
  Syed Khalid Ali

  as you can see output on node1

  .
  .
  Service 'jicracdb' has 2 occurrences.
  'Jicracdb1' instance, State LOAN, has 2 managers of this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0 status: ready
  REMOTE SERVER
  (ADDRESS = (PROTOCOL = TCP)(HOST=JICRAC1) (PORT = 1521))< this="" is="" the="" address="" of="" local="">
  "DEDICATED" implemented: 2279 refused: 0 status: ready
  LOCAL SERVER
  'Jicracdb2' instance, State LOAN, has 1 operation for this service...
  Managers:
  "DEDICATED" implemented: 538 refused: 0 status: ready
  REMOTE SERVER
  (ADDRESS = (PROTOCOL = TCP)(HOST=JICRAC2) (PORT = 1521))< this="" is="" the="" address="" of="" remote="">
  .
  .

  as you can see the addresses public hostname (JICRAC1, JICRAC2) and not the VIP (jicrac1-vip, jicrac2-vip).
  This means that, if the listener redirects a client connection to another node, it will use the hostname JICRAC1, instead of jicrac1-vip. While JICRAC1 can not ve can be solved by the customer and therefore received the error ORA-12545.

  I think that it is because you did not explicitly set the local_listener parameter.

  She seems to be the same question in this metalink note:
  RAC connection redirected host/IP error ORA-12545 [ID 364855.1]

  then try to set the local_listener alias correct to refer to the local listener on each node and see if the problem is resolved.

  as for your other question related to the .cs and .srv...
  These are created when you create a database service, as below:

  Service 'ractest' has 2 occurrences.

  services are used to manage the workload in the CARS.
  Please visit the following link to the documentation for more information:
  http://download.Oracle.com/docs/CD/B19306_01/RAC.102/b14197/hafeats.htm

  Best regards
  Moustafa Hassan

• The remote control comes charged out of the box or it must first charged?

  The remote control comes charged out of the box or it must first charged?

  It is usually quite busy, mine was about 85% when he arrived. It's a question about the pre purchase or you have a problem with your remote control works not.