R830 satellite and video output via HDMI

Similar Questions

• Sound is more output via HDMI

  Hello

  I have a desktop HP m9300t with Vista 64 Bit SP2. It has a video card Nvidia GeForce 9300 256 MB with a HDMI output (and DVI).

  I've always been able to play the video and sound through an HDMI cable connected to my TV. A few weeks ago, I ran a few updates and uninstall several programs I do not use or need. I installed the Vista SP2 and updated my nvidia driver for the last available on the nvidia website. Now, I can only video output via HDMI, but no sound.

  I have the Realtek HDMI output defined as the default device under sound-> read (and it shows like 'work'). When I test it, I can see the volume up and down bar, but there is no sound on my TV. I also tried many different programs (WMP, Winamp, Media Player classic, Firefox, but still no sound.)

  Sound works fine in my computer speakers when I put as device by default.

  I tried two different HDMI cables, which I know work because they took out his other devices.

  I've updated my audio driver for the last available.

  I installed an older video driver without success.

  I scoured the internet for hours, but nothing I can find solves my problem.

  Hello

  Check the device settings in device that receives the stream of video and audio HDMI.

  What camera brand and model has no sound via HDMI?

  What is plugged into the SPDIF Jack on the back of your PC, no matter what?

  Go to www.realtek.com and download and install the latest audio driver.

  Go to www.nvidia.com and download and install the latest video driver.

  You could also try to uncheck HDMI and check digtial output and see if that produces sounds.

  These "how-to" HP articles can also provide assistance.

  Even the latest drivers and updates may cause the problem.  I have run into a problem of sound with Realtek and had to fall back to the original audio driver supplied with the PC to get his job.  Five months later, Realtek audio driver problem fixed.  You need to maybe do this or maybe go back to the last good Windows restore point known. Of course if it does not then you would have to depend on your image less hard drive backup.

  It is also possible that your HDMI audio circuits are bad.

• Satellite P300: no sound via HDMI on HDTV

  Hi all

  I get video but no sound when I connect my laptop to my Toshiba HD TV.
  I looked at the settings, but they seem to be ok.

  Any help would be great.

  You must follow these steps if you connect a HD TV to the laptop:

  1. fix a TV to the laptop via HDMI, while both units are in a * "power" off * State.
  2. turn on your TV first, then the laptop.
  3. laptop should automatically detect the HDMI connection and video output can be seen via HDMI to the TV.
  4 launch Sound (start (Windows logo)-> Control Panel-> hardware and sound-> Sound)
  5. on the playback tab, select "Peripheral digital output (S/PDIF)" and click on "Set as default"
  6. click on 'Apply' then 'OK' to close his
  7. the sounds played on the l should now also be heard on the TV (keys Fn + ESC or the volume dial can be used to cut the sound to the computer)

  _Please Note: _
  1. peripheral digital output (S/PDIF) installation default through Volume mixer does not output digital audio via HDMI.
  2 HD DVD-video can only be displayed on the LCD of the computer bulletin board or on a television connected to the output of HDMI port. HD DVD Video cannot be displayed on televisions connected to the S-Video port or an external display connected to the RGB connector.

  Hope this helps

• XPS 10 and video output without the dock/keyboard

  Is it a cable out there that can leave my video output Tablet HDMI, without the need for the dock? This would be ideal for Netflix as I used on my iPad.

  Sorted. I need the following Dell adapter

  Accessories.euro.Dell.com/.../ProductDetail.aspx

• Cannot connect by Satellite P750 to TV via HDMI

  Hello

  I am trying to connect a Satellite P750 with Windows 7 to a TV via HDMI and have had no success.

  I tried without success to the following:
  1. I chose F5 function to extend the desktop with desktop + HDMI, but also just HDMI only
  2. I tried the windows P for the use of projector function
  3. I tried different TV including Panasonic and Sony Bravia
  4. I tried another HDMI cable, I use my Xbox with
  5. in the devices section, I can see the TV is added and tried to change the settings, without success
  6. when I looked online for a solution, a solution was to download HMDI Control manager.
  7. After installing it and when I tried to use it, I got the pop-up message "using the HDMI control, you must activate it.

  So I was wondering if the HDMI port is not properly enabled. According to me, he works one way or another, otherwise the computer would not be able to detect the TV when connected.

  Can you please offer any assistance?

  > 1. I chose the F5 function to extend the desktop with desktop + HDMI, but also just HDMI only

  And what exactly happens if you press Fn + F5?
  You see the Toshiba Flash Cards appearing at the top of the screen menu while pressing FN + F5?

  Please note that the output screen must be changed before you start to play a video.

  Right channel/HDMI port is chosen in the settings of your TV?

• No sound on the TV LCD Satellite A200 is connected via HDMI

  The problen is: I connect to laptop (A200) for LCD TV (Philips) by HDMI. The video is OK, but his stay on laptop not LCD TV.

  Maybe the problem is THAT HDMI 1.2 does support audio and video not together? Only 1.3?

  Sorry for my English

  Hello Maria

  I have connected successfully Satellite A200 to my 32 LCD TV with success. Be sure to use high quality cable. As Gantz has already written sound can be enabled in the sound properties. When the cable is connected on the reading tab, enable HDMI output.

• You can exit video live via HDMI on Vixia HF R400 without registration?

  I want to hook up a HDMI video switch two camcorders and HD monitors to a computer and capture output software such as Adobe Premiere Pro allows to capture the video and sound. Of course, the computer will have an HDMI video capture card.

  Yes, it should work. The R400 has an HDMI output, and if I'm wrong, on-screen-display output can be disabled.

  However, remember that the R400 wants to record with a very fast shutter speed, which in low light, the image looks quite grainy. I advise to use an HD webcam instead if that's an option for you. Old M-series cameras are a little better and also have an HDMI output. In fact, I think to just about all of Canon's HD camcorders. Whether or not it will work depends more on the configuration of your other equipment.

• Dolby Digital Audio output via HDMI on Satellite A200 cable?

  I don't see how to get a Dolby Digital signal on my laptop!

  I have a screen LCD HD 1080 p television. With the help of a cable HDMI from laptop to TV gives a beautiful image. I then use an optical link between TV and Surround amplifier... However the amp does not recognize the signal as a Dolby Digital signal.

  The record is not clear on issues of Audio. The Toshiba HD-DVD player shows Dolby Digital option and I guess that's out put down the HDMI cable? I hear through the TV speakers.

  Hints would be much appreciated.

  Concerning
  Paul

  Hello

  To be honest I didn t know that there is Satellite A200 laptops with HDMI output. Can you please tell me what A200 you have (A200-xxx)? Are you really sure have an A200?

  Back to your problem: as far as I know the Digital Dolby audio can be sent if the laptop has S/PDIF port. You must also use an optical cable and connect laptop to your amp directly.

  What you do now is send the signal to the TV only. I don't really know if you can browse the Dolby signal to the amp.

• Satellite A100-062 - connect via HDMI LCD monitor

  Hello

  I wish I could connect my laptop Satellite A100-062 to LCD TV.
  The TV has a HDMI input. I understand that I could get a cable to connect DVI to HDMI, but I'm not sure I'd be able to output/DVI laptop computer.

  Is it possible to connect the laptop to a TV LCD with HDMI? If so, how would that be better achieved? Do I need a series of cables converters?

  Any comments on this would be greatly appreciated.
  Concerning
  Ben milk

  Hello

  As much as I know this laptop can't stand out DVI, or HDMI port.
  It supports only s-video and RGB (monitor) output port.

  My Satellite phone supports a HDMI port output. The external monitor supports DVI and HDMI.
  I connected my laptop via a DVI-HDMI laptop/DVI HDMI cable on my monitor.

  I don't know if there is a RGB to HDMI adapter I doubt m
  But I found another solution;
  You can use a cable S-video to SCART and was able to connect the converter as Lindy - SCART to HDMI between laptop and TV or LCD display.
  This converter is not cheap, but it s about 120Euros

• Satellite Pro L670 - connection via HDMI to TV Toshiba

  Hello! Guys,

  Newbie here so be gentle.

  My son bought a Tosh L670 with HDMI output. He tried in vain to connect to our Toshiba LCD 42 "HD Tv via the HDMI 3 connection. All he gets is a blue screen on the TV. Anyone know how to get the laptop appears on the TV please... before it does my head! We tried every HDMI connection and get the same result - a blue screen on the TV.

  Be forced for any advice you can give.

  When you connect your laptop to TV HDMI port check that you use on TV. Also make sure that sure this port is enabled on the TV.
  After checking all this use the FN + F5 key combination and switch to TV mode.

  Using the FN + F5 key combination, you will have several options. This is also described in the document s user manuals.

  If please test and let us know if it works or not.

• Channels disappear in WMC at the output via HDMI

  I have a tuner TV USB (connected to an internal antenna) on my Windows 7 laptop. When I use just the laptop, I can watch TV without any problems. However, when I connect the laptop to a monitor via a HDMI cable, all channels disappear and running a scan does not find an any of them. Help the PC on the screen works fine - just Windows Media Center is not.

  The laptop is a Dell Inspiron M301Z and the TV tuner is a DVB-T205 August (v2.0).
  Someone at - it just an idea as to what might happen?
  Thank you

  This may or may not be related but I was also faced with HDMI and TV on Media Center and Media Player playback.   You say that using the HDMI interface as a PC monitor works fine, just that WMC or MP do not play TV Live (I guess that's what you mean by "channel disappears").   I encountered the problem that I can not play back recorded OTA TV via the HDMI port, but it works fine on the computer screen, just as you describe.  I have not tried to directly play live TV like this so I do not know if this also fails.  However, I discovered that WMC and MP read properly on the TV connected via the analog VGA port on the laptop.  You can try to hook up a monitor via VGA and then try to watch television on the subject.  In my case, the HDMI connected TV present a good computer bureau and icons, etc, but when I tried to play recorded TV, Media Player won and gave me a message about missing files.  I find that VLC Player works with HDMI, but it does not play HD as well as WMC material due to its fine use of the acceleration of graphics chip.

  If your tuner key comes with the TV/DVR software (most of them do), you can also try to run that and see if it works on the HDMI monitor.  I posted a query on this forum about the problem I found in mid-October ("Mirrored display causes error CODEC... "), but no useful response so far.

• Windows 7: Video only via HDMI, no sound

  Upgraded to Windows 7 and now allows coming only video HDMI, no audio signal connection.  HDMI option is no longer available in the sound options.  Help, please.

  1. after installation of Windows 7, have you installed the latest drivers for your video card?

  If not download them from the manufacturers Web site and install them.

  2 do you have HDMI (or audio digital) as the device audio (it may appear as an option after installing drivers)?

  Click Start, type: sound. Under control panel, and then click sound. Then set the audio device by default.

  3. you can also try the troubleshooter to find connection problems:

  A. Click Start, and then click Control Panel

  B. type troubleshooting at the top right of the search field and select troubleshooting

  C. click on hardware and sound, and then select audio.

  4. for solving audio problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  5. connect your computer to a TV:

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

• Satellite R630 - no sound via HDMI

  Hello

  I can't find a way to get the sound through HDMI on my R630. I tried the audio properties in the Control Panel, but there is no option to set the audio by default to HDMI device as there was on my old machine.

  Any ideas?

  Thank you
  Mark

  Hey Buddy,

  I had the same problem but the solution is quiet easy: you must set HDMI as output by default sound settings in Windows.

  Simply check this section of the FAQ from Toshiba, in my case it worked:
  http://APS2.toshiba-tro.de/KB0/TSB7601WR000FR01.htm

• Pavilion dv5-1010us: can't get audio (video only) via HDMI of HP Pavilion dv5 to my smart TV VIZIO

  I need help to get the audio to work using my hp pavilion dv5 to my smart TV VIZIO HDMI. the video works fine, but I don't understand exactly what are the settings audio sub I need to adjust to make this work? Help, please!

  You are welcome

• All-in-One PC 20-E014: my 20-E014 screen All - In - One PC has failed. Can I run the video output via a USB to a smart TV USB connection?

  Can I use a smart TV for a monitor by coming through a USB?  I have to set up an external monitor via the PC (which has a broken screen)?

  felix442

  Hello;

  Let me welcome you on the HP forums!

  Others may be different, but my guess is no.

  I use an external monitor connected via USB - but I had to install drivers so Windows to see and to do that, I had to have a working screen.

  Screen, I don't know of any way that you can install the necessary drivers.

  Also, don't really allows an external display as a replacement for the screen of the laptop because it does not start work until Windows is already loaded, and it is after that you have to connect.