Re: Driver D: is missing (endangered) on Tecra A series und Vista

Similar Questions

• Cannot find driver modem XP on downloadsite for Tecra A8

  Recently, I have a Tecra A8. Makes difficult to Vista I uninstalled Vista and installed Windows XP service pack 2.
  I could download and install all driver XP toshiba except modem files successfully.

  Today my system displays modem and a PCI device driver that is not installed. Please advise me on this issue.

  RGDS

  ROVER

  First of all, you need to ensure your Tecra A8 series.
  European driver Toshiba page provides drivers 2 different sets of Tecra;
  PTA83 and PTA82. Choose the right.

  Download the modem driver, and then try to install it from the Device Manager!

  It should work

• HP pavilion 15-n248sa: a media computer driver needs is missing on 8.1

  "Sorry I have European account.

  Hello I have a problem, I used before archlinux now I want to reinstall agaion windows 8 in my 'Hp Pavilion 15-n248sa' hp, and I have problem during the installation I get an error

  "

  A media computer driver needs is missing. It could be a driver DVD, USB or HDD. If you have a CD, DVD or USB flash drive with the driver on this subject, please insert it now.
  
  Note: If the installation media of Windows in the DVD or on a USB drive, you can remove this step. »

  I look at the google and I found that I have to change usb 3.0, USB 2.0, but I don't have this option in bios...

  Also, I tried to load sata but it seems that the sata is not going... I will be very greatfull for help.

  Sorry, that didn't work.

  Are you sure have installation media good?

  Normally, you get this error when the installation file is not complete or corrupt.

  The driver ahci for the Pentium N processor does not exist.

  You can try the one I've attached below which I derived from the chipset driver, but I think Miss me the part of it.

  However, it was what he was in for this chipset chipset driver file.

• my floppy drive A: drive / disc is missing...

  my floppy drive A: drive / disc is missing... not found... where it's going and how do I get it back... I still have the location on my lap... I use a xp media center sp3 2 k 5, I just do a fresh install, but it was gone until I did it. system also has a few other probs as tv is not on the menu in media center.

  Name of the operating system Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  Name of the system
  System manufacturer Dell Inc.
  System model Dimension XPSGEN5
  System Type X 86-based PC
  Processor x 86 Family 15 Model 4 Stepping 3 GenuineIntel ~ 3399 Mhz
  A04 BIOS Version/Date Dell Inc., 29/11/2005
  SMBIOS Version 2.3
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  Username
  U.S. Eastern Standard Time zone
  Total physical memory 048,00 MB 2
  1.31 GB available physical memory
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 3.85 GB
  Paging file C:\pagefile.sys

  Downer on the photos based diskettes. I remember my father having a Sony camera with a floppy drive. I don't know that it seemed like a good idea at the time.

  Your tuner has worked with Media Center? Videos have already played? What format are these videos?

• How to fix my computer told me windows cannot load a system driver reviews being missing or damaged

  How to fix my computer told me windows cannot load a system driver reviews being missing or damaged

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• CD/DVD driver damaged or missing. How to get the new driver?

  After working well for 3 months my CD/DVD drive does not show in my computer.  It appears in Device Manager.  Display properties Drive watch Code 39 driver damaged or missing.  Try to update driver says driver is installed and up-to-date. Said driver driver search comes with Windows 7.  How to get and install a driver right?

  Hello

  Code 39 means that the driver is corrupted or missing.

  -------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7: A cd to dvd device driver I'm missing?

  Excuse me..

  I have problem with win7, the problem is that after the victory to Flash successfully make my bootable flashdisk, then I plug the flashdisk on my 110-3500 HpMini, but after starting Setup win7, a box pops - up and theres something written there that "a required cd/dvd drive device is missing... blah blah..." Is there something wrong with my HpMini? I tried to cancel the program installation and then re insert it to another usb port, but it did not work... Please help me sir... Sorry for my bad English...

  The wireless switch is on the front on the right side in the opposite of the power switch position.

  Windows Dvd installers are much more likely to become corrupt than ISO files or installers of USB. They are not indestructible and are best kept in a DVD box for safekeping.  All it takes is a simple scratch on the label of the DVD side and toast.

  Disc info you provided are identified as a Western Digital Scorpio Black SATA2 320 GB hard drive. What is the product number and the name of the product of your mini?

  Best regards
  ERICO

• Lexmark Z705 not print appropriate color, after installing the driver, error message "Missing entry: ExportOEMDefaults.

  In Vista Home Premium:

  WORD mail MERGE print addresses only in red.

  MUSTEK BearPaw scans and prints only black print in red.

