Question on the BONE

Similar Questions

• Reinstall a potential buyer with a question on the BONE

  I plan to buy an Envy 17 in the months to come and had a question about the OS reinstall. Envy allows to boot from a dvd using the method of 'hold down F8' Windows standard to enter the default windows recovery tools and install a clean OS? I intend absolutely wipe the OS preinstalled and starting from scratch in order to remove all the crapware and create my own recovery image using OEM Win 7 dvd I have. To do this, I need to be able to load the operating system without using any built-in recovery console. As a user of long-standing self built desktops, I don't need such tools as I've done it before on my old laptop and this desktop computer. Thanks for your help.

  Yes, the operating system license key is attached at the bottom of the laptop. Before you start the formatting of the hard disk, you can check the recovery options available on the laptop_either by pressing the F10 key to turn on or by starting from the set of the OS Recovery you can burn (recommended, btw). A lot of new portable HP have a minimal 'Install' option that formate and reinstall only the OS and drivers without all the extra stuff that is preloaded.

  http://support.HP.com/US-en/document/c01895783=

• Question about the BONE tool

  Hello

  New here and has recently started to learn Flash CS4.  I'm currently dealing with the BONE tool.  When I choose to do a single animation as an arm, I can animate very well.  When I create a full figure and spread out the bone structure, I come to problems.  When I move the arms, the head expanded with her and stroke and fill the head become severely put-bore.  Y at - there a step I'm missing or what I need to build each part of the body in separate layers?

  Thank you!

  You must use the link (behind the BONE) and "deselect" some of the points that you do not want to be associated with the OS.  This video is very good at explaining: http://tv.adobe.com/watch/flash-downunder/the-bone-tool-and-the-deco-tool

  Good luck!

• Questions about the discs of recovery and partitioning Satellite A200-QH0

  I bought a model of Satellite A200-QH0 in Australia and due to the lack of forums in our country, I would like to ask a few questions here if that's ok.

  The book contains 3 partitions - partition "EISA Configuration" of 1.6 GB, the great partition of the BONE and the recovery partition. So I did the recovery DVD? s using the Recovery Disc Creator tool, as we are not provided with a real disk. But I would like to know what will make these records? My questions:

  1. they really will return that disc hard back to the _exactly_ how he was including the partition layout and software pre-installed?
  2 will be the recovery DVD works even if the disk has been repartioned? I would like to divide the system partition to give space for the files of data etc. But this extra partition will stop the recovery procedure works correctly?

  Please understand that I'm not interested in reformatting the entire disk. I want to just split the partition from the OS. But in case I need to replace the disk in the future or something, I would like to know how to close to 'original', these disks will make me, no matter what I do on the disc?

  Thank you
  Dave

  Hello

  I m not 100% sure how recovery works on the Australian laptops computers Toshiba, but I presume that the restore CD contains the image of Toshiba with the operating system Windows, drivers, tools and utilities.
  I think that if you want to use the recovery CD then the whole HARD drive will be formatted and all partitions will be erased.

  I think that the recovery partition is not created using the recovery CD because the CD of restoration has already been created for the recovery partition is no longer necessary

  Concerning

• Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

  No Option to install repair - SAD

  Hello

  Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

  I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

  As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

  Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

  -Todd w.

  "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

  «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

  As Todd, is the answer.

  "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

  Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

  "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

  It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

  If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

  Another possible place you could make suggestions which could see the developers would be:

  https://connect.Microsoft.com/default.aspx

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A few questions for the first blackberry development

  Hello

  First of all, my apologies for this being placed in the Java section, it seemed, the nearest section of what it is, but please move if need be.

  We have an application in development for the iOS platform that uses some geolocation and Web services.  We believe that we should have a version for the blackberry also platform, so we're looking in this evolution.  However, not being not to developers or users of blackberry, the different options for creating an application are quite overwhelming.  My questions are the following:

  (a) what language (Java?) is the most compatible?  Ideally, we would like to write the backend once, don't have to change the interface for devices of the curve through to the new playbook.  Java is also based on all of these devices?  None of us have any idea of Adobe Air, this is probably out of the question.

  (b) what are the operating systems are supported by what?  The curve I picked up seems to have Blackberry OS5 on it.  All operating systems support Java everything too, and whose support wifi location and cell tower map (the curve does not have a GPS unit).

  (c) I understand that during the development in Java there is a blackberry UI api, that's fine.  However, what version of Java is supported?  Is - this SE6, or we are talking about mobile Java here?

