Re: Problem of password BIOS on Satellite series

Similar Questions

• Can't remove password BIOS on Satellite 3000-504

  Hello

  I erased the password BIOS Toshiba Satellite 3000-504 upgrade the BIOS on this computer. So I went to the BIOS > entered the old password > enterd twice (input x 2) empty new password and after that I reset computer.

  After computer restart once again was asked to provide the password, but the old password and empty password was not correct. And now I can't get into BIOS and boot the computer.

  Any suggestions, what happened and what can I do now?

  Concerning
  Lukasz

  I put t know what was coming, but we're not sure: you have big problem now. If please contact allowed in your country and allow them to remove the BIOS password. It will cost you, but unfortunately, you have no choice.

• Can I update the BIOS for Satellite series C50 - A?

  OF THE C50 BIOS - UPDATE OF THE SATELLITE SERIES
  TO DO THIS OR NOT

  ACCORDING TO TOSHIBA STATION

  DO NOT INSTALL

  THAN THE ONE THAT I CHOSE

  Toshiba service station informs you of new updates published on the page of the Toshiba UE driver.
  But it's not ' invitation to perform this update. It is only a notification.

  However, I think that if your laptop works pretty well, the update is not very necessary.

• Problems of updating BIOS on Satellite L40 - 15G

  Good afternoon.

  I have Toshiba Satellite L40 - 15G and I want to put 4 GB of ram (2 x 2).
  It works with 3 GB but with 4 GB it just does not start - gives me a blue screen.

  I read on the internet and discovered that I have to update my BIOS (my version curent is 1.60).
  I have vista 32 bit. I also tried to do the update via the site of toshiba, but without success.
  I am running the .exe file, but when I restart the computer I have the same version.

  What should I do?

  In the hope of a response.
  Pedro

  Hello

  I think you are using an incorrect BIOS.
  Satellite L40 - 15 G seems to belong to the series of PSL48E

  Check again!

  Toshiba Europe page provides a BIOS 2, 00-VICTORY for Vista and WIN-5, 50 for Win XP

  Regarding the upgrade of memory:
  I don't know if your laptop would be m supports 4 GB of RAM. Is that there are different models of L40 and some models supports only 2 GB of RAM!

  Your L40 - 15 G seems to use the Mobile Intel GL960 Express Chipset...
  Check out the details on the Intel page which RAM max can be managed by the Intel GL960 Express Chipset.

• How can I change/remove password BIOS on Satellite A300?

  I have a satellite A300-1BZ running Windows vista Home premium. For some reason, there intermittentlystarted requesting a password of BIOS or boot when I turn on. I have never put this password myself and have no idea how or where to look to remove it.

  I can turn on if I remove the battery without asking for the password, but if I shut off and turn on again, then it asks again. Advice apprecieated.

  Thank you.
  Chris

  The history is somewhat strange. Cannot set password BIOS only.
  Is anyone else using your laptop?

  > I can light up if I remove the battery without asking for the password, but if I shut off and turn on again, then it asks again.
  To be honest I don t understand this. If you just understand that you can use your laptop and bypass the BIOS password if you turn the notebook on power only, right?
  But with the battery inside it start and ask BIOS password?

• I do not know password BIOS for Satellite A100-528 PSAA2E

  Hello.. I have a problem...

  I have a laptop Toshiba SATELLITE A100-528 PSAA2E-01H00WGE...
  the problem is that I downloaded toshiba HW setup and I accidentally put a password...
  not a password... it's propably supervisor password or bios password...

  .the thing is that I don't know what the boot is... i password my PC and it doesn't let me do windows if I don't type the password... y at - it a way to remove the password?

  It won't let me either start from a cd or usb... I press F12 to choose to boot from the cd or usb, but it's still request the password unknown... is there a solution?

  Please answer it is essential!
  Thank you very much...

  > the problem is that I downloaded toshiba HW setup and I accidentally put a password...
  > .not a password... it's propably supervisor password or bios password...