  The latest Vista updates have been removed and a reported error: error in C:\Windows\system32\NVCPL.ddl

  Entry: ExportOEMDefaults

  The latest Lexmark Z705 driver has been loaded.

  http://www.Vistax64.com/Vista-General/120998-c-Windows-System32-nvcpl-DLL.html

  Read the above about your mistake.

  It's to do with the graphics drivers from NVIDIA.

  See you soon.

  Mick Murphy - Microsoft partner

• I lost my CD/DVD (dual drive) from Device Manager on my HP Presario using Win Vista Serv Pac 2 and IE 9.

  Recently, I replaced my hard drive of my laptop HP Presario DV 9718 with Windows Vista. It is a 4 year old laptop, but it's always a good computer. I finished all downloads for updating Windows (some 200 + GB) as well as 2 Pac Serv and IE 9. I lost my CD/DVD (dual drive) and is therefore no longer in Device Manager. Help! My system works great and I downloaded through my print online from HP.com software to complete my installation to work around the CD/DVD missing which prevernted me from the CD of the software running on my printer in my CD/DVD drive. I know it is a malfunction probably related to updates of Windows not supporting the manufacturer of my CD/DVD drive, because it can be manufactured by another company or something to that effect. Anyone have this problem and can guide me through the fix for this problem so I can go in my life and enjoy my Presario completely once more?

  Hello

  1 did you receive an error message?

  2. don't you make changes to your computer?

  I suggest you follow the link and check.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

• BOOT Menu access Tecra R Series

  How the hell you access the BOOT Menu on the Tecra R Series?

  And why it is not documented in the instructions (Toshiba)?

  Thank you

  Hello

  Menu start AFAIK is accessible only if you press F12 at startup.
  Choose the boot device using the up and down arrows and confirm with the button ENTER.

  Check it out.

• Dell Inspiron hard drive has failed. After replacement and re - install Windows Vista, I noticed that the product key sticker is removed, and I can't read it.

  Hard disk of laptop DELL Inspiron my wife is dead! I have replaced the hard drive, but now realize the sticker with the activation of vista is so worn that I can't be a part of the code. Can I do short of buying another license?

  original title: code of Activation of Windows Vista

  If your tile is deleted, unreadable, then you must contact the manufacturer of your computer that is applied on the computer.  They can provide you with information about key details of the product.  -Karena R (Support Engineer)

  Activation of the FAQ

  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

• The update to version 2 of Vitsa fail. Formatted hard drive to purchase the version. need to find the final vista product key

  The update to version 2 of Vitsa fail. Formatted hard drive to purchase the version. need to find the final vista product key

  It should be on a sticker on the box, or on the packaging.

  The product key consisted of 25 digits, divided into 5 groups of 5 digits.

  See you soon...

  Mick Murphy - Microsoft partner

• Driver not Whiz no SE can Instalar Por Ser Incompatible? Tengo Windows 7 Starter

  original title: DRIVER WHIZ No. SE CAN INSTALAR POR SER INCOMPATIBLES?  TENGO WINDOWS 7 STARTER

  DRIVER NOT WHIZ NO SE CAN INSTALAR POR SER CON INCOMPATIBLE WINDOWS 7 STARTER?

  Hi AntonioAlegria,

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

• Tecra A10 Running XP - drive DVD Toshiba - missing Modules

  When running a DVD Toshiba drive on these laptops we get
  "DVD player or the necessary modules for this app is missing." If the application restart does not resolve the problem, please reinstall the application.

  Yes we tried to reinstall - and Yes, we get the same message
  Yes, we can use power DVD and works - but of course there is a cost of license for this software, and we hope to avoid as the Toshiba software should work.

  Laptops were Vista but have been downgraded to XP - all drivers installed e.t.c.

  Anyone got any ideas?

  Hi Bin_Lurchin,

  After you uninstall a Toshiba DVD player, have you tried to clean your windows using CCleaner? Which is a nice tool that removes old keys registry and other unnecessary stuff.
  Check this box!

  Also, I prefer VLC media player for watching movies. Have you tested this tool?

• Tecra S3: Installation of Vista does not recognize the HARD drive

  I try to install Vista Ultimate on my Tecra S3, but installation does not recognize the HARD drive.

  I tried to find the driver for Vista for my computer, but not found RAID.
  Tried it with XP drivers, but no longer works.

  Do you have an idea where I can download Vista drivers for RAID?

  THX

  Hello

  Your suggestion is good. The Tecra S3 supports the RAID, and the RAID driver is required to install the OS on the HARD drive.
  On the European driver Toshiba page I found a RAID for XP driver.

  I put t know if this driver will run under Vista, but I recommend to test.
  The RAID XP 1.3.8.0 driver version can be downloaded from this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Please note; You can store the RAID driver on an external USB and Vista should recognize it!

  Good luck