  (d) distribute the Apps.  The Blackberry App World seems to be the best route.  Do most people use?  It seems that the Blackberry is not restricted like iOS devices in how applications can be distributed.  Is there any other App stores (e.g. Amazon for Android?).  I guess it would be silly not not to enumerate the BB App World.

  Thanks in advance, any help is much appreciated.

  S.

  It is a really difficult game of questions.

  (a) Yes is the short answer.

  The long answer involves noting that the PlayBook does not directly support Java, and development platforms only available to this end are currently Adobe Air and Web works.  I can't give you a good explanation, since I dabbled only in them, but in summary,

  (a) with Web works you are essentially creating a Web application using HTML and JavaScript, with some JavaScript interfaces to the native operating system

  (b) air seems to me be in another development environment where screens and treatment are defined in a "Scripting" language that runs on the device.

  Work Web development is possible on the current BlackBerry phones as well, although I have no idea how compatible the two are - in other words how much you would have to change to a PlayBook Web app works works on the Palm and vice versa.

  I suggest you ask a similar question in the forums for these two platforms and see what they say.

  Anyway, there is a train of thought that phones current based Java will stop at some point, and phones will become based QNX, as PB.  So right now, if you want to learn something, then Web works.  But the works Web will be able to do what you want?  I don't know, but I don't know that Java is.

  But whatever the customer, you should be able to write the backend once.  Everything should speak http towards it.

  (b) there is not a BONE by device. Most devices come out with only one level and can be upgraded, usually at the next big release.

  Take a look at this good:

  http://us.BlackBerry.com/developers/choosingtargetos.jsp

  OS 5.0 in theory supports the location of the cell tower.  I say in theory because I never had to work in the United Kingdom.  But I have not tried very hard.  In my view, WiFi is available in the OS 6.0.

  (c) blackBerry support J2ME, with a significant number of extensions.  Think of it as Java 1.4 without all the useful bits, but the then RIM tried to add their useful in bits.

  (d) cannot speak for others, but BB App World is all I use.  Tried another one and didn't get anywhere.  YMMV.

  I hope this helps.

• BlackBerry smartphones my questions on the Storm 2 9520

  Hello everyone I do not have a Blackberry but I intend to update my phone soon and get a (I currently have a Nokia N95 8 GB). I looked through the list of Blackberry models, and the 9520 that I fell in love was the Storm 2 9520. I will probably get one, but I have several questions that I couldn't find clear answers on google. I'm picky about details on a phone, so I want to know everything before get you it. Here is the list of things that I had on my mind:

  -J' read that this phone records videos in 3gp format and not mp4. I'm a little worried about that, because I feel 3gp is less intense than mp4 by Windows (Win 7 user here). For example, 3gp, I filmed with an old phone years ago don't even open correctly in most players and no audio. So, is the format the phone records in playable correctly in Windows (Linux too)?

  -J' I always rename my pictures and my videos after taking. With the 9520, you can click a button or menu entry to rename an image / clip immediately after making it? Or they be saved with a name only automated, and you need to open your file browser and navigate to the file to be renamed?

  -A curiosity, I got on the touch screen if it is based only on the detection of heat or by pressing physics too. What I've seen, the heat detection is used when you lightly touch the screen and select the stuff / drag, while only pressing is used actually click. I'm curious because I could use my phone outside in the winter when I have leather gloves, and the screen can not detect my body energy then. Of course, it is difficult to use any phone with gloves, but I sometimes do to some extent

  -Use the charger micro-usb port, or another port? I know that some devices that use USB for charging and connection to the computer, which is a method that I prefer in general. No problem if it is not, just curious.

  -In the specs of the phone, it says maximum 8 GB micro-SD cards are supported. Someone can confirm that more cards are inconsistent and do not work (16 / 32 GB ones)?

  -J' read on a website that the only way to configure e-mail is to have a Blackberry Enterprise Server (do not exactly know what what). But you need to register with Blackberry using a classic IMAP / POP email account (like gmail or yahoo mail)? And besides, you need to register with any Blackberry service to use 3 G internet supplier or to use messenger (YIM MSN and AIM)? I'm guessing not, but always ask to be sure.

  -J' heard some phones have this limit / problem, so just to be safe: can put you MP3 transferred from your computer as ringtones? Or do you need to download them online from special services, as I heard some phones force you to?

  -J' read on several websites that there are complications with the installation of applications via the data cable. That's how I install most of my programs of others on phones. So if I have a jar or jad file on my desktop, is there no possible to install it via data cable unless I have an additional file with it? Same question for no java Blackberry applications.

