R720XD - Perc H710P Mini - Firmware version 21.2.0 - 0007

Similar Questions

• PERC H710P Mini may not increase storage

  Hello, im trying to develop the existing Raid 6 storage. I've added 4 new drives and they are listed as loan. However, in Volume, it has no other choice to reconfigure. What Miss me? I read that only Raid 10, 50, 60 cannot be increased...

  Ah... it's because you have several bays in the same set of disks (called "slice"). You cannot reconfigure arrays in slices. You will need to do a backup/restore or remove the second VFD to expand / reconfigure.

• R.620 - Downgrade of the CREE H710P Mini Controller Firmware

  Hello

  Recently, I ran dsu to update the firmware in our r.620 servers.   Among all the elements of the firmware, there is a firmware for the controller, showing us that need to downgrade.

  [] 7 firmware for - disk 0 in bottom of basket 1 PERC H710P mini controller 0
  Current version: Downgrade AA0D to: AA09

  I checked the current RAID controller has installed version 21.3.2_0005.  It's true that I need to downgrade or it is a mistake?  And if the downgrade is necessary, are there instructions on how to do that?

  Thank you

  8rocket,

  You need to downgrade. The reason why you see this result, the firmware is newer than the version on the memorandum of UNDERSTANDING. It offers the firmware there, which is AA09, so it gives you the only option as possible. Which is to downgrade.
  So I'm not concerned with it.

  I hope this helps.

• Where the PERC H330 Mini 25.4.0.0011 firmware?

  I installed OMSA 8.3 week last on a brand new R430 with all the latest available firmware upgrades applied.

  Despite this, the server notifies:

  "The current version of the firmware 25.3.0.0016 is earlier than the version required 25.4.0.0011 for Controller 0 (PERC H330 Mini).

  I tried the Dell downloads for the 25.4.0.0011 & driver version without a bit of luck.

  Can someone point me in the right direction?

  Hello

  There was a problem with this version of firmware. We have learned from the download site. 25.3.0.0016 is the version that is currently available.

  25.4.0.0011 probably won't. A new version that fixes the problems of fate in his place. If you do not want to wait the new FW version or a new version of the OMSA to get rid of the update notification, you can change the file version. In your installation of OMSA directory there is a file called lsiver.cfg. The current version information is stored in this file. The default installation directory should be something like:

  c:/program files/dell/sysmgt/sm/cfg

  The file must be located in this directory. If you open the file with Notepad and search for H330, you should be able to locate the H330 current firmware version information. There are several H330 controllers. If you don't know what controller you are using, you can change all the 25.3.0.0016 or you can just change the controller you are using. I think that there are three different H330s appear in this file.

  Thank you

• Reference Dell PERC H710P: Firmware hangs on Windows RTM 8.1 with the default driver

  My H710P Dell (with the last FW A04) PERC was working completely fine with the driver 5.2.220.64 on Windows 8, until recently, I tried installing Windows RTM 8.1 on the machine, it caused hang FW at the launch of the Windows installation:

  266	[Information, 0]	05 seconds restart	Controller ID: 0 edge revision: A01	1367
  261	[Information, 0]	05 seconds restart	Controller ID: 0 Package version 21.2.0 - 0007	1366
  141	[Information, 0]	05 seconds restart	Controller ID: 0 battery present	1365
  1	[Information, 0]	04 seconds restart	Controller ID: 0 Image version: 3.130.05 - 2086	1364
  0	[Information, 0]	04 seconds restart	Controller ID: 0 has started the initialization of the Firmware: (PCI ID 0x5b / 0x1000 / 0x1f31 / 0 x 1028)	1363
  15	[Fatal, 3]	2013-09-11 21:00:27	Controller ID: 0 Fatal firmware error of: line 1232 in... /... /RAID/1078dma.c	1362
  15	[Fatal, 3]	2013-09-11 21:00:27	Controller ID: 0 Fatal firmware error of: line 1232 in... /... /RAID/1078dma.c	1361
  15	[Fatal, 3]	2013-09-11 21:00:27	Controller ID: 0 Fatal firmware error of: driver has detected possible FW, FW to stop blocking.	1360
  389	[Information, 0]	2013-09-11, 20:57:11	Controller ID: 0 host driver is loaded and operational	1359
  44	[Information, 0]	2013-09-11 20:56:33	Controller ID: 0 time established for power: time 2013-09-11 20:56:33 34 seconds	1358

  Windows 8.1 was delivered with the version of the downloadable 6.801.5.0 driver from Dell, I also tried and committed in my opinion the FW even hanging the question.

