Record the Audio [1800-712]

Similar Questions

• I just installed Prime Minister 11 items and when I save a project, it is only to record the audio.

  I just installed Prime Minister 11 items and when I save a project, it is only to record the audio. I made sure that export audio and video boxes are checked in the advanced Panel, but still only audio. When I went to save it, I got a pop up that says something in mircosoft wanting to make changes to my computer and I clicked on is not to think that they were related (and), but only audio get exported. I have quick time installed, but still nothing. Help, please!

  Amandaw

  There may be an explanation for what you are experiencing.

  On what computer operating system is your first items 11 running? Windows 8 or 8.1? And you are exporting to a file MPEG2.mpg and playback on Windows Media Player? If this is the case, please download and install the VLC Player

  VideoLAN - official page for VLC media player, the video frame Open Source!

  and let us know if export plays back video and audio on this drive.

  If that's the problem known Microsoft MPEG2 Windows Media Player, and then explore publish them + share/computer/possibilities other than MPEG or use VLC instead of Windows Media Player player for playback of MPEG2.mpg exports.

  Please let us know the result.

  Thank you.

  RTA

• Failed to create the floppy disk to update the BIOS on the Satellite 1800-712

  I was given a Satellite 1800 712 with buggy BIOS (power went down while flashing) then now when the laptop is on a sign shows
  BIOS (Block2) is damaged! (Call the repairman)
  and so on...

  I downloaded the latest bios for the laptop, but when I try to follow the instructions given (unzip, insert a formatted 1.44 MB floppy, run the *.exe file and a 1.44 MB must be created) nothing happens. When I run the exe (chgbiosa.exe) if I am running windows xp nothing happens and if I'm running BACK said "initial mistake.

  In the Archives of the bios is a readme. It says that I need to copy files (BIOFC72T.COM and CHGBIOSA. (EXE) on a 1.44 MB diskette. Well, it is not helped either.

  Any ideas what should I do? Thanks in advance.

  Hello

  I found this thread in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19801&MessageID=72625

  The case described in the thread above is very similar to your question.
  According to this message that every newer BIOS has a protection mechanism which means that even in the case of an incomplete process of flashing, the area responsible for in the BIOS flash for the upgrade is never deleted.

  Generally you should contact the service point in your country for this problem, but perhaps the description in the other thread will help you.
  But you know, everything you do is at you own risk

• Satellite L300: How to record the sound from a video without sound

  OK, yes the title of the topic is not entirely clear. Here's my situation: I just bought a Toshiba Satellite L300 with Vista; Realtek HD Audio Manager is installed. I would like to record the sound of a video file using Goldwave (a sound editing program); but I don't want to have to listen to the sound, while it's recording.

  On Windows XP, you used to be able to record the sound of the stereo mix, but put the speakers on mute and it would record again. Now I find that I have to turn my speakers in order to record anything on my computer. (Yes, I fiddled with all mute buttons, insured that all reading and recording devices are working and front volumes. My current solution is to plug my headphones on my laptop and to reactivate the sound from the speakers to register... and not put the headphones in my ears)

  I have now spent in the last 4 hours looking for a solution, and I must say it's especially ridiculous. I used Vista before and I've heard rumors of how many people hate, but honestly, how is it that now the audio capabilities seem to be reduced?

  Does anyone have a solution of how to record sound with the speakers on mute?

  Hello

  I also recorded the audio of a video file using another software called 32. and Win XP
  I also used the stereo mix, but to be honest I have never muted the speakers while recording.
  To be honest I n don't know if it's possible, but if you want to test, you can try the Realtek HD audio Manager in the access panel and set the speakers to cut on the first tab called speaker.
  But as I said, I've never tested and that's why I m not very good if it will work.

• Is T410 - possible to record system audio (via Camtasia)?

  Hi all, can't seem to find the option to record the audio system (what you hear through speakers) when trying to capture video on my laptop, because I'm only given the opportunity to record via internal microphone. In addition to a loop/patch my headphone to mic jacks, is this possible to do?  I read that the sound card Connexant or Windows 7 can not allow this option.

  Thanks in advance.

  Thank you, previous poster.

  Fortunately, I found a solution!  7 Camtasia!  Enables the system to record audio without problem!

  TY, Camtasia!

