Reboot to factory

Similar Questions

• Reset satellite L350-12 q to factory settings

  Hello

  I really need help to reboot my laptop to factory settings, because it became too slow Strip.
  I don't have a lot of files on this subject and want it reboot to factory from scratch.

  I watched online videos telling press 0, when starting and expect the long beep but mine does not work like that it still normally starts?

  Can someone help me please?

  Thanks in advance!

  Hello

  If you want to drive recovery installation HARD do as described on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  Another option is the use of the bootable recovery DVD disk if you created a.
  If your laptop still have factory settings please create recovery disk using the preinstalled Toshiba Recovery Disk Creator.
  If the installation of HARD drive recovery won t work job created recovery DVD.

• Lenovo G50 factory reset - 80 questions

  I have a laptop G50-80, which has been upgraded to Win10 quite earlier. Recently he started having trouble with hardware and software that worked no longer works. I decided to use the reset option factory to return the system to Win8.1.

  Before doing so I downloaded the more critical of my files from the user to a Cloud Computing service and created a recovery image of windows on a SSD connecterd external via USB. I also created a system restore CD.

  Once I felt, it was safe, I pushed the button and started the factory reset. It has worked flawlessly, the system came in Win8.1. However, the files that I had uploaded to the cloud is not fully spread, and I needed to restore the image of Win10 to get back them.

  After several attempts to get the Win10 upgraded to work, I finally got to Win10 boot and restore the image of the SSD system. I found the files and was more securely save for later access. Now, I had to perform a factory reset more to return the system to Win8.1. But operations to do so led to restart the system for the installation of Win8.1. He was not able to start the factory reset.

  Some reading on the internet indicates that if the HD partitions are written in software other than the Lenovo OneKey tools that any attempt to use the partitions of the factory to do a reset would fail with the symptoms that I saw.

  Using the Win10 disk management tool, I see that there are 6 partitions on my hard drive. They are called "Recovery Partition", "EFI System Partition", "OEM Partition", "C:", "D:", and "recovery Partition". I don't see anything on the first 3 or last one of them. It doesn't seem to be a file system to set up, so I don't know if the data has been preserved.

  Is there something I can do to recover the factory software reset so I can restore this system to Win8.1?

  You may need more information to help. I'll be happy to provide all that you think you have need. Let me know.

  Vince

  I found an answer that seems to work for me. I am currently at 12%, restore the factory settings. Check out the instructions here:

  https://forums.Lenovo.com/T5/Lenovo-beacon-stick-300-D-J-and/Windows-8-recovery-partition-not-recogn...

  After the execution of these instructions, the novo button does not. From the Lenovo OneKey app doesn't. I had to reboot to factory settings using the windows restore utilities. Before running these instructions, the third partition of the provided factory restore option was not available. This time it was and the restoration continues.

  If I don't come back and say otherwise, assume the success!

  Vince (13% now)

• Cannot connect to Internet after factory reset?

  Impossible to connect to wi - fi at home one day, several days of troubleshooting with nothing finally end up making me a reboot of the complete plant of work. still unable to connect to home wi - fi, but can connect to the hotspot public mobile and wi - fi. Three other devices in the House can connect to wi - fi without a problem. tried for days with each difficulty that I can find on the internet. System Restore, proxy settings, flush DNS, update drivers, the rest of the internet settings, reboot to factory... Do not understand how the restart of the plant hasn't solve the problem! someone at - it ideas? Troubleshooting the connection either gives me ' serves him DNS does not "or sometimes"the remote device or resource accepts the connection.

  Hello Mary,.

  Thanks for posting your question on the Microsoft community.

  I need additional information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem can occur for the following reasons:

  -Wireless adapter switch is not activated.
  -WEP, WPA or WPA2 key or password security issues.
  -Cables are not connected properly.
  -Corrupt or incompatible drivers.
  -Missing updates.
  -Incorrect network connection settings.

  I suggest you to perform troubleshooting network adapter and check if it helps. Please follow

  the following steps:

  a. press Windows + C keys together, and then click Search.
  b. type Troubleshooting in the search box and click on it in the search results.
  c. click on "display all" and then click on 'network card'.
  d. click on 'Next' and follow the on-screen instructions.

  If this does not help, follow the steps provided in this article, and the check.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Default factory settings zero action

  If I do a restart of Setup factory default my computer will be that it was when I took it out of the box?

