R3D files won't play (black screen)

Similar Questions

• import FLV files results in a black screen when he's on stage

  import FLV files results in a black screen when he's on stage. Why is this happening? I have a swf file, then using swf video converter convert. I then import the video and when it is put on the stage she translates into a black screen that had no pictures. This happens even when I play the swf file.

  The converted file works fine when I open it with a Media Player for this indicates clearly that the flash is having a problem.

  The SWF-> Video converter is very certainly at fault for your problems. That's why I think you should either use ActionScript to import the SWF file to play or import once in a new document and export it as a video directly from flash. I used FLV for a long time and I've seen a lot of questions. This is no easy task to convert a SWF to a video. I think it makes more sense to let Adobe do the work, it was designed to do.

• Windows Vista won't load - black screen each laptop time starts

  I have a Dell Insipron 1525, which does not load Windows Vista.

  I can't go past the Recovery Manager screen every time you start, and although I tried all the options available, it does not open in safe mode or normally.

  I tried the system restore (even if it says that it cannot find valid 'points'), as well as the repair of the system, and I have also run the Diagnostics, who said there is no error (although I could not see the final report). All paths lead ultimately to the black screen and although I can see and move the cursor, it is that I can get. Any ideas please?

  Thank you very much!

  Hi ZD_123,

  ·         Did you the latest changes on the computer?

  ·         You receive an error message?

  I suggest you follow the provided article and check if it helps.

  http://support.Microsoft.com/kb/946532

• C355 all-in-One won't boot black screen

  Hi all

  I have a C355 all-in-one who had a serious problem lately. When I try to turn on the pc with the power button, it makes the whirring sound, but the screen is black and it won't turn. The power button stays on and sounds like it starts up but the screen remains black and does not turn.

  I tried unplugging all USBs thinking it could be the conflict with the other drivers, but it does not work. It usually takes 20 + attempts after pressing the power button on and off with no screen until the PC actually turns. It is extremely frustrating, sometimes over an hour before I can get the computer on! I made sure that all drivers are up-to-date, and 8.1 windows is fully updated. I don't know what else to do to try to solve this problem. This PC is not under warranty but its still relatively new. I wouldn't have to spend money on another computer for this reason. If anyone has had this problem or have any suggestions to try to fix? Thank you.

  I ended up taking the all-in-one to a repairman. The cpu has been damaged from overheating. They said it was a common problem with all-in-one which have an amd cpu and warned me to stick in the future equipped with Intel processors. The cost of the repair was too expensive for my cheap all-in-one so I got the hard drive recovered and let it go!

• Replaced the G550 motherboard. Won't boot black screen and high.

  I replaced the motherboard in my Lenovo G550 laptop cause the old one was fried. It's the exact same model of the motherboard with a new processor. I carefully put it back together and double checked all the connections. Now when I turn it on, it made all the right noises, I hear the fan and hard drive starts, but after 2-3 seconds, the HARD drive and fan go quiet and the hard drive light turns off. The laptop stays just slowed after this point and the screen is completely black, no display at all. Any help much appreciated.

  Thank you

  THE FIXED! .. After leaving the laptop running for about five minutes, I noticed that the right part of the palmrest botton was really hot. That's where the USB slot Council separte connected to the motherboard. So I opened the laptop again once disconnected the cable flex of the USB card, turned on again and it starts without any problem. Everything works perfect now just need to find a replacement USB Board now on this side. Can't believe that the USB Board was causing the problem.

• ITUNE FILES, MEDIA PLAYER FILES WON'T PLAY OR NO NOISE FOR NOTHING. (YOU TUBE)

  AFTER THAT WINDOWS UPDATE ANY OF MY MUSIC FILES OR VIDEOS WILL PLAY OR SOUND ON MY LAPTOP. VIDEOS ON YOU TUBE OR OTHER ONLINE DON'T SOUND OR SUGGESTIONS?

  Hello

  ·        You have the default Windows sound on your machine?

  ·        The updates you have installed prior to this problem?

  You can follow this link & check if the problem persists.

  No sound in Windows

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 WMP 12 a .asx file won't play audio stream

  I see this problem anywhere on the Internet but no solutions. On my Windows 7 machine, I want to read a file .asx on a particular web site that plays very well on my XP machine. But in Windows 7 (64-bit), I get the error C00D11B1. The .asx file points to a .wma file when I look inside.  My 12 WMP plays .wma files perfectly straight when not redirected through a .asx file. The file in question is a non-protected streaming file (no download).  I ran sfc/scannow and it found nothing abnormal.  I tried playing the file with Real Player but still not the same error of Windows Media Player. Any ideas appreciated.

