re-installation of the older printer with OSX10.9

Similar Questions

• Windows cannot print due to a problem with the installation of the current printer.

  Thread title: Epson TX235W will not print

  When I click on 'print', I get the print control. the box that tells the printer how many copies, etc.  When I toast 'print' it get a little box that says Windows cannot print due to a problem with the installation of the current printer.  Try one of the following:

  Check the printer by printing a Windows test page

  Ensure that the printer is online and on

  Reinstall the printer driver

  I did everything above and I get the same result.

  Help!

  Hello

  Did you of recent changes made to your computer that caused the problem?

  This problem is limited to a particular application?

  How is the printer connected?

  Method 1) restart the print spooler service and delete the print queue

  Start the print spooler service in the Services console

  1. Click Start and run, type services.msc, and then click OK.
  2. Right click on the print spooler service, and then click on stop.
  3. Right click on the print spooler service and then click Start.

  Start the spooler service for printing at the command prompt

  1. Click Start, run, type cmd, and then click OK.
  2. Type the following commands at the command prompt:

     net stop spooler
     net start spooler
     Output

  Note: Press ENTER after each command line.

  Cancel printing

  http://Windows.Microsoft.com/en-us/Windows-Vista/cancel-printing

  Method 2) remove and add the printer and then check.

  Add or remove a printer (Applicable for Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  It will be useful.

• Windows 7 cannot print - "Windows cannot print due to a problem with the installation of the current printer"

  Window 7, Lexmark 1300 series. Cannot print. When you try to print from Notepad, the error message is "the system cannot find the file specified." What impression of the word is "Windows cannot print due to a problem with the installation of the current printer" have uninstalled and reinstalled all printers in many times. Removed the Lexmark 1300 in the registry and reinstalled. No change. Ran sfc/scannnow several times. Microsoft Fixit print detected no problems. Help, please.

  Hi Baccy138,

  See the methods mentioned below and check:
  Diagnose and automatically fix the Windows USB problems
  http://support.Microsoft.com/mats/Windows_USB_diagnostics/
   
  Try to download and update the drivers manually from this site:
  http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_Z1300&page=product&FromPage=null#1
  1. click on the above link and click the menu drop down and select Windows.
  2. Select the version of operating system like Windows 7 and check the bit as a result.
  3. Download complete drivers and install it.
   
  Hope this information helps.

• Installation of the normal print cartridges or I have to delete them use later?

  I have a printer HP Officejet 4622 e all-in-one I have implemented successfully.  I just realized that the ink cartridges are 'set up' on them.  Am I supposed to replace these in regular ink cartridges and save cartridges installation for installation later, or just use them upward with a normal printing business?  In addition, I can't adjust the color printing preferences.  Aqua and green appear similar.  Is it possible to adjust the color?  Thank you.

  Use the cartridges installation until they left and then replacing it with the more regular.

• Cannot enable the firewall service in Windows Vista. Prevents the installation of the HP printer software.

  I'm trying to install the HP printing software, but the error message that the firewall must be enabled. However, I'm unable to turn on the firewall. The sytem keeps taking me in circels telling me I can '; t activate the firewall because the service is disabled.

  Anyone have this experience? Suggestions to solve? Thank you!!

  PS: I use VISTA w/SP2
  

  Hello

  How to turn on the firewall enabled or disabled in Vista Windows
  http://www.Vistax64.com/tutorials/92697-Windows-Firewall-off.html

  Check dependencies and their dependencies here:

  http://www.blackviper.com/WinVista/services/Windows_Firewall.htm

  For Services

  Start - type in the search box-> find Services at top - right click - RUN AS ADMIN

  (Means that you can right-click on the command prompt and RUN AS ADMIN).

  ---------------------------------------------------------

  Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
  ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
  who have you ever on it, even if you have uninstalled them. (These leave the remains that can cause some)
  strange questions.)

  Check the default services and dependencies to ensure that they are running.
  http://www.blackviper.com/WinVista/services/Security_Center.htm

  Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

  How to fix Vista Reporting incorrect information Security Center
  http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

  How to disable or enable the Security Center in Vista
  http://www.Vistax64.com/tutorials/67737-Security-Center.html

  This thread might help as it might be a permissions problem.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

  =====================================

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Installation of the label printer.

  I know it sounds like a simple task. But ived tried 1 million different things. Ived contacted IT support in the hospital that I work in. And to make thins worse, it seems that we at the Denmark settle us with a solution that can easily cost us $ 100,000 per year, in the form of standard 10 x more ekspensive solution for each labels we print.
  All because we are not able to choose any label printer.

