Reconstruction of a standby

Similar Questions

• Accidentally open a standby database: can I return to standby mode?

  Hello world

  I accidentally opened a physical database Eve (I shot to the top of the body of Eve with "START" instead of the usual "STARTUP MOUNT" command)

  Do I have a chance to return to mode standby without duplicating fully all the data files in a full reconstruction of Eve? (Bandwidth network between the main site and will mean hours of copying files between sites).

  
  something like:

  1 / stop immediately the mistakenally open mode standby; in fact already done ;-)

  2 / create new control on primary eve files and copy them on standby

  3 / copy the logs to check-in to the main site in standby mode

  4 / re open an instance sleep and hopefully recover the gap between the standby and primary

  We are running Oracle 10 g 2 with dataguard.

  Thanks in advance!

  Jose

  JO * 356268 * os wrote:

  Hello world

  I accidentally opened a physical database Eve (I shot to the top of the body of Eve with "START" instead of the usual "STARTUP MOUNT" command)

  Do I have a chance to return to mode standby without duplicating fully all the data files in a full reconstruction of Eve? (Bandwidth network between the main site and will mean hours of copying files between sites).

  something like:

  1 / stop immediately the mistakenally open mode standby; in fact already done ;-)

  2 / create new control on primary eve files and copy them on standby

  3 / copy the logs to check-in to the main site in standby mode

  4 / re open an instance sleep and hopefully recover the gap between the standby and primary

  We are running Oracle 10 g 2 with dataguard.

  Thanks in advance!

  Jose

  Looks like you think more complex

  If you accidentally open eve of Galzain READ ONLY instead of mount status, then you can safely stop and then again start in State.

  But the following description that you mentioned, I did not understand. Your watch was already split and it works well and that you opened before in OPEN mode? Is that your question? If yes no need to worry about follow below steps and nothing to restore controlfile or something Eve elementary school.

  (1) immediate closure

  (2) startup mount

  (3) start MRP

• Db recovery mode standby idle DG and lag for days.

  We have a 2 RAC primary node and a node 2 RAC qa ensures environment under redhat linux.
  
  There are two nights some interviews caused primary down, and db switched to standby mode. and now I've discovered by dgmgrl the following error:
  
  DGMGRL > see Configuring
  
  Configuration - oraqa_dg
  
  Protection mode: MaxPerformance
  Databases:
  orasqa - primary database
  Error: ORA-16810: multiple errors or warnings found for the database
  
  oraqa - (*) Physical standby database
  WARNING: ORA-16829: accelerated failover configuration is trolling
  
  Fast-Start Failover: ENABLED
  
  The configuration status:
  ERROR
  
  DGMGRL > failover to oraqa
  Perform the failover NOW, please wait...
  Error: ORA-16600: not connected to the database target of standby for failover
  
  Failed.
  Unable to failover
  DGMGRL > passage to the oraqa
  Continue to pass, please wait...
  Error: ORA-16810: multiple errors or warnings found for the database
  
  Failed.
  Impossible to failover, primary database is still "orasqa."
  
  I started to recover standby database managed using disconnect log current;
  
  and see an a MRP of the running process node, but the other node does not.
  
  recovery mode is inactive and without recovery from media alert logs.
  
  
  
  TIME TO NEWSPAPERS
  ---------------- ------------------------
  Last application: 21 - FEB - 13:01:16:34
  Finally received: 21 - FEB - 13:01:16:34
  
  UNIT NAME VALUE
  -------------------------------- ---------------------------------------------------------------- ---------------------------------------------
  apply day (2) over time to second interval (3)
  apply the day lag (2) second interval (0)
  about 32 seconds startup time
  day (2) lag transport at second interval (0)
  
  Calculated time: 22/02/2013 15:23:10
  
  How can I get media recovery began?
  
  Another question, I discovered through crsctl res stat, the db pending status intermedia.
  ORA.oraqa.db
  1 LINE intermediate oracle02 Mounted (closed)
  2 (closed) mounted INTERMEDIARY online oracle03
  
  Please advice what I can do from this point.
  
  Thanks in advance.

  982335 wrote:
  updates:

  I finally got all the reconstruction work the day before (previous primary) primary (previous standby).

  Now everything works.

  However, I want to the previous primary crossing as primary.

  What do I have to configure anything to keep him there as primary?

  Thanks in advance.

