Re: Satellite L10 dosen't start

Similar Questions

• Satellite L10 - standby does not, the computer will automatically start

  Hello!
  I have a problem. My satellite L10, two months, began to behave strangely. When I put it in 'stand by' mode then after awhile it starts automatically. I do not have anything but the computer just affect position 'on '. It takes sometimes an hour, sometimes for several hours.
  I sometimes use 'stand by' because it can be over long periods of time during the days where I have the computer.
  There is a problem with my computer or - is this normal? If there is something wrong, what to do?

  Novis

  Hello

  I use the stand by mode if I don't need a laptop for several hours not days.
  If you do not need the device for a period of several days, I recommend to turn it off.
  Well, I put have a precise answer to this question.
  It's maybe something s wrong with the electronic power?
  I suggest to contact the ASP for more detailed information.

  Best regards

• 'Bad Machine' error when I start the recovery on Satellite L10 media

  Hello...

  I have a Toshiba Satellite L10-103 and I want to make the recovery, since I have constant errors and my wireless does not work.

  When I put on CD, everything is ok, I press F12 and get the choice when I want to access computer. I select the CD/DVD drive. That produces the recovery starts and I get this error message:

  "Wrong Machine! This software is designed for personal computers TOSHIBA '

  What's wrong with it?

  Hello

  Are you sure that the recovery CD you are using is designed for Satellite L10 - 103 to 110%?
  Please check this!

  But if you use the same recovery CD that came with the laptop, and you still get the same error message, then the false DMI information that is stored on the motherboard might be responsible for this error message and might prevent to recover.

  This can occur if the motherboard has been replaced and that the technician has not updated the DMI string.

• Re: Satellite L10-90 - time settings are wrong if I start the next computer

  Hi, I have Satellite L10-90 with XP Home. The time setting is always bad for about a month. I synced the time and it seems to be fixed. But if I start the computer the next day, the time is wrong again. I found some information in Google. Some people say that the battery on board already is discharged and must be re-read by a new one.

  I don't know what could be the reason. If I need a new battery, where it is on this computer, and how to change?

  Help will be appreciated.

  Hello

  Normally if you leave the AC adapter plugged the CMOS battery will be charged. If the AC/DC adapter is connected during the night?

  If you have enabled the internet time synchronization time must always bet right.
  Check it!

  As Akuma said if the laptop is connected to a server, it is possible that the time on the server will not

• Start of satellite L10 fan speed and noise

  My L10 cooling fan start always maximum speed, when it turns on it always burst at maximum speed (and noise) and then slow down to a speed (and slient relative). This fan start noise is very annoying (as fan departure every half hour in office work and every 15 minutes in some simple games).
  I try muffler or bios settings performance they do not fix the noise and the starting speed.
  Maybe Toshiba could release some bios update or patch or something to fix this? (my bios version 2.0)
  Maybe this problem has the solution software thrid party?
  Or the fan speed max is just a hardware problem?

  Thank you.

  Hello Albert

  The same thing my Qosmio F20 and in my opinion, it is not any kind of technical problem. At the moment I'm typing this text and hear Internet radio at the same time. The cooling fan works regularly.

  In my opinion, when the operating system runs several different processes running in the background and they need the CPU activity that needs to be cooled correctly. In my opinion, you should check the power settings management settings and change the performance of the processor to lower the level.

  If the cooling fan runs every 15 minutes, in my opinion, it is not too often.

  Good bye

• Satellite L10-102 RAM upgrade does not

  Hello

  I bought 512 MB PC3200 RAM for my L10. After installing the module the computer failed to initialize. I tried all possible combinations (like changing slots, only install new modules), but the computer only starts with the original module. I would appreciate any help on the issue.

  Concerning

  Hello

  Satellite L10 needs this memory:
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)

  Good bye

• Satellite L10 - Hotkey.exe error after booting Windows 2000

  I've installed Windows 2000 on my Satellite L10 rather
  XP. After installing the utility Hotkey-I get an Error Message at every boot:

  Hotkey.exe - Entry Point not found
  The procedure entry point WTSUnRegisterSessionNotification could not be loaded into the WTSAPI32.dll dynamic link library.

  Same error Message When you try to manually start the Hotkey.exe.

  How can I solve this problem? The system works, but the
  Keys not.
  Thank you in advance for help!

  P.S.: As I read on the web, this error has nothing to do with the missing operating system XP - maybe the HotKey software does not work with Windows 2000. Where can I get a Hotkey software work for Windows 2000 for Satellite L10?
  I try to find it on the download from Toshiba site, but there is that some drivers for the L10 on Toshiba.com and the European server are only readers for XP :(

  Hi turmeric

  All the drivers, tools, and utilities are designed separately for each operating system. This means that you can not use tools designed for Windows XP Home edition with other operating system. You don't find utilities and tools because your device is not supported for the Windows 2000 operating system.
  I'm sorry.

• Satellite L10-119 freezes after RAM upgrade

  My Satellite L10 is 4 years old. I wanted to update this change of RAM and HARD disk.
  I installed in RAM DDR1 SoDimm 1 GB PC-3200 (a unit) and used my computer for a few hours.

  But next time, he started to make mistakes and freeze or stop going to the blue screen.
  When I use DDR1 SoDimm 512 MB PC-2700 as a single unit, everything is OK.

  Will not track with * 1 Gb PC - 3200 * to use?

  Hello

  Case is clear!
  > When I use DDR1 SoDimm 512 MB PC-2700 as a single unit, everything is OK
  You used the not entirely compatible RAM modules!
  This is the reason why your laptop freezes!

  The fact is that your L10 can be upgraded to 1 GB RAM max, this means you need to use max 512 MB RAM module in a slot

  In addition, you can use the PC2700 200 pins (333 Mhz) DDR SODIMM modules and not of PC3200

• Satellite L10-194 cannot run after recovery

  Hello! I used my Satellite L10-194 for a few years, and he started to be really slow, I decided to reinstall the system (recover) to make it cleaner and faster.
  I found my recovery of product L10 DVD - ROM, but when I finished the system restore would not start. I tried the recovery for some time, and it does not help. Whenever I try to start the computer, when it goes to load the system it just turns off (I think that it is something like the blue screen flashes for a second).

  I checked the disk file image in advanced mode and HARD, and that's OK. But when I do HDD-> image in advance mode, after it is sometimes a moment when I have access to the command line. After getting "dir C:" I don't see a Windows directory (?), when restarting the computer does not work as usual. I'm doing something wrong?

  I tried another CD of product recovery of the second Toshiba laptop that I have, and it works, it installs Windows but without pilots and things (it's a completely different model from Toshiba). What should I do? I'm not sure if the use of system preinstalled for model is the right idea (and legal)?

  I had some problems with my front L10, and I had to change the motherboard. In service, what they said that they can't find a motherboard identical like that in my L10, so they used some different model. It's maybe the problem of recovery does not work why?

  PS.
  Sorry for my English, please correct me in my errors, to help me improve the language :)

  > I had a few problems with my front L10, and I had to change the motherboard. In service, what they said that they can't find a motherboard identical like that in my L10, so they used some different model. It's maybe the problem of recovery does not work why?

  I think that this is the reason why your laptop does not start after the recovery procedure.
  Seems that the drivers that are part of the image are not compatible with the new motherboard.
  Maybe the driver chipset or make sure you graphics card drivers some worries and windows crashes before starting the system
  Maybe you could star the windows in safe mode. Press F8 just after pressing the power button / stop. Then choose Safe mode.
  In safe mode, uninstall the chipset driver and the graphics driver and then try to start it again.

  If that does not help, then install windows using a clean Microsoft CD.
  Pilots should be placed on the page of European driver of Toshiba.

  welcome them

• Satellite L10 DVD Super Multi Drive - E/s of entry Error Message

  Does anyone know why, when I try to play a CD or CD-ROM, I get a box saying i/o error of entry?
  I have a Satellite L10 with a DVD super multi drive. It can read DVDs and DVD ROM

  I thought maybe it was a cable connected the drive itself, but if it's that I need how out of the car and how to support.

  I tried updating the driver and uninstall it then reinstall the drive, but I still have the same problem.
  Cannot use the accompanying software as is all the cd.

  Please can someone help me.
  Thank you

  Hello

  In most cases the entrance of e/s, error message is related to a hardware malfunction (CD/DVD drive).
  The readers of the lens laser can not calibrate properly and therefore it can not read the CD inserted.
  These errors are not uncommon and occur mostly after a long period of use due to a material stressed.

  But let's check the last possibility of solution;
  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then, restart the computer and check if it of possible to read CDs.

• Satellite L10 - no DVD/MPEG/DivX playback

  I can't play a DVD or file MPEG/DivX on the Satellite L10 of my aunt. Further when you start some games, I get error messages like that Direct3D has failed. When you try to playback MPEG/DivX with WinAmp only sound can be heard but not video.

  Trying to read DVD with for example PowerDVD I got an error message (something like "mode not supported to display, please change the resolution, depth of color or frequency).
  Strangely playing DVD worked perfectly because I configured the L10 before shipping to my aunt. She has very bad computer knowledge and therefore no new drivers or anything else have been installed.

  I checked the resolution and try other resolutions and color depths, but it did not help. There must be a problem with Direct3D but I have not found where check/change the Direct3D settings. I would setup unintentionally new graphics drivers, because I know that the 'old' has worked well and the L10 is about 1500 km and I do everything with the remote control software - if something happens, we have a great difficulty.

  Someone know this problem or has any advice?
  Thanks in advance for any answer!

  Hello

  Well, Microsoft DirectX is a set of technologies designed to make computers based on Windows a perfect platform for running and displaying applications rich in multimedia elements, such as color graphics, video, 3D animation and sound surround.

  You can try to check which version of DirectX is installed on your device and check if the latest version is available. I think the latest version is 9.0 c

  To start the program, please type in the dxdiag command window
  Hope this helps.

  Good bye

• Satellite L10-333 PSL10E - USB dongle problem

  HI members, I have a Toshiba satellite L10-333 MODEL No. PSL 10F now I bought a 02 usb wireless dongle.
  now my problem is that whenever I have start my laptop and connect to 02 to get online, the dongle starts to make a loud noise, which is constant and pushes me insane.and it breaks to the top of the internet connection.

  now, I was on the 02 forum, told me it might be the usb port is bad, or maybe I should try re - install the usb drivers, I can not find on the web site of Toshiba, seem to be an error with the results.

  I don't want to spend any more money for this laptop, as it s old for a few years and I have already replaced the screen
  at a cost of £150. can someone help me please.

  I don't have any other Internet, only the dongle... Thank you Paul.

  Jin

  > maybe I should try re - install the usb drivers, I can't find it on the web site of Toshiba, seem to be an error with the results.

  Download chipset utility of [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] and install it

• Equium L10 300 Wont start white screen

  Hi I wonder if anyone can help or advise me with a problem starting

  It's a portable satellite L10 300 XP homedition, after running PC doctor to remove Popups and adware my laptop stopped commissioning.

  Initially started after the system check it kept returning a blue warning screen that flashed off very quickly before close and try to restart this making it very difficult to read, but I managed to do something about a problem of physical memory and the dumpster, I managed access the options of safe mode and tried each of the options including the last good configuration known, but all failed to start the machine and I'll be back the same error message. Then at some point with all of my violin that it now wont even run the system check before crashing it's now only the initial startup which allows me to access the system BIOS F2 and F12 and nothing more.

  I have the product recovery disc and tried briefly before interupting it is when I realized the instructions say it will reformat the hard drive and I'll lose all my data that I do not wish to.

  Is there a way for me to fix it or copy extracts my data before using the product recovery disc.

  Thank you very much in anticipation.

  First of all, you should check the memory, it may be altering the data. Have you recently installed spare memory? Go to www.memtest.org and memtest from a floppy disk or a bootable CD.

  To recover your data, you can remove the HARD drive and connect it to another PC using a 2.5 "USB adapter. Then put the HARD return drive recovery to and execution.

  PS. You can view the blue BSOD code by pressing F8 at startup of Windows start and select 'Disable automatic restart in the event of system failure' in the Menu.

• Sun Virtual Box & Toshiba Satellite L10 - recovery settings problem

  Hi-

  I had a problem with my Satellite L10 and earlier could not get full recovery settings after installing Virtual Box from Sun and ignore warnings from Microsoft.

  I suspect that this has now cloned my drive. Something is very very wrong. I use Win 7 beta in the meantime but want my XP back.

  Here are my notes at Sun Microsystems:

  [http://forums.virtualbox.org/viewtopic.php?f=6&t=15106]

  If anyone has had the same experience or that Toshiba recommends?

  Thank you

  Tim

  Hello

  Virtual Box from Sun is not known to me and I don t know what happened with your installed Win XP on the HARD disk (if you have the OS installed)
  Usually, you should be able to boot the system by using safe mode, restart your computer and start pressing F8 on your keyboard. Select an option (last good configuration, etc.) when the Windows Advanced Options menu appears, and press ENTER.
  Check it!

  If you are able to start in Win XP then you can use the System Restore tool and will mark the BONE to this early time until Sun virtual machine has been installed

• Satellite L10 - 205 - product recovery CD does not work

  I buy a Toshiba Satellite L10 - 205 laptop from Dubai and since it was working fine.
  But now it became slow and I thought that to format using the original product recovery CD.

  When I format, it gives an error about 25% of the formatting.
  I tried to do it again and again, but the same problem persists.

  Which, in my opinion, I had the wrong product recover CD when it starts formatting he says loading Windows 98, but I have windows xp on my computer.

  Could you please give me the soultion or is it possible to get the right porduct recovery CD

  > Which, according to me, I had the wrong product recover CD when it starts formatting he says loading Windows 98, but I have windows xp on my computer.
  This is not a defect, Toshiba image that sits on the recovery disc for an old series laptop is based on Win 98 again Win XP is on the disc! So don t worry it s Win XP!

  I m not very well why you can not recover the laptop, but there are two options; HARD drive failure is so the laptop has been slower or the recovery disk is faulty (maybe a few scratches, etc.)

  In case you, it would be desirable to test the laptop with other bootable disks (MS Win XP or Linux) to check if the HARD drive is ok