Reading disc Verbatim

Similar Questions

• Qosmio DX1210 - ODD does not read discs

  Hello, I was asked to help fix a friends computer its an
  Toshiba DX1210 all-in-one desktop.

  its about 1 years with no problems until today the hard drive has suddenly stopped reading discs completely it custom similarly recognize that there is a disc inside.

  I know there is a possibility that the laser is broken, but I want to eliminate everything before I propose to replace the ODD.

  ODD:
  HL-DT-ST BD - RE BT11F

  I have looked everywhere for an answer and did everything I learned to do in the past, but nothing has worked.

  I used restore points.
  Uninstalled the driver then rebooted to reinstall it (installation is a breeze and everything works).
  Reformatted your entire computer (created a backup and restored everything after that she did not).

  I'm stuck on this 100% and really want anyone who might have the answer for me or even to suggest something that would be a great help.

  With regards to your friendly IT Junkie

  MSG to the moderators if this is the wrong thread for this, please direct me to the right pair

  Hello

  Have you tried to clean the laser lens?
  Do this by using a fluid tip and alcohol of wadding.
  Be very careful and don't use force

  I had problems reading some discs and cleaning the laser lens has solved most of my problems with CD/DVD player.

• Satellite A30: Canoe start Recovery CD - cannot read disc information

  My a30 is about six years old.
  About two years ago, I used the recovery disks to format and reinstall windows xp
  I'm trying to do the same thing again now, but a window appears saying "can't read disc information.
  What could have happened to cause the a30 not to recnognise the disc? (he continues to recognize other discs)
  hope someone can help me
  Carl

  Wait. window saying "can't read disc information! ???
  How have you tried to use the recovery CD? Have you tried to start the recovery of the Windows operating system?

  Sorry, but something like this is not possible! You have to BOOT UP from the recovery CD to install the new OS!
  But beware, the recovery will format and remove the data from the HARD disk.

• Satellite Pro A10 - CD/DVD drive has stopped reading discs

  Hello

  I have an old A10 Pro Satellite which has a DVD rom stopped reading discs.
  He goes through the motions but does not display anything.
  I am attaching a new external DVD RW via USB, and it has the same problem.

  Anyone have any ideas?

  Concerning
  The

  Hello

  you mean that the external hard drive does not work too? Some software blocking your disks?

  I think that the best way to check if your internal drive still works would try to start with a bootable CD (perhaps with a live linux distribution on it) and to try this with the external hard drive also.

  If you're really a software that prevents the drive work properly, then you should recover your machine with the recovery media to make the drive work again properly.

  See you soon

• Satellite Pro A10: DVD rom sd c2612 stopped reading discs completely

  OK, I have a Satellite Pro A10, recently it is just stopped reading discs completely! Ive got no idea what wrong with and do not know if you need to replace? I prefer not too.

  If anyone has any advice on repairing it I would appreciate it. If not if anyone knows if there any compatible DVD readers writing? also the best place to buy?

  Help, please!

  Hello

  This does not sound well :( I think it could be a hardware problem maybe something wrong with the lens of the drive
  Anyway, usually it of not possible to fix these issues or it s not worth repairing, because the costs are too high
  Thus, it seems that you need to replace. But be careful. Not all readers are compatible because different master/slave/c-salt settings.
  I would recommend so contact the ASP in your country to get a compatible drive.

  But please try this proposal;
  Sometimes, the Player cannot read the Middle due to the incorrect registry key.
  Remove the upper and lower filter filter in this key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  and restart the laptop. Maybe it helps

  Good luck

• ONE OF THE OPTICAL READERS READING DISCS 2

  I am running Microsoft Windows 7 Home Premium 64-Bit. I'm having a problem getting one of my optical drives recently added to read discs. The engraver of CD - RW LG GCE - 8525-B, (set as slave), will read audio discs but nothing else. The master disc will load and play discs very well. Do not forget that the problematic drive worked in another system, a few days ago, and so I do believe that it is a mechanical problem.  Windows 7 has found and installed the drivers, and the name of the device appears in Device Manager. I also do a Windows repair install, that does not resolve the issue. Here are some features that can help:

  • The two drives are connected with a 40 wires IDE Ribbon.
  • Work drive is set to master. DMA2.
  • Problem LG GCE - 8525-B is set to slave. UDMA 2.
  • The reader will turn very quickly and is still on for a long time before giving up.
  • My motherboard is an Asus P5LD2.