  So what is the problem?

  When we define a label in the printer driver, it seems that different environments are not able to read these formats.
  We use a program called "BioBank regionernes. Ived tested if excel is able to read the profiles of the label that are made in the pilot.
  He does not receive the rigth from the driver in excel or another format.

  However I can turn the printer of labels in the standard printer, and which seems to solve the problem of extracting the parameters defined by the pilot, in the external environment. But printing A4 format is seriously impaired when I do.
  Support IT says that it must change the "standard printer' whenever we chose to go the printer of labels to a regular printer or vice versa.

  Help, please. should be VERY simple. but it is a headache ived have more than a month now.

  Hello

  Thanks for posting your question on the Microsoft Forum.

  I suggest you to ask your question in the TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking&filter=AllTypes&sort=lastpostdesc

  TechNet is watched by other computing professionals who would be more likely to help you.

  I hope this helps.

  _______________

  Thank you best regards &,.

  Isha Soni

• My camera has reached 9999 photos and started renumbering 0001 but in a different folder.  If I import new photos in iPhoto, the older photos with the same numbers are overwritten?

  My camera is renumbering pictures from 0001, but a new camera case.  If I import new photos in iPhoto, they replace the old photos with the same numbers?  The camera knows that they are in a different folder, but what happens when I import into iPhoto?

  iPHoto manages very well duplicate file names - each import is in another folder in the database - no problem

  LN

• Error blocks the installation of the HP printer driver: slbcsp.dll sccbase.dll, gpkcsp.dll, and Enum.

  Original title: installing software with Vista Home Premium HP printer successfully, but does not using Vista Ultimate operating systems in a Dell computer.

  I am trying to install the HP software for the printer all-in-one HP Photosmart 3310 my new Dell 'renovated' which has Vista Ultimate operating system. This software worked on my last replacement of Dell 'renovated' who had the Vista Home Premium operating sytem but will not install with Ultimate.
  I get a message that what follows is blocking the installation:
  Slbcsp.dll
  Sccbase.dll
  Gpkcsp.dll
  Enum
  Any help would be appreciated. Thank you.
  Pequeno Penny

  Try these methods to solve the problem.

  Method 1: Re-register the following .dll files

   

  a. Click Start, and then click on run

  (b) in the Open box, type cmd, and then click OK.

  c. the prompt, type the following lines, pressing ENTER after each line:

  § regsvr32 slbcsp.dll

  § regsvr32 gpkcsp.dll

  § regsvr32 sccbase.dll

  d. click OK the message DllRegisterServer in filename succeeded.

  e. Type Exit, and then press ENTER.

  Method 2:

  Prior to remedial action, ensure that there is only one copy of slbcsp.dll sccbase.dll files in your C:\Windows\System32 folder. Create the following two subkeys:

  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography\Defaults\Provider\Schlumberger
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography | Defaults\Provider\Infineon

  To do this, follow these steps:

   

  a. go to the start menu and click Run.

  b. type regedit in the Open box, and then press ENTER.

  c. find the following registry key
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography | Defaults\Provider

  d. Select the provider key.

  e. then, click the Edit menu in the Registry Editor window, select new and then click key.

  f. name the new key as Schlumberger cryptographic service provider.

  g. Repeat steps d and e. This time, name the new key as Infineon SICRYPT Base Smart Card CSP.

  h. then select the first key that you created, which is the Schlumberger cryptographic service provider.

  i. now, right-click on an empty area in the right pane of the Registry Editor window, select new, and then click String value.

  j. right click on the new string value that you created, click Rename, and then rename the Image path value.

  k now, right click on the string value, path of the Image and click on edit in the box under value data write C:\WINDOWS\system32\slbcsp.dll.

  l. click OK.

  Mr. then select key Infineon SICRYPT Base Smart Card CSP.

  n. Repeat step i and j.

  o then, right-click the string value, path of the Image and click on edit in the box under value data write C:\WINDOWS\system32\sccbase.dll.

  p., click OK.

  q. even once, select the key from the Service Provider Schlumberger cryptographic.

  a. right-click on an empty area in the right pane of the Registry Editor window, select new, then click DWORD value and rename it to SigInFile.

  s. again, right-click on an empty area in the right pane, select new, then click DWORD value and rename the value type.

  t. then, right-click on the value Type, select Edit, and in the box under value data, type 1. You can select hexadecimal or decimal Base.

  u. click OK.

  v. then select Infineon SICRYPT Base Smart Card CSP key in the left pane of the Registry Editor window.

  w. repeat r, s and t.

  x. click OK.

