ReadyNAS Pro 6 (RNDP6350) problem of CAE?

Similar Questions

• Amount of data lost after replacement of disc on Readynas Pro 6

  Hi, I just came across a serious problem, and I hope someone can help me.

  Currently my Readynas Pro 6 does not see no matter what volume the 6 X-Raid Array disk more.

  I walked past my NAS one a few hours ago and saw the display flashing with the message that the volume has been degraded. A little strange as I had not had any warning about the deterioration of the disc before. I have identified the disc (#2) and replaced by a spare part that I had prepared for such occasions. After the reconstruction has been completed the readynas showed the message that the volume was still degraded: about 5 to 10 minutes later the identified readynas drive 5 must be replaced. Two drives at the same time? I don't have another spare drive, so I thought of making a scrub to see if that would make a difference. The scrub my NAS on the timer go out. When I restarted it, it had lost its range X-Raid.

  Anyone have any idea if I can solve this? The pro6 nas Works 6.2.4, the admin interface works fine, I have access to log files.

  Erik

  Yes, required that windows file systems.

  Obviously much cheaper than any professional collection service.

• Management Services is offline readynas pro 6

  I rebooted my NAS this morning and it does not load the admin page, I can access some applications via the ports, but not the admin page.

  Any help would be greatly appreciated, I have no idea how to solve. Well above my pay grade.

  Its a readynas pro 6 OS6, I officially running has no support. I really want to avoid a reset nothing can save. SSH logins fair we currently I enter a user name.

  See you soon.

  I sent you a PM.

  Really, you should backup your data.

  Any important data should be stored on just one device.

• ReadyNAS Pro 6 - Pro Support

  Hi all, I'm looking for more details on the pro for my Readynas Pro 6 support. However, when I called support they advised only per-incident support is available. The reason why I ask that it is the customer that I support has no real technical knowledge and it's always a matter of concern for me when I am not available. It would be good if there was a service I could buy so they could call an experienced support engineer who could go to distance effectively and help them if I wasn't able to. Thank you...

  It is what it is.

  The 314 is a suitable replacement for the Pro 4. It has a faster than the Pro 4 processor and double the RAM. However, it is not as powerful as the Pro 6. It depends on the use case whether it is appropriate.

  The 516 has a better processor than the Pro 6 and 4 x the RAM.

  Yes, you can run double redundancy on the 314. A system of 4-Bay double redundancy would be the capacity of the smallest disk.

  Rackmount the 3130 or for a 12 - bay 3220/4220 according to budget would be the way to go.

• ReadyNAS Pro 6 is stuck at the start...

  The ReadyNAS Pro 6 is running OS 6.4.1. It has 6 x 4TB Seagate disks and runs since sept 2013 OS6.

  1.5 weeks ago about the NAS got does not. The screen was black and did not respond to the power button. Also, there not respod on SMB, HTTPS or SSH application.

  I held the power button for a hard reset, the system was running from 21 to 24, then it's the same thing. I did a hard reset with the power button, but the system got stuck on Booting... I have powered the 25 and the start menu. I tried to run a test drive, he counted records (indicating the disk numbers) and has begun to rise 1%. The next morning the system still worked Testing (remember exact) just read on the screen.

  Now I tried to reinstall OS, but the system has been slain at the start... FW update (no figures for disks are displayed on the screen). I guess the next thing to try is the recovery from USB?

  Replied to your MP that you sent earlier this morning.

• MacBook pro 15 "heating problem

  My MacBook Pro that I bought in early 2015, has recently started abnormally warm under normal workload.

  I started facing this problem last month. Is what I run Firefox, watching videos on YouTube. Within a few minutes, the fan starts and the bottom heats up to an unbearable temperature.

  I followed most of the steps in order to maintain well ventilated, but often I tend to keep my turn.

  I checked the activity monitor, and it doesn't seem to be any application other than my web browser that uses the CPU. I even rebooted my mac a couple of times hoping that would solve the problem but it didn't.

  Help, please!

  Try resetting the SMC http://support.apple.com/kb/ht3964

• How can I solve very slow scrolling with the mouse when you press the command key? (MacBook Pro, Lion, no problem when using trackpad, no problem with other web browsers, other mice have the same problem)

  Scrolling speed is fine, but when you press the command key and then it becomes very slow.

  He does it with a mouse, but not with the trackpad.
  It does when the modules are disabled.
  No problem on Safari or Chrome.
  No problem on PC.

  I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.

  Any help would be much appreciated.

  Thanks in advance!

  You use the mouse wheel to scroll?

  There are some prefs mousewheel, which control the behavior when you press the modifier keys.
  
  You can set the key to the action of each to 0 for normal scroll.

  See http://kb.mozillazine.org/About:config_entries #Mousewheel.