  I decided to replace the drive with a DVD - RW drive, which solved the problem. The previous reader works fine in another computer now. Thanks for all your help!

• ATA device tsst corp dvd player not reading discs

  My dvd drivers do not read any type of dvd VIRGINS, but it plays DVDs that are written

  I have some writing his and my computer reads those them, but no vacuum

  I have a tsstcorp H493B AND I HAVE WINDOWS 7 driver
  He said of his job very well, but it is still no bed

  I have tried these things

  -uninstall the drive and install it back
  -tried the thing "fix it" and says "the disk drive is not supported.
  -also tried this

  1. Click Start
     Collapse this includes this image

     

     type regedit in the Search box, and then click regedit in the programs list.

     Collapse this includes this image

     

     If you are prompted for an administrator password or a confirmation, type your password, or click continue.

  2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

     Warning There may be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.

  3. In the pane, click UpperFilters, and then click Remove.
  4. Click Yes to confirm the deletion of the UpperFilters registry entry.
  5. In the pane, click LowerFilters, and then click Remove.
  6. Click Yes to confirm the deletion of the LowerFilters registry entry.
  7. Exit the registry editor and restart the computer.

  STILL DOES NOT WORK

  Hello

  If you have tried all of these methods, it sounds like the drive has a problem
  may be due to wear or age, they go wrong.

  "BTW, by"reading"discs, I hope you meant"burn"as a blank disc.
  cannot be read because it does nothing about it. If the unit of optical burning failed
  a black disc is not recognized or burned.

  Try the drive in another computer and try another drive in your computer.

  I hope this helps.

• new computer windows 8 won't read disc

  I have an ASUS brand new with windows 8. The computer will not read disc when placed? and it will not burn?

  Are there settings I have set for my computer to perform these tasks?

  On the right side of the screen, you should see a bunch of Red icons 'AB '...

  Some have then the text filters upper or lower filters...

  "What kind of DATA" ' is rated on the far right.

  In addition, when you click on the arrow to the left of the button, you should see a dropdown menu with some records.

  What are folder names?

• Error "Cannot read disc" after nc4200 replacement hard drive

  Hi all

  I read through the postings but did not see an exact match for the issue I'm having.

  My 5 year old needed nc4200 finally a replacement hard drive.  I bought a new 120 GB ATA-6 WD Scorpio Blue 40 GB ATA-7 Toshiba plant.  I was able to clean up a few errors on the old disk and the Partition Magic 8.0 successfully used to copy all the data in a single primary partition on the new 120 GB drive using all available space.

  I started with success the drive on the Windows desktop using a separate post of full PC.  When I inserted the new, WD drive in my nc4200 however I got an error "cannot read disc" immediately after the MESSAGE.  The BIOS is a short wee on tests of diagnostic and other information on the hard drive, but I ran with success a test drive in the menu of the BIOS with the net results.

  I have advanced and updated the BIOS to version F.0F thinking there may be some 1024 cylinders deliver or other incompatibility big disk, but this new version also shows the error of reading.  At this point, I'm stumped.  Why this new boot in my desktop PC drive but fail in my nc4200?  What do I have to use some tools HP blessed to make this readable disk?

  Thanks in advance!

  Well, I guess you can call this one resolved.  I sent the WD Scorpio Blue 120 GB drive (model WD1200BEVE) and ordered a WD Scorpio Blue 80 GB (model WD800BEVE) instead.  I cloned my old Toshiba 50 GB 5400 RPM (model MK6026GAX) with Acronis True Image WD Edition.  I installed the new drive in my nc4200 and pulled upward on the first try!

  I'm still not sure why the 120 GB didn't work.  The only thing I noticed is that the done 120 GB one noise rattling and the 80 GB is not then maybe the drive was defective.  I'll never know however, if it was the drive or the size of the drive, that was the question, but I hope that this info will be useful to someone else looking to exchange a HD of aging in a nc4200.