  If this isn't the case, Dell provide me with with reboot discs?

  I have the Image .exe-Bad bug. Hope a reboot to factory default will kill him.

  Thank you, The Pixman

  Pixman44

  If this isn't the case, Dell provide me with with reboot discs?

  Always include the PC model and the version of Windows in your messages.

  If the warranty is still active, and Dell has available disks (for example, XP disks are probably more available). Otherwise, they can refuse or charge you for disks.

  The factory reset should restore your system to its out-of-the-box state. But you will need to install all the patches, updates and Service Packs published after you obtained the Microsoft System.

  Keep in mind that you will lose all everything on the disc hard order to personal files should be backed up on an external first and you have the installation disks and product keys for any software that you have installed, for example Microsoft Office.

  You can go to www.spywarehammer.com and sign up for FREE , the malware removal assistance. Maybe they can help you to avoid doing a factory restore. Some experts are also members of this forum and they work fantastic conclusion and kill malware.

• HP TABLETS 7 6102 RA SLATE: ERROR UPGRADATION OF KITKAT JELLYBEAN

  Last day I had and pop up on my HP Slate 7 voice tab upgrade jellybean to kitakat. When I pressed the upgrade, after treatment, he went to error mode. I took an online help and I downloaded the UPDATE. ZIP for ra tablet hp slate 6102 7 in the INDIAN region.

  Today, I went to a store and use than the software to update my Tablet using the map D S.

  It is same as it happened.

  So I press volume down and upward and the power button at the same time it will produce that the appliance is in MODE PRODUCT.

  How can I solve this problem?...

  Pls Guide.

  Model is HP Slate 7 6102ra voice tab

  I'm ashamed of you guys. And I am angry with you also.

  My Tablet has NO OPERATING SYSTEM.

  I need solution.

  http://support.HP.com/us-en/drivers/selfservice/HP-slate-7-voicetab/6825090/model/6967699

  I select the version of India and I boot it in my camera.

  But half of the installation it's going to step aborted and an error has showned

  It's

  error on package.zip

  Today, I saw a new version of 557 MB image restoration

  I want to check once more.

  I TRUST HP.

  Sorry to have bought a tablet on your part.

  I am very pleased in the performance of this tablet.so that ' I NEED a SOLUTION.

  Malygris1 wrote:
  

  @EbinKBaby,

  Thank you for the updated information. You tried to perform the hard reboot or factory reset on your VoiceTab?

  For a hard reboot press on and press and hold power for more than eight seconds. Once the tablet shuts down completely, wait a few seconds and then press the power button to turn on the tablet. If the Tablet does not start, try a factory reset.

• Outputs unexpected Safari

  Why my iPad, using iOS 9, return to the home page it when you use Safari?

  restart restart your iPhone, iPad or iPod touch - Apple Support

  If this help not reboot to factory settings using iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory - Apple Support

• Update player for Pavilion DV6000

  Hello

  I have a Pavillion DV6000 (p/n GG181PA #ABG) & to upgrade the HARD drive with a larger capacity SSD, the hybrid or the car standard.

  Is there an update available for this laptop compatibility matrix?

  Thank you

  Tom

  Tom_Gannon wrote:

  Hello

  I have a Pavillion DV6000 (p/n GG181PA #ABG) & to upgrade the HARD drive with a larger capacity SSD, the hybrid or the car standard.

  Is there an update available for this laptop compatibility matrix?

  Thank you

  Tom

  If you're going to SSD you will need to spend a lot for a larger capacity drive compared to a HARD drive for the same capacity. FOR INFO. I'd do it if you don't not task training resources program go with HARD drive they are now up to 1 TB and some will be a little more and better serve you because your HP is an older laptop. If you upgrade the drive to ensure that you clone on the new HARD drive, otherwise you will need to use your recovery factory media and reboot to factory install to use the new disk.

• continuous beep on startup top and dysfunction following press set to date. __

  I have a Vaio FE41E with Vista Home Premium.  2 days ago, that he began to beep continuously start and hang until I pressed F12. Then he would start but the touchpad has become inoperative and it started flashing uncontrolled through menus, drop-down boxes and radio buttons.  After that the hours spent trying to solve, including several restorations system several times, I did a full reboot to factory settings.  All right, including the installation of SP2, but today the problem comes back again once.  It could have been caused by another update.  Does anyone know what update could be the cause of this problem?  Or is it something else?  Thank you very much.