  I see this problem anywhere on the Internet but no solutions. On my Windows 7 machine, I want to read a file .asx on a particular web site that plays very well on my XP machine. But in Windows 7 (64-bit), I get the error C00D11B1. The .asx file points to a .wma file when I look inside.  My 12 WMP plays .wma files perfectly straight when not redirected through a .asx file. The file in question is a non-protected streaming file (no download).  I ran sfc/scannow and it found nothing abnormal.  I tried playing the file with Real Player but still not the same error of Windows Media Player. Any ideas appreciated.

  Windows Media Player 12 does not all media files in an ASX playlist on a computer that is running Windows 7

• S10 - 2 won't boot, black screen

  Don't know not what has happened, one day it worked fine the next day, I pushed the power button and I could hear the hard drive turn into action, all of the lights (power, battery and wireless communication) all lights up and the hard disk light flashes as usual, then I hear the hard drive to stop. While all this takes place (about 5 seconds), the screen stays black and never comes.

  I can't use the F keys to try to get to the bios Setup and I see no windows start because the screen is black.

  Can someone tell me what to do?

  
  

• YouTube won't play full screen on Chrome

  When I select full screen, window stays, the same size, but moves at the top left of the screen. I go into settings and my hardware acceleration of the reduction option is gone, it used to be here... This only happens in YouTube, other videos on different sites, I can select full screen without problem, even if the acceleration of the reduction option went there too. Now I have only 4 options to choose in local contexts. He also went global settings.

  I tried to clear the caches etc... no joy. It works fine on IE9 for me, but I've always used Chrome & GMail and do not want to stop.

  I use Windows Vista Business 32-bit SP2, my browser is Google Chrome Version 26.0.1410.64 my Flash version is 11.7.700.179, which is the correct version for my browser and the operating system is up-to-date. Windows, Chrome and Flash upgrades are all topical.

  I've been on the forums, I have enabled plug-ins, I erased and deleted the caches and Adobe files and it is now getting boring.

  I realize there was an update recently, but I don't want to start messing around on uninstalling and digging at the earlier versions etc... Is not just intended to be incorporated into Chrome and updated automatically so that users can avoid doing these kinds of things.

  If anyone can help, I would be grateful. If you need to know anything else, please ask.

  Thank you

  Martin

  
  

  I have passed this along to our Chrome team for their contribution.  Did you notice a difference if you switch to the system of Flash Player version?

  http://helpx.Adobe.com/Flash-Player/KB/enable-system-Flash-Player-Google-chrome.html

• AVI file won't play in Premiere Pro CS4

  I wonder if someone can show me a simple solution to this problem.

  I did an AVI movie with my Canon Powershot A2100 640 x 480 to 88 kbps and 769MB. After a tutorial of Project http://tv.adobe.com/watch/learn-premiere-pro-cs4/getting-started-02-setting-up-your-first-/ (and more) I can't my video to play. The games sound but the video portion is not... It does not correctly play with Windows Media Player

  As a separate trial, I ran my video using Adobe Media Encoder CS4 export to another AVI file and this file will play in Premier Pro. The only difference is that I exported it without the audio.

  Any thoughts?   My goal is to change the sound and hopefully reduce the size of the file so that it will be able to my site web watch.

  Thank you for your time

  Ralph

  For a film MJPEG, another popular CODEC is the Morgan.

  Good luck

  Hunt

• HELP... flash drive won't play full screen

  After a recent update my flash player do not play in full screen it goes full white screen. (firefox)

  Update the device drivers for your graphics card, or use the Flash Player settings, display panel and uncheck "enable hardware acceleration".

  

• Pavilion dv6 won't start - black screen

  
  

  Hello

  It is always interesting to try first following a Hard Reset.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Plug the power adapter (leave the battery for now) and see if the laptop boots.

  If the above doesn't help, can you post back with the complete model number and your notebook dv6 series Nr - see here for a guide to the location of such information.

  Kind regards

  DP - K

• music file will not play in second hard drive double click Error "" the requested operation requires a rise ".

  Original title: music file won't play second hard drive by double click.

  Windows 7 ultimate/64

  I have a second hard drive on which I store my music files. If I open a player (Foobar is what I use now) and open the music file in the program, he plays very well, since the second HD.

  But if I double click on the music file (.mp3, usually), I get the message:

  "The requested operation requires a rise."