  See you soon

• Problem reading recorded in audio

  Hello

  The following code is what I used to read the audio recorded.

  Private Sub sayHello()

  {

  int i = 0;

  data Byte [] = null;

  Audio AudioRecorderThread = new AudioRecorderThread ("gsm");

  audio. Start();

  Try

  {

  Thread.Sleep (5000);

  }

  catch (InterruptedException e)

  {

  e.printStackTrace ();

  }

  audio. Stop();

  System.out.println ("recording stopped");

  data = audio.getAudioBuffer ();

  ByteArrayInputStream IStream = new ByteArrayInputStream (buff, 0, data.length);

  Try

  {

  A player = Manager.createPlayer (istream, audio.getContentType ());

  Player.Realize ();

  Player.prefetch ();

  player.setLoopCount (1);

  player.addPlayerListener (this);

  VolumeControl vc = player.getControl ("VolumeControl") (VolumeControl);

  If (vc! = null) vc.setLevel (100);

  System.out.println ("player Staring");

  Player.Start ();

  Thread.Sleep (6000);

  System.out.println ("judgment of the reader");

  Player.Close ();

  IStream.Close ();

  }

  catch (System.Exception e)

  {

  System.out.println (e.getMessage ());

  }

  }

  The code for AudionRecorderThread is as follows,

  public void run()

  {

  Try

  {

  Create a player who live audio recordings.

  _player = Manager.createPlayer ("capture://audio?encoding=" + contentType);

  _player. Realize();

  Get the RecordControl, configure the flow of record,

  _rcontrol = (RecordControl) _player.getControl ("RecordControl");

  contentType = _rcontrol.getContentType ();

  Create a ByteArrayOutputStream to record the audio stream.

  _output = new ByteArrayOutputStream();

  _rcontrol.setRecordStream (_output);

  _rcontrol.startRecord ();

  _player. Start();

  }

  catch (System.exception final e)

  {

  UiApplication.getUiApplication () .invokeAndWait (new Runnable()

  {

  public void run()

  {

  Dialog.Inform (try ());

  }

  });

  }

  }

  public void stop()

  {

  Try

  {

  System.out.println ("slaughter recording");

  Stop recording, record data of the OutputStream,

  closing the OutputStream and player.

  _rcontrol.commit ();

  _data = _output.toByteArray ();

  _output. Close();

  _player. Close();

  }

  catch (System.Exception e)

  {

  synchronized (UiApplication.getEventLock ())

  {

  Dialog.Inform (try ());

  }

  }

  }

  The code above works file when encoding is gsm, but is unable to work with the regime pcm encoding.

  With PCM, it gives error "not a snd file.

  I tried putting the header before the captured data. But then it gives error Audiomanager:IOException and media.

  [0,0] VM:NCICv = 56 [0,0] VM:NMACv = 11

  [0,0] AR: remove the source 11

  [0,0] AR: setAudioMode 32

  [0,0] stopped recording

  [0,0] [-683785997] SMP: _ss = 1799

  [0,0] MN: init0 (0, 0, 5) = 0

  [0,0] MN: charge 0

  [0,0] VM:NCICv = 10

  [0,0] VM:NMACv = 25

  [0,0] AUDIOMANAGER: IOException

  [0,0] MP: h = 0, s = LG: + mErr

  [0,0] MP: h = 0, s = LG: + unlC

  [0,0] MN: finalize0 (0)

  [0,0] MP: h = 0, s = LG :-> UD

  [0,0] MP: h = 0, s = UD:-unlC

  [0,0] MP: h = 0, s = UD: mErr.

  [0,0] MP: h = 0, s = UD: LOAD ERR

  [0,0] MP: h = 0, s = UD: + UNLD

  [0,0] MP: h = 0, s = UD: UNLD.

  [0,0] Media: e:MdEr:9

  [0,0] of media initialization error.

  Help, please

  Thank you

  For PCM, it would be wise to add a wave header.

• How to record the screen and add audio with QuickTime?

  I can't wait to make my first video through QuickTime player, but I'm stuck on the following:

  (1) new screen recording - I'm able to capture the process of my video with this feature

  (2) audio new recovery - separately, I can record my audio

  But can't do the task above at the same time which means that I can save the process through and add my voice at once? Is this possible?

  Hello Vishal2014,

  I understand you are trying to create videos with recordings of screen as well as a voiceover. I can help you with that.