  -All Web sites mention that the OS 5 web browser does not support flash on web pages (which I find quite sad). However, I can still play the files flash directly from my phone so I just open the swf file?

  -Can you play audio files in ogg / wav format? In addition, it can play video ogv, avi or mpeg?

  -Can I download themes for it that change the icons and colors of the menus? I guess the definition of custom screen (independent of the subject) shouldn't be a problem. Also, is there a free software that allows you to create your own themes and exporting it to the phone via data cable?

  -Are there also a front-facing camera for 3G video chat?

  -J' read on the differences between the 9520 and 9550 and that the 9550 has a frequency of additional network, sure it can work. Everyone says that you can not use a Blackberry in America if you buy it in Europe, in particular the 9520. Is this true? And the more vital than the 9520 9550 compatibility?

  -OS 6 will come to the 9520 too? Some sites say it won't, while than others whether in devices that it will support an update. Hope very much it will be

  -Finally, this could be a sensitive issue and I don't know how poorly seen on it is here. But it's easy to unlock / debrand the 9520? I would like to get the latest versions of firmware and do not have the limited phone.

  Someone mentioned the provider to branding is not done for commercial reasons, but in order to keep the compatible phone (and shouldn't even be illegal to debrand). So I think it should be ok.

  Yes, they are a lot of questions that may seem ridiculous. I got this phone for several years, so I want to know all about it. Thanks to all those who can help you meet them, and keep up the good work with phones

  Hi and welcome to the Forums!

  Wow! You do your job, I admire that! I'll answer what I can...

  MirceaKitsune wrote:

  -J' read that this phone records videos in 3gp format and not mp4. I'm a little worried about that, because I feel 3gp is less intense than mp4 by Windows (Win 7 user here). For example, 3gp, I filmed with an old phone years ago don't even open correctly in most players and no audio. So, is the format the phone records in playable correctly in Windows (Linux too)?

  3GP is the native video recording format. All you need is the codec on your PC to read. I downloaded a free transcoder and it not only transcode avi (and other formats) for me, but also to put the codec appropriate in what I can play natively without transcoding. QuickTime, I think a codec were also held. There are plenty of audio and the recorded video.

  MirceaKitsune wrote:

  -J' I always rename my pictures and my videos after taking. With the 9520, you can click a button or menu entry to rename an image / clip immediately after making it? Or they be saved with a name only automated, and you need to open your file browser and navigate to the file to be renamed?

  Hmmm... haven't really tried to do... worst case, of course you can rename them later.

  MirceaKitsune wrote:

  -A curiosity, I got on the touch screen if it is based only on the detection of heat or by pressing physics too. What I've seen, the heat detection is used when you lightly touch the screen and select the stuff / drag, while only pressing is used actually click. I'm curious because I could use my phone outside in the winter when I have leather gloves, and the screen can not detect my body energy then. Of course, it is difficult to use any phone with gloves, but I sometimes do to some extent

  In fact, storm BBs use two detection of heat as well as the physical press. It's called SurePress technology. Heat detection determines where on the screen you touch and then physical pressure activates the 'click' somehow. The entire screen is great physical button, whose activity is determined by your finger on the screen position when you press. As such, I doubt it'll work with gloves on at all. I know, on the ski slopes, I remove my glove to do something with my 9550.

  MirceaKitsune wrote:

  -Use the charger micro-usb port, or another port? I know that some devices that use USB for charging and connection to the computer, which is a method that I prefer in general. No problem if it is not, just curious.

  On the BB, a port for all functions. Micro USB for charging and attached USB data transfer. When connected to a PC with the drivers installed, the BB will be time load (from the USB port of the PC) as well as allow the transfer of data.

  MirceaKitsune wrote:

  -In the specs of the phone, it says maximum 8 GB micro-SD cards are supported. Someone can confirm that more cards are inconsistent and do not work (16 / 32 GB ones)?

  Technically, the BB model is unrelated to the size of the SD card, it supports. It is rather a function of the OS level that the BB is running according to the instructions this KB:

  • KB05461 Formats supported by the version of BlackBerry Device Software of card MicroSD

  MirceaKitsune wrote:

  -J' read on a website that the only way to configure e-mail is to have a Blackberry Enterprise Server (do not exactly know what what). But you need to register with Blackberry using a classic IMAP / POP email account (like gmail or yahoo mail)? And besides, you need to register with any Blackberry service to use 3 G internet supplier or to use messenger (YIM MSN and AIM)? I'm guessing not, but always ask to be sure.