  If you have a sound problem, which is normally a sign of hardware problems.

  http://www.pchell.com/hardware/beepcodes.shtml

  http://www.5starsupport.com/info/beep_codes.htm

  See if the foregoing gives you an overview of your beep problem.

  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  "How To Troubleshoot Codes sound"

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  To diagnose issues of update:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Wifes computer

  She had a vires so reset to factory settings after starting windows re remained in installiton to wear soft windows live essentials 2011 21/27. How are we past this? system OS is windows 7 64 bit, I have also a recovery disk windows 7 that I bought on eBay if this helps solve this problem, there is also no home screen just the software installation screen after reboot to factory settings,

  I personally would like to exclude updates recommended installer with important updates of reality by changing the settings of update of these,

  

  

  Then follow these instructions

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

  If looking for updates to hang on a current installation,

  Switch your windows update setting to never check the updates temporarily

  Restart the machine

  Then you download this from your download folder run from there.

  https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

  Download the x 86 for 32-bit or x 64 for 64-bit

  Install it and restart when prompted too after he did a search of stand-alone for updates that should not

  take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check

  updates before running from the downloads folder.

  Once it installs and restarts

  You can reset your updates affecting everything you had before default =...

  Then check the updates manually.

  I think that the solution came from Softpedia and Joel_CS posted on this thread,

  http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

  You must scroll down for Joel SC post threads, it is the last answer on this page,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

• EX60 - lost the connection with the control device

  After upgrading my 6.3.1 to 7.1.1 EX60 I get now "Lost connection with adjustment" and the touch control panel is located in a loop of spinning.

  I also get the following in the web interface on the EX60 management:

  ERROR: Connection of the touch panel

  No touch screen detected when indicators forced
   

  If I go down to 6.3.1 it works again. I already rebooted and factory resets the device unplugged and reconnected the touchscreen.

  Hello

  Have you tried a factory reset touch by organizing the "!" symbol for 10-15 seconds seconds until it turns on and then pressing "mute" button two times.

  Video posted on the following link

  https://supportforums.Cisco.com/video/11930611/resetting-Cisco-teleprese...

  HTH

  Manish

• computer running slow

  I bought an asus computer with windows 8 built in him, I've only used the computer for course and saving images on it however, I downloaded Microsoft and security, because he had not, but something went wrong and I had to reboot to factory settings and downloaded again Microsoft and everything was fine but a bit slow. Now, today, I got a message telling me that there was a problem with the computer and now it works very slowly.

  can someone help me please

  Have you seen a message like this?

  

  This means that the site has a script that takes a long time to run, and the page cannot continue executing until the script is done.   The script may have a programming mistake that requires him to never fill, which means that the site is "not responding" and you'll have to close it.

  This type of error is generally not something you can stop - only website programming team can fix the script error.  The best you can do on your end is to disable scripts, but that will usually almost all modern sites unusable.

• battery not charging travelmate p253e

  Can someone tell me why my battery won't charge while it is plugged? It is not bust because he did not have when I did a reboot to factory setting, it successfully takes care to about 60% in the four hours it took to restart. It also before doesn't work not started to turn off the computer at 40% of autonomy. The computer is only a 4 month, thanks Jason

  This (assigned to) a forum for those who need help for questions on viruses and malware.

  Try Acer Support: http://www.acer.com/worldwide/support/

• What is the problem with my iphone? He says still no service but my sim card works with other phones, after a reboot it says searching until I have to remove and reinsert the sim ive done all what is the factory reset to open the phone to verify any damag

  IPhone 6 64 gb

  iOS 9.2.1

  The phone says no service but the SIM card works, everything in the phone works except the flash still lights up and flickers sometimes before becoming stable but who don't mind not 'that' much, ive tried factory reset and everything, ive also open the unit and looked for signs of damage, the phone knows there is a SIM card in the phone , but he never says the name of the carrier, also after the restart he said looking and does not stop until I have remove and reinsert the SIM card.

  You can restore the factory state after an iTunes backup

  If this does not resolve the problem then you may want to align on Apple or an approved repair shop

• laptop resets date and time back to factory on each reboot. Also removes the drivers for the cards and the outlook settings.

  Machine removes the drivers for the wireless card, also changes some settings in outlook after each reboot.

  Hi Jim,.

  You could try replacing the CMOS battery, as it appears to have failed.

  http://www.computerhope.com/issues/ch000239.htm

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.