Re: Qosmio F50-10 b Blutooth does not

Similar Questions

• Qosmio F50 - 10 M: Webcam does not work

  Hello

  I had the problem that my webcam is no longer operational.

  Sometimes, it is accessible, others do not.
  Most of the time it is not detected by the system.

  Install the old drivers does not resolve the problem only for a while that the system seems to forget those.

  Do you have an idea for me?

  Best regards
  Your Tom

  Post edited by: Starmind_1 that I forgot to post a good topic

  Hello

  You mean that sometimes, the installation of the webcam software allows to get the webcam working again? Hmm that would mean this isn't problem webcam hardware.
  Maybe your system is confused or there is other installed software causing problems with webcam

  You use software like facial recognition or Skype?
  If Yes, this software access using the webcam too so it could be a problem between these parts of software

  Recommend that you uninstall such software and install only the webcam software

  If this does no good, maybe, you must use the Toshiba Recovery disk to fix this

• Qosmio G30-155: video Capture does not work using s-video in port

  Toshiba Qosmio G30-155 video capture does not work via the ports of the video (Windows Vista Ultimate x 86) victory of version 3.90 BIOS
  Video capture does not work in Windows Media Center, even if selected as ports of entry port composite or s-video in Windows Media Center settings.

  In the BIOS version 3.90 parameters via esc - F1 can only select this option: NTSC (USA), NTSC (Japan), PAL (S-video).

  It is worth noting that the laptop is supposed to be capture NTSC for composite input mode

  Someone turned to make this model of video capture for laptop, via composite video input with the new version of the BIOS (version 3.90 win)?

  Can you please explain what you want to do exactly?

  Many years ago I had this old Qosmio with TV tuner and antenna in port so I used it to transfer my old VHS format videos and burn movie DVDs.

  To this end, I didn't use Windows Media Center. Why you n t use other recording applications. I think that everyone is better than Windows Media Center.

• Qosmio F50 - 10K - multimedia keys are not lit

  According to my topic

  "" Qosmio F50 - 10K - replaced by Qosmio F60-126? ".
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59934&TSTART=0

  I had problems with my laptop, located at the Nvidia 9600 M GT graphics according to Toshiba service. They changed the graphics card with a new one today and so far everything is going very well and smooth. He collapsed again. Time will tell whether or not it returns to his old ways.

  In any case, after I took up my F50 - 10K I noticed that the indicators for media buttons (Play / Pause, Stop, Dolby, etc) are not lit. The buttons work fine, but they are not on. All other indicators (the light bar on the touchpad, the volume light) and the power light work fine. There is a button to deactivate/activate the indicators, but it does not work for media indicators.

  Before giving my laptop to the service of all the indicators were at work. Now, the indicators of media came out. No idea how to re-enable?

  Hi Jwrath,

  I doubt s a hardware problem because they do not work properly and the lit / functions are controlled by added value package. In your case, I recommend reinstall Toshiba Value added Package from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Remove the VAP, restart the computer and install the new VAP software.

  In addition, check the BIOS. I don't know if there is an option for Mr. lighting if so, enable it and that s.

• Qosmio X 70-A - keyboard does not work properly

  I have a Qosmio X 70-A-12N, newly purchased last September, 8.1 Windows 64-bit.

  After working properly (and lots!) for half a year, the keyboard started to stutter.

  If you type a paragraph or two, with say 250 words, each time and now, to say that every 10th or 20th Word (undpredictable), a key shot does not work. I tried another keyboard via USB: no problems, so it has to do with the built-in keyboard of Qosmio.

  It is not specific keys, and it is not the pressure with which you press the key.
  Any key can be be ignored from time to time.

  All drivers have been updated to the latest questions, the BIOS is 1.50.

  It seems that the problem is more important when working on the battery (not sure).

  Is it a software or a hardware problem? Should the keyboard be exchanged?

  My first thought was last updated from the BIOS, but according to the Toshiba download page you have latest version of the BIOS.
  You know that's not easy to say what the problem is here. I can't say with certainty if there is a problem with the keyboard, but maybe you should contact the nearest Toshiba service provider, explain the situation and ask for help.

  They know what needs to be done. at least, they have very good diagnostic tools and it is possible to detect the problem.