  I'm afraid - anyone know what is happening?

  See you soon

  Chris

  Appearantly this is related to the latest driver from Dell. I've found a workaround, but it's a bit complicated:

  1 connect a USB stick which is big enough

  2. install Wndows 8.1 on the * USB drive *.

  3. start Windows, and then remove the current driver and install the previous driver for Windows Server 2012.

  4. use the 3rd party software (say that Ghost) to copy the windows from USB drive to VD on Dell PERC H710P controller.

  5. start Windows in the USB drive again and use 'bcdedit' to clean boot stuff

  in any case, I'm LSI 9361-8i, so it won't be a problem for me in the future...

• RAID Controller degraded by the Firmware version

  Hi all

  My security system is sending me alert because my RAID controllers being day. RAID controllers are fine, but the State is deteriorating because of the "latest Firmware Version available" which means I can't properly control if something really bad happens.

  Is it possible to disable the alert or lower the minimum version expected? I just can't reboot all my servers just for an update of the RAID firmware.

  My security system expects a status: Ok

  Thank you very much in advance!

  Greg

  Below the output omreport:

  omreport storage controller $
  Controller PERC H700 integrated (Embedded)

  Controllers of
  ID                                            : 0
  Status: No reviews
  Name: PERC H700 integrated
  Location ID: shipped
  State: degraded
  Firmware version: 12.10.1 - 0001
  Latest Version of the Firmware available: 12.10.4 - 0001
  Driver version: 00.00.06.14 - kh1
  The minimum required driver version: not Applicable
  The Storport driver version: not Applicable
  Minimum required: Version of the Storport driver: not Applicable
  Number of connectors: 2
  Regeneration rate: 30%
  BGI Rate                                      : 30%
  Consistency check rate: 30%
  Rebuild rate: 30%
  Alarm status: not applicable
  Cluster mode: not Applicable
  SCSI initiator ID: not Applicable
  Cache memory size: 512 MB
  Patrol read mode: manual
  Patrol read status: stopped
  Patrol read rate: 30%
  Read the iterations of patrol: 2
  Give up control of consistency error: disabled
  Enable reversible hot spare and replace the: enabled
  Load Balancing: not Applicable
  Auto Member Replace on Predictive Failure: disabled
  Redundant path view: not Applicable
  Able CacheCade: Non Applicable
  Persistent backup: disabled
  Encryption Capable: Yes
  Currently key encryption: No.
  Encryption mode: no
  Preserved cache: No.
  Spin down drives unconfigured: disabled
  Turn down hot spares: disabled
  Centrifuge the configured drives: not Applicable
  Automatic disk Power Saving (idle C): not Applicable

  Thanks again!

  gcharot

  Is it possible to update the firmware without system reboot? I am running CentOS 5 and 6

  No, you can update the firmware without a reboot, but the update will be based in the controller cache until a reset is performed. So yes, you can perform the update without reboot, but it will not take effect until you perform a reboot.

  Thank you

• H710 PERC (PowerEdge R820) firmware update

  Hello world

  I have a new server PowerEdge R820 and I'm not able to update the firmware of PERC H710 (21.1.0 - 0007, A03) to the latest version 21.2.0 - 0007, A04.

  I tried with a key USB bootable with the files BACK to the inside, but just update software says no: "no controller detected."

  The server is online since 2 weeks now, so there is no current RAID rebuild and I tried also with PERC H810 firmware, no luck.

  Any advice? Thank you

  Daniele

  If the system has access to the internet, reboot the system, press F10 when you are prompted to enter in the life cycle of the controller, then once its there, select Firmware update, exit FTP selected server and proceed from there, its quite intuitive. One of the choices will be updated the H710 controller.

• Calculator chart 50g. How can I find my firmware version? Thank you, johnnaben

  How can I find my firmware version?

  Thank you

  johnnaben

  I thank very much - the two methods have worked

  johnnaben

• R7000 - change of firmware version

  I already had firmware version: V1.0.6.28_1.1.83 installed, but now find the newest website is Firmware Version V1.0.4.30_1.1.67. Why the most recent version is down? I would like to re - download version V1.0.6.28_1.1.83

  Thank you

• Nighthawk R7000 Firmware Version V1.0.6.28_1.1.83 adds a new network called NETGEAR41-arlo_246912

  I just upgarded my R7000 for the latest firmware of the device itself. Now, I have an additional network that matches my real network called NETGEAR41-arlo_246912. I tried to switch my camera on another channel, and he followed. He got the exact same force that my wifi. The net effect is that I have 2 signals on channel and my coverage and bandwidth has suffered.

  Anyone know what it is and how to turn off?

  OK, found a similar bug by someone else with a solution:

  https://community.NETGEAR.com/T5/Nighthawk-WiFi-routers/r7000-firmware-version-1-0-6-28-strange-3rd-...

  Basically, they have added a feature and it enabled by default. It is in the STANDARD settings and no ADVANCED setting. Disable the arlo. Ugh.

• Site WEB BLOCKED on WRT54G V6 (Firmware Version: v1.02.8)

  Hello friends,

  In short: why block some Web pages and others do not use this feature in my router?  As mentioned above, I run a small office and uses one: WRT54G V6 (Firmware Version: v1.02.8): router.

  For example, I managed to block sites like 'sex.com' and others.  Also, blocking sites by keywords such as: News, music, vid, naked, etc.  BUT, when I try to block FACEBOOK or TWITTER or by URL or keyword, guess what: IT DOES NOT WORK...!

  No idea why this is happening and how can I be successful in the configuration of this feature?  I'd appreciate that!  Blessings...

  Just to let you know two things:

  1. I contacted Linksys live chat and they confirmed Web sites I want blocked using the protocol https, thye can not be blocked because the router features

  2. as mentioned before, I warned an account with DynDNS as you suggest, followed their instructions, and after 24 hours or more, the protection is active...! Now no one in my little office is losing work time to monitor their FB status or send tweets!   In addition, because my office is on the first floor of my house, I have peace of mind because I can block different sites using their "protection plans" categories: sport, games, porn, social media, blogs, videos, etc.   I love...!  I would recommend this service to anyone

  Thank you

• Access Point WRT1900AC & Firmware version: 1.1.10.167514, it cannot be accessed the config page.

  Hello!

  I am a new user of router dual-band WRT1900AC . The installation has been updated instantly to
  Firmware version: 1.1.10.167514
  Release date: June 30, 2015

  My WRT1900AC is configured as a wireless gateway.

  https://community.Linksys.com/T5/wireless-routers/WRT1900AC-as-wireless-access-point/TD-p/847286

  Also, I have disabled firewall and uPnP.
  A tutorial here:

  http://www.Linksys.com/us/support-article?articleNum=140371

  Everything works except that without access to the router config page.

  The problem is, I can't access my page to config WRT1900AC Wireless Access Point and the only solution is to connect temporary exit HAND ROUTER LAN to WAN WRT1900AC, can I access my AP

  (after restart of course). Change after I return the cable to the LAN again and restart WRT1900AC. This works.

  Yesterday, I spoke with live chat. I received recommendations:
  "Once the router is configured to bridge fashion, page configuration accessible only using its new IP address. The new IP address can be found on the main router DHCP table. It is because only in LAN - LAN, the

  WRT1900AC will be his disabled DHCP. »

  I also saw Table of customer routers main DHCP but I have not found the IP address of my wireless WRT1900AC Access Point there. I think it is a bug in the version of the Firmware: 1.1.10.167514
  Page config in the case of WRT1900AC Wireless Access Point is isolated or possible only thanks to the WAN WRT1900AC. It would be nice if someone confirms that and maybe in the next version of

  fix. :-) I have a beautiful smartphone App "Smart Wi - Fi" and I can not comfortably use it due to this error/bug.
  Otherwise everything works well and stably.

  inspire wrote:

  Hi chadster766!

  Thanks for your suggestion and a quick response. I have a feeling it would work then as you described. But how to set Internet settings in mode Bridge? I've already put a static IP address router IP address WRT1900AC. I see it with IP scanner.
  If I leave the cables as you suggest (hand router LAN to WAN WRT1900AC), the Internet does not work. In this case go to the config page, but Internet with other devices will not work. Also good Wifi, it works but can not access. How to set the Bridge Mode? (I think this is my problem in this scenario)

  IP address of the router (LAN):

  Connectivity-online-online details router LAN => Edit

  * If your main router IP subnet example is 192.168.0.x, then set the address of the WRT1900AC IP to an IP outside the range of the main router DHCP. Ex: 192.168.0.2

  Bridge mode:
  Connectivity-online Internet-online IPv4 settings => Edit-online Bridge Mode

• WRT54G Firmware Version: update v7.00.7 Beta?

  Hello

  I have a router wireless EMEA WRT54G v7 with Firmware Version: v7.00.7 Beta. I can't find an update of the firmware on the site.

  Can you please help?

  Thank you

  Firmware update is available. Version 7.00.8 is available on the EMEA website. Click here!

  It is enough to click on "Downloads" and select the correct hardware version.

• How do I know the hardware version WRT54G to only the firmware version and date

  Hi - on a Linksys WRT54G, serial numbers and the version number have
  been worn except in the case of the unit, so I don't know what version it is. He has since been released in it's 'safe place' to which I don't have physical access (and yet they want me to admin it). Don't think that I even get cable connect, wireless only. Gee. In any case... of the configuration screens I see:

  The current version of the firmware is 1.00.6 January 20, 2006.
  I could, I guess that to get the MAC address

  The default login and password are what is active.

  Can you tell what version of the material is, so that I can download the
  good firmware flash update?
  Thank you

  The best way is to check the hardware, but as you mentioned, it is not an option. I suggest that you check each firmware release notes, check the previous firmware versions and dates on each version of the output material. However, it may be tedious.

• WRT54G (version 2) Firmware Version Question

  Hello

  Beautiful room here. I'm glad that this facility exists.

  I have the router WRT54G version 2. Finally, I upgraded the version of firmware years before Cisco Linksys bought.

  A recent announcement by the people of Black Hat (treaties in this article of TechSpot) about their intention to publish a validation tool to exploit a vulnerability of DNS rebinding on a great many routers SOHO forced me to check for the latest update of firmware for my router.

  The interesting thing is that my router's Web interface lists the current version of the firmware as 4.30.12, but the latest version of the downloadable firmware that I see listed on the support site is 4.21.1. I'm not very surprised by this apparent anomaly. If I remember correctly, that firmware version 4.30.12 download is a beta that was supposed to fix a problem connecting WiFi to a certain type. If this version of the firmware was still considered a beta at the time of the acquisition of Linksys by Cisco - or a 'stable' later firmware version incorporating the same or better fixes for the issues addressed by 4.30.12 that had been produced at that time-so maybe 4.30.12 was ruled out.

  If you read the article of TechSpot and the associated table of preliminary vulnerability, test reports, you'll see that router WRT54G version 2 is not specifically listed. Version 3 of the router is listed as vulnerable, and version 5 of the router is not.

  So, my questions are:

  Everyone here is aware of information indicating whether or not the problem of DNS Rebinding vulnerability affects the WRT54G version 2 with the last registered (4.21.1) router firmware version?

  If so, does anyone know if yes or no Cisco plans to release an update for this old router?

  If the router is vulnerable and will not be solved with a firmware update I'll probably have myself a new LInksys router which is not listed as vulnerable. (Believe me, I'm not leaving this thread to bash Linksys. This router ran like a train of 24 hours a day for years without a single hiccup that was not directly attributable to the problems of the ISP. For the price, it's one of the best purchases of equipment I've ever done calculation. And I have done this since the beginning of the 80s when I was using a CP/M system and an Apple / / e.)

  If the 4.21.1 version firmware for WRT54G version 2 is not affected, I wonder if anyone knows if yes or no 'downgrading' of 4.30.12 to 4.21.1 is likely to lead to a failure of the router. (I'll probably try it anyway. If it brick the router I'll just go ahead and get a new one.)

  BTW, I use this router with the ease of remote administration and UPnP off and strong admin password that is changed each week. (When I always used wireless I used WPA2 AES with strong password, but I am all wired now with the systems running Debian testing).

  Forgive me for talking to myself. I decided to just go ahead and "downgrade" of the 4.30.12 firmware 4.21.1 version - just because I prefer to use a version of firmware known and supported for this material. The downgrade has gone well, so no worries about this.

  I'll look for news on whether or not this version of the firmware on this particular router is vulnerable to the flaw in DNS rebinding and acts accordingly.

  Sorry for the noise.