• Start-up network on HP Compaq Pro SFF 6300 problems

  We use LANDesk Management following the image of our machines when they arrive.  We have just received a new shipment of 6300 Pro and we are unable to get them PXE had.  I'm unfortunately not on the site with workstations.  We get a server timeout of response time when network boot. Technicians are invited to select IPv4 or IPv6.  After selecting the IPv4, it displays:

  Check for the presence of media

  Media present

  On IPv4 PXE boot

  Then the computer starts Windows 8 Image of HP.   We have not had this problem with any other Pro 6300 in our environment.  What needs to be changed in the configuration of the BIOS for it to perform a PXE boot correctly again.

  HP Compaq Pro 6300

  BIOS: 2.85

  Found the fix.
  In the BIOS-> Security-> start secure Configuration-> Legacy Support = on
  Secure Boot = disabled

• Toshiba satellite pro m30 USB problem

  I have toshiba satellite pro m30 and HP scanjet 4600 scanner.when I connect the scanner directly to the notebok with its ' original usb cable there is no problem. But if I connect the scanner to the laptop with a laptop usb extension cable cannot initialize the scanner. There is no problem if I connect the scanner to the VAIO laptop with usb extension cable. What can I do?

  Hello

  could you describe the difference between the original USB cable and the USB extension cable?

  The laptop and the printer works correctly with the original USB cable, but it seems that the extension USB cable is an inexpensive which does not fulfill the technical specifications and the laptop has a problem with this issue.

  To solve the problem in my opinion you could do an update of the BIOS, look if for your printer is a new driver available and reinstall the USB drivers.

  Also, you could test whether USB, the same problem occurs with other cables.

  Bye Bob

• Satellite Pro M10 - network problem

  I have a M10 Pro Satellite bought used a few days ago and formatted, reinstalled windows (XP Pro, got a firewall on it, then my internet connection (Tiscali) and then went on the Toshiba site to download the drivers that I don't have the CD with the machine.

  My problem is that it is showing "Network cable unplugged" even when I plug a RJ45 cable to connect to my corporate network. On Toshiba download page has only an Intel utility to uninstall, it is show a network card in Device Manager, even if I don't have a network controller and Ethernet Controller unknown flag. I tried to install the Toshiba Fast Ethernet Driversguide.com Driveres but it still does not recognize that I plugged in the cable.

  Can someone help me out here?

  Hello

  Can be a value of tcp/ip to uninstall and re - install.

  Right-click the LAN connection icon, select Properties.

  Select tcp/ip, and then click Remove.

  Then, you need to add tci/ip.

  Plan b is that you have a bad cable, or perhaps the ethernet adapter is dead (which happened at ~ 10 IBM Thinkpads here).

  Good luck.

  Nige

• Satellite Pro M30 modem problem

  I have a portable Satellite Pro M30 and I try to install the modem driver. Everything is ok, but the modem has problem. In Device Manager, it seems to be fine without conflicts. Each time than trying to query the modem of the property page, it shows me a message concerning the opening of port.

  I read a lot of articles and I thing the problem, this is the version of the driver. The driver that I use is the SM2138ALD04 version. Have any ideas?

  Hello

  I agree with you, I found also several threads to have reported similar problems with modems
  No doubt this procedure will help you:

  -go to the Device Manager and remove and uninstall the modem driver
  -Download the latest modem driver
  -restart the OS and reinstall the modem

  Please report did it

• Satellite Pro C50 keyboard problems - A - 1 L 6

  Hello

  I just bought this new Satellite Pro.

  I have installed all the drivers and updated the bios to the latest version, but I still have the same problem: when I write, many times my keyboard writes double letters (for example, all ten words written keyboard a letter double, as "keybboard").

  I tried also to change the properties of the keypad on the control panel of Windows 8, but nothing has changed.

  I called support, but they just told me that I have to bring my laptop in a helpdesk: but I need my new computer to work, and I wouldn't be happy to lose at least 4 weeks!

  And, support told me that, if the laptop has no hardware problem, I would have to pay for assistance...
  .
  So, this is my first experience and unlucy in the world of Toshiba...
  Is there someone who can give me some advice to solve this problem?
  It may be a problem running on the new laptops, and someone knows how to fix this?

  Thank you very much!

  Hi guys,.

  As far as I know that these similar keyboard problems in the past could be resolved by the BIOS updated.
  I found the new BIOS for Satellite Pro C50 - A
  http://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20140912105436.zip
  Worth a try

  Another question: If someone has done to test a USB external keyboard?
  In the case where the external USB keyboard would work correctly, this issue isn't associated with BIOS or keyboard controller but probably his keyboard fault internal.

• Satellite Pro C660 - keyboard problems

  This issue is one for computer laptop Toshiba Satellite Pro C660-1UX running Windows 7 Home Premium Service Pack 1.

  Some of the keys on Board (E, T, U, I, O, A, B, N, and the Enter key) fail to register.
  All keys tested so far seem to register normally.

  When you connect an external USB keyboard, all the keys work properly. When you use the integrated keyboard or external USB keyboard, however, pressed some key is selected for about 2-3 seconds so that his character register. This makes typing incredibly slow and is naturally unacceptable.

