Recovery does not end on Satellite L300

Similar Questions

• Recovery does not start on Satellite P200D

  I have a satellite P200D and I need him back due to a virus.

  Now, I ordered the recovery media kit and when I want to start it it does not start. The manual said, put the DVD, restart the computer and press F12 when the massage "In Touch With tomorrow TOSHIBA" poster.

  The message is not shown in the configuration and the recovery does not start.
  When I press F12 at startup is also the recovery does'nt start.

  What I am doing wrong?

  How can I get my laptop back?
  Any ideas?

  Hello

  You must boot from the disc.
  This means that you will need to insert the disc, have to turn on the device, choose ODD as boot device and this will start the recovery process.

  Try this!

• Drive HARD Win 7 recovery does not work on Satellite L750

  Hello

  I have the Toshiba Satellite L750 with preinstaled win 7.

  I instaled the upgrade to win 8 (from dvd).

  After that I improve the MS site to Win 8.1 System.

  The system does not work properly (DVD is not recognized) so I have to install previuos system.

  First of all, I'm improving my BIOS for the new one - 3.60.

  After that I try to win 7 reinstal my HDD recovery (which is located on the d partition). But it does not work: it has been impossible to start recovering in the menu of the bios (F8 key does not work, it was only possible to press F2 or F12).

  So I have to install my dvd 8.0 Win and now I have it and it works. But this is only a clear system without any addons like nero, ms office etc.

  My question is how do reinstal win 7 of my hard drive recovery that I always on the d partition?
  in the bios the F8 key does not work.

  After clean OS installation installation of HARD drive recovery not working anymore. If you want to have the original image of recovery preinstalled on your machine, you must use recovery DVDs.
  I assume that you did not create this disc, right?

  In the user s manuals document clearly described how it works with the image recovery and the creation of recovery disks.

• CD/DVD drive does not work on Satellite L300-01:00 - burning error at 20%

  Hello

  I have a Toshiba Satellite L300 01:00 there 2Gh processor 4 GB Ram HDD 250 and 3 days my DVD is not written anything.

  20%, I have error, so I reinstall OS (Vista Ultemate 64-bit) and the same problem.

  I don't know what to do, please give a solution >

  Thank you

  Hello

  I doubt that this could be a Vista or CD/DVV drive problem, I think that it s more a problem of compatibility of the disk.

  I recommend that you test some different discs from different manufacturers.
  Some have said here that the TDK discs are fine

  I tried these discs also and never had any problems burning / writing.

  Check it out

• Paved touchscreen and button right does not work on Satellite L300 with Vista

  My right button does not work.
  By clicking on the icon on the desktop, the drop down menu does not open and when you work in some programs (Indesign).
  In addition, sometimes the touchpad does not work.

  Reset is useful for a little bit.
  I have install the driver of Synatpics 11.2.4.0.
  Is there something else I can do besides sending it to be repaired.

  I just got this laptop 3 weeks ago and I hate Vista.

  Hello

  I put t think this could be a hardware problem.
  First of all, you should try to update the driver for the touchpad.

  First remove the touchpad driver in the system.
  Then, visit the page of European driver of Toshiba and download the latest touchpad driver and install it.

  PS: If you use an external mouse and that you have installed the mouse drivers/tools then this could also affect the functionality of the touchpad.

  Please also check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=38792

  Welcome them

• Recovery does not work in Satellite U405-S2854

  I caught a virus and used the recovery disks. The second disc has shown a message "unable to read the source file or disk PREINST5. SWN
  I tried again and the same message appears. If I press the SKIP option. After some time, a new error message:
  Error 10FC 06-0002

  Error recovery.

  Well, if it can work to even get it back to toshiba, we are lost!

  Could someone help me?

  Thank you very much

  Post edited by: marianasauer

  Well well, the last bad news: after this, the machine tried to restart and a message on a black screen: BOOTMGR is missing.
  No one deserves it! :-(

  Hello

  I put t know what is the problem here but in recovery category you can find several threads where people report on the same issue. It is interesting that this is reported by mobile phones to the United States only.

  I am from Europe and I don t know how works the recovery procedure but you can ask it on US forum under http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1

  I hope that you will find answer here. If you find it please let us know what the problem may be.

  In my opinion, it may be either defective or some recovery image HARD drive malfunction.
  Boyfriend sorry but this error is not known to me and I can't give a precise answer.

  Good luck!

• Webcam does not work on Satellite L300

  Hi all

  I went to use my webcam, and it wouldn't load up.
  I just get a grey square with preview in it. I tried to uninstall and then reinstall but still do the same thing any help would be grateful.

  Thank you

  To be honest, I can't imagine that this question comes from the first day.
  You wrote - I tried to uninstall then reinstall but the question is WHAT you ve reinstalled?
  Software webcam assistant pilot or a camera?

  I know that it's now a radical solution but if you can not attach to the use recovery image and return your laptop to factory settings. It will work for the first day.

• Installation of drive HARD recovery does not start on Satellite P300-150

  I have a 2008 Satellite P300-150 I want to restore factory settings.

  I followed the steps described in the manual of s to do it from the hard disk (F8 at startup), however, when I try, a screen will appear with a warning with the topic box"system recovery options"then below says "cannot start the installed program. Click ok to turn off the computer.