• Hello.  I need help.  I use Photoshop Elements 10 on my MAC, but is no longer reads discs.  Can I download it from internet with my serial number original package?

  Hello.  I need help.  I use Photoshop Elements 10 on my MAC, but is no longer reads discs.  Can I download it from internet with my serial number original package?  Thank you

  Yes, from here:

  Download Photoshop Elements products | 10, 11, 12, 13

• Qosmio G50 - CD / DVD player will not read disc

  I've seen similar posts on this problem but I have not solved my problem. Sorry if it's repetitive for some.

  My * DVD drive is visible * on my computer, but when I put one * disk in it does not display / run * (it cannot be read).

  I tried to use the automatic thing to delete the files in the upper and lower register. And I tried to reinstall the driver.

  PC diagnostics said the DVD player has failed the test, but is not a solution. Nor can help Microsoft fixit.

  Please can someone help. Thank you

  You can use optical disc as boot device?
  ODD readable disks bootable?

• Re: Satellite A210-12U: Mat * a DVD - RAM UJ-8505 will not read discs - error Code 39

  Hello.

  I've had my A210-12U for about five months now, and recently for the past few months I had some problems with the dvd player.

  The thing is that the player will not play all discs, the drive will detect that a disc has been inserted, but it will not read. It happened for about a month but its only recently I really know whats been wrong with it.

  The drive I currently use is a CARPET * A DVD - RAM UJ-8505 ATA

  I scanned the disk for problems with the support toshiba but utility that came with something so I decided to check the drivers.

  Windows Vista gave this Message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I uninstalled the drivers and drivers on there and installed new ones that I downloaded here on the toshiba site.

  What I really want to know is: is this a problem with the drivers? is it a case that the operating system does not detect the hardware? or is this a situation where I should have the disk fixed on its guarantee?

  was soon Dan

  Hello

  Don t worry buddy I put t think that it s a hardware problem. It looks like a corrupted registry entry and it should be solved easily

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  and restart the laptop

  See also this article from the Toshiba FAQ:
  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  and the Microsoft Knowledge base
  http://support.Microsoft.com/kb/314060/en-us

  Good bye

• Satellite 1900-102: drive will not read discs of backup data after formatting C:

  Help needed desperately, please.
  Formatted my hard drive yesterday as too much evil and adware on computer, it slows down.
  Spending the day together download all udpdates Windows etc.
  CD drive reads audio discs, dvd, program the files on backup disks, utility records...
  ... BUT the habit of reading the data backup discs before formatting, for example, I did. Word documents, power point documents, photos. I get an error message saying: D:\ is not accessible

  any ideas?

  Kevin

  Hello

  I put t know why only this drive doesn t work on you laptop, but if the drive works on another computer then try to create a new backup of data CD and then try to copy the files from the new CD to your Satellite 1900

• Satellite L300 - error reading disc so I can't start Vista

  Please can you help me?

  Have a Toshiba Satellite L300. All I get is disc read error has occurred, please press Ctrl Alt + Delete.
  How can I get to start again. I have no idea what it takes then just keep pressing Ctrl Alt + Delete and it says a disk read error has occurred.

  I'm going along in circles in. Running Windows Vista Premium.

  Hello!

  You can access the advanced boot menu if you press F8 after starting the laptop? Then you can start to the recovery Toshiba HDD option (select Repair my computer).

  If you can access the advanced boot menu, you must reinstall Windows Vista from the t. Therefore, you can use the Toshiba Recovery disk if you start from it.

  Good bye

• Satellite L500-1DT - unable to read discs

  During these last days, I was unable to play all disks on my laptop but I am able to view the files on the disk. Usually they would be auto-play, but it just doesn't happen.
  Money is a little tight right now so I'm hoping there is a simple solution then send in repairs as it is still reading the files on the disks.

  Any suggestions?

  Hey Buddy,

  I put t know what the problem is exactly, but have you tried different media? Maybe some discs are scratched and t can be read correctly.

  And that you use the version preinstalled Windows or your own installation of Windows?

  It's really hard to say something but maybe to delete upper and lower filters help