Re: Installation of vista to the NB200

Similar Questions

• Where are the installation of Vista on the recovery partition files stored?

  Where are the real Vista installation files stored on the recovery partition? If it helps I have a Compaq Presario SR5601UK. They are all stored in a folder or are they distributed? A quick dir at the command prompt, the only way you can access the files :-(, revealed a large amount of .wim files, mainly in "preload", but none on about 100 MB in size. I just assumed that HP uses the real Vista installation process, just gives their graphical front-end and adds some garbage in. If he does not tell everything.

  Anon, they all are on partition D: and no, this isn't a hidden Vista copy. It is integrated with the HP software. This is also why you cannot repair Vista unless you have a retail copy. Other you need to perform a restore.

• Installation of Vista on the powerful Qosmio

  today I received my Qosmio back for a repair under warranty (dead pixels), a fast and wonderful repair that you expect from Toshiba.

  I decided to give Vista a spin and see how things were going, install went ok ish (locked at the 1st attempt) managed to get vista on ok at the 2nd go.

  After sting I find sound does not work (no drivers available) and an unknown device that no mater what I try I can't know what it is. AVG is not compatible with VISTA (not the fault of toshis), no matter what microsoft and AVG say hehehe the fancy new blocks of security, to install because of the incompatibility.

  then after a reboot, I get a BSOD (sound driver and associated graphics), then a second knock on the door with a laptop advent nice (ewwwww!) and then is produced to show me what beautiful VISTA!

  a system that works perfectly with her beau / graphics and aero race.

  How sick I am hehehehe

  Come on Tosh, young puppies are beat you to the punch.

  Advent is still not in the same League and I already have a system that works on vista and is stable and the operating system is not even finished yet hehehehe.

  Oh well back to XP MCE LOL

  the Qosmio is still great, but the beast Shouldn't ingest VISTA now.

  have fun guys.

  Yes, I believe that the Qosmio is definitely Vista capable and I think, in February 2007, we will get Vista drivers.

• Installation of Vista on the new hard drive was interrupted, and now I can not start the computer

  So I decided that I need a bigger hard drive. I got a 500 GB hard drive, so I have it PLOPPED in my Acer Aspire 5517 with my vista boot drive, turned on and began to go through the process. Once he got to the phase 'installation complete' it seems to take a while, so I let it run all night. Once I got up, it was on a black screen with the mouse, I let stand a few more minutes but still nothing. I turned off and started it expects to find to return at the beginning of the installation, but instead he began to start from what is on the hard drive at this time. It got to the screen with the loading bar and the sign 'Microsoft Corporation'. The loading bar was very frigidity and stopped and started randomly. I let it do this while I went to school, but when I got home, it was always the same loading screen. I rebooted and tried to start in safe mode, but when I do it it stops at crcdisk.sys, and never forwarded charges. I tried to do the reset thing factory start it but that doesn't seem to work. My other puny hard drive still works, but the other does not. I searched the internet but have not seen any other problem like it. I want to just start completely clean of my new 500 GB. Please help!

  Hi James,

  1. What is the number of brand and model of the hard disk of 500 GB?

  2. How did the 500 GB hard drive connected to the computer? It is external or internal?

  To troubleshoot the unable to start the issue to cause corrupted driver, some files that can not be loaded during the startup process must be fixed or restored. So, let's check the disk by using the Windows Recovery Console.

  (a) put the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD ".

  (c) select a language, a time, a currency and a keyboard or another input method, and then click Next.

  (d) click on repair your computer.

  (e) (click on the operating system you want to repair), and then click Next.

  (f) in the System Recovery Options dialog box, click command prompt. Type chkdsk c:/f to try to correct the errors.

  (g) Note: answer them when chkdsk asks you if you want to check the disk next boot Vista

  (h) after the recording of the disc, and then run sfc/scannow to check the corruption of system files.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Check out TechNet help links and check if that helps:

  The computer starts stops at crcdisk.sys

  Help! Vista won't start... (crcdisk.sys)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Installation of Vista on the new hard drive.

  Recently, the hard drive (Seagate Barracuda 7200.11 750Go) in my HP Pavilion Elite M9350F Desktop has failed.

  I replaced today by a Western Digital Caviar Green WD10EADX 1 TB harddrive.

  After the removal of the old hard drive and the installation of the new, I tried to install Windows vista on it.

  While in the window select a driver to install, I get this message

  "A required CD/DVD drive device driver is missing. If you have a driver floppy, CD, DVD, or USB Flash Drive please insert it now. »

  Followed by this error message when I perform a new crawl for drivers.

  "No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK. »

  I don't know what to do to fix this error.

  I also ran a report diaognostics and the disk is healthy, but I get error BIOHD-3.

  * Note: I've already been on the Western Digital site and they describe it as either an error with the computer itself, or the hard drive has failed, which I do not have to be the case since I bought it today.

  Two SATA drivers I posted above (from your page drivers)-choose which is right for your installation. One is for Vista 32 bit, the other is for Vista 64-bit. Use something like the free 7Zip to extract the files to a folder. Place the files on a flash drive and when the message arrives you need the driver cd/dvd insert the flash drive.

  I didn't need or used this procedure personally, but it seemed to work for others.

• Installation of Vista on the new disk HARD of DVDs of resettlement

  Hello!

  Is it possible to use the reinstallation of Windows came with my Dell laptop DVD to install Windows on a new HARD drive for the same computer laptop?  I didn't upgrade the HARD drive of my laptop for something newer, bigger and faster, but I want to assure you that I will be able to use the reinstall DVD before investing in the new HARD drive.  I have not been able to develop a response straight yes or no from the comments I've seen online (something on the DVD works only with the original Dell hardware?).

  Here's my laptop specs:

  -Model: Dell XPS m1330

  -Age: 4.5 years

  -OS: Windows Vista Home Premium 32 bit (I have reinstallation DVD provided with the laptop - one marked "already installed on your computer" - as well as the Dell drivers and utilities CD)

  -Material: All material is as I received Dell - I did Exchange something out.

  Thanks in advance for your understanding!

  Mariko

  Resettlement is precisely what this DVD is for.  Dell offers a page of links to help owners restore their computers here: restore and reinstall Windows on a Dell computer.  For a blank hard drive, you must go to step 4: manual reinstallation.  Forum member Natakuc4 has written some pages with lots of additional information that might be useful, found here: install clean windows.

  It is also possible to clone your existing HDD to shorten the time required to restore your computer, but with a laptop, need you also a shell of USB external hard drive.  I can't speak for all providers, but I know that Seagate and Western Digital offer a free version of Acronis True Image on their web pages to the owners of their hard drives.  This application allows you to transfer an image of your existing hard drive to a new hard drive in less than an hour (usually - depends on how much is on the discs).

• Software bundle after a new installation of Vista on the Satellite X 200-245

  Hello

  where can I find Ulead moviewriter for toshiba, creator of disk from toshiba, toshiba system and chicony camera assistant software speech synthesis when the partition hidden, used for re install software is (accidentally) deleted on a satellite X 200-245?

  Thank you
  Kiwi.

  Hello

  You have received the Toshiba Recovery CD. Right?
  On this recovery CD, you will find the image of Toshiba.
  It is a package that contains the OS, drivers Toshiba, tools and additional software.

  Just says that the recovery CD supports all applications that are / have been preinstalled on your laptop.
  You have to boot from the recovery CD and the laptop will be set to the factory settings.
  This means that you will get all THE programs that were pre-installed at the beginning!

  So, I wonder were the problem is?  :|

• How to uninstall a different installation of Vista

  I created a second installation of Vist 64 on my computer and now I want to remove it. How di I do that?

  Hello

  ·        Have you installed the second installation of vista in the different hard drive or the same hard drive?

  ·        In which partition you installed the second operating system vista you want to delete the system?

  ·        What is the other

  I suggest that you remove the boot sequence for the system and then manually delete the system files. Follow the steps mentioned below to remove the boot sequence.

  a. click on Start menu and type msconfig in the start search box and press on enter.

  b. click on the Startup tab and click on the operating system of vista you don't want on the system and click on the button Delete.

  Note: Make sure before you delete the boot entry of the operating system it is the operating system that youwant to remove the system.

  c. now the operating system will be removed from the boot sequence.

  d. now restart the computer and boot to the desktop and go to the drive where the vista 64-bit operating system is installed.

  e. remove the files that are present in the disk manually to completely remove the operating system.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro A300 - how to access the installation of Vista hidden partition?

  AHOY!

  I have a Satellite Pro A300 PSAGDA 2000R

  It had Windows Vista installed when I got it, but after a while, had to reformat, so I did, (I want to reformat my computer every 6-12 months on average), it came only with XP disks even if he got a serial number for Vista on the underside of the laptop so I installed XP. That was about 2-3 reformats there now.

  However, so that finding drivers I've seen mention of a hidden partition to reinstall Vista (which I hope it is 64-bit) and tried to do this several times but unfortunately it does not work, I guess that maybe what XP installation I can accidentally deleted or something? (Thought they had in fact on some solid state memory which could not be written more or something.)

  * Is there a way I can access it, take another that won't cost a ridiculous amount (for example download) or a nice person enough to create an image to download on a site or something that I can download file sharing? *

  I have also a spare copy of Vista (and a bit of XP) on the drive, none of them will work?

  + Another thing which I am interested in is can I get any of the preview of Windows 8 OS that will run on this laptop? Apparently it improved performance on Vista and W7 would be convenient for running on a laptop, and I have also heard say it is possible to upgrade to the full version of the preview or W7 for a minimal cost and would probably be much cheaper than other methods if possible. +

  And I'm actually quite handy with computers, so don't be afraid to throw big words at me,

  (Tried the methods found on the manual on page 3-8 ([link: http://www.mytoshiba.com.au/support/computers/satellite/pro/a300/psagda-02000r/download?os=22]).)

  I have European A300 and I believe that the principle on the rest of the same models.
  A300 was offered with Vista preinstalled but without recovery disc Vista. Image that contains the operating system, drivers, tools and utilities for recovery has been saved on the HARD drive and with book factory owner was able to begin the installation of HARD drive recovery. It works with the factory only settings.

  With preinstalled Toshiba laptop recovery disk creator owners have been able to create the recovery disk that can be used if the disk HARD recovery doesn't work anymore.
  If you don t have access to this image saved on HARD drive recovery, you must use the recovery disc. If you don t have the disc that you have a problem. Recovery image can not be downloaded. All you can download are the unique rivers, tools and utilities that you can use if you install a clean version of the OS (operating system).
  On the European models, recovery image was recorded on the second partition of HARD drive in the folder called HDDrecovery.

  Anyway, A300 works with Win7 32 bit. I installed it on my machine and I m very happy with it.
  > Another thing which I am interested in is can I get any of the preview of Windows 8 OS that will run on this laptop?
  I put t know who should give you this overview, but the fact is that you get it from Toshiba. You should check if you can get it in another way.

• Tecra S3: Installation of Vista does not recognize the HARD drive

  I try to install Vista Ultimate on my Tecra S3, but installation does not recognize the HARD drive.

  I tried to find the driver for Vista for my computer, but not found RAID.
  Tried it with XP drivers, but no longer works.

  Do you have an idea where I can download Vista drivers for RAID?

  THX

  Hello

  Your suggestion is good. The Tecra S3 supports the RAID, and the RAID driver is required to install the OS on the HARD drive.
  On the European driver Toshiba page I found a RAID for XP driver.

  I put t know if this driver will run under Vista, but I recommend to test.
  The RAID XP 1.3.8.0 driver version can be downloaded from this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Please note; You can store the RAID driver on an external USB and Vista should recognize it!

  Good luck

• How to get the Installation of Vista from Toshiba disk?

  I work with Microsoft technical support to solve a security problem on my Satellite Pro A210 and were now required to use a Vista installation disc.

  Microsoft says that I am entitled to an installation of the original provider of my kit disc - Toshiba. But we're not happened with my laptop - only a recovery disc has been provided.

  How can I go on the acquisition of an installation of Vista from Toshiba disk?

  Kind regards

  Kevin C.

  With Toshiba laptop, you'll get the Toshiba CD/DVD facilities only.
  This recovery media is designed for your laptop only.

  Installations from Microsoft Vista disc is not given and there is no way to get it from Toshiba.

  Microsoft can offer that you support if you only use Microsoft installations CD. Using this disk, you can install and repair Vista on each portable office/computer option. Unfortunately with the restore disc it will not work.

• Satellite P300 - 18 M; The clean installation of Vista Ultimate failed

  Hello everyone,

  I recently bought a Toshiba Satellite P300 - 18M. Now, I want to install Vista Ultimate on a totally clean system. The installation runs, but at the final stage (end), which takes about 2 hours, the screen becomes black with just the mouse showing pointer. I sometimes triep to leave from one day to the next day, she who does not help.
  Anyone who has ever heard of this problem and knows how to solve? If all goes well...

  Greetings.

  Never heard of this issue, but it would be interesting to know if you can restore the laptop using the recovery disk Toshiba of origin.
  It work?

  By the way; Did you include the SATA drivers before starting the installation of Vista?

• Can I use product key OEM Portege R400 - S4832 to the re-installation of Vista

  If I don't have my restore DVD came with my laptop Portege R400-S4832 I use an other users Vista OS DVD to install Vista using the product key that came on the bottom of my Portege?

  Otherwise, it's a hassle to ask a Toshiba Recovery DVD?

  Thank you.

  Well, what to say to my knowledge it of not possible to activate the other version of Vista with OEM from Toshiba key.
  This key is assigned to this OEM version and it should not work with another Vista CD/DVD.

  However, I found this thread another in this forum about Vista installation and activation and the last user potatohead reported that he was able to activate the OEM of Vista version with the phone;

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=28340&TSTART=0

  It's very interesting but for me really amazing. In any case, it s worth a try.
  If you get more information from Microsoft, please post it here.

  You would be really appreciated your comments.

  Good bye

• Satellite A100 PSAA9A: Cannot use fingerprint & keys Fn after the new installation of Vista

  Hello

  I am currently using toshiba A100 PSAA9A initially running a winxp pro sp2.
  But recently I received a window Vista on the other computer manufacturing so I reformat and installed.

  But after the installation, I checked all driver devices and they are all installed correctly.
  But I can't use fingerprints, as well as the shortcut key by pressing Fn more

  does anyone have a solution to this?
  Thank you very much

  Thanks for the info

• Satellite P100-102 works badly since the installation of Vista

  Hello!

  I installed Windows Vista on my Toshiba p100-102 (A3E) but I had a 'small' problem. In each 3D app, I had a lot of shifts and slowdowns. I think it's a problem with the graphics card and I think the grapics card fan works slow since installing vista. Thus it reduces the mhz for a few moments (1 minute at) (I think, I'm not shure)

  so... anyone have any idea what I can do? Maybe should I use an alternativ graphics driver?

  SRY for my bad English = /.

  Oxford

  Hello

  did you properly installed all the drivers for your system? It s absoulutely necessary that everything is correctly installed and configured.
  Another thing is: Joanie to install the latest version of the bios, because I had a problem with my Satellite A100 after installation of Vista and I was able to solve it with my bios update.

  Regarding the graphics drivers, I can give you some links that might help you with your performance problems:

  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  Try these links and you will find drivers for your VGA. And please look carefully, a lot of people I have given the link tell me that they don t find anything, but the drivers are there.

  Welcome them