ReadyNAS 102 and 5 BT business hub

Similar Questions

• Plex and my readynas 102 and access

  I have installed the plex server in my ready nas, but for some reason when I try to access it from my TV to shield any nvidia tells my that I have to update the software and I have the latest software iny ready nas, k don't know what to do next...

  Now my other question is, yesterday my modem atoped of work and for some strange reason, I couldn't access my nas from my laptop, do I need internet to access my nas? I have hard is a storage unit, I can access my network without needing internet, maybe I'm doing something completely wrong here...

  Thank you all for your visit

  This TV access other devices on your network or on the internet?

  Looks like it could be a network connectivity problem.

• Sonos and ReadyNAS 102 v6.4.1 compatibility

  I use a ReadyNas 102 to serve files from music for a Sonos system.

  Everything worked perfectly under firmware 6.4.0, but after upgrading to Sonos 6.4.1, is no longer able to index or see about two-thirds of the content (files flac and mp3).

  Decommissioning of 6.4.0 snaps back and Sonos works as expected and is able to index my entire collection.

  the upgrade of ReadyNas is the only thing that's changed.

  Any ideas what's happening?

  righteye wrote:

  I use a ReadyNas 102 to serve files from music for a Sonos system.

  Everything worked perfectly under firmware 6.4.0, but after upgrading to Sonos 6.4.1, is no longer able to index or see about two-thirds of the content (files flac and mp3).

  Decommissioning of 6.4.0 snaps back and Sonos works as expected and is able to index my entire collection.

  the upgrade of ReadyNas is the only thing that's changed.

  Any ideas what's happening?

  I use my RN 204 to broadcast my Sonos system files and it still works after that I updated to 6.4.1.

  You have active Antivirus?

• ReadyNAS-102 (6.4.1) disconnects randomly

  Hi all

  Over a year ago I bought a NAS readyNAS-102 as replacement for my old configuration by using a media player with external drives. From the beginning I was very happy with the way everything worked, it was so good!

  I was able to access my files across using FTP, I could listen to my Samsung Smart TV and all devices (laptops, ipads, you call it) could access the database, I created.

  This has stopped recently. For some unknown reason my readyNAS-102 with firmware 6.4.1 randomly disconnects after a while to load. It doesn't matter if it is used TV, laptop or tablet.

  For example, when you watch a movie on the TV, the laptop or Tablet the device disconnects from the SIN after a random delay. This may be 3 or 30 minutes in the film. Strange thing is, it is not peripheral wide, so when the laptop is disconnected (I can't access it storage network or via static ip address) I can still access the NAS with my ipad.

  The same thing happens when you look at photos etc. I already tried several things but can't seem to find the missing piece of the puzzle.

  Perhaps people with more knowledge have a hunch where the problem may be.

  Kind regards

  Tomas

  I am pleased to announce that for the moment, the problem disappeared.

  I updated the firmware to the latest version beta 6.4.2 - T72 and tested by watching a movie.

  For 1 hour and 15 minutes the NAS has run smoothly so I am happy again.

  Thanks for the quick and clear answer y ' All!

• ReadyNAS 102: Problems with 3TO discs?

  Hi all

  I have a ReadyNAS 102 with two WD 1 TB drives, but I'm getting closer to full and upgrade to hard drives of 3 TB. I see a lot of discussions here on the 102 and 2 discs to 3 TB. Is there a problem with discs on the 102 3TO?

  Thank you

  Reference Dell

  3 TB works very well, I had a WD30EFRX in the mine for awhile (2 1/2 years for the first hard disk).

  I recommend readers NAS proposed (in the case of WD, which would be RED or RED Pro).

• Cannot install Firmware on ReadyNAS 102 v6.2.5

  Hello world

  I tried to install the new OS version 6.2.5 on my ReadyNAS 102 but each time it restarts, it always goes back to 6.2.4. I tried to do the manual install, as before, but nothing helped. Does anyone have a solution to this?