  That s funny because the BIOS password or contractor may be reset by an authorized service provider.
  The BIOS password is a high security option that can not easily be reset.
  Then ONLY ASP can remove a UNKNOWN password.

• Password BIOS for Satellite M30X 122

  Hi all!

  I have a small problem:
  Unfortunately, there is a BIOS password on my laptop. I bought the phone two months ago and I don't remember that I never put a password. He must have been there since the beginning. Now, I want to remove the password and set another. Can someone tell me the password for her backdoor? I know that there is a.

  Thanks in advance!

  Carsten

  Hello

  Unfortunately there is no backdoor password for bios, if there is a password the only way to get unregustered to take it to an ASP so that they can just reset the password.

  Sorry :(

• How to remove bios password BIOS on Satellite Pro M30

  How to remove the password of BIOS on Toshiba Satellite Pro M30

  Post edited by: Admin

  I'm afraid to tell you, but to do this, you will need to contact local ASP.
  Because it's not easy or possible how you would do this on deskopt PCs.

  That's why you have to take your ASP. Guys it can remove the password.

• How can I reset password BIOS on Satellite Pro M30?

  Hello!

  I have a portable Satellite Pro M30 and my son has changed my bios password and now I can't even start it! How can I reset the bios? Where is the bios battery out of MB, then reset as in desktop? Is there a jumper for the deal if all else fails? What should I try?

  Thank you all in advance.

  John.

  Hello John

  Remove the CMOS battery didn't help much. If the removal of the BIOS can be so easy, remove the password on the stolen units may be too simple. Please don? t wait that these information will be posted here.

  You can contact the after-sales Service of Toshiba partner. They will remove password for you.

  Good luck!

• How to remove password BIOS on Satellite C50 - B - 14 d?

  Hello

  My daughter was playing with his cell phone and decided to install a BIOS password, knows she cant remember this password, I removed the battery and left aside for a week hoping it would reset the password blank but not joy.

  the model is Satellite C50 - B - 14 d

  is there anyway to reset the BIOS password? She is really missing his laptop

  Thank you very much

  Posted by tech
  

  is there anyway to reset the BIOS password?

  BIOS password is characteristic of very important security and the methods and means how to remove it can be themed on the public forum.
  Every stolen laptop could be 'unlocked' so this theme is "dangerous."

  Anyway, what you can do is to contact the nearest Toshiba service provider and ask for help. They can cancel BIOS password for you.

• Compaq mini 110: problem of password bios compaq mini 110

  I have compaq mini 110 .my problem bios password is not

  the messsage CNU9249P6X screen?

  WHAT İS THE BİOS PASSWORD? HELP ME THANKS

  Hello

  Enter: e9lo7vo2g4 (to be noted that in both cases, the 3rd character is a lowercase L)

  or
                e9lo7vo2gr

  Kind regards

  DP - K

• Problem of updating BIOS on Satellite Z30-A-12R

  Hello
  I have a problem when you try to update the BIOS of my A-Z30-12R.
  I currently installed version 2.6 of the bios. My computer had to be reformatted and all programs re-installed. When reinstalling the utility the ECO utility could not be installed due to the incompatibility with the version of the bios that I use.
  When you try to update the bios, the new version is 4.2, but trying to download it and apply it, it says that my computer is not supported.
  Is it possible to update the bios? Why I have a problem with the new version?
  Thanks for your help.

  If you have Win7: install Toshiba Value added Package.
  If you have Win8/10: install the driver of Toshiba system and system settings.

• Update problem 6.70 BIOS with Satellite Pro C850-172

  I have two problems with the update the BIOS (the 1 is more important then the 2nd one):

  1. in the attempt to install the BIOS Update 6.70 - WIN (29/11/13) it is said that:
  "The version of the ROM file is the same as that of the BIOS.
  and it stops. In the DOS window, it shows a sentence:
  "NOT 8 platform Windows, using Windows 7 update... ».
  I use Windows 7 Home Premium 64 bit system but recently there has been an important automatic update done for her.
  I'm lost. I can do to update the BIOS?