  What this site is fake. If you happen to be in a business with BES (or purchase hosted BES) environment, you can indeed have the enhanced features that allow only to BES. But, through BIS (Blackberry Internet Service), you can interface more all connected to the internet e-mail services. See this:

  • http://us.BlackBerry.com/support/blackberry101/Setup.jsp#tab_tab_email

  You mus, t, however, Subscribe to the level of the appropriate of your carrier data plan to activate the true PUSH email function bis.

  • http://www.BlackBerryFAQ.com/index.php/What_do_I_need_a_Data_Plan_for%3F

  MirceaKitsune wrote:

  -J' heard some phones have this limit / problem, so just to be safe: can put you MP3 transferred from your computer as ringtones? Or do you need to download them online from special services, as I heard some phones force you to?

  I've never tried it myself, but I'm sure you can define file types to be ringtones to several media.

  MirceaKitsune wrote:

  -J' read on several websites that there are complications with the installation of applications via the data cable. That's how I install most of my programs of others on phones. So if I have a jar or jad file on my desktop, is there no possible to install it via data cable unless I have an additional file with it? Same question for no java Blackberry applications.

  Applications can be installed via the data cable as long as they meet the necessary criteria to make according to this KB:

  • KB15172 How to install applications using the application loader tool in BlackBerry Desktop Manager

  If you have the .jad file, which can simply be copied on the BB and then executed on the BB to install the application.

  MirceaKitsune wrote:

  -All Web sites mention that the OS 5 web browser does not support flash on web pages (which I find quite sad). However, I can still play the files flash directly from my phone so I just open the swf file?

  Support no BB FLASH at the moment.

  • KB13156 Support for Macromedia Flash for BlackBerry smartphones

  MirceaKitsune wrote:

  -Can you play audio files in ogg / wav format? In addition, it can play video ogv, avi or mpeg?

  You can find all media information of compatibility via this KB:

  • KB05482 Media types supported on the BlackBerry smartphone

  MirceaKitsune wrote:

  -Can I download themes for it that change the icons and colors of the menus? I guess the definition of custom screen (independent of the subject) shouldn't be a problem. Also, is there a free software that allows you to create your own themes and exporting it to the phone via data cable?

  Yes, you can download themes (I have to admit no experience with this...) I found no need to use themes that I need my BB to feature what I need... themes he dressed simply in my humble OPINION). I have no idea on how to create themes.

  MirceaKitsune wrote:

  -Are there also a front-facing camera for 3G video chat?

  N °

  MirceaKitsune wrote:

  -J' read on the differences between the 9520 and 9550 and that the 9550 has a frequency of additional network, sure it can work. Everyone says that you can not use a Blackberry in America if you buy it in Europe, in particular the 9520. Is this true? And the more vital than the 9520 9550 compatibility?

  This issue is not that I consider as responsible. Everyone has their particular circumstances they need to meet. The features of the search machine and the frequency ranges of carriers that you want to run. Then choose the device that fits your specific needs.

  MirceaKitsune wrote:

  -OS 6 will come to the 9520 too? Some sites say it won't, while than others whether in devices that it will support an update. Hope very much it will be

  Without no doubt... but this isn't an authoritative answer. And you will not be able to receive replies by authorities here. Basically, upgraded the specs for OS 6.0 here:

  • http://supportforums.BlackBerry.com/T5/announcements/announcing-BlackBerry-device-software-6-0/TD-p/...

  With the series Storm conspicuous by their absence, I consider any current to be candidates for the OS6.0 storms. But it is indeed in my humble OPINION.

  MirceaKitsune wrote:

  -Finally, this could be a sensitive issue and I don't know how poorly seen on it is here. But it's easy to unlock / debrand the 9520? I would like to get the latest versions of firmware and do not have the limited phone.

  Someone mentioned the provider to branding is not done for commercial reasons, but in order to keep the compatible phone (and shouldn't even be illegal to debrand). So I think it should be ok.

  Hmmm... release information can be found here:

  • http://www.BlackBerryFAQ.com/index.php/How_do_I_unlock_my_BlackBerry%3F

  But I'm not sure of your premises. You seem to be saying that you are locked in your level of update of carriers, as long as your BB is blocked. This is false. Unlocking is simply the function to allow your BB run on a network of different carriers... at the level of the BONE is irrelevant to that. You are free to use the carriers released OS for your specific model BB... There is just a tiny thing that you need to follow. But unlocking is not necessary to do so. There's nothing illegal or anything about unlocking. But it is useless unless and until you want to reverse your BB to another carrier.

  MirceaKitsune wrote:

  Yes, they are a lot of questions that may seem ridiculous. I got this phone for several years, so I want to know all about it. Thanks to all those who can help you meet them, and keep up the good work with phones

  Anything stupid on your questions at all... took a while to write the answers and I regret that I have not all of them for you.

  Good luck and let us know!

• Question about the memory consumed and active

  I have esx4.1 on three dl585 running. I have about 100 active vm running, and I have a small question.

  My vm is all 2008 r2 datacenter and I gave them 1 cpu and 4 GB of ram. When I recover a single virtual machine and look at the summary page, I see the bones of memory consumed host 4075 mb and the active guest memory 81 MB operating system. My question is can I reduce the host cunsumed memory to 2 GB without noticing a difference within the virtual machine?

  It looks like you can.   To be absolutely sure that you'd need monitor assets long enough to have a good idea of what the average is and what are the tops.

• Question about the interruptions and priming

  Hello

  I had a few questions about the startup and interruptions in a virtualized environment

  Assuming that, plenty of virtualization (no material assistance to virtualization of memory ).

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the initialization of the different process, as I understand it takes BIOS-> Expansion ROM - > BIOS-MBR-> other record secondary-> VMM-> OS--> applications >. Am I right on that?

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Thanks in advance

  -SC

  sidc7 wrote:

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the different boot process, if I understand correctly to -> BIOS-> Expansion ROM BIOS-> MBR-> other documents-->--> OS--> requests VMM. Am I right on that?

  It is simplistic but essentially correct.  A metaphor would be a little better thinking that the hypervisor/vmm is an operating system, except that the process on this operating system are requests or comments OSes.  If the BIOS-> OPROM-> BIOS-> MBR-> hypervisor-> init process of the hypervisor-> reviews of fork () s operating systems.  This can become blurred by the design choices (for example Xen/Hyper-V init start a coded parent hard partition that makes hypercalls privileged to fork() guest OSes; ESXi init runs a very limited subset of applications directly on the hypervisor and ESX Classic is somewhere between these approaches).

  There is a subtle distinction between "hypervisor" and "www."  The "hypervisor" is the operating system of single root (e.g. ESX) who interacts directly with the hardware and has access to everything; a hypervisor is not to be used to run virtual machines.  When we talk about a "hypervisor", the tendency is to describe something which is a BONE (although usually a minimal OS designed only to run virtual machines).  The "www" is the layer that allows a virtual machine run: it provides the interposition, virtualization and emulation services and can be plural (for example a vmm by guest operating system).  Architecture of VMware deal with these two separate components, while most other virtualization platforms merge the two.

  sidc7 wrote:

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Strictly speaking, the interruption is not transmitted to a guest operating system - receives the hypervisor (or rather the VMM it transmits to the hypervisor), the hypervisor drivers interpret the interruption (for example reading package of NIC, I/O process of HBA, the timer tick completion), then after a new appropriate break in the guest OS.

• simple question for the first time the user: someone please be a hero

  Forgive the restorative nature of this question but the FM help files are surprisingly usless for the first time and users.

  I did successfully a rectangle graphic.  Now, I want to put some text in the rectangle.  I see that I can't just click on and type.  Apparently I have to, I don't know, do a "framework" of text or something?  I don't see why this is so complicated or why the help docs do not begin at the obvious base.

  Please throw me a bone and wander if this.  I use 9 FM, but I am sure that the version is not serious.

  Thank you!

  There are two possibilities to place text on a chart.

  One is to use the "text tool" in which you can type a string of text whenever you click on the slider.  You can format the string, but you cannot apply a character tag or a paragraph tag. And you can't put a carriage return make several lines; to do this, you need to add the additional lines of text.

  The line of text tool is the letter 'A' that appears in the icons when you consider > toolbars > toolbar graphics.

  Second method is to create a text frame, and then type in it. You can apply paragraph tags, tags of characters, use of CRs and so on in a text frame.

  Text frame tool is the small square with several lines in, just above the "A" icon in the Graphics toolbar.

• Just send a question to the support site that I can NOT connect on my email account after auto update of 38.3.0, cannot connect to my account to check the issue!

  I just posted a question on the last update automatic 38.3.0 it is possible to log into different e-mail accounts in a profile, only the first e-mail account. My support mozilla account is linked to one of the email accounts that I can NOT connect to. Can't connect to this email account to check the issue. Your last 38.3.0 Thunderbird is useless because it is no longer possible to log in different e-mail accounts in a profile, and your support solution is useless because you need to connect to the e-mail account to check the issue.
  How to proceed?

  You can change your email associated with your media profile.
  I have 38.3.0 and I can access all my email accounts I suggest you try the initial tests:

  Start T-bird with disabled modules.
  If it works on your module is to blame and you need to activate one by one.

  Start your operating system in safe mode with active network.
  If it works probably your antivirus is blocking or delaying. (Or driver).

• I forgot the answer to my security question, I tried to update these answers, but to update them also, I must first answers old issue of security which I forgot how can I update and change my security question and the answers?

  I forgot the answer to my security question, I tried to update these answers, but to update them also, I must first answers old issue of security which I forgot how can I update and change my security question and the answers

  ?

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (143315)

• Yes, another question regarding the freezing of Safari - EtreCheck report included

  Yes, another question regarding the freezing of Safari.

  From a little over a month (I think), Safari started freezing regularly whenever I want to open new tabs or switch between tabs. I found myself to leave the program several times per day / hour. I can't identify any specific common cause (other than my MacBook being old) or any new software or updates that might have initiated the question. At first I thought he might have many tabs, I tried to open, but recently it happens even with only a few tabs open.

  I worked through the steps I found in this forum and others: empty the cache, start in safe mode, etc nothing works.

  Based on the previous suggestions, I have downloaded and run EntreReport which I included below. The note and maybe just a distraction, but EntreReport has crashed three times tonight, before he was able to produce the sub report. I ran the report after restarting my system with no other programs running.

  Suggestions are welcome at this stage because I want to start using Chrome or Firefox because I like the transfer procedure between my devices.

  Thank you in advance.

  Ben

  -----------

  EtreCheck version: 2.9.11 (264)

  Report generated 2016-04-28 22:48:58

  Download EtreCheck from https://etrecheck.com

  Time 05:45

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click on the link [check files] help with unknown files.

  Problem: Apps are broken

  Description:

  Safari freeze when opening new tabs / switching between the tabs.

  Hardware Information: ⓘ

  MacBook Pro (15-inch, mid 2009)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro5, 3

  1 2.66 GHz Intel Core 2 Duo CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = battery check - Cycle count = 389

  Video information: ⓘ

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1440 x 900

  NVIDIA GeForce 9600M GT - VRAM: 256 MB

  Software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

  Disc information: ⓘ

  FUJITSU MJA2320BH FFS G1 disk0: (320,07 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 319,21 go-go (54,93 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  HL-DT-ST DVD - RW GS23N)

  USB information: ⓘ

  Built-in ISight from Apple Inc..

  Card reader Apple

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  ~/Library/LaunchAgents/com. GoodShop.updater.plist

  ~/Library/application support/GoodShop/updater

  A unknown file found. [Check files]

  Kernel extensions: ⓘ

  / Library/Application Support/Symantec/virus

  [no charge] com.symantec.kext.SymAPComm (11.1.2f17 - 2015-05-23) [Support]

  / Library/Extensions

  [no charge] expressvpn.tap (20150118 - 2016-04-12) [Support]

  [loading] expressvpn.tun (20150118 - 2016-04-12) [Support]

  / System/Library/Extensions

  [no charge] com.DYMO.usbprinterclassdriver.kext (1.1 - SDK 10.9-2016-04-12) [Support]

  com.Silex.driver.sxuptp [no charge] (1.5.1 - 2016-04-12) [Support]

  com.symantec.kext.internetSecurity [no charge] (1.3.2 - 2016-04-12) [Support]

  com.Symantec.kext.IPS [no charge] (3.2 - 2016-04-12) [Support]

  Startup items: ⓘ

  CMA: path: / Library/StartupItems/cma

  RosettaStoneLtdDaemon: Path: / Library/StartupItems/RosettaStoneLtdDaemon

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 165 tasks Apple

  [operation] 65 tasks Apple

  Launch system demons: ⓘ

  [loaded] 45 tasks Apple

  [loading] 161 tasks Apple

  [operation] 83 tasks Apple

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-04-28) [Support]

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-10-31) [Support]

  [operation] com.epson.Epson_Low_Ink_Reminder.launcher.plist (2015-01-19) [Support]

  [loading] com.epson.esua.launcher.plist (2015-06-29) [Support]

  [operation] com.epson.eventmanager.agent.plist (2014-09-21) [Support]

  [loading] com.google.keystone.agent.plist (2016-03-01) [Support]

  [operation] com.mcafee.menulet.plist (2016-03-23) [Support]