• Qosmio X 300 - 11W - TouchPad does not work in mode 'sleep'

  TouchPad does not work in mode 'sleep'. I can't wake up my computer using a touchpad. I downloaded and installed a driver for Windows 7 32 bit from a page of the Synaptics driver, but it did not help.

  Can you wake up your Qosmio using the power button / stop?
  You close the lid when the laptop enters the sliding mode?
  After you open the laptop lid should wake up. It work correctly?

• Qosmio G50 - Fingerprint log - it does not work

  I had to reinstall the software (like new) on my Qosmio G50 due to problems. (vista 32) Reinstall the fingerprint logo does not work and he keeps asking mr to register my fingerprints, when I try to do, he says can't open database specified. No idea how to get back on that.

  I tried to remove and don't reinstall, no luck
  I tried the fingerprints of delete on the settings in the event of corruption, it will not.
  Any help would be greatly appreciated.

  See you soon

  Here's a very interesting FAQ from Toshiba on how can you remove the fingerprints fingerprint reader?

  http://www.MyToshiba.com.au/support/items/FAQ/386

  Please post comments if you can remove fingerprints already recorded using this documentation

• Qosmio F60 - 11F - FN key does not work

  Hello

  the FN key in my laptop suddenly does not work and so I can't use with combination keys to control my laptop. I tried to make it work with the HWsetup, but there is nothing special for her in the keyboard tab

  I went to the download page for the driver to try reinstalling the driver, but I could not understand what driver should I download

  How can I make the FN key still works?

  My laptop is Qosmio F60 - 11F

  Please check if you can find the option restart Flash Cards in the start menu > all programs > Toshiba > utilities. If you have please use it to restart. If this will not help, try to reinstall Toshiba Value added Package. This package contains the utility of Flash Cards.

  Post comments.

• Qosmio F50 - bright/Fucntion keys do not work after update BIOS buttons

  OK... I read a similar post and has FACT EXACTLY what IT SAID TO DO... He solved half of the problem or less... after the update to the new bios that I'd like speed or make my Qosmio energy gave me problem from the first day I installed it...

  The reason why I upgraded to was I thought he could solve my problem of flash memory card. They NEVER APPEAR AFTER REBOOTT... I ALWAYS HAVE RESTART THEM IN THE WINDOWS MENU... I thought that if I do a scheduled task. This would solve the problem. Guess what... It SCREWED my windows calendar place... a mistake self-protection
  This brings me to install the new bios... After you install... He has created ONE MORE PROBLEM, INTOTAL - TWO
  (1) KEYS INFORMED DON'T WORK
  (2) FLASH CARDS DO NOT WORK
  After following the instructions of a thread posted here... He told me to remove the VAP and reinstall... Guess what... it solve the key problem... but MY KEYYYYYY FUNCTION... I restored my pc... He said if your function key is disabled... GUESS WHAAT AGAIN... THE FIRST PROBLEM TO... ILLUMINATED KEYS DO NOT WORK... I later discovered that I can't have both things at the same time according to the instructions... Oh Yes... I forgot to mention;... CARD FLASH showing... shut up has never shown... restoration takes me to the original problem...

  I think down my BIOS version that might solve the problem but can't find it... I don t want to restore because I might install additional software like the game... Assassin s creed... BTW... It works AMAAAZZZINNNN... but the multimedia and function keys keep on bugging me
  I have a Qosmio F50-126 with Vista 32 bit...

  Try:

  Reset the BIOS to its default settings.
  VAP to uninstall and install the latest version from the Toshiba site.

  PS I think you can change the lighting in the BIOS, have you checked this setting?

• Qosmio X 870-button 3D does not work after reinstalling

  Hi all

  I like a nice clean install I always install windows me, that's what I did with my new Toshiba Qosmio X 870.

  I got everything to work. There are unknown devices not on the left, but the 3d laptop computer button does not switch to 3D. Instead, I have to rightclick the desktop > Setup NVidia > check / uncheck the box 3D.

  Being the lazy person I am I want to reduce the number of shares I must perform to toggle the 3D, so I want to restore the function of the 3D button.

  I found on the forums that I need to install the "TOSHIBA Remote Control Manager", here...