  I checked the Manager of devices looking for errors, but can't find one. The keyboard driver is classified properly installed and functional, and driver update indicates that the latest version is in already in service.

  I've also scanned for viruses using Spybot and Malware bytes and also with laptops own antivirus software pre-installed. All the analyses of the entire system refer a none found the message of threat.

  I read that the keyboards on these machines can sometimes be problematic, which could respond only to edge, some function keys. The fact that all the external USB keyboard keys work seems to confirm this. However, the fact that the keyboard both onboard and external is affected by the same slow pressure might also suggest a bios problem - but that this laptop computer is several years old and working perfectly, why bios suddenly would cause this problem.

  I visited the Toshiba site and based on this laptop with the part number: PSC0ME-02100SEN, I have concluded (rightly or wrongly) that the correct bios download version is 1, 70 - WIN, only when I read the following installation instructions http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm bios
  I became quite concerned, like installing the bios update seems far from simple.

  Does anyone know if it is possible to download and install the bios right through an update automated versus manual download and installation step by step, which, if not carried out as planned, could make the laptop completely unusable.

  Has anyone reading this post experienced similar problems with this make and model laptop and was able to return successfully to the good operating condition. If so, how?

  All constructive advice would be welcome.

  > When you connect an external USB keyboard, all keys work correctly.

  This means that the keyboard controller is OK and the internal keyboard is defective.
  To resolve this problem of keyboard, internal keyboard needs to be replaced.

  > However, the fact that the keyboard on board as external is affected by the same keypress slow could also suggest a bios problem - but this laptop computer is several years old and works perfectly, why bios suddenly would cause this problem.

  Hmm I n t think so
  The keyboard delay can be bound to parameters.
  You can check this in the control panel-> keyboard

• Satellite Pro C850 - strange problem with LAN connection

  Hello world

  I just signed up on this forum because I hope you guys can help me with a really strange problem.

  I recently bought a Satellite Pro C850-1MX
  It came with Win8, but given that I don't really like Win8, I bought an additional Windows 7 Pro (64 bit) license and installed on the laptop.

  The problem I describe, also arrived on 8 to win, which makes it even more strange.

  As soon as I connect a cable to the RJ-45 port, Windows tells me, that the LAN connection is not connected.
  As soon as I unplug the cable, Windows starts looking for a network and actually found one!

  So, the only way to connect to my LAN cable is... I have activate the LAN connection, wait that it detects a network (without the cable connected!) and meanwhile to connect the cable to the network port.
  Now... If I disconnect the cable once again, Windows still shows its connected.

  I must say, that I am a Director of professional network for more than 10 years now, so I should know my systems, but this never happened to me before. Event log shows nothing, re-installing drivers did nothing either. IM quite confused here and I hope you guys can help me.

  Thanks for reading, and let me know if you need any additional info!

  Greetings from the Germany,
  Sandro

  Hello Sandro,

  To be honest I confused m.

  I would try to start talking about the drivers installed, since you changed the system for Win 7.
  All the network devices, such as card WLan and LAN card are properly recognized in Device Manager?

  As I m not wrong not the laptop was equipped with a network card Realtek-8111F (1000BASE-T/100Base-TX/10Base-T) and WLan RTL8723AE Realtek b/g/n card.
  If both should appear in the device properly Manager if you have installed the drivers correctly.

  2nd question:
  You said:
  > As soon as I unplug the cable, Windows starts looking for a network and actually found one!
  Are you sure that you speak of LAN and WLAN?
  For me it made no further since. If the network cable is unplugged, the notebook would connect to the WLan where WiFi is enabled.

• iPad 9.7 Pro WiFi connection problems - 5 GHz

  My brand new iPad 9.7 Pro is having major issues remaining connected to my home WiFi 5 GHz channels. The connection drops approximately every 30 seconds and I have to manually add the network in. Also, when he reconnection does not always have the password, and it takes several tries before it finally accepts it.

  Curiously, the iPad is strong when it is connected to the 2.4 GHz channel and has yet to give up this connection. All my other devices (two iPhone 6 and old iPad) have no problem to stay connected to the 5 GHz channel so I know it is not a problem with the router settings. But just to be safe, I put all the router settings to those listed here: recommended for the WiFi routers and access - points Apple supported

  That has not fixed the problem.

  Then I went to the Apple store to see if they could help me and they ended up exchanging for another iPad. The same exact issues exist with the replacement. I even made sure to not restore from a backup and configure the replacement as a NEW iPad iPad. I then tried to connect to WiFi with the pre-installed operating system and always had the same questions. I then updated the iPad the latest OS 9.3.1 and it always shows the same questions.

  I am at a loss for what to do next. I plan to return the iPad 9.7 Pro for the second time in two days. It was not ready for release.

  General suggestions for Wi - Fi problems, maybe one of them will help you...

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (4) turn off the QoS service on the router if available.

  (5) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (check manufacturer support Web site). Check that your router is certified Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.