ATA device tsst corp dvd player not reading discs

Similar Questions

• DVD player not reading disc or disc.

  Hello

  I bought a 4545 s of HP ProBook Windows 7 64 bit pro service pack 1 last year and never try to use the cd-rom drive. I wanted the cd/dvd drive, think someday I might want to burn a cd or dvd.

  When I tried to burn a cd/dvd, I realized that the system is not identifying or disc. When I try to launch disk troubleshooting thanks to HP support assistant, it prompted: an accur error while troubleshooting. An unexpected error has occurred. The Troubleshooting Wizard can not continue. ». Given error code was 0 x 80070057.

  I opened the Device Manager and go back to hp UJ8D1 DVD-RAM SATA device. CdRom installed. When I click the icon it prompt "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  Does it means that I have to uninstall and reinstall?

  All the system and software has been updated.

  The software/driver came with it when I bought it and I never change anything whatsoever and never tested until now and when I went to HP it said that my warranty has expired. So unfair.

  Hello

  I finally solved this problem with the link below using the #2 solution

  http://support.Microsoft.com/kb/314060/en-us

  Good luck to you guys

• TSST corp DVD won't read or write

  I have a desktop Dell VISTA computer.  He's got a TSST corp DVD +-RW ts-H653B ATA Device.   When I got the computer from Dell (April 2008), the DVD worked fine.   Now it is not recognized by Device Manager - it is for me a "Code 10" - that it does not start.   I tried everything.  My machine is a Dell VISTA home Premeium

  Any ideas? send me an email to * address email is removed from the privacy *

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Please make all below even if you have done some before as it is often the set of operations which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite P200 - 1FC - CD/DVD does not read discs

  I have a Satellite P200 - 1FC ' CD/DVGW TSSTcorp TS-L632D ATA Device will not read CDs or DVDs and do not respond. Device Manager shows that this device does not work correctly.

  Can you please help?

  Hello!

  Try to remove the drive from Device Manager CD/DVD, and then restart the laptop. It work?

  If this isn't the case, you should try to remove the upper and lower filters:
  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Good bye

• Windows 8 DVD ROM not reading discs

  Yesterday I installed a few games on Steam, I was playing Saints Row the third while he was busy installing and bit after that I had to restart my PC because it was originally the trolling game. At the next startup, my laptop then got stuck on the login screen, where I put in my password/PIN and it would just sit there and do nothing. This kept going until that of course I had to go in safe mode and use that 'Everything clear, but keep your files' option windows 8 a, and am now able to log in and access my files.

  Nut, now I am faced with a new problem, my DVD ROM will not read and disk I insert in there. It was working fine until I deleted everything, and now I can't use it.

  I tried to use the tool of diagnosis provided by Microsoft for this problem, but it does not work. I should also mention the possibility of editing the registry does not work either.

  My laptop is reasonably elderly, ten months or so, but I doubt that it is only a hardware problem because the DVD ROM shows on my computer and device manager says it works very well.

  Are there other solutions for this or should I just take it back to the shop?

  Hi Taonga,

  Thanks for posting the query on Microsoft Community.

  I'm sorry to know that the DVD ROM is not working now. I appreciate your efforts toward this problem. It could be a software or a hardware problem.

  1. What is the brand and model of your computer?
  2. What diagnostic tool do you run?
  3. Did you try it with any other DVD?

  You can try all the steps in the below link, it may be helpful when fixing the issue.

  Run this fixit: http://support2.microsoft.com/mats/cd_dvd_drive_problems/en-us

  If the problem is not resolved, then follow the link below.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs:

  http://support.Microsoft.com/kb/314060/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756

  I hope this helps to solve the issue. If the problem persists, contact us. We will be happy to help you.

• CD Rom and DVD Rom not reading discs

  Hello

  My CD/DVD-rom is not reading any music cd or a DVD movie that I insert in the drive. I looked in the currency manager and the samsung cdrw/dvdsm-352F material displays a yellow exclamation point. It gives me a code 41. He says that the hardware is installed, but cannot read the device.  Can you please let me know how I can fix this.  Thank you!

  
  

• CD/DVD does not read discs on Pavilion G6 2293SA laptop computer running Windows 8 :(

  Hey there

  I would be very grateful if someone could help me with this.

  I bought the G6 Pavilion in November last year. When I got home I went to a recognize (as recommended) recovery disks but the laptop there is a blank disc in the drive. I tried a couple of different brands, but nothing worked and I got to the PC world. They couldn't work out what the problem was if gave me a replacement, and exactly the same thing happened. They claimed that it was probably one of the "many problems with window 8'. Finally, I tried some Sony DVD - R discs and it worked (hooray!).

  However, since that time the player rarely works properly. It seems to work ok program disks, but don't like them burn all discs. It has never worked through iTunes, for a few days, it let me burn some discs of music with Cyberlink Power2Go but it no longer works.

  Sometimes when I go hard disk it will say there is no disk in it (when it exists) or is it in use? We'll see what he does today... OK, Virgin (Sony CD - RW) drive... the hard disk is whirring... but nothing happens on the screen. OK, navigate to my computer... Double-click the icon and it says: "How do you use this disk" and gives me two options: "as a USB' or 'player with a CD/DVD '. However, it only allows me to choose the first option (which I don't) and even if I click ok on the flash drive option, it says that the drive must be formatted, mess around trying to do for about 10 minutes and then says format failed.

  Can anyone suggest anything? PC World that it is a software problem and my problem (thank you guys). Really grateful for any help.

  See you soon

  Paul

  I suggest using the corresponding update firmware in the driver download section.  Who looks more like a problem of hardware/firmware for me. Use Device Manager to select the firmware update software good optical disc. If the firmware update does not resolve the problem, thencontact HPfor warranty repair.

  Best regards
  ERICO

• Windows 7 - DVD does not read the disk on the computer.

  My DVD does not read discs, when I click ion DVD player on my desktop shows insert a disk me error help

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My dvd player will read disk now but my cd player won't can anyone help

  Hi, my dvd player will read disc now, but my cd player can not help everyone, also the copy of microsoft sent with the computor is not the same as that installed Wndows xp media center edition 2002 that they sent is as it says on the windows disk mredia Center version 2005 with update

  Update Rollup 2, can anyone advise me what to do?

  Hi Albert,

  Thanks for posting your question in the Microsoft community.

  I understand that you have 2 questions:

  1. The DVD works fine while the CD player does not work.
  2. You have Windows Media center 2002 edition installed on the computer, however received the disc with Windows Media center edition 2005.

  I would like to know if the understanding is incorrect.

  To solve the first problem, I suggest you visit the link and try the methods in the knowledge base article.

  How to troubleshoot common problems that occur when a Windows XP-based computer

  Cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  For the Windows Media center disc sent bad, you will need to contact the Microsoft customer service. Check the link for more information.

  http://support.Microsoft.com/kb/302822

  Let us know if you have any further questions. We will work together and solve problems.

• Pavilion dv6-6c53cl: dvd player not working not not after restoring - all missing drivers, does not appear in Device Manager

  Recently, I have restored my computer dvd6-6c63cl of flag State 'out of the box.  The dvd drive no longer works.  When you put a CD, you can hear him swirling but the screen does not open.  In addition, in the Device Manager section, dvd is not listed.  I think that I need the drivers, but I did have luck to find them on hp.com (just a recovery disc, you can order).

  I tried some of the solutions on this forum for other computers, but is it didn't work (FixIt) or things in the registry (filters) were not there and one was something that was 32-bit and since it's 64-bit, I was afraid to try it.  Clearly, I don't know enough about computers.

  In which case it is important, I recently had my fan replaced and do not know if the dvd player worked after that.  Obviously not used often.

  You can provide any help would be greatly appreciated.  The computer is 3 years old so I don't want to add 'guaranteed' type plans, but at the same time, I don't want to replace the computer for something so little.  The restoration of fixed the problems I had (internets public wouldn't connect and updates did not exist).  Thank you!

  You may consider replacing the internal DVD player or using an external DVD burner.

• After the BIOS update DVD driver not reading not DVD - Sat A80

  Hello

  I have a Satellite A80-131 and after bios update (latest version 2.5) by windows update procedure, my DVD do not read DVD media more. It is possible to play CD but not a DVD media.

  Can I reinstall the old bios? Can I reinstall the firmware?

  Thank you
  Ronai Lisboa

  Hello

  Strange!
  On the Toshiba driver page, you will find also 2 Firmware updates.
  Check which drive you unit and try to update the firmware.
  Also try installing the DVD ram driver.

  PS: It is not possible to roll back the BIOS or install the first version of the BIOS on the device. Only the Toshiba service partner may DOWNGRADE the BIOS

• DVD drive not read/write

  my dvd drive not reading/writing.its a matshita dvd ram uj - 850 s .windows vista sp2.sony vaio vgn ar 550u.its showing the CD/DVD I insert as empty. someone help?

  Hi dt6789,

  Please see the post below with a similar problem and fix possible:

  http://social.technet.Microsoft.com/forums/en/itprovistahardware/thread/57d84d2b-5dd5-4f37-BADC-9e784a24211c

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• code error 19 for TSST corp DVD + _RWSN-208BB on a Dell computer

  I get an error code of 19 for TSST corp DVD + _RWSN-208BB, it's a Dell computer that was a floor model

  What should I do to play my DVD?

  Hi Bruce,.

  Try to remove the GEARAspiWDM entry.

  To remove the GEARAspiWDM entry double-click UpperFilters and, under value data, delete GEARAspiWDM > OK

  Create a system restore point beforehand and restart the computer after.

  However, if you have an application that uses the GEARAspiWDM, like iTunes, just install the latest version of hardware drivers (4.021.1) and that no changes to the registry:

  http://www.GearSoftware.com/support/drivers.php

  Updated speed drivers should also correct the mistake.

• Qosmio G50 - CD / DVD player will not read disc

  I've seen similar posts on this problem but I have not solved my problem. Sorry if it's repetitive for some.

  My * DVD drive is visible * on my computer, but when I put one * disk in it does not display / run * (it cannot be read).

  I tried to use the automatic thing to delete the files in the upper and lower register. And I tried to reinstall the driver.

  PC diagnostics said the DVD player has failed the test, but is not a solution. Nor can help Microsoft fixit.

  Please can someone help. Thank you

  You can use optical disc as boot device?
  ODD readable disks bootable?

• CD DVD WILL NOT READ OR WRITE. D: IS NOT ACCESSIBLE DUE TO THE I/O DEVICE ERROR

  Toshiba Satellite A - 105 Windows XP media center management with a MashitaDVD/RAM UJ - 841S drive will not read or write CDs D States is not accessible. Cannot be performed because of an i/o device error. However, I can play movie CD via the media center.

  Does anyone have a solution? Thank you!

  Hello

  ·        Was there no hardware or software changes the system just before this problem?

  Please try to follow link below to solve the problem with the DVD player:

  http://support.Microsoft.com/kb/891894

   

  Note: After a repair in method 2 in the link above, make sure you put the computer to start as usual as shown in method 2 in the above article.

  Hope this information helps you solve the problem. Let us know if it helps.

  Thank you and best regards,

  Ramata Thakur

  Microsoft technical support engineer.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.