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=270410#270410

  but I can not find this piece of software anywhere.

  Am that I on the right track here? Or should I do something else entirely to restore the button?

  Hello

  > but I can not find this piece of software anywhere.

  You can find this software on the Toshiba UE driver page in the section of the Qosmio X 870 driver:
  [Remote Control Manager v 3.0.1010.1 for Win 7 64 bit | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 381 & selSeries = 231 & selProduct = 7506 salt ShortMod = 3728 & language = 13 & selOS = 30 & selType = all & rupload = Yes & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 2 & ID = 82405 & O SID = 30 & driverLanguage = 42]

  You must also install all the other stuff to Win the Toshiba especially page 7 the VAP.

• Qosmio X 875-Regza-link does not work

  REGZA-link does not work. When I connect to laptop to Toshiba TV HDMI cable, there is no icon regza-link on TV and I can't control the media player to the TV remote.

  At your Qosmio laptop factory settings?
  With other words do you use with preinstalled OS that you got with it?

• Qosmio G30: Cam Sony MV does not work with port IEEE 1394

  Qosmio G30-117 does not support my Sony DCR-IP5E (a micro video camera) port ieee 1394. I tried to use pinnaccle studio 9 and video ulead studio 10, but I could not see my cam because of these programs.

  There is no problem if I install a new win xp media center edition (retail pack) and CDTOOLS drivers. But I want to use my setup of the Qosmio factory, I don't want to buy a new win xp media center edition.

  How can I solve this problem?

  Thank you all.

  Hello Amon

  I tested it with Qosmio G20 and my Sony camcorder using the same port.
  I tested it with Windows movie maker, WinDVD Creator, Adobe Premiere and Ulead Media studio Pro 8.

  You may believe, but each application was able to see my cam and I copied movies on the HARD drive, edited and created DVDs. I don't really know what is happening in your case, but when you connect your switch cam on game mode, and the cam must be recognized as new hardware and listed in Device Manager.

  When it works well to start the applications and check again.

• Qosmio X 875 - ECO mode does not work immediately after Win 8 upgrade

  I used the upgrade Toshiba Upgrade Wizard to Win 8. He succeeded well uninstall the incompatible software before the upgrade and install the new Toshiba and driver versions after the upgrade.

  I activated the ECO mode, and to my surprise, it does not work as before (in Windows 7):

  * Now, it works with the brightness to level 1 *... very dark. Before, ECO mode allowed me to go up to level 4 and was always considered in Eco mode...

  If I increase the brightness, the 'eco mode is disabled' message opens immediately.

  How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?

  BTW, I am owner of a Qosmio X 875

  Post edited by: qosmitto

  > How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?
  Contact your Toshiba authorized service provider in your country.

  Read this:
  + What is the TOSHIBA eco Utility? +
  http://APS2.toshiba-tro.de/KB0/FAQ2503AT0000R01.htm

  > It changes the brightness of the display of level 4, changes the brightness of the grey screen of level 1 (* 4),.
  _The * 4 means only on models with Windows7 installed _

  I guess that the previous configuration was only Win 7.

  8 win was made for mobile (use of the Tablet), the energy consumption of battery is also very important plant help to win 8. The consumption of the battery must be taken at the lowest level possible.
  So I guess that now help win 8 ECO medium mode and save the power max and long battery life time working at a max level.

• Qosmio G10: The operating system does not work corectly

  Hello. My problem is that my windows xp does not work corectly, mousecursor, sounds, videos, games, programs, everything turns into a ' stop and go '. as the cpu slows all the 1-2 seconds. I reinstalled windows now 4 times and any document in the format hd´s.

  Don t know what to do...

  and a second question... maybe this could be the answer for the first ;-)

  in my hardware-registration of my system windows are two elements, for I can't find a driver.

  -PCI-Device
  -videocontroller fuer multimedia (German ;-))
  in English systems, maybe it's the multimedia "media control device" or "videocontroller" or something...

  does anyone know if I can get the drivers, because they´re not listed on the toshiba site. and my backup-disk system was stolen. (sounds strange... I know :-))

  OK, please give me some advice, if you have any ideas!

  THX a lot, patrick

  Hello Patrick

  First of all, it will be interesting to know if the unit is pre-installed by recovery media. The installation of Qosmio is quite complicated, and I recommend you use the restore CD.