  Uh, waiting for reconstruction is not the right solution. I expect not to rebuild the day before. I prefer to troubleshoot and resolve the problem. If in case there is no information of what I asked in my previous posts, then in the worst support we can take tips from Oracle Support.

  So that you, me, everyone can learn what it exactly was behind all this. Next time, I suggest to "Troubleshoot & problem" rather than rebuild. :)

  >
  There seems to be network problems and I can not say exactly.
  I will propose to show all files of newspaper broker after issuance of 'view' to restore order?
  also relate alert the log file for any type of information.

• DG - complete reconstruction of the question of the installation

  Hi all
  
  I'm looking to rebuild the configuration spfile/dataguard whole, Carrie for a current primary/secondary dg environment.
  
  My question is about the question to know if I can stop simply Broker + transport newspapers, stop both their start up with the spile files newly built without having to recreate the database physical standby?
  
  Thanks in advance
  
  Jan S.

  jstem1177 wrote:
  Hi all

  I'm looking to rebuild the configuration spfile/dataguard whole, Carrie for a current primary/secondary dg environment.

  My question is about the question to know if I can stop simply Broker + transport newspapers, stop both their start up with the spile files newly built without having to recreate the database physical standby?

  Thanks in advance

  Jan S.

  What is your version?
  There is notion of reconstruction/recreate the Dataguard broker.
  This remark to recreate--> * Step By Step how to recreate Dataguard Broker Configuration [808783.1 ID] *.
  or
  check that mseberg mentioned notes with step by step how to create a Configuration of Dataguard Broker [984622.1 ID]

  But why you think SPFILE? It's just a configuration file. What you want to change it? Are there changes in the parameters of sleep? All the sleep settings are dynamic parameters except DB_UNIQUE_NAME, I guess...

  If you have decided to change SPFILE, then

  (1) disable the primary log shipping
  1.1 drop Broker configuraiton on primary & eve
  (2) stop the day before
  (3) make changes SPFILE
  (4) startup mount
  (5) configure broker
  (6) allow log on primary shipping & start MRP pending.

  HTH.

  Published by: CKPT on June 15, 2012 12:09 AM

• What / Standby button?

  On the Iphone 6, what / Standby button? What is this for?

  This page of the iPhone user Guide explains the functions associated with this button.

  http://help.Apple.com/iPhone/10/#/iphd290bfdd9

• Leave standby with fingerprint

  ON my iPhone and iPad, I used to leave standby simply by putting my finger on the home button (do not press).

  After the update, it's is not possible! I always press the button at the tea house and then continue with the contact ID. It is not so elegant and simple like betore.

  Settings > general > accessibility > Home button > to open finger rest

• I improved my 5s IOS10 3 days and battery discharge excelerated standby, as well as when you use. I turned off notifications, as, other non when not in service. Which could operate in the background?

  I improved my 5s IOS10 3 days and battery discharge excelerated standby, as well as when you use. I turned off notifications, as, other non when not in service. Which could operate in the background?

  Hi mweedn!

  I understand that you see a reduction in the battery of your iPhone 5s after updating to iOS 10. It is important to be able to make full use of your iPhone! There are a few resources that can help.

  Before the resolution of the problem, were you able to view information using your battery on your iPhone? Here's how to check the amount of battery used by each application:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you answer, remember to let us know if you see all the apps with an abnormal amount of battery. See you soon!

• Issues of reconstruction of mailbox

  I'm looking to fix my IMAIL. extremely slow, difficult run to the same type a sentence without her stall all 10-15 sec. I was told to reconstruct each mailbox? do I need to backup emails in them if they are gmail accounts? I'm afraid of losing all my information on work and emails. ?

  Be on the safe side please take the rear of all mails before reconstruct you each mailbox.

  As some messages may be deleted from the server, or if the network speed is slow, some emails will not be downloaded successfully.

  Thank you!

• When I close the lid on my MBP, it goes to "Standby" to "Hibernate" why?

  My MacBook Pro for six years had been working perfectly until about a month earlier, when he stopped to stay in Mode standby when I closed the lid.

  With the lid closed, initially, he goes to sleep, but after about 30 seconds, it goes into hibernation mode and to turn on again, I have to press the power button. I then get a grey screen and no use of the trackpad. Shortly after, the gray screen disappears and the machine works perfectly.