  Thank you

  I had been looking for ways to install v6.4 now and earlier I came across this thread: https://community.netgear.com/t5/New-to-ReadyNAS/Unable-to-Uograde-to-NASOS-6-4-0/td-p/993406 which led me to this FAQ about v6.4: http://kb.netgear.com/app/answers/detail/a_id/29961 which then leads to this workaround: http://kb.netgear.com/app/answers/detail/a_id/29961

  The workaround solution "works".

• ReadyNAS 102 no access to the files either

  Hi, I need help!
  Let me try to describe the events that led to this.

  1. I discovered yesterday that the ftp did not work on my readynas 102 suddenly

  2. I went into the admin page and tried to turn off and restart the ftp service. (he has not solved)

  3. I accidentally disabled the http service to uncheck "Admin HTTP"

  4. all access to my nas was suddenly unavailable. ? Shared folders no longer appear in my network. -I got tvmobili installed all this while and strangely tvmobili can still access my files via dlna on my TV.

  5. I tried os reinstall, but in vain.

  6 willing Raidar to a management service is offline error and I am also unable to download all the newspapers. (Failed)

  No browse button, Admin leads to a page that will never load.

  7 diagnosis indicates Disk 1 has 2 timeouts of command

  8. I tried to take the drive out and put it in an external hard drive enclosure. OS x is unable to read the disc. I tried it on debian via parallels and it has a hard drive tb 5 complete with unknown partition (PMBR) and impossible to climb. (How can it be empty if I can still access my files through dlna via tvmobili?) What format is the hard drive in and how can I get on osx or any os?

  9. If I boot the nas as usual, the power button keeps blinking.

  I am currently using Mac in my household. I owe too much in the hard drive just do a factory reset. any ideas anyone? I'd really like to get the files inside!

  Thanks for any help!

  
  

• ReadyNAS 102 - cannot install applications (all)

  The evening

  I bought a ReadyNAS 102 in January, after an initial installation, I installed OwnCloud and decided that I didn't want so I uninstalled. This had the unusual side effect of uninstalling the main web server for the device, after having met the support team, I took the action at the factory reset my device, which has restored the main web server

  Since then I was able to install all the applications. Whenever I try to do, I get the error "unable to install ."

  I've recently updated to 6.2.2-> 6.2.4 firmware and I'm still having the same issues. Although now I also have the message "Apps operation failed: list of applications can be missing or out of date." You want to update the list now? ' - choose 'Yes' to this fact appear a message "update list" box

  I then get a response "list of the application updated successfully. You can now install applications", however, any application I try to install still does not work and the guest above is provided again.

  I would be grateful any advice anyone can offer to fix this issues.

  Thank you

  Chris.

  It turns out that the DNS has been set incorrectly and the NAS could not connect to the internet. Refreshing DNS on the Server NAS has solved the problem.

• ReadyNAS 102

  Hello

  After several years of working perfectly, my ReadyNAS 102 has the following problem:

  • I can't access the Administration Web page, it says only: he is in charge and eventually times out.
    Although it either in this state that RAIDAR said the device starts up - but it never happened that. The power light blinks slowly
  • When I boot it in mode read-only, there is no problem, and both drives are reported in good health.
  • Whe in read-only mode, I can copy data off the coast on a USB drive or eSATA. I can also SSH to the machine
  • I noticed in the newspapers that he has recently upgraded to 6.4.2.
  • I saw a few posts about disabling the add-on - the only one I have is "Supersync" and it is not executed. The instructions in the messages do not seem to apply it is to say

  I initially thought one of the drives died - but it seems that there is a problem with the operating system.

  If anyone can help solve me this I woud be very grateful

  Andrew

  Your data volume becomes quite full and there is a lot of fragmentation.

  We recommend that you keep the volume of use at least 80%. If you want to go a little higher that regular maintenance of regular volume is important.

  The disk with ATA errors looks like it is a failure.

  It would be advisable to back up your data, perform a factory reset, be more selective about which actions to use bit - rot protection and instant and restore your backup data.

• ReadyNAS 102 extremely slow after upgrade to 6.4.1

  I have a Readynas 102 system with 2 drives of 2 TB. There are about 230 GB of data onto the disks. Yesterday, I upgraded 6.4.1, as suggested in the administration page. After that, the system is extremely slow. I use windows 7 pc and modem Asus, all wired. In windows Explorer, it takes minutes to get the folder hierarchy, if it comes with an answer at all. In many cases, that the answer is, disk unreachable.

  Is there anyone who can help me with this

  Thank you

  Joop Baltussen

  What firmware are you running?

  The antivirus service is enabled.

• Server error ReadyNas 104 and plexmedia

  I recently bought this ReadyNas 104 and install the server software Plexmedia. It was working fine.

  Then I got new disks and decided to build a new system.

  When I looked at the app was now lack of Apps, I downloaded plexmediaserver-ros6-binary - annapurna_1.0.3.2461 - 35f0caa_armel.deb

  The following is the error I get when trying to run this application installed. Activation/deactivation of the service then nothing

  very weird but it worked before, any ideas.

  Sven has soon

  The RN104 is not a unit of Annapurna.

  The RN104 uses other armel package. It should have been clear when downloading from plex.tv/downloads

• How to enable curl on readynas 102

  How to activate curl on my readynas 102. I find no answer anywhere.

  I tried to install curl via winscp through the command apt but failed. Please help me with this

  Ah. What of it? :

  # apt - get install php5-curl

  You can try adding

  extension = curl.so

  in your php.ini file.

• Just installed a vigin superhub my portable computer that has a network adapter and connected to the hub, but I get the message cannot connect without certificate

  wireless problem

  just installed a vigin superhub my portable computer that has a network adapter and connected to the hub, but I get the message cannot connect without a certificate, any siggestions would be welcome

  Tom

  Hello, Bill Bates,.

  I would say to contact support with their router blank:
  https://help.virginmedia.com/system/selfservice.controller?configuration=1002&PARTITION_ID=1&TIMEZONE_OFFSET=&usertype=1&VM_CUSTOMER_TYPE=&cmd=ESCALATION_REQUEST

• Cisco TelePresence SX20 + VCS 8.2 Server and Skype for business 2015

  Nice day! My name is Dimitri! Have Cisco TelePresence SX20 + VCS 8.2 Server and Skype for business 2015. Is it possible to set up a conference call SFB and appeal to all subscribers of this conference? At present, we can only call on a single client and SFB. We have the current version of the software TCNC5.1.4.295090 SX20 - is it possible he obnoviti 7, and it will help to improve the situation? Thank you!

  I'm no expert on this technology, but I have some idea and already deployed some projects dealing with the integration of Cisco (CUCM, VCS) video infrastructure to Microsoft video infra like Lync. It would be the same process to make it work in your case.

  How does your deployed SFB? How do you do a conference for audio and video, participants can join the conference by dialing?

  • Mediation server would be required as a front-end server for you to integrate IP/PBXS using SIP trunk to enable voice (audio) Conference with the participants to the PSTN.
  • AVMCU Should be (Audio video Multipoint Conferencing Unit) will host the video conference that will include video endpoints as participants.
  • Video of Interop (SCREW) Server would be required to interface your SFB to third video conference infrastructure such as Cisco UCM or VCS for the endpoints Cisco call client SFB of endpoint of Cisco to participate to the conference organised on SFB by dialing the conference number.

  I'd say contact your AM SFB or Support as well for queries about how to plan your infrastructure SFB and direction.

  Kind regards

  Acevirgil

• I have a subscription to creative cloud but I want only muse and catalyst for business as a minimal or muse, catalyst, indesign and photoshop. Is there a plan, can I change which will integrate any one of these two options and if so how much it cost? and

  I have a subscription to creative cloud but I want only muse and catalyst for business as a minimal or muse, catalyst, indesign and photoshop. Is there a plan, can I change which will integrate any one of these two options and if so how much it cost? and how to convert my membership to which? Thank you, Linda

  You can opt for the one application CC if the product is available. The CC app cannot be designed according to the choice.

  We bundle for Photo Shop bathroom & light only.

  Concerning

  Stéphane