  In this way it is not possible to give a precise answer because I don't know what kind of things is installed on your device. I guess in your case, some application (such as the virus scan) runs in the background and your HARD drive can be pointed out.

  If your recovery DVDs is stolen, you can order a partner of service authorized in your country.

  Good bye

• Qosmio F750-03W - face recognition does not start and the video freezes

  I apologize for my English.

  NVIDIA 3D test shots of program wheel. Face recognition does not start.
  If the activator of the image that 3D is disturbed and I do not see the image in 3D.

  If I try the Games 3D compatible (Left4Dead) active 3D 1080 p, but the game is choppy as the test 3D image not turn on face recognition.
  3D game is to see the 2D to 3D pictures, but how do I vadere photos in 3D?

  If the Activator active 3D image quality is mediocre.
  I have defined normal and advanced, but videos have gost especially on side effects.

  Hello

  It looks like your Qosmio F750-03W PQF75C 03W001 is a Canadian model of Toshiba that I found it here:
  http://support.Toshiba.ca/support/ISG/Center/en/index.asp?S1=notebook&S2=Qosmio&S3=F750&S4=PQF75C-03W001

  First you need to update the BIOS with the latest version (at this time, it seems that BIOS 2.0 is the most recent).
  Also update the
  nVidia Display Driver version 8.17.12.9039
  Super-D IC Driver version 1.0.1613.809
  Toshiba Blu - ray Disc Player version 1.0.1.299
  as mentioned here http://support.toshiba.ca/support/isg/tsb/en/view.asp?docid=TSB001633

  If stereo 3D effects are not well use X-tune to calibrate it.
  It is recommended to use this utility to optimize the 3D stereo effects when you use the 3D without glasses for the first time or to be dissatisfied by the 3D effects.

  To use the X-Tune utility, follow the steps below:
  1. Select the language mode and optimization, and then click OK. There are three optimization modes: primary, advanced and professional. You can choose according to your own experience.
  2 sitting about 60 cm from your computer, click Start to continue.
  3. follow the onscreen instructions on each step.
  4. use the left or right side of the keyboard arrow key to adjust the effect. When you are satisfied with the effect, click on enter and then an information window appears on the screen. Press the keyboard ESC key to cancel the optimization procedure.
  5. click on Finish to close the X-Tune utility.

  You said that your face recognition does not work correctly so uninstall this software. This also with the software/driver for webcam. Once these two tools has been uninstalled, clean the registry with CCleaner and install these two tools using the most recent version.
  Restart and start X-Tune to calibrate the 3D effects.

  In the doc of Toshiba (link above), you can find this notice:

  1. the value [screen resolution] 1920 x 1080. Glasses free 3D mode is not activated except in mode 1920 x 1080.

  2. depending on the game, it does not work with glasses free 3D mode and with the 2D mode.

  3. depending on the game, it display correctly with stereoscopic 3D mode

  4. the game does not appear with glasses free 3D mode when you run drive Blu - ray TOSHIBA with glasses free 3D mode
  or run TOSHIBA Web Camera application.

  5. the performance of the game will be reduced when the game with glasses free 3D mode. If the game performance is considerably diminished, please reduce the quality of the image of the game by using parameters
  of the game. If the performance of the game are still not sufficient, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  6. small fonts in games can be difficult to read with the glasses free 3D mode. At this time, please press the PC 3D and temporarily disable glasses free 3D mode. Glasses free 3D mode is enabled if you again press the 3D button

  7. the response of the game may delay with glasses free 3D mode. If you feel it and can not enjoy the game, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  8 glasses free 3D mode can be disabled temporarily by pressing the PC 3D button, but it can be activated by playing game. At this time, please press the 3D button and turn it off again.

  9. when [enable stereoscopic 3D] in NVIDIA Control Panel is not checked, the game will start with 2D mode. At that time, glasses free 3D mode is not enabled even if you press the button during the game PC 3D.

  10 glasses free 3D mode may be turned on except TOSHIBA Blu - ray player and games. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  11. the color of the video may be different from the original during video playback with full screen on RGB and not 3D TV if [enable stereoscopic 3D] is checked. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  I hope this helps.