  Now, when you set up your registration form, you have the option to choose a microphone to talk and create video at the same time. This would reduce you adding the clip after the fact. Take a look at the first link below that will go on the way to do this.

  Save your screen
  https://help.Apple.com/QuickTimePlayerX/Mac/10.11/index.html?localePath=en.lproj #/ qtp97b08e666

  Now if you want to add audio to the video that you already created, consider using iMovie. You can import video, and during playback, you can save your audio files on top of the video. Take a look at the following article for more details on how to achieve this.

  iMovie (2013): add audio and music
  https://support.Apple.com/kb/PH14708

  Take care

• where are the audio files stored during recording as a project?

  Where are the audio files stored during recording as a project. The project opens fine on my computer, but when I move to another computer I have missing audio files.

  They are stored in their own folder in the project folder:

  

  So if you want to move it to another computer, you must copy the project folder, not only of the project folder.

• Satellite 1800-712 does not start with the new HARD drive

  Hello world.

  I am currently trying to install a new HARD drive in my notebook of 1800-712.
  I'm having a few trubbles as my Satellite won't start with my new HARD drive.

  I upgraded my BIOS to the latest version.
  The new HARD drive is a 40 GB Samsung.

  Any suggestions on what I need to do to make it all works?

  THX, Philippe

  Hello

  This device was shipped with 20 GB HARD drive.
  You again is 40 GB.
  I guess that the BIOS does not recognize the HARD drive because of the size.

• Can not remove the virus. Help, please! Satellite 1800-712

  Hello!

  I am running XP Home edition on a satellite 1800-712.

  The computer behaves very suspiciously, closing (disc according to the error messages or bad driver) and weird popups appear from nowhere (your computer is damaged - visit such or such website and we'll fix it for you) without me even a browser.

  I reinstalled XP with repeatedly Toshiba recovery disks, but it does not help. The virus or anything like that is always there. What should I do? Everything is saved. I just want to do a thorough cleaning of the hard drive, but the recovery discs don't seem to be able to.

  Thanks a bunch!

  Hello

  If the reinstallation of the system with the recovery CD does not help, the problem must be somewhere else, but not on the software on the hard drive. Maybe the hard drive itself has a problem, and the software cannot be read properly. Sorry, but at the moment I have no idea better.

  Good bye

• Unable to connect to the Internet with my Satellite 1800 712

  Hello

  had to reinstall Windows XP Home on my Satellite 1800-712, unfortunately do not have the recovery disc otherwise it would all be ok.

  Now, I can't get on internet, I downloaded new drivers for LAN, they installed ok, LAN is set to autodetect, USB wireless dongle drivers installed everything is ok.

  In my tray icon (bottom right) shows the networks but with red cross... I get a message saying that wireless networks are within range, click here to see the networks... when I click, Sun protection comes up saying no. networks in range... aarrrgggh.
  What can I do, please?

  Hello

  First you need to check if the wireless network adapter appears in Device Manager (expand network controllers).
  If the local network adapter is listed and there is no yellow exclamation point, this means that the wireless network adapter has been installed correctly.
  Now you have to activate the Wlan switch (somewhere on the side of the laptop) and the FN + F8 key combination.

  Now Wlan is enabled and you should be able to set it up.
  You can use a 3rd Wlan tool part for configuration or specific parameters of Win XP.

  Check it!

• Windows Dvd maker has left the audio recording

  Windows Dvd maker has left the audio, what have I done wrong? It will record video but not audio. I have other software installed on PC that works fine, so I don't is not material, it Mathilde do something with dvd windows creation parameters. What do you suggest me?

  Hello

  Windows DVD maker has all the features as other programs.  I use it for this reason. Try a newcreation of DVD Windows downloadand see if that makes a difference.

  I use Roxio 2012 Pro to my video, burn them to DVD.

• Satellite M105-S3084: is not possible to record streaming audio on the web

  I have a laptop M105-S3084 Satellite with XP MCE SP2. The sound card seems to be something called "Realtek High Definition Audio" on a bus to internal. The driver is 5.10.0.5200 dated dated 09/12/2005.

  This sound card and driver seems not to have what is necessary to allow me to record audio streaming on the web.

  I've been on audio NoticiasLA and determined that although with as SoundBlaster sound cards can save essentially anything that can be produced by PC speakers, this is not the case with the map I have in the Toshiba Satellite.

  For example, only flow for record in software like Audacity and others are 'Mic' and 'Line' all that is available with other cards is several other inputs (Audio mix, etc.) that the software allows to record the sound from the web browser.

  Other than to get another PC or sound card, is there a way to improve the capabilities of its Realtek High Definition Audio card? Others were able to achieve sound web using this sound card?

  Thank you.

  Hello

  I use two programs to record the sound from the internet sites;
  The first is wave-recorder and the second Messer.
  These two applications allow you to record from wave and convert and save files in MP3 format.
  You can choose the source of the record; the external microphone or wave.

  Check it out. In my case it works and I m very happy

• Satellite 1800-712 - the processor can be improved?

  Hello

  I have a 1800-712 and want to upgrade the processor.

  Is this possible?
  The vehicle currently has Intel Celeron 1.1 GHZ.
  If it can be upgraded, until then I go there then?

  I was not able to find in any threat on this model.

  Thank you
  Inge

  Hello Inge

  Upgrading the CPU is not possible. The processors used in laptops are connected to the motherboard using a process called TCP (tape carrier package). It is a method of permanent connection and is used in the interest of miniaturization and heat dissipation. The only thing you can do is memory expansion. On this path of unity will be vigorously. ;-)

  If you need information about the compatible memory module, please write again.

  Good bye

• On the audio recording problems

  Hi all

  I have a problem with regard to save audio files in Labview.

  In my program, I acquire the audio signals of the soundcard of the PC constantly and save them in a queue. After that certain prerequisites are activated, these audio signals in the queue is stored in a .wav file. This program works well, except a problem, which is the time lag in this .wav file. For example, I save a sound segment for about 30 seconds, but after the backup, this .wav file is just 21 long s. It contains all of the original recorded segment, but the time axis is compressed, which sounds like played fast. I searched all day and could not find any information about it.

  These sounds record and save functions are part of a comprehensive program, and I'm sorry that I can't give a single vi on it. I add the numbers below and I hope it helps. I am also willing to provide any additional information.

  PS: I have reviewed the incompatibility caused by approximation of the "t0" (published in http://forums.ni.com/t5/LabVIEW/Time-mismatch-with-Sound-Input-Read-VI/td-p/1385404 ) and compensate for that during the savings phase. (see figure 2)

  Thank you very much for the help!

  

  

  Hi, Vans,

  Thank you for your response.

  For your questions.

  1. I'm using Labview 2011 sp1 on Windows 7/Xp. I tested the program on desktop computers and laptops. I don't know about the types of sound card, but given that this problem occurs on several different computers, I think that this is not the problem of sound cards.

  2. for the sound card sampling frequency, in fact I checked that. I read signals of waveform of the 'read.vi of sound entry' and the term 'dt' is equal to 1 on the sampling frequency. So I think that the sampling rate of the sound card is correct.

  In fact I have just solved this problem by myself, but the solution is pretty weird. I think there are two reasons that caused this problem.

  1. when I receive tones of "read.vi of sound input", I first save them in a queue. Once the acquisition is completed, I save all the signals in the queue to a .wav file. But I'm going to do to overcome the overlapping sound and the gap caused by the "t0" reconciliation, a waveform signal re - organize before saving it, as below. According to my knowledge, I think that this 'dt' in the resulting waveform (indicated by the arrow) must be the same as before, but in fact it is not, and it becomes 1.

  

  2. Thus, to solve the first problem, I manually change the term "dt" once again as below. After the change, I'm sure that the "dt" is back to the correct value. But then is the strange thing is I saved the same signal waveform in two different ways, using "his write.vi file" and "file its writing simple.vi" respectively. The first method is the one I have used before and it caused the problem I posted here. The second works. In my program, I put as 16 kHz, 16 bits/sample, and 1-channel sampling rate. The file .wav from the first method has a strange flow 705 bps and the wave from the second method file has the right bitrate which is 256 bits/s.

  

  I tested the program of hundreds of times and each time he acted like I described above. I don't know if anyone has ever faced the same problem as me, but I hope that my solution can be useful for others. And I also hope to be useful to improve your LabView products.

  Thank you for your time.

  Best regards

  Sun87