  2. at the beginning, he says that Flash process will be terminated and I need to "contact the OEM BIOS engineer to add the location of NV storage by interface HISII". But if I want to risk I can continue etc.

  Previously, I took the risk and the update went well.
  But is it possible to contact BIOS OEM engieneer?

  Hello

  > When you attempt to install the BIOS Update 6.70 - WIN (29/11/13) it is said that:
  > "The version of the ROM file is the same as that of the BIOS.

  What is the current version of BIOS that is on your laptop?
  If the BIOS is already up-to-date, the BIOS flash process will be interrupted.

  > «NOT 8 platform Windows, using Windows 7 update...» ».
  I'm not quite sure about the meaning of this information, but it looks like the BIOS update was released for Windows 8 system and probably his need to improve the system from Windows 7 to Windows 8 to be able to Flash the BIOS m

  By the way: why you want to update the BIOS? Just because the new version is available?
  Please note that the update of the BIOS does not improve the performance of the laptop, but fixes some problems. In case your laptop runs successfully, the update of the BIOS is not very important

• Problem after update bios on Satellite L505-144

  Hi all

  New here, but I know I'll be in the right place.

  I recently installed some updates, such as suggested by temppro. Now whenever my compy starts in Windows 7 64 bit, I get the following message.

  RunDLL
  There was a problem starting C:\Users\Ems and Swift\AppData\Local\prtwst.dll

  The specified module could not be found.

  I post the picture of it, but I don't know how to paste the picture.

  If someone could give me an idea what to do, I'd be really grateful the help... I tried to re - install the bios and by removing other updates... But still this msg appears...

  Thanks in advance

  Paul

  Post edited by: kochney

  just a quick note, everything seems to work fine, just this error msg, which made my nut in :D

  Hello

  Seems that the app is loading at the beginning that creates this message.
  You should check the msconfing (in RUN type msconfig and go to the Startup tab)
  There, you can check what applications are mentioned.

  You can also try to clean the registry with CCleaner. This tool is free and scans the registry and removes garbage from registry

• Problems after update BIOS on Satellite Pro 4600

  There is a problem with the computer toshiba laptop. its the fact do not install any windows OS after the Installer starts running xp there is an error message that says that the drivers of setupdd.sys could not be loaded (error code 14)

  I tried with different CDs with the same error, so I tried the procedure of the ghost image, but all in vain after reboot it is with an error that requires a kernel dll could not be found that I even used a cool ghost image but the same error.

  In fact, I upgraded the bios to a worm recent 2.60 it was beautiful, he started twice and has been used for several hours. the update was suuccesful up and running. It all started when we placed a kingston flash drive in the USB after it was working very well we copied a simple document on drive d, nothing else, it worked for half an hour. After I stopped, and then it was late at night when I started the system fine.i was listening to a song after that, he displayed the error messge system32 driver pci.sys damaged or missed.

  Then I tried everything I knew in windows xp to boot with xp cd and... etc I also formatted the hard drive to try to win98 installation gave an error also, external error to msdos, I think it's the update of the bios that is problem because windows 2000 Professional installation gave a very specific error. BIOS not fully ACPI compatible after pressing F7 in the installer of windows xp the feature ACPI went silent and requested installation good, but during the formatting the drive but it stopped with an error that the disc hard cannot be formatted.

  It's a week now. you have the previous bios file with you maybe which would solve the problem or other.
  Please guide me. I went on toshibas website 25 - 30 times but they do not have the previous bios except the last ver2.60 file

  Hi Usman

  The problem is that you can't roll back BIOS to the previous version. Just service partner chartered Toshiba for this special tool.

  Check it please this document. I have gift? t know if this can help, but perhaps you can better understand the problem http://support.microsoft.com/?kbid=330181

  Good luck!