  The battery life is very good (68%), I have reset the SMC and I have not loaded the new software. The only thing I can think is that this started to occur at the time of the last update of Safari.

  Does anyone else have this problem?  Comments or suggestions are appreciated.  Thank you.

  Hello, Spring Lake Bob!

  Thank you for using communities Support from Apple. After reviewing your post, I understand that your MacBook Pro sleeps as expected when you close the lid. Instead, it goes into a hibernation mode that requires you to press the power button to interact with him again. I certainly understand wanting to make sure that the computer sleeps when it should wake up how it should. I'd be happy to help you!

  Get help with your situation, I would say using the article below the link to help isolate and solve the problem of sleep.

  If your Mac does not sleep or wake up when expected

  See you soon!

• Reconstruction of .xml - do not keep my tags

  I love to sort the albums in my library by artist, and then the date, and to display this way on my iPod.  To do this, I wrote a Python script that is supposed to add tags "make Album" in the file of exported xml iTunes Library, with the format "artist-Album of the YEAR.

  It's a primitive script, but I can tell this should work at least.  But when I rebuild my iTunes library since the updated xml file, it rebuilt just as it was before, without my Album out new tags.

  Here is an example of the updated xml file the:

  		< key > 1645 < / key >
  		< dict >
  			Track ID < key > < / key > < integer > 1645 < / integer >
  			< key > name < / key > < String > Tombstone Shadow < / string >
  			< key > artist < / key > < String > Creedence Clearwater Revival < / string >
  			< key > Album artist < / key > < String > Creedence Clearwater Revival < / string >
  			< key > composer < / key > < String > John Fogerty < / string >
  			< key > Album < / key > < String > Green River < / string >
  			< key > type < / key > < String > Rock < / string >
  			< key > type < / key > < channel audio file > MPEG < / string >
  			< key > size < / key > < integer > 7129216 < / integer >
  			< key > total duration < / key > < integer > 218644 < / integer >
  			< key > disc number < / key > < integer > 1 < / integer >
  			< key > disk count < / key > < integer > 1 < / integer >
  			< key > track number < / key > < integer > 3 < / integer >
  			< key > track count < / key > < integer > 14 < / integer >
  			< key > year < / key > < integer > 1969 < / integer >
  			< key > update < / key > < date > 2014-03-05T 02: 43:58Z < / date >
  			< key > Date added < / key > < date > 2016-06-11T 15: 35:16Z < / date >
  			< key > bitrate < / key > < integer > 256 < / integer >
  			< key > sampling rate < / key > < integer > 44100 < / integer >
  			< key > standards < / key > < integer > 5690 < / integer >
  			< key > County work < / key > < integer > 1 < / integer >
  			< key > Album sort < / key > < String > Green River Creedence Clearwater Revival 1969 < / string > < key > Persistent ID < / key > < String > 3962D1A1CF08D178 < / string >
  			< key > track Type < / key > < String > file < / string >
  			< key > location < / key > < channel er%20Revival/Green%20River/03%20Tombstone%20Shadow.mp3 > file://localhost/E:/Music/iTunes/Creedence%20Clearwat < / string >
  			< key > statement of case file < / key > < integer > 4 < / integer >
  			< key > folder County Library < / key > < integer > 1 < / integer >
  		< / dict >

  As you can see, the Album and Persistent ID sort keys share a line.  I don't know if this is important; I think I could solve this problem if that's the problem.  However, I tried manually add a line break after the tag Album fate and then rebuild the library again, and he didn't keep the custom tags.  Indeed, when I check "XML part" in preferences, it exports the xml without any of the tags New Album out (which makes sense, since they do not appear on the securities themselves).

  Can someone tell me what I am doing wrong?  I have found surprisingly little documentation in-depth on exactly how the iTunes library xml is parsed, so I really don't know how picky, it's command, line breaks, etc.

  Reconstruction from the XML does not update the tags in the songs. As soon as iTunes reads the tag of the file in question any external change you make is rejected. A better approach would be a modified version of my script KeywordsToAlbum wrote in SortAlbum instead, which interprets < SortAlbum > to mean the current value of the Album of the sort. The following input string would be set the values you want:

  -< SortAlbum > < artist > < year > < Album >

  You can fix it yourself if you want. I'm just on my way, but I'll post a new script later in the day.