  I don't know m which is better to do it now if someone could suggest another way to do this, I would be very grateful.

  Thank you

  The situation is quite simple to explain. Recovery image installation can be done on two tracks:
  -using the HARD drive recovery or
  -using the create recovery DVDs.

  I put t know if you created this disk after advice from Toshiba, but if you use for the installation of operating system.

  By the way: Satellite P300 works perfectly with Win7 32 bit, so if there is a way to install do. It works much better than original Vista.

  If you have any other questions you are welcome. ;)

• Touchpad does not work on Satellite L300

  Hello

  A few days ago I noticed that my my L300 touchpad not working anymore. I work with the USB mouse preferably but need touchpad also. My system (Vista) tells that the touchpad is enabled and works. I've already disabled and re-enabled the touchpad, and I also updated the touchpad driver all without success.

  Can someone give an opinion?

  Thank you
  Bertram

  It s good choice to contact the ASP for a check

• Satellite L355 - dreaded blue screen - Bios does not end

  I have a new Satellite L355.
  Sometimes at startup I get the DBS.

  Otherwise said, the bios does not end and the screen is blank.
  Laptop repair center replaced the motherboard twice, but I still have the problem.
  I found that if I turn off the power and remove the battery, I can start very well after the replacement of the battery.

  Does anyone know why the battery clears the problem?
  Toshiba technical support often has a user that to clear a trouble report. They must know something.

  Thank you, jack

  > Occasionally when booting I get the DBS

  That would mean that this sometimes happens from time to time but not always
  Is this good?

  I think that it of difficult to say what's going wrong here because the question is not always happens... so it is difficult to replicate it
  Usually if the POST (power on self-test) cannot transmit properly then that would mean that a material error has been detected somewhere on the map

  Maybe you should check if the laptop using the latest version of the BIOS.
  If a new BIOS has been published, then you should try to update.

• Satellite L670 - the system HARD drive recovery does not start

  Hello together,

  I have a problem with my laptop. I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
  Now I want to restore the original Windows Home Premium. On the laptop is a second partition with a folder named "disk HARD recovery.

  When I hold the button '0' on start nothing happens. The beginning of doesn´t of system recovery.

  Can you help fix the problem.

  Thank you and best regards,
  Dinder

  Hello

  This does not work because you have installed Win 7 64 bit as you said here:
  > I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
  But have you tried also pressing F8-> fix my computer-> drive HARD recovery?
  Try this

  Otherwise, drive HARD recovery does not work because the boot manager has been changed or damaged as a result of the new install of Win 7 and this is why you cannot load HARD drive recovery.
  That is why it s always recommended to create a recovery disc before changing anything on the HARD drive.

  What to tell buddy you need recovery disks. I guess that you have a European model for laptop

  You can order the recovery discs here:
  https://backupmedia.Toshiba.EU/landing.aspx

• the new beta version that tries to be eliminated, everything is there and does not end when I aggree to install it. I'm on a Mac with OSX 10.9.3.

  the new beta version that tries to be eliminated, everything is there and does not end when I aggree to install it. I'm on a Mac with OSX 10.9.3.

  HI sselden,.
  Thank you for your question. Currently the version that you are on the old version. The current version is 29 and the beta version is 30.

  I recommend you to install a new beta version or the more up-to-date. http://www.Mozilla.org/en-us/Firefox/channel/

• WiFi does not work on Satellite C-55-A - 14 G with a Win 8 64 bit OS

  My wifi does not work on Satellite C55 - A - 14 G 8 64-bit Windows.
  How can I fix?

  There is wifi on other computers, but not on this laptop.

  Hello

  You always win 8?
  Microsoft has already published the Win 8.1 System.
  It of recommended to update 8 Win Win 8.1 because different bugs have been fixed and new features have been added.

  The 8.1 update win is free and you can download the Microsoft Store update files.
  Please perform updates, such as recommended by Toshiba and essential update, the driver and tools.

  I guess that after updating the WLan would work properly.

• Windows 7 upgrade failed - disk HARD recovery does not work

  I just received my Windows 7 upgrade disc, followed the procedure and he managed to upgrade Vista 64 bit for Windows 7 32 bit! Some drivers also seem to, were charged more than once.

  I tried to do a system restore from the recovery of HARD drive partition - and it won't!

  Can someone, please?

  Hello

  Drive HARD recovery does not work because Win 7 ran the Boot Manager and maybe the HDD partition has been affected.

  I guess you want to roll back to Vista preinstalled Toshiba.
  I think in your case, only the recovery disc will help you.

  Welcome them

• Does not begin with satellite L350D-11 needs - new mobo

  Does not start my Satellite L350D-11 has (Modell Nr.: PSLE8E-00R006GR). Looks like a malfunction to the motherboard.
  What type of motherboard is installed in this notebook?
  Lars

  Hello

  The motherboard is a part of Toshiba.
  I have goggled one motherboard + Satellite L350D and found the part number: V000148140
  It supports a Socket 478 and it is the ATX form factor.

  However, the new motherboard is not good cheap; between $ 250 and $ 300