Recovery of Active - office cannot retrieve the desktop computer

Similar Questions

• ORA-01124: cannot retrieve the data file 1 - file is in use or recovery

  I'm trying to recover the database in waiting, but it gives the error below.
  
  ORA-00283: cool cancelled due to errors
  ORA-01124: cannot retrieve the data file 1 - file is in use or recovery, the recovery is already said
  ORA-01110: data file 1: ' I:\ORACLE\QAS\SAPDATA1\SYSTEM_1\SYSTEM. DATA1'
  
  When I checked in the alert log recovery is not started. and later I hae given ' alter database recover Cancel "and the command to meet with the threshold.
  
  "media recovery has not started.
  
  It seems that the recovery was stuck between the two.
  Please advise me how to kill the recovery session that is stuck. because I don't want to bounce the database pending.
  
  Thanks in advance.

  Dataguard and MRP, you run a script before.

  In a standby scripted, a session to RETRIEVE the DATABASE would an UNTIL clause (SEQUENCE up to THAT most likely). At the end of the recovery at this point (SEQUENCE #), he left and stop at the database.

  In addition, the script is such that when a RECOVERY session is active, another session is not authorized to start. It can loop in pending state or go out and do it again the next scheduled interval.

  Apparently your startup script is not strong enough to prevent another session of RECOVERY to start even though the first is active (or it doesn't have a good up to THAT clause and stop, exit, closing stocks)

  What you have is a custom implementation of a database of pending. Without all the details of the script, the 'blocking' between sessions (to avoid a second RECOVER start when one is already running) etc... We can't really do much to help you.
  Your scripts must be standing with status information. It should be possible for you to discover the 'other' sqlplus session which emanates a DATABASE to RECOVER, but not yet out (p. ex... How about a simple "ps - ef |") grep sql' and ' ps - ef | combination of grep ora"?)

  Hemant K Collette

  Published by: Hemant K Collette on May 29, 2013 17:47

• Just bought 2 updates of Pro XI A. Installation and activation went well on the desktop, but said no laptop activation serial. is valid but cannot find a product calling on this cmptr, even if this window appears A Pro XI upstairs and Pro XI is insta

  Just bought 2 updates of Pro XI A. Installation and activation went well on the desktop, but said no laptop activation serial. is valid but cannot find a product calling on this cmptr, even if this window A Pro XI upstairs and Pro XI is installed. And is NOT in the drop-down list to select a Pro XI product.  What is going on?

  The product 'calling' is your old Acrobat - 9 or X. You need the serial number of this old version.

• 10gr 2-Sybase15-ORA-28545: cannot retrieve the text of the message from NETWORK/NCR

  Hi all
  
  I am trying to establish connectivity between Oracle 10 g 2 (Win XP Pro 2002) and Sybase ASE 15.0.2 (Sun Solaris 5.9) by using the transparent gateway for Sybase (TG4SYBS), but encountered the following error. I have looked for a solution quite well in all directions, but so far have been quite unlucky. This is my last resort. I don't really know what I'm doing wrong as I followed the steps of installation and configuration correctly. Please note:
  -Oracle transparent gateway software and database are installed in different homes; and,
  -J' created and tested the ODBC DSN connectivity with the Sybase server.
  
  The only thing that I have real concern about is the version of the Sybase server 64-bit OS; Windows Oracle server is 32-bit. Are going to count this could be the problem?
  
  ORA-28545: error diagnosed by Net8 when connecting to an agent
  Cannot retrieve the text of the message NETWORK/NCR 65535
  ORA-02063: preceding 2 lines of CSSTAT
  
  
  I am enclosing also any of the configuration system below:
  
  ------------------------------------------------------------------------------
  
  Database server
  ===============
  
  V Windows XP Professional 2002 SP2
  
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
  
  Sybase Adaptive Server ODBC Driver 15.00.00.152
  
  
  C:\ > echo %path%
  C:\oracle\product\10.2.0\tg_1\bin; E:\OracleHomes\agent10g\jlib; E:\OracleHomes\ag
  ent10g\bin; E:\OracleHomes\oms10g\bin; E:\OracleHomes\oms10g\jlib; C:\Program Files
  Company \Business Objects\BusinessObjects 6\bin\orb\asp\6.0\bin. C:\Program Fi
  les\Business Objects\BusinessObjects Enterprise 6\bin\orb\bin; C:\Program Files\B
  usiness Objects\BusinessObjects Enterprise 6\bin; C:\sybase\DataAccess\OLEDB\dll;
  C:\sybase\DataAccess\ODBC\dll; C:\sybase\Shared\Sybase Central 4.3; C:\sybase\OCS-
  15_0\lib3p; C:\sybase\OCS-15_0\dll; C:\sybase\OCS-15_0\bin; C:\sybase\JS-12_5\bin; C
  : \sybase\ADO.NET\dll; C:\sybase\ODBC; C:\Program WinRAR; C:\Windows\System32;
  C:\WINDOWS; C:\WINDOWS\System32\Wbem; C:\sybase\DBISQL\bin
  
  ------------------------------------------------------------------------------
  
  Sybase server
  =============
  
  Er1min01 of SunOS 5.9 Generic_122300-11 sun4u sparc SUNW, Sun-Fire-V440
  
  Adaptive Server Enterprise/15.0.2/EBF 14328, P, Sun_svr4, OS 5.8/ase1502/2486/64-b
  IT/FBO/Thursday 24 May 12:18:26 2007
  