  See how it goes.

  Regarding enum error, see the steps in this link: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-and/Photostmart-C4400-Problem-Enum/m-p/88615

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• All-in-one Officejet Pro 6830: INSTALLATION of the OFFICEJET PRINTER

  I had already set up my printer when I had last year. A few weeks ago, my printer was unplugged, when I connected again, wanting to be set up again. He won't go beyond the screen 'Configuration of the cartridges' because he wants than that it came with that I don't have. Why is there need to put in place again and what can I do about it?

  Hey @britb,

  Welcome to the Forums of HP Support!

  I understand that printer e-all-in-one Officejet 6830 asking cartridges SETUP. For this problem, contact HP support. You can do this by clicking on this link and fill in the form below.

  Please let me know if you are able to resolve your problem after contacting HP Support. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Desktop installation after the download.  With the help of Windows 10

  I have updated to OS Windows 10, instructed to download and install the desktop application.  I downloaded it 6 times, and although the installation starts, he stops, leaves the program and told me I will tell you when a fix is available.  However, all the support that there is no problem of compatibility. What Miss me?

  Hello

  This happens when there are some folders associated with creative cloud apps still in the machine, please see the instructions below and clean remove creative cloud desktop application and reinstall:

  (1) uninstall Creative Cloud Desktop Manager:

  Using creative cloud | Uninstall the creative cloud desktop application

  (2) remove the rest of the files:

  C:\Program Files (x 86) \Common Files\Adobe\OOBE

  C:\Program Files (x 86) \Common Files\Adobe\Adobe Application Manager

  C:\Program Files (x 86) \Adobe\Creative Cloud files

  C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE {to view the hidden AppData folder, files, folders, file name extensions see see |} {Windows XP, Vista, Windows 7.}

  Cleaning tool 3 - run Adobe: http://download.macromedia.com/SupportTools/Cleaner/win/AdobeCreativeCloudCleanerTool.exe

  4 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Let us know if this was helpful.

  Kind regards

  Bani

• Why is adobe requiring installation of the McAfee software with the latest updates?

  I got my normal notice of update for Adobe acrobat.  However, during installation it tells me it is also installing McAfee anti-virus software.  I want not any McAfee program on my computer, never!  There is no indication until installation is in progress, you are demanding this facility, no way to deselect, and frankly, McAfee is a pain to remove any computer and does not play well with I'm forced to use software specific industry.  WHAT THE * #))! _ Adobe plays here?

  If you have Acrobat, rather than the free Adobe Reader, there is no offer of Macafee, as far as I know; you have been scammed.

  If you have the free player you can disable it with an option like this:

  

  But if you don't that I strongly suspect a scam. There are a lot of fake Player updates out there and I would be more concerned about things, it does not mention...

• installation of the TCS 5 with SC 6 is installed on Win 7

  Windows 7 64 bit with 8 GB RAM i5

  I downloaded archive installation TC 5 and wonder if my CS6 will be affected because it uses Acrobat X.

  TCS5 Acrobat XI with the new version of Distiller for FM, will this cause problems with CS6 applications that use Distiller to Acrobat X?

  I remember that several versions of Acrobat Pro is not supported.

  Anyone in the same situation?

  You may be able to install x and xi of acrobat, but if you have a problem, uninstall acrobat x and reinstall xi, if necessary.

• the button "print" with Win8.1 in all pages do not work, only blank papers

  Many web pages contain a button print to print content. Since the upgrade to win 8.1 these buttons no longer work. in other browsers works on the same pages.

  I noticed that you wrote 'only the empty papers' in your question. Have you seen this support article: troubleshoot printing in Firefox?

• I need emlarge the words printed with Firefox?

  bold text I need to enlarge the words to read.

  If you are on Windows 7, in the upper left corner of your Firefox window should be the word Firefox, that displays a drop-down list. In this list, click Options. That should open a new window with several tabs, which will be content. A click on that and you will see the parameters described.

• installation of the older version of PC games

  What is a PC game that made for 95/98 by the OS installed and played in windows 7?

  Probably not. If you run Windows 7 Home Basic Edition, Starter or Home Premium, you can upgrade to professional Windows so that you can run these games through Windows XP Mode or consider Windows XP in a dual-boot with Windows 7 configuration and use your games in XP, when you play them.

  Windows XP Mode and Windows Virtual PC
  http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

  Windows XP Mode now accessible to more than PC
  http://windowsteamblog.com/blogs/Windows7/default.aspx

  Get started with Windows Virtual PC
  http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP