Re: TouchPad on Satellite L30 no longer works

Similar Questions

• DVD - rom on Satellite L30 does not work

  My dvd rom is not working, when I insert a cd or nothings DVDs arrive. I have a satellite L30. I have the latest version of the driver (I think).

  Hello

  Your driver is listed correctly in the Device Manager and Windows Explorer?

  The description of your problem is quite short and I can just recommend that you test the drive using movies DVD and music CD.

  If you have time please post a little more on this problem. all info you can offer can be useful.

• Satellite L30-149, only works with external monitor and VGA mode

  Satellite L30-149, Windows XP Home Edition

  Yesterday I did face the following problem:

  I swithched on my laptop but I have nothing on the screen. I tried to reboot several times, but it did not help. If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  I plugged on the external monitor. With that he gives a little more. The Intel logo with the instruction how to reach configuration etc. Then Windows logo but when it should ask the user, the external monitor going to sleep mode and nothing happens after that.

  And an external monitor, I managed to connect to Windows in safe mode and also in VGA mode. In VGA mode, I tried to change the resolution, after that I got black screen again and I had to start.

  Now I wonder if I could do something (update of drivers, etc.) or should I go to the store where I bought the laptop and ask them to fix it. This look like a problem covered by the warranty?

  --
  Upgrade to this message (what happened after that I wrote the above text).

  I turned on the laptop again. I thing the lightning from the room is now better because I noticed that the laptop seems to work (almost) correctly. Windows starts normally, I can faintly see the desktop. This seems to be a problem in the background ligthning. FnF7 does not change the situation.

  Post edited by: mpetas

  > If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  This sentence is very interesting.
  Sounds like a question of FL-ups!

  It is a small part behind the screen and control the backlight of the screens.
  Usually, this part is not very expensive and the replacement is not complicated to a technician for laptop.

  If your warranty is valid, then everything should be done for free.
  Try to contact the ASP in your country and ask for later handling.

  Greetings and good luck

• my station touchpad toshiba satellite L355D-S7901 of work

  My touchpad has become slow and unreponsive

  completely uninstall and reinstalled toshiba satellite L355D-S7901

  Vista 32 bit

  Hello

  Toshiba has also map of keys which allow easy adjustment of the TouchPad. See support for Toshiba
  and Forums. The key shortcut for the TouchPad, if they are responsible in the Fn + F9 or see the key card
  So usually loaded at the top of the screen.

  There is also usually a TouchPad control utility that loads in the Notification area next to the clock
  at the bottom right.

  Toshiba support - click Communcate for links to the Forums and Contact Toshiba.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Toshiba downloads - access your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba forums - good source of info from others who have the same system or similar
  http://laptopforums.Toshiba.com/

  Check with the manufacturer of system support, documentation in line, or forums as there probably
  are shortcut keys that enable and disable the touchpad functions.

  Also check the control - Mouse - touchpad settings panel.

  You can also try this:

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touch pad-
  The driver tab - click on Update Driver (which is may not make anything like MS is far behind certifying)
  (drivers), now right CLICK on the touchpad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in).
  RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad
  of work.

  Here is the similar procedure in XP, Vista is the same, except that we need to clear the specific
  device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the website of the manufacturer of system (Toshiba downloads - access your model - listed above)
  and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

• My Satellite M70 no longer works, and caps button flashes

  My problem was explained in the title. I just want to know if there is a problem or not. I work on Linux and windows XP, but the problem can happen in the BIOS.
  Thank you, Vivien.
  If you need more information, please ask me :)
  PS: it's the Satellite M70, and I changed the RAM

  Hello

  I'm afraid that you have to be a little more specific than one that's a little wave... but now that you mention that you have changed the RAM maybe this is related to the question of Mr. is your RAM speed appropriate for your laptop? (Example to 400 or 533 MHz, regardless of the speed is indicated for your product). Because if your RAM is at the wrong speed, or at a higher speed (for example, 667 MHz, which happened with me) the computer can crash/blue screen/go crazy.

  In fact, now I remember that my flash CAPS LOCK button too, because of the bad RAM or Aries do not correctly inserted. I recommend to check the speed of your RAM and make sure that you have inserted the right type, RAM speed and you have inserted it correctly

  I hope this helps.

• Touchpad on Satellite A200 does not work properly

  Hello!

  At the beginning my touchpad worked well. I turned off and used a mouse instead... now I can't turn the touchpad!
  I tried it in the system controls and also with fn + f9... I installed the latest driver, but it does not work.
  Can someone help me?

  I have the same problem with my A200 - 19L. Before I started using the mouse A4tech MOP - 60 d my touchpad worked very well in Vista, Windows 2008 Server, Fodora 7, Ubuntu. Now it doesn't work at all.

• Pavilion dv6 synaptic touchpad disable the shortcut no longer works

  Hello

  I had a few problems with this computer, tried everything finally uninstalled and reinstalled windows (7).

  I used to use the shortcut fuction - double click on the upper left corner of the synaptics touchpad to turn it on and the.

  Because windows was re-installed the shortcut works more I can't turn it off! typing is horrible cause I keep hitting the button accidentally and my mouse goes everywhere, but I need to turn it on as well for when I do stuff on the show without the mouse.

  I think the guy who re-installed windows for me disabled an option because I cannot get the biometric finger-key thing to work now.

  Please someone tell me how to activate the shortcut touchpad option on! I looked under "mouse" in the control panel and tried to search for "touchpad", etc. "synaptic" in the start menu;. but no dice.

  Please, this is driving me nuts (taken as 20 minutes to write this)

  Hello

  First, download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55107.exe

  Then, open windows control panel, open programs and features, If you see an entry for "Synaptics Pointing Device Driver", right click and select uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Now, you need to configure the touchpad as described in the HP document on the following link.

  Configure the ClickPad.

  Kind regards

  DP - K

• Satellite A100 no longer works

  Hello
  I bought a broken laptop and when I start it, I get very little:
  all I get is 2 blue lights and a couple of those red above the keyboars for approximately 1 tenth of a second.
  I reset the bios.
  I disassembled it and don't feel no heat goes to the processor, but the Board must work as switch wireless card lights with the touch of startup, but no fans or anything else.

  Help, please

  First of all, I wonder why you bought a machine breakdown when you´re not able to fix it.
  If you´re not a technician then sell the machine and buy a working one because no one here could not exactly tell you what to do or how to fix it.
  The only positions would be like: 'send the machine to a service partner' or 'change the motherboard' or 'sell the machine', 'throwing out the machine in the trash.

  I assumed that the motherboard is defective and must be replaced. I've already replaced some mothers on toshibas and it s not as easy as some think. You need some experience and often it s not only the motherboard that is faulty, sometimes there are more as you assume.

  I hope that you will set. Good luck.

  Welcome them

  P.s.: If you need a site that is useful for something you want to do then check out the following link: http://www.irisvista.com/tech/

• Satellite C55 - Touchpad no longer works

  Hello

  The touchpad on my C55 no longer works.

  After you restart the touchpad works until I signon to Windows. After this, all functions will stop.

  A few days ago, I think that some Windows updates have been launched.

  Is that what someone else has had this problem and can you give me a solution please?

  In addition, immediately after the entrance to Windows, it works always, but after a while, he stops. This rings a Bell?

  The driver for the touchpad seems to be ok.

• Satellite C850-1GL win 8 - pad touch, speakers, WiFi no longer works

  Hi all

  My Toshiba suffered a number of problems.
  My touchpad and wifi, speakers no longer work.

  Im running windows 8.
  Tried a restore of the entire system to the factory settings but in blocked to do this.

  Any advice would be much appreciated.

  > Tried a restore of the complete system to the factory settings but in blocked to do this.

  In order to reset the laptop (make recovery) you have two:
  -Recovery disk (or flash memory)
  -HDD recovery

  What have you tried and how?

• Satellite L30 - 10Y - upgrade successful but CPU fan is running

  Hi ppl,
  This post is more than a FYI post.

  I gave myself a defective Aspire 5610 and decided to whip the CPU out of it and put it in my Toshiba Satellite L30 and it works! CPU of the Satellite is a series of Intel Celeron M @ 1.87 Ghz, while the Acer processor is an Intel T2300 Centrino Duo 1.66 GHz. So my Satellite is now slightly faster, but added to it's 2 GB of RAM and a hard drive upgraded to 320 GB under Windows 7 Ultimate. While its still not a game machine, it creaks all the numbers that I throw at it!
  Hope this helps someone.

  I noticed that the fan runs almost constantly, suggestions?

  Concerning
  Markkyboy

  Hey,.

  Thanks for this very interesting article! It of Nice to hear this new CPU works fine, but I have to say there is no guarantee for this, but you have chance ;)
  Update CPU's official not taken in charge, but in some cases, it may work, depending on the motherboard, BIOS and CPU.

  In any case, I think the fan runs almost constantly because the newer and more powerful CPU producing much more heat and it must be cooled cooling system that is designed for your older CPU.
  All you can do is to clean the cooling system, but I think you have already done this during the exchange of CPU and use of grease thermal correct amount.

• Satellite P20 doesn't work anymore - clear CMOS?

  Hi all

  My laptop Satellite P20 no longer works, the system switches, but nothing happens, nothing on the screen, just the fans blowing air.

  I would like to clear CMOS, but I don't know which bridge to shorten on the motherboard.

  I also saw this: [http://support.toshiba-tro.de/kb0/TSB4B009N0006R01.htm | http://support.toshiba-tro.de/kb0/TSB4B009N0006R01.htm]
  I'm afraid that my son has tried to add a password for me not to start the laptop and maybe he aded "©" letter which is especially common in french. He said that he did not do anything... but I don't really trust him when he says that hahahah...

  Thank you for your help

  The document above describes the problem with Equium A60, Satellite A60 and Tecra S1 units and not the Satellite P20.
  So I think we can exclude your laptop BIOS password problem.

  According to your message, the problem looks like a malfunction of the motherboard
  > I would like to clear CMOS
  I put t knows anything about your experience of mobile but it seems you would mix technology PC desk with mobile technology. The layout of the motherboard for the laptop is just different and to be honest I don't think that if a clearing CMOS sensor would solve this problem

  In my opinion you have only one option; the authorized service provider should be contacted to clarify what s bad! If the motherboard is dead then you can solve this problem with the replacement of the Board of Directors and this could be a costly affair

• Satellite C70 - A - 15 d - Touchpad no longer works

  My touchpad no longer works. Windows 8.1.

  New drivers can not be installed. MOMENTUM: error message bad touchpad. Synaptics: obviously empty zip file after downloading.

  Any idea where I can get the zip file of work?

  Are there function keys that enables / disables the touchpad?

  Thanks for the tips!

  + The message was edited: model number added to the object.

  many answers but we cannot reply if we do not know what model of laptop you have, so please the exact post model name of your laptop by Satellite.

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Satellite A350-212 - touchpad no longer works

  Hi all, I have some problems with my FN keys, my touchpad no longer works, in addition to this, when I press the FN key, I don't see any icon on the top of the screen... Two days ago, all this did not work properly... An error is given by the program called Tossiba assist, its written exactly this way: this system cannot use accessibility... Could you please help on this issue?
  My operating system is Windows vista 32-bit (service pack 1)

  Finally, sorry for my English if I make mistakes, it is not my mother tongue...

  Thanks in advance

  Try to restart flash cards.
  Start > all programs > Toshiba > utilities > restart Flash Cards

  After doing this press FN button several times to see if Flash Cards are still on the top of the screen.
  If you see Flash cards again use the FN + F9 key combination to activate the touch pad again.