  [operation] com.mcafee.reporter.plist (2016-03-23) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2013-11-14) [Support]

  [operation] com.symantec.uiagent.application.plist (2010-11-16) [Support]

  [operation] com.trusteer.rapport.rapportd.plist (2016-03-19) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2015-10-31) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-10-31) [Support]

  [loading] com.adobe.fpsaud.plist (2016-04-15) [Support]

  com.DYMO.pnpd.plist [no charge] (2014-10-16) [Support]

  [loading] com.expressvpn.tap.plist (2016-01-27) [Support]

  [loading] com.expressvpn.tun.plist (2016-01-27) [Support]

  [loading] com.google.keystone.daemon.plist (2016-03-01) [Support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-04-18) [Support]

  [operation] com.mcafee.cspd.plist (2015-05-08) [Support]

  com.mcafee.ssm.ScanFactory.plist [no charge] (2016-03-16) [Support]

  com.mcafee.ssm.ScanManager.plist [no charge] (2016-03-16) [Support]

  [operation] com.mcafee.virusscan.fmpd.plist (2016-03-22) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2013-11-14) [Support]

  [loading] com.symantec.MissedTasks.plist (2009-11-10) [Support]

  [loading] com.symantec.Sched501 - 1.plist (2014-08-27) [Support]

  [loading] com.symantec.Sched501 - 4.plist (2015-01-08) [Support]

  [loading] com.symantec.Sched501 - 5.plist (2015-01-08) [Support]

  [loading] com.symantec.avscandaemon.plist (2009-10-10) [Support]

  [operation] com.symantec.diskMountNotify.plist (2009-09-14) [Support]

  [loading] com.symantec.navapd.plist (2009-09-14) [Support]

  [loading] com.symantec.navapdaemonsl.plist (2009-11-14) [Support]

  [operation] com.symantec.sharedsettings.plist (2009-07-22) [Support]

  [operation] com.symantec.symSchedDaemon.plist (2009-11-10) [Support]

  [operation] com.symantec.symdaemon.plist (2009-03-27) [Support]

  [operation] com.trusteer.rooks.rooksd.plist (2016-03-19) [Support]

  User launch officers: ⓘ

  com [running]. GoodShop.updater.plist (2013-09-24) [Support]

  [loading] com.adobe.AAM.Updater - 1.0.plist (2015-10-25) [Support]

  [failure] com.facebook.videochat. [entrenched passage] .plist (2014-08-09) [Support]

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-04-25) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Application of Google Reader (Google Drive.app/Applications /)

  Dropbox application (/ Applications/Dropbox.app)

  ExpressVPN application (/ Applications/ExpressVPN.app)

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 4.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Other applications: ⓘ

  [ongoing] com.DYMO.pnpd

  [ongoing] com.getdropbox.dropbox.83552

  [ongoing] com.google.GoogleDrive.81632

  [ongoing] com.macpaw.CleanMyMac3.Menu.80672

  [ongoing] com.mcafee.ssm.ScanManager

  [ongoing] com.mcafee.virusscan.ssm.ScanFactory

  [loading] 420 tasks Apple

  [operation] 193 tasks Apple

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]

  Default browser: 601 - SDK 10.11 (2016-04-18)

  Flip4Mac WMV Plugin: 2.4.4.2 (2012-12-25) [Support]

  DYMO Safari Addin: Unknown - SDK 10.9 (2014-10-26) [Support]

  AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]

  Silverlight: 5.1.30514.0 - SDK 10.6 (2015-09-16) [Support]

  QuickTime Plugin: 7.7.3 (2016-04-12)

  Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  iPhotoPhotocast: 7.0 (2010-11-15)

  AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  SharePointBrowserPlugin: 14.3.0 - SDK 10.6 (2013-02-09) [Support]

  SiteAdvisor: 2.0 - 10.1 SDK (2015-03-30) [Support]

  JavaAppletPlugin: Java 8 updated 77 03 (2016-04-18) check the version of build

  Safari extensions: ⓘ

  AdBlock - BetaFish, Inc. - https://getadblock.com (2016-03-30)

  Add to wishlist Amazon - Amazon.com - http://www.amazon.com/wishlist?ref=cm_wl_saf_ext (2011-07-09)

  GoodShop - GOODSEARCH LLC - http://www.GoodSearch.com (2013-09-24)

  SiteAdvisor - McAfee - http://www.siteadvisor.com (2015-09-28)

  PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2015-07-03)

  3rd party preference panes: ⓘ

  Flash Player (2016-04-15) [Support]