  TT2

• A problem of user login, in the Standby Mode

  I'm the only user on my Mac. When I go to Preferences system, users and groups, my name is listed and guest said off. My question is when I turn on the computer, I automatically connect. But, when I put the computer in mode 'sleep', get out of standby the computer asks for my password. How can I disable this password option as it should automatically log on.

  The software on my mac is the Version OS X El Capitan 10.11.5 (15F34)

  Hello rskern!

  I certainly understand wanting to save time logging in to your MacBook Pro.  We can certainly check a few preferences to see if we can get it put in place how you would like.

  To begin with, what you currently see is actually quite expected.  When log you in and then the screen locks automatically (go to sleep), it may require your password as if you were switching user accounts.

  You can always be asked to manually connect after a disconnection, switching back to another user accountor your lock screen.

  Is this article: set your Mac to connect automatically on startup - Apple Support

  But we can change the time it needs of your password after going to sleep in the Security & Privacy System Preferences.  Open system preferences > Security & privacy > general.  Once you're there, you can adjust how long until it takes the password after she goes to sleep or the screen saver starts again. The basics of the Mac: display a screen saver when you are not using your Mac - Apple Support

  Thank you for using communities of Apple Support and have a good!

• my iphone won't go into standby mode

  I recently bought an iphone SE.  Recently, I noticed that my phone will not mode when connected to usb or power standby. The screen just goes dimmed, but does not go to sleep mode

  Is this normal?

  THX

  "Sleep" mode should make the display turns off. Is - this just dim halfway? If so, it is not normal.

• Reconstruction of the iTunes library

  Is it possible to rebuild the iTunes library that you can rebuild the iPhoto and photo libraries? I tried now down the command and option/alt keys while opening iTunes and that didn't work. I lost a lot of my album art and I was wondering if a reconstruction would help. With the help of iTunes 12.4.1.

  Initial post to retrieve the work:

  Retrieve Music Album art

  Bump.

• Auto standby and sleep

  My system wakes up hours even after being put on standby, and then back to mode 'sleep' in itself.

  This happens when I wake up to go to the bathroom in the middle of the night. When I get to a certain place in the hallway, I hear the 'click' in my computer room that occurs subsequently to the top. Then I change course to control the computer and I find it wakes up. He will then go back to sleep in a few minutes. Either it's haunted to wake up when I do (it seems to wake up when I get to a specific place in the hallway (*?), or he wakes up frequently while I'm asleep.)

  Any way to prevent it to wake up or get a log of his self-directed behavior?

  Try disabling "Wake for network access" and "Enable Power Nap" in system preferences > energy saver.

• Re: Satellite L750-1LU - what is the standby time battery 'common '.

  Greetings.

  I'm Rom of the Greece...
  I am a new owner of Toshiba (a few days ago) and my question is the BATTERY LIFE.
  I have a Sattelite L750-1LU and I wonna know what is the 'common' stand-by time for this laptop battery...

  When I bought the laptop (with all these countless TOSHIBA utility pre-assembled), my laptop did not stay... more... 1 HR!

  I already have a Greek contact with the technical team of Toshiba, but since they told me... the battery throughout the night the first 3 - 5 times (was... Lithium-ion battery didn't need such thing!), I wonna contacted a person non - Greek Tech.

  I already spend a few days and found a lot of interesting tips to increase the battery life, I did it, I removed the pre-installed Windows 7 with all Toshiba Utilities and I installed one pure "fresh" Win7 WITHOUT ANYTHING else (except all the drivers, I took half day... to collect) and now I think that the battery life is quite better (about 3 hours and some)...

  But I wonna know exactly what is the 'common' battery standby time, for this model, I bought.

  Please, answer me back.
  Kind regards.

  Hello

  The laptop is supported by a battery of 6 cells 4400mAh
  It is a common battery that is built in series of laptops different, and it should be possible to extend the battery up to 3,5-4 hours work.

  But be aware that the battery working time depends on notebook use.

  Various factors may change the time of working of dough: brightness of the display, for example, use of CD/DVD and HARD disk drive, the CPU and cooling performance module all of these parts would drain the battery more slowly or faster depending on the settings.

  Working with the applications Office could slower battery as a game or watch movies on DVD.

  The formula is: t = Q / I
  t = time
  Q = electric charge (Ah)
  I have = amperage (A)

  So if you want to use Notepad for example 4 hours then all laptop computer s devices should not use more than 1000mA - 1100mA in an hour.