reading/wrtie disc error

Similar Questions

• The error that says it cannot read the disc.

  I installed a CD using Windows Media Player AutoPlay as my default for audio CD the 1st song plays, but when I select the next song, I get a red X icon and an error saying the disc cannot be read and it climbs to the 3rd song. So, if I select another song, I get several red X icons on several songs. It happens with all prerecorded CDs that I install. The disks are clean and new and everything worked fine before, but I had my Windows Vista Home Premium reloaded recently. I don't remember if the player has worked properly for reloading. Why can it read well enough to still play some songs if it cannot read the disc. I'm getting confused. Can someone help me sort through this and help me make it work? I'm not too computer, so be gentle. Thank you... Dave

  I installed a CD using Windows Media Player AutoPlay as my default for audio CD the 1st song plays, but when I select the next song, I get a red X icon and an error saying the disc cannot be read and it climbs to the 3rd song. So, if I select another song, I get several red X icons on several songs. It happens with all prerecorded CDs that I install. The disks are clean and new and everything worked fine before, but I had my Windows Vista Home Premium reloaded recently. I don't remember if the player has worked properly for reloading. Why can it read well enough to still play some songs if it cannot read the disc. I'm getting confused. Can someone help me sort through this and help me make it work? I'm not too computer, so be gentle. Thank you... Dave

  =====================================
  Intermittent problems can be complicated to solve but it
  seems that you have a hardware problem with the
  optical drive. The player may require, cleaning service
  or replacement.

• Re: DVD of the (optical) drive cannot read a disc when inserted.

  Hello everyone.

  MY DVD drive can not read a disc when inserted.

  When I check the Device Manager, it has the following against the optical drive error message:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  How can I solve this problem and fix it for free if possible? Download a patch from the website of toshiba?

  Your help is greatly appreciated.

  Mark

  See also http://support.microsoft.com/kb/314060/en-us and post comments.

• Sony Handycam DCR-DVD305 Disc Error C:13:02

  I get disc error C:13:02 when you try to get the video on the disc. I can't get the drive to read in the computer, either. How can I see if there's some videos about it. It is a double-sided disc, one side work and not the other. It's very frustrating. Any suggestions?

  Hello
  Welcome to the Forums of Discussion of the user.

  Please refer to page 127 of the user manual and codes error of research by clicking on the following link:

  http://www.docs.Sony.com/release/DCRDVD105-205-305.PDF

  Try saving another disc using the camcorder and check if the camcorder works well. If you believe that there is a problem then contact the Sony Support by clicking here:

  http://eSupport.Sony.com/us/p/support-c... D305 & LOC = 3

• My hard drive is not even read the disc (Dragon Age: Origins)

  Today I bought a new video game for PC (Dragon Age: Origins).
  After inserting the disc, I thought I could hear the drive reading the disc, but it kept stopping.

  This ended up in my computer not give me an error message saying that there is problem... it's almost as if he thinks that I have never inserted the disc.

  So I tried to run another game disc, and he managed to read the disc.

  Please help :(

  the required for the game is the following:

  OS: Windows XP (SP3) or Windows nice (SP1) or Windows 7
  Processor: Processor Intel Core 2 SINGLE 1.6 GHz or equivalent AMD Athlon 64 2/0 GHz processor or equivalent
  RAM: 1 GB (1.5 GB Vista and Windows 7)
  Disc drive: DVD ROM required
  Hard drive: 20 GB of disk space

  and I guess that video and sound are not the problem here.

  I'm not a 'computer' wiz or anything either, but after reading the label of my system, it seems that the requirements very well.
  they are here:

  OS: Windows Vista 64 - bit family Premium SP1
  Processor: Intel Core 2 Q6600 Quad-Core
  RAM: 4 GB DDR2
  Disk drive: Super multiformat DVD + RW DL with Labelflash
  HDD: 750 GB

  ... As you can see, taking me the time to post all this place really shows how frustrated I am... so please Helo me ASAP :(

  It is possible that you have a bad DVD drive.  Try it in another computer (a friend or relative) and if it didn't work for them either, you may have to contact the company for a replacement drive.  If it works on their computer and not yours, you may need an update of the firmware of your DVD player to make it compatible with the disc.  It is a rare event, but can happen.  You will need to go to the website where you made your computer and download the update of the firmware if available.

• CD drive not reading some discs

  I had this problem of market for some time.  Sometimes my CD player can not read some discs.  For example, I have a set of six discs of music, and it will not read discs of second and sixth in the game.  I put them in the drive, and nothing happens.  Not even an error message.  These are new records.

  Any suggestions?  It is a Matshita UJDA755yDVD/CDRW in my IBM Thinkpad.

  Thank you

  Katherine

  Hi Katherine,

  ·         The question is limited to the CDs you mentioned?

  Follow this link and see if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• My CD Rom won't read all disc types

  My CD Rom won't read all disc types.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Targeted Read Test failed [error code: WHD16-CSB]

  I use a DELL Inspiron N530 desktop computer. Is my hard drive model: WDC WD2500AAJS-75VWA0 device. When I run a test of hardware of Dell Support Center. It showed the following error:targeted read Test failed (error code: WHD16-CSB)

  The unit has reported the following State: the previous self-test completed having the read element of the test failed.  The first default LBA value is 20750407 and the failure occurred after that the device was working since 23398 hours under tension. Failed (error code: WHD16-CSB)

  Please help me find a solution.

  The reader is 23398 market h years.  Thats 974 days or years 2.67.   If the drive is probably dying if not dead.

  Western Digital WD2500AAJS Caviar Blue drive is very common and inexpensive.

  The standard OEM warranty on these discs is 1 year and the retail warranty is 3 years from the date of manufacture if
  you do not have a retail receipt.

• 303 disc error

  My Pavilion G6 threw a 303 disc error.  HP sent me a new HARD drive and a recovery kit, but I can recover?

  I have backup via Virgin Media must therefore be able to get videos of music/etc, but which, on all downloaded programs.

  for example. WinZip, Norton 360, Spotify (I use a lot) and many others.

  The programs that I found on IE really solve 303 errors, I have my doubts?

  Details of the PC: -.

  Model: G6-1371ea Pavilion

  Product no.: A9J83EA #ABU

  Drive: HTS54757A9E384

  Purchased: April 4, 2012

  Hello

  An error 303 is a disk failure short self-test and shows generally a physical problem with the drive - IE areas that no longer can be written or read.  There are certainly autour software that can mark these 'bad' sectors should not be used and the reader can well then make a diagnosis, but it's really just hide the problem.

  About your software, supplied with your new HARD drive recovery disks will reinstall nearly all of the original software comes with your laptop, but you will need to re - download and install third-party applications such as Spotify again.

  Kind regards

  DP - K

• Solutions to the problem of CD/DVD drive cannot read DVD discs

  This article will tell you 3 ways to solve the problem of the CD/DVD drive do not read the DVD disc. Please the process step by step.

  Solution1. Clean the DVD disc

  If your Player cannot detect the DVD disc, the first thing you need to do is to clean the DVD disc. Use a soft and dry cloth (not painted) to wipe the disc from the center of the disc to the edge. Please take care to not to use a paper to clean the disc with a circular motion, it will scratch the disc.

  After cleaning, inert the DVD on the drive to see if it works, if the reader can't read the disc, use a cloth of cotton wet with water or alcohol to clean the disc. After the disc dry, inert re the disc on the drive. If the reader can read, the operation is complete. If this isn't the case, please turn to the option2.

  Option2. Check the disc to see if it has been damaged

  Draw the DVD from the drive and check if there are some scratches or small cracks on the disc. If the disc is damaged, please try another DVD disc to see if the drive can read. If the drive cannot recognize the new disk, there could be a problem with the CD/DVD drive. Please turn to solution 3.

  Solution3. Clean or repair the CD/DVD drive

  When a CD/DVD drive has been used for a long time, its ability to play disc will only get worse. Then, the reader can not read some discs, or blocking your computer in the middle of the reading disc. This is usually due to the aging of certain parts of the disc, CD/DVD player dirty.

  Open the drive to check if the DVD reader accumulates dust and dirt, if so, the cold air from the hair dryer allows you to clean the inside of the DVD drive. Be sure to not blow on the optical sensor orally, or clean it with a cloth of cotton with water or alcohol. After cleaning, insert a DVD disc on the drive to see if it works. If still no, you need to call the s command customer service or take the reader to a computer repair shop.

  Post edited by: Newhampshireguy

  Thanks for sharing your experience with us!
  I think your assignment might be useful to others here in the community.

• 'No disc' error on the Toshiba BDX1200KY blu - ray player

  (Sorry, there seems to be no jury of blu ray player)

  I bought this drive blu - ray 3 months ago and a week ago I had a 'No Disc' error when I tried to play a DVD. The machine plays all my DVDs without problems before if is not a concern for the region. Now, he will not play one of my DVDs and they are all clean and intact. However, she still plays my blu ray discs without any problem. I bought a blu ray disc lenses cleaning hoping that would solve the problem, but it didn't. So, I bought a DVD lens cleaning disc but being a DVD itself, she also returned an error of 'no disc '.

  The problem is that this is my second machine in about 6 months. Exactly the same thing happened with my previous Toshiba BDX1200KY and the electronic shop guys couldn't get out and gave me a replacement so it is very likely that the fault is mine.

  These machines have distinct popsicles for Blu Ray and DVD? Can someone suggest a solution. I smoke and I often stop the machine. It is pointles continuing until I have it worked.

  Unfortunately, it's a computer / laptop Forum options so I m afraid there is not a lot of people who can provide you with solutions

  However, I put t think that this player is equipped with different laser lens it s a goal that must manage all disks

  My player couldn't handle all the disks because the goal was dirty. I unmount the drive to access the lens and managed to clean it with a cotton tip and a little alcohol.
  So it helped in my case

• Satellite P200 - 1 d 0 (PSPB6E) - CD/DVD drive will not read a disc

  Hi all

  Given that I have uninstall powerDVD on my laptop and alcohol 52% of my laptop, I'm unable to read any disc DVD or HD-DVD

  When I insert a disc, the departure by car to analyze and scan again and a new analysis... some applications like IE are frozen during this scan, then after a few minutes it stops just analyzes the disk and adds nothing. Impossible to explore the disc, Device Manager indicates everhing is correct and up-to-date.
  I have try to uninstall the drive from Device Manager after the abolition of upper and lower filter keys registry, no effect on my problem.
  I have also try to reinstall "Hardware Configuration" and HD DVD player, but no results

  Someone has an idea or another trick to try?

  THX in advance for your help

  Have you tried different s CD/DVD in the drive?

  Maybe you should clean the registry because there might be hints of powerDVD. For this, you can use CCcleaner:
  http://www.CCleaner.com/

  What operating system do you use? Have you installed it the Microsoft disc or disc Toshiba?
  Make sure you have all the updates of Windows installed.

• Satellite P855: CD/DVD drive does not read 3 "Disc Camcorder

  I have a new Toshiba Satellite P855 model but can not get the CD drive integrated read/recognize 3 "discs of my Sony's Handycam camcorder.

  My previous laptop Aspire straight bed (as did older laptops) and currently have to use the Acer to import video footage on a hard drive.

  If I connect directly the Sony camcorder to laptop Toshiba (via USB) it won't always recognize the drive if I put it back in there.

  The Toshiba uses the W8 while software on Acer and other models previous I was using Windows7, but I do not see how it would make a difference.

  Can someone tell me if it is possible to get my Toshiba to read the discs of my camcorder?

  My apologies if this topic has been previously covered - this is my 1st post on this Forum in question and I did a search on the topic before making this post, but nothing came.

  Concerning
  Terry

  * PS.*, When I put a disc 3 "in the drive, he keeps trying to read (in the sound I hear) but quit eventually.

  * PS2: * can I have solved the problem - sometimes you just can't see the forest for the trees.
  It appears on the Toshiba (under Windows 8), the disc must be finalized before we can read - while on the other laptops (under Windows7), is not.

  > Can I have solved the problem
  > It appears on the Toshiba (under Windows 8), the disc must be finalized before it can be read

  Thanks for the short comments!

• I inserted a DVD into my Dell studioxps and it won't read the disc or allow me to eject. Suggestions?

  I inserted a DVD into my Dell studio xps and it won't read the disc or allow me to eject. Suggestions?

  Check your computer manual or support web site to find the emergency disk eject function and use.  So do not put the drive back.  :-)

• I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base.

  I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base. Have Adobe reader X (10.0.1) who refuses to be carried away. Other than a drive X (10.1.0) has been reinstalled. Also have Acrobat reader 5.0 is installed from a CD of the Canon scanner slide. The error remains. If anyone can help. Leif Stg

  Hi Leif,

  Where do you get this error message?

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall all the instance of Adobe reader and Acrobat reader and install the latest version of one of the drive and check if it helps.

  http://get.Adobe.com/reader/?promoid=DINRS

  Method 2: If the problem persists, perform a system restore and check if that helps.

  How to restore Windows XP to a previous state