qx100 will not reconnect to the phone I want to use my goal.

Similar Questions

• My kodakESP5 will not print all the object I want to print only a part of it

  My kodak ESP5 will not print all the object I want to print only a part of it

  Hi jakenny,

  You may need to replace an ink or toner cartridge. Check the status information in the queue for low ink or toner messages. If the printer has a status or display area, you can also check for low ink or toner messages on the printer itself. For more information, see change an ink or toner cartridge and view the print queue.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  See the link below and check the print settings.

  Choose printing options

  http://Windows.Microsoft.com/en-us/Windows-Vista/choosing-print-options

  Method 2:

  Try to update the printer driver which might help you resolve the issue.

  Click on the link below for more information on the updated printer drivers.

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Check whether the problem is resolved.

  For more information, please see the link below.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• I have an iphone 5 s. I switched from Verizon to the blank cell service, now I want to switch to cellular consumption. But the CC sim card will not work because the phone is "locked." What to do, who to contact without hose of my phone?

  How to unlock iphone 5s so that I can pass the cell phone service?

  Start by contacting AppleCare to determine the true state of the phone lock. No Verizon iPhone since the 4 was sold in a locked state. Thus, unless Virgin did something to the phone, he should be unblocked. Apple will be able to tell you if the phone is locked in fact and, if so, what kind of society.

• Hey everybody!  I'm at your mercy!  Desktop version will not redirect to the phone application.

  Ok.   I am tired.  I designed a site www.aliciastecklercounseling.com for the first time in MUSE.  For the design of the phone, I have designed a temporary site only give vital information on how to contact her.  Stayed up to design the site, worked all night all day and wham! Load the new site!  Wow!  A impressed.  NOT!  On my iPhone it says "Under Construction".  Not even the temporary site, I put in place.  I spent the last 4 hours trying to find out what is happening.  I missed something?  I went to my hosting site and verified the files.  First of all, I saw that there was only one "/ page template" which registered as a template.  Really?  Then I went to the phone file and he also says tpl after each file name.  After texting their CAT that they finally did answer, I ended up deleting all my files and started from scratch.  Now, all the files of the phone have a .php extension.  I don't know if it is correct or not. After you delete all my files on the server, I loaded the entire site again.  I see it on the desktop but the phone says again: "under construction" and not with the temporary file, I did.  Help!  I have too much time and can't take an another non-sommeil night.  I can't load on the phone.  Worked well for the temporary file.  I don't know if that he screwed up, but I have added a menu accordion and went to the properties of the page and added new meta data, keywords and a url for Google Analytics.  Am I supposed to do?  In "Properties of Site", I made the redirect "at the Office" has been selected.  On my server, I noticed that my phone folder there are two folders - css and page templates. When I click on my page templates folder it shows my files.  But - as an extension of .tpl.  I think that it could mess me up.  I have them all.  I am lost and don't know what to do.  My client is not happy thinking I don't know what I'm doing - which is true and I hate to admit it.  With the new Dreamweaver, I need to know too much and am too tired to go learn the code right now.  I don't know if it's the problem of server, my problem or the problem of Adobe software.  If anyone has any ideas please let me know as soon as POSSIBLE!  I searched the internet for the last two hours and had a 'Chat' with my hosting site.  I can never get a human being on the phone.  Again, the site I'm trying is www.aliciasteklercounseling.com.  Nothing complicated.  Mainly just info.  Thanks, thanks, thanks for anyone who could help me.  I am desperate and extremely tired.

  I finally got the version of phone to work.  I have not designed a site for the Tablet - only phone and office.  I guess it would help if I have an iPad as well as to consult different size screens.  At least something now appears. Thanks for responding.

• Texts and iMessages will not proceed with the phone turned OFF.

  I use SMS transfer so that the texts and iMessages seem to come from my phone, even when envoys from my work phone. I found some messages to pass only if the phone is turned on. Is this normal?

  For iMessages, it depends on how Message is implemented on every phone and that addresses each has in common. For SMS, yes that would be normal. Without being routed to the second phone in the first, there are no way an SMS could pass delivery addresses.

• Re: Satellite T110-107 will not start in the form of recovery option using the f8 key.

  I tried several times and can't get the option of recovering your system by typing intermittently the * key f8 during the startup * as it says in the manual, it will just directly in Windows. I just installed the latest version of the BIOS, but that did not help either. I have no recovery discs, but I would get the f8 problem solved in any case. Everything else works perfectly. Thank you.