  I think it should open in the player by default when I do that.

  I remember well, it wasn't the case when I started to use this computer (it's fairly new), while something might have changed.
  I have the .mp3, .wav etc all default extensions for the Foobar player program.

  I went through elaborate measures to appropriate the entire disk and have granted full permissions for me as a user, following to the letter one of the many sites of the detailed instructions for this operation. But there is no help in sight.
  Original title: music file won't play second hard drive by double click

  So I can let my reader opens a music file leave a second drive, but I can't call him by double click or click right/context citing the player. When I do that, nothing happens, but I don't get the message "requires a rise."

  Every time I think that I am getting to know Windows 7, something like this happens. Avoid to receive life dull, of course.

  Thanks a lot for your suggestions. I've pretty much exhausted my own attempts.

  Jack

  Update: I think I've solved the problem. I have no idea that what caused it, but here's what fixed it:

  1 uninstalled Foobar with usual Control Panel uninstall
  2A through the startup disk everything and delete folders or files with the name "foobar" in them.
  3 did the same for the registry (creating a point of restoration first, of course)
  4 restarted
  5 download and install Foobar.

  Yes.

  Works very well.

  A big thank you to all who responded.

  Jack

• my player windows media apart when I try to play the video the sound works but there is no picture just a black screen and all my music files are there and play very well sound just video that gives trouble?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: my Media Player does not work when I play video all I get is the sound, the screen is just black hear any picturedoesn can't if it's a DVD or a download on the internet its just sound and a black screen?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  Hello
  
  1. have you made changes on the computer recently?
  
  Method 1.
  Change hardware acceleration
  You can try to change the hardware acceleration in the middle and check (you can try another level too.)
  a. right click on a space empty on the desktop.
  b. go to the resolution of the screen.
  c. click Advanced settings, and then click the "troubleshooting."
  d. set the hardware acceleration in the middle. (here you'll get the only option your video card sound support).
   
   
  Method 2.
  a. you can also check that Windows is up-to-date to check updates for your hardware.
  You can also run the difficulty below that diagnoses and identify codecs that can cause windows to become unstable or stop responding.
  http://support.Microsoft.com/GP/video_freezes_or_crashes
   
  b. if the problem persists, you can check the latest video card driver provided by the manufacturer of the PC that is compatible with Windows Vista is installed.
  You can also check out the article below which explains to update hardware drivers.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
   

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My video played very well yesterday, now, he will play not (only a black screen in preview).

  My video played very well yesterday morning, now it won't play.  I only see a black screen in preview.  Shake the black screen and it says "clip"stopped"I tried to start to play arrow under black screen, arrow of reading of chronology and play and play upward timeline option.  I can even change the duration for each slide, add and delete audio and insert pictures.  I can not however add a title no longer slide.  Help, please!

  My video played very well yesterday morning, now it won't play.  I only see a black screen in preview.  Shake the black screen and it says "clip"stopped"I tried to start to play arrow under black screen, arrow of reading of chronology and play and play upward timeline option.  I can even change the duration for each slide, add and delete audio and insert pictures.  I can not however add a title no longer slide.  Help, please!

  ==========================================================
  I can only imagine that you are referring to Windows
  XP Movie Maker 2.1.

  Some general info that may be worth a visit:

  Since the issue is recent... it may be worth trying to
  do a system restore to an hour before the beginning of the question.

  See the following article:

  (306084) how to restore Windows XP to a previous state
  http://support.Microsoft.com/?kbid=306084

  If you have automatic updates of Windows...
  possible that a driver has been downloaded and installed
  It's not as compatible with your system such as
  you already had. This sometimes happens with video
  Drivers. You can try a system restore or a driver
  Roll back

  (306546) HOW to: use the driver to restore roll back feature
  a previous Version of a device in Windows XP driver
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;306546

  Three possible causes for Movie Maker questions

  (1) the incompatible source files... (eventually... MPG or MP3)
  It is sometimes useful to turn off the filters.

  Tools / Options / Compatibility tab, uncheck all filters...
  also, it may be interesting to try left click on "restore all".
  Default button".

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  (2) files source corrupted... the only solution for this would be to
  Remove the source files of the project one at a time and
  try to save each time until the problem file is discovered.

  (3) project is too big or too complex for system resources.
  Create several small projects... Save as WMV.
  Then re - import WMV files collected / drag in the timeline
  and record the final movie.

  XP Windows Movie Maker 2.1...
  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  XP Windows Movie Maker 2.1...
  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...