  Flip4Mac WMV (2012-05-15) [Support]

  Growl (2015-09-16) [Support]

  Java (2016-04-18) [Support]

  Norton\nQuickMenu (2010-11-16) [Support]

  Trusteer Endpoint Protection (2016-04-18) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  5% WindowServer

  1% kernel_task

  0% fontd

  0% SymDaemon

  Top of page process of memory: ⓘ

  445 MB kernel_task

  Mdworker (18) 430 MB

  164 MB Google Reader

  Dropbox 123 MB

  VShieldScanner (4) 66 MB

  Virtual memory information: ⓘ

  106 MB free RAM

  4.15 GB used RAM (770 MB cache)

  6 MB used Swap

  Diagnostic information: ⓘ

  April 28, 2016, 22:42:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-224212_[redacted].crash

  com.etresoft.EtreCheck - /Applications/EtreCheck.app/Contents/MacOS/EtreCheck

  28 April 2016, 22:21:42 self-test - spent

  April 28, 2016, 19:49:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194912_[redacted].crash

  April 28, 2016, 19:47:10 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194710_[redacted].crash

  April 28, 2016, 19:38:58 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-193858_[redacted].crash

  April 28, 2016, 19:04:58 ~/Library/Logs/DiagnosticReports/rapportd_2016-04-28-190458_[redacted].crash

  /Library/rapport/*/rapportd.app/Contents/MacOS/rapportd

  April 28, 2016, 06:06:59 /Library/Logs/DiagnosticReports/Safari_2016-04-28-060659_[redacted].hang

  /Applications/Safari.app/Contents/MacOS/Safari

  April 28, 2016, 12:48:04 AM /Library/Logs/DiagnosticReports/SubmitDiagInfo_2016-04-28-004804_[redacted].cpu _resource.diag [details]

  / System/Library/CoreServices/SubmitDiagInfo

  April 27, 2016, 22:01:10 /Library/Logs/DiagnosticReports/Safari_2016-04-27-220110_[redacted].hang

  April 27, 2016, 21:57:37 /Library/Logs/DiagnosticReports/Safari_2016-04-27-215737_[redacted].hang

  April 27, 2016, 19:05:50 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-27-190550_[redacted].crash

  April 27, 2016, 06:57:28 ~/Library/Logs/DiagnosticReports/Airmail 2_2016-04-27-065728_ .crash [deleted]

  / Applications/Airmail 2.app/Contents/MacOS/Airmail 2

  26 April 2016, 19:48:11 /Library/Logs/DiagnosticReports/Safari_2016-04-26-194811_[redacted].hang

  Remove all apps viruses you have

  Symantec, McAfee, Norton...

  CleanMyMac3

• Question for the geniuses of pictures only.

  Question for the geniuses of pictures only.

  You see, I started with iPhoto and later began to use Aperture.  With iPhoto and Aperture, you can have ALL the metadata below the thumbnails, (nice).  Well, I put all my images descriptions in the keywords section because it didn't really matter, because these programs could show them as thumbnails.

  Now, I use this wonderful program of Photos and I found out that it will ONLY show the title of"the image in the thumbnails.  I've got on 30 000 images with keywords but no title.  I want to move / copy the text in the keywords section in the section of the title. I'm not a computer scientist, I guess that my skills are in average.  But I can follow directions.

  Suggestions appreciated.

  Member of ASC compiled some useful on Photos AppleScripts. Maybe one of them will be sufficiently close to your needs.

  http://www.oldtoadstutorials.NET/no.P01.html

• Why my question to the assistance it has apparently been removed?

  It is a complaint.

  I posted a very detailed question on my problem, need help.

  I understand that, since he is apparently a forum volunteer supported, I must be patient in waiting for a response. No problem.

  I posted my question end Sunday, January 29. Now I can't find it. I found and verification of responses every day, but now we have gone (deleted?).

  To say the least, this has not been a very positive experience.

  Any suggestions? My original message can be recovered?

  Find your questions and your answers to the questions asked by other users

  1. Log on to the forum ( https://support.mozilla.org/en-US/questions/ ) with your username and password (click on "Sign In" in the top right of the page)
  2. Once the forum page reloads, click on "My Contributions" in the line just above the first question (which lists your questions and your answers to the other questions)
  3. to return to a list of questions about the forum, click on 'All' in the line just above the first question

  Your question 2 days ago is > here-> https://support.mozilla.org/en-US/questions/916200?s= & r = 1 & e = sph & as = s

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox