Sonos and ReadyNAS 102 v6.4.1 compatibility

Similar Questions

• ReadyNAS 102 and 5 BT business hub

  Hello world

  I moved to BT Business Monday. I have connected my ReadyNAS 102 and I can access it ok on my mac via the finder and Explorer on my Windows PC 10.

  The problem I have is when I have access to the net via readycloud.neatgear.com. The unit will display offline.

  I have disabled the firewall on the BT Business Hub 5, but he was showing always offline.

  I can log in as admin ok when I connect via IP address directly.

  Can someone tell me what I need to do?

  Thanks in advance.

  He fixed everyone - the readynas has the old IP configured DNS.

• ReadyNAS-102 (6.4.1) disconnects randomly

  Hi all

  Over a year ago I bought a NAS readyNAS-102 as replacement for my old configuration by using a media player with external drives. From the beginning I was very happy with the way everything worked, it was so good!

  I was able to access my files across using FTP, I could listen to my Samsung Smart TV and all devices (laptops, ipads, you call it) could access the database, I created.

  This has stopped recently. For some unknown reason my readyNAS-102 with firmware 6.4.1 randomly disconnects after a while to load. It doesn't matter if it is used TV, laptop or tablet.

  For example, when you watch a movie on the TV, the laptop or Tablet the device disconnects from the SIN after a random delay. This may be 3 or 30 minutes in the film. Strange thing is, it is not peripheral wide, so when the laptop is disconnected (I can't access it storage network or via static ip address) I can still access the NAS with my ipad.

  The same thing happens when you look at photos etc. I already tried several things but can't seem to find the missing piece of the puzzle.

  Perhaps people with more knowledge have a hunch where the problem may be.

  Kind regards

  Tomas

  I am pleased to announce that for the moment, the problem disappeared.

  I updated the firmware to the latest version beta 6.4.2 - T72 and tested by watching a movie.

  For 1 hour and 15 minutes the NAS has run smoothly so I am happy again.

  Thanks for the quick and clear answer y ' All!

• ReadyNAS 102: Problems with 3TO discs?

  Hi all

  I have a ReadyNAS 102 with two WD 1 TB drives, but I'm getting closer to full and upgrade to hard drives of 3 TB. I see a lot of discussions here on the 102 and 2 discs to 3 TB. Is there a problem with discs on the 102 3TO?

  Thank you

  Reference Dell

  3 TB works very well, I had a WD30EFRX in the mine for awhile (2 1/2 years for the first hard disk).

  I recommend readers NAS proposed (in the case of WD, which would be RED or RED Pro).

• Cannot install Firmware on ReadyNAS 102 v6.2.5

  Hello world

  I tried to install the new OS version 6.2.5 on my ReadyNAS 102 but each time it restarts, it always goes back to 6.2.4. I tried to do the manual install, as before, but nothing helped. Does anyone have a solution to this?

  Thank you

  I had been looking for ways to install v6.4 now and earlier I came across this thread: https://community.netgear.com/t5/New-to-ReadyNAS/Unable-to-Uograde-to-NASOS-6-4-0/td-p/993406 which led me to this FAQ about v6.4: http://kb.netgear.com/app/answers/detail/a_id/29961 which then leads to this workaround: http://kb.netgear.com/app/answers/detail/a_id/29961

  The workaround solution "works".

• ReadyNAS 102 no access to the files either

  Hi, I need help!
  Let me try to describe the events that led to this.

  1. I discovered yesterday that the ftp did not work on my readynas 102 suddenly

  2. I went into the admin page and tried to turn off and restart the ftp service. (he has not solved)

  3. I accidentally disabled the http service to uncheck "Admin HTTP"

  4. all access to my nas was suddenly unavailable. ? Shared folders no longer appear in my network. -I got tvmobili installed all this while and strangely tvmobili can still access my files via dlna on my TV.

  5. I tried os reinstall, but in vain.

  6 willing Raidar to a management service is offline error and I am also unable to download all the newspapers. (Failed)

  No browse button, Admin leads to a page that will never load.

  7 diagnosis indicates Disk 1 has 2 timeouts of command

  8. I tried to take the drive out and put it in an external hard drive enclosure. OS x is unable to read the disc. I tried it on debian via parallels and it has a hard drive tb 5 complete with unknown partition (PMBR) and impossible to climb. (How can it be empty if I can still access my files through dlna via tvmobili?) What format is the hard drive in and how can I get on osx or any os?

  9. If I boot the nas as usual, the power button keeps blinking.

  I am currently using Mac in my household. I owe too much in the hard drive just do a factory reset. any ideas anyone? I'd really like to get the files inside!

  Thanks for any help!

  
  

• ReadyNAS 102 - cannot install applications (all)

  The evening

  I bought a ReadyNAS 102 in January, after an initial installation, I installed OwnCloud and decided that I didn't want so I uninstalled. This had the unusual side effect of uninstalling the main web server for the device, after having met the support team, I took the action at the factory reset my device, which has restored the main web server

  Since then I was able to install all the applications. Whenever I try to do, I get the error "unable to install ."

  I've recently updated to 6.2.2-> 6.2.4 firmware and I'm still having the same issues. Although now I also have the message "Apps operation failed: list of applications can be missing or out of date." You want to update the list now? ' - choose 'Yes' to this fact appear a message "update list" box

  I then get a response "list of the application updated successfully. You can now install applications", however, any application I try to install still does not work and the guest above is provided again.

  I would be grateful any advice anyone can offer to fix this issues.

  Thank you

  Chris.

  It turns out that the DNS has been set incorrectly and the NAS could not connect to the internet. Refreshing DNS on the Server NAS has solved the problem.

• ReadyNAS 102

  Hello

  After several years of working perfectly, my ReadyNAS 102 has the following problem:

  • I can't access the Administration Web page, it says only: he is in charge and eventually times out.
    Although it either in this state that RAIDAR said the device starts up - but it never happened that. The power light blinks slowly
  • When I boot it in mode read-only, there is no problem, and both drives are reported in good health.
  • Whe in read-only mode, I can copy data off the coast on a USB drive or eSATA. I can also SSH to the machine
  • I noticed in the newspapers that he has recently upgraded to 6.4.2.
  • I saw a few posts about disabling the add-on - the only one I have is "Supersync" and it is not executed. The instructions in the messages do not seem to apply it is to say

  I initially thought one of the drives died - but it seems that there is a problem with the operating system.

  If anyone can help solve me this I woud be very grateful

  Andrew

  Your data volume becomes quite full and there is a lot of fragmentation.

  We recommend that you keep the volume of use at least 80%. If you want to go a little higher that regular maintenance of regular volume is important.

  The disk with ATA errors looks like it is a failure.

  It would be advisable to back up your data, perform a factory reset, be more selective about which actions to use bit - rot protection and instant and restore your backup data.

• ReadyNAS 102 extremely slow after upgrade to 6.4.1

  I have a Readynas 102 system with 2 drives of 2 TB. There are about 230 GB of data onto the disks. Yesterday, I upgraded 6.4.1, as suggested in the administration page. After that, the system is extremely slow. I use windows 7 pc and modem Asus, all wired. In windows Explorer, it takes minutes to get the folder hierarchy, if it comes with an answer at all. In many cases, that the answer is, disk unreachable.

  Is there anyone who can help me with this

  Thank you

  Joop Baltussen

  What firmware are you running?

  The antivirus service is enabled.

• A few questions about satellite L10-186 and L10-102

  Some stores in my city model offers a L10-186. The technical parameters are described the same L10 - 102 (only the amount of RAM is different).
  I can't find detailed information because the L10-186 model does NOT exist on Toshiba pages (!)

  Nobody knows:
  1. what exactly are the differences between L10-186 and L10 - 102?
  2. If I buy an extra battery - universal battery fits all laptop L10 for example can I use it with L10-101 too?

  Alternatively, if Toshiba has a support email address in order to write and ask? I can't find contact e-mail with Toshiba experts anywhere.

  Thanks for your help in advance,
  Peter Thaler

  Hi Piotr

  I guess satellite L10-186 is your specific country and you can't find it on the site of Toshiba Europe. If you find any information on the Toshiba site please try to find a dealer in your country that sells this laptop. I checked on Google Ant lots from the southeast of Europe.

  The only difference I have found is the RAM. L10 - 102 has only 256 MB of RAM and 512 MB of RAM L10 - 186.
  As far as I know that the battery needs to adapt to the L10 series.

  Good luck!

• How to enable curl on readynas 102

  How to activate curl on my readynas 102. I find no answer anywhere.

  I tried to install curl via winscp through the command apt but failed. Please help me with this

  Ah. What of it? :

  # apt - get install php5-curl

  You can try adding

  extension = curl.so

  in your php.ini file.

• New site and I feel certain it IE compatibility issues

  We used Dreamweaver CS5.5 to create a site.  Everything works fine in all browsers except ie9.  The image in the middle of the page 'about' is at the bottom of the page instead on the move and the workplace (from top down) and if you click on the compatibility mode, the image moves in the right position, but we lose all our headers.

  I know there must be either a simple hack I need or my code is disabled, but when I run WC3 validation, the number of errors I have (which I am) are not, and if I run the browser compatibility check, once again, none of the listed items applies to these issues.

  Any help is greatly appreciated.

  See the site here.

  The following style rule is the cause of the problem:

  IMG {}

  border: 0

  vertical-align: top;

  text-align: left;

  }

  Delete the vertical-align and text-align of the rules, and the image is displayed correctly.

• Plex and my readynas 102 and access

  I have installed the plex server in my ready nas, but for some reason when I try to access it from my TV to shield any nvidia tells my that I have to update the software and I have the latest software iny ready nas, k don't know what to do next...

  Now my other question is, yesterday my modem atoped of work and for some strange reason, I couldn't access my nas from my laptop, do I need internet to access my nas? I have hard is a storage unit, I can access my network without needing internet, maybe I'm doing something completely wrong here...

  Thank you all for your visit

  This TV access other devices on your network or on the internet?

  Looks like it could be a network connectivity problem.

• ReadyNAS 102 with 6.4.1 alerts not configurable

  Hello

  I have a 102 ReadyNAS, bought two new drives and a factory reset to install readyos 6.4.1.

  Now I can't set up email alerts.

  I enter a new contact and e-mail options complete (server, etc.). After hitting the testmail button, it takes a while and I get the message "testmail could not send." But the email is sent correctly. Under alerts, "e-mail service to send alerts is not configured" is still there. When I hit the reload all my alert settings are lost.

  What's not here?

  I found the problem!

  It comes to IPv6. My email provider seems to have problems with ipv6 in some cases. With a name of dns ipv4-mailserver, it works now.

• Cannot access admin (ReadyNAS 102) Panel

  After turn on my NAS gets 192.168.2.25 IP address, I can ping from my PC. Power led blinks constantly after power to the top, I can't disable it only by unpluging power cord. I can't access Admin Panel by browser (connection refused) in Chrome and IE. I tried the procedure of resetting factory and OS reinstall that brings no improvement. RAIDar software is the realization that one SIN, but the firmware version is empty, so I guess there's the problem. Is there a way I can download the firmware - for example from USB when I have no access to admin panel? I am very disappointed because this is the State of the new product and my business really needs it goes fast...

  Hello CPR,

  Welcome to the community!

  The operating system and data are saved on the disc that is inserted in the ReadyNAS chassis. Without the records, there is no, you will not be able to access the admin page. SSH is also disabled by default, so if you want to access via SSH, you must Access the first admin page and then allow it to from there. Telnet access is designed for engineering and support of L3.

  Kind regards