  Hello

  Maybe you didn t press F8 in the right way
  You must press F8 immediately after the laptop has been powered!
  Press several times to be sure 100%

  If this does not work, create the recovery disk! This should be done first before you do anything with the laptop!
  The recovery disk is always important and useful if something goes wrong with the HARD drive!

  After you create the recovery disk using this drive to put the laptop in the same State as on the first day of purchase

• Windows 7 will not reconnect to the network wireless after the first connection.

  Hi, we have computers portable windows 7 on a corporate domain which primarily use a desktop lan connection. We have a user based certificate that is registered automatically through Group Policy, to allow wireless access, and another group strategy that puts in place the wireless itself.

  The question we have is: LAN/WLAN switch is enabled in the BIOS.

  User can start and open a session with or without the LAN cable and wireless connections automatically connects them (if no LAN cable not inserted) wireless access point

  Once connected (if started with inserted LAN cable), when the LAN cable is removed, the wireless connection will automatically connect AP (specified by Group Policy).

  If the user then taken LAN cable back in, (after returning from meetings etc...), it connects to the wired LAN fine.

  If the user removes the LAN cable once again, (another meeting etc.) the wireless connection is not automatically connect again.

  The user can open the connections wireless at this point and manually connect to the access point.

  The opposite occurs if the user starts with no LAN cable it inserts after the start and then he removes, the wireless connection does it not connect automatically.

  "Connect automatically when this network is in range" is enabled in group policy

  IPv6 is disabled on the wireless card

  I tried to delete the contents of the Interfaces file in the program data\microsoft\WLANSvc\profiles

  WLAN/LAN switching works fine every time.

  Anyone have any ideas?

  Thank you!!

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the wireless connection that isn't automatically. That this computer is connected to a domain network, I would like to advice post you your query in the TechNet Forums.

  Forums TechNet for Windows 7
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps. Feel free to write us again for other queries.

• My helmet on my iPhone 5s will not work unless the phone is plugged in, even on a full charge. How can I fix it?

  I tried to turn my phone off, then on again and that did nothing. How can I get this problem?

  There could be some debris in the headset jack. First of all try to blow into it a few times and see if that helps. Otherwise, try to insert and then remove the headphones 8 - 10 times, then see if they are recognized.

• Free weather app will not stay on the phone long enough to read

  Free weather app on my Apple I phone 5 c won't stay on more than 2 seconds.

  Do you have any idea how much apps weather there in the app store? Talk about the owner...

• 3.0.113 - gmail contact groups will not sync to the phone

  
  

  My contact groups are missing as well

• Reader will not print to the default printer, wants to save to file?

  Other software (word, e-mail prints) prints to the physically attached C4750 HP, no problem.  Other software (nitro?) PDf prints normally, so the problem seems to be specific drive.

  What I meant by the print dialog box, what you have a screenshot.

  Click on the button "Advanced" (top right) and you will find it there near the top.

• New version of Firefox is not compatible with the modules I want to use.

  I've just updated recommend Mozilla Firefox to the new 10.0. -Unfortunately it seems now that my Microsoft. NET Framework Assistant 1.2.1. AND my Norton Toolbar 2011.7.4.3. are not compatible to most and have been disabled.
  Is it possible to reactivate or I'll have to uninstall the new Firefox?
  Thanks for any help you can give me.

  original title: Please help!  The module extensions disabled!

  2011.7.5.2 is the correct version.

  You may need to do something similar with LiveUpdate when Firefox 11 is released.

• How can I remove a "do not disturb" sign for a specific contact? Their messages will not appear on the screen of my phone when it is locked

  How can I remove a "do not disturb" sign for a specific contact? Their messages will not appear on the screen of my phone when it is locked

  kochetova01 wrote:

  How can I remove a "do not disturb" sign for a specific contact? Their messages will not appear on the screen of my phone when it is locked

  Go to the message - details - do not disturb - off

• I have 6 music phone will not advance to the next continues to repeat song

  If you use bluetooth car, song keeps repeating and will not advance to the next song.

  I have the same problem, but I use a USB cable to the radio.

  Everything worked fine until I upgraded to the latest IOS 9.2. Everything works fine on the computer, but on the phone that you only get to play a song.  If you keep hitting the shuffle icon it changes songs but it's a pain.

  Come on Apple just your updates are not good enough.  How about testing before releasing upgrades.

• How can I activate my Adobe Photoshop CS.  It will not work on the line and must be made by phone

  How can I activate my Adobe Photoshop CS.  It will not work on the line and must be made by phone?

  You must download the version without activation of CS2.

  Download Acrobat 7 and CS2 products

  Install, then enter the new serial number provided at this link.