  ------------------------------------------------------------------------------
  
  Sybase SQL.ini
  ==============
  
  [MINSAT]
  Master = TCP, 192.168.1.150, 5002
  Query = TCP, 192.168.1.150, 5002
  
  ------------------------------------------------------------------------------
  
  C:\oracle\product\10.2.0\tg_1 > tg4sybs
  
  Oracle Corporation - WEDNESDAY SEP 23 2009 02:43:29.406
  
  Heterogeneous Agent Release 10.2.0.1.0 - Production built with
  Driver for SYBASE
  
  ------------------------------------------------------------------------------
  
  inittg4sybs.ora
  ===============
  
  # This is an example of initialization file of the agent that contains the HS settings
  # needed for the transparent gateway for Sybase
  
  #
  # HS init parameters
  #
  HS_FDS_CONNECT_INFO = MINSAT.csstat
  HS_FDS_TRACE_LEVEL = OFF
  HS_FDS_RECOVERY_ACCOUNT = RECOVERY
  HS_FDS_RECOVERY_PWD = RECOVERY
  #HS_FDS_TRANSACTION_MODEL = READ_ONLY
  
  #
  # Required for Sybase environment variables
  #
  SYBASE the value = "C:\\sybase".
  
  ------------------------------------------------------------------------------
  
  Listener.ora
  ============
  
  listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (SID_NAME = csstat)
  (ORACLE_HOME = C:\oracle\product\10.2.0\tg_1)
  (PROGRAM = tg4sybs)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = FH)(PORT = 1521))
  )
  )
  
  SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER = OFF
  
  ------------------------------------------------------------------------------
  
  tnsnames.ora
  ============
  
  tnsnames.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  TEMP =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = FH)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = TEMP)
  )
  )
  
  csstat =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.123.49)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = csstat)
  )
  (HS = OK)
  )
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
  )
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )
  
  ------------------------------------------------------------------------------
  
  C:\oracle\product\10.2.0\db_1\BIN > lsnrctl status CSSTAT
  
  LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 23-SEP-2009 02:47
  : 10
  
  Copyright (c) 1991, 2005, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=192.168.123.49) (PORT = 152
  ((1)) (CONNECT_DATA = (Server = Dedicated) (service_name = csstat))(HS=OK))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - production
  ction
  Start date 23 - SEP - 2009 01:48:54
  Uptime 0 days 0 h 58 min 16 s
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Listener parameter File C:\oracle\product\10.2.0\db_1\network\admin\listener.o
  RA
  Listener log file C:\oracle\product\10.2.0\db_1\network\log\listener.log
  
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=FH) (PORT = 1521)))
  Summary of services...
  Service 'OEMREP_XPT' has 1 instance (s).
  'Oemrep' instance, State LOAN, has 1 operation for this service...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  Service 'TEMPXDB' has 1 instance (s).
  Instance 'temp', State LOAN, has 1 operation for this service...
  Service 'TEMP_XPT' has 1 instance (s).
  Instance 'temp', State LOAN, has 1 operation for this service...
  Service 'csstat' has 1 instance (s).
  Instance of 'csstat', status UNKNOWN, has 1 operation for this service...
  Service 'oemrep' has 1 instance (s).
  'Oemrep' instance, State LOAN, has 1 operation for this service...
  'Temp' service has 1 instance (s).
  Instance 'temp', State LOAN, has 1 operation for this service...
  The command completed successfully
  
  ------------------------------------------------------------------------------
  
  C:\oracle\product\10.2.0\db_1\BIN > tnsping CSSTAT
  
  AMT Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production 23-SEP-2
  009 02:48:12
  
  Copyright (c) 1997, 2005, Oracle. All rights reserved.
  
  Use settings files:
  C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
  
  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.
  123.49)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = cssta
  (t)) (t)) (HS = OK))
  OK (20 ms)
  
  ------------------------------------------------------------------------------
  
  SQL > create database link csstat connect to the 'fw' identified by ' * ' using 'csstat ';
  
  Database link created.
  
  ------------------------------------------------------------------------------
  
  SQL > select * from sys.hs_fds_class;
  
  FDS_CLASS_NAME
  FDS_CLASS_COMMENTS
  FDS_CLASS_ID
  
  BITE
  Integrated Test environment
  1
  
  ------------------------------------------------------------------------------
  
  SQL > show parameter global_names;
  
  VALUE OF TYPE NAME
  global_names boolean FALSE
  
  ------------------------------------------------------------------------------
  
  SQL > select * from SIMSwap@csstat;
  Select * from SIMSwap@csstat
  *
  ERROR on line 1:
  ORA-28545: error diagnosed by Net8 when connecting to an agent
  Cannot retrieve the text of the message NETWORK/NCR 65535
  ORA-02063: preceding 2 lines of CSSTAT
  
  ------------------------------------------------------------------------------

  you use the Oracle Listener database in C:\oracle\product\10.2.0\db_1\ to spawn TG4SYBS installed in a different House: C:\oracle\product\10.2.0\tg_1. This works when you specify the full path in the listener.ora to tg4sybs executable file. The section of SID might look like:
  (SID_DESC =
  (SID_NAME = csstat)
  (ORACLE_HOME = C:\oracle\product\10.2.0\tg_1)
  (PROGRAM = C:\oracle\product\10.2.0\tg_1\tg4sybs)
  )

  Then STOP and START the listener and try again.

• Unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon.

  Original title: I tried to apply the photo viewer to open a file and the photo viewer icon replaced each icon on my desktop. Now I can't open anything on my desktop. What is going on?

  The name is below the icon, but the correct icon has been replaced by windows Photo Viewer icon. When I click to open it, it says: windows Photo Viewer cannot open this photo because Photo Viewer does not support this file format, or you do not have the latest updates... I don't know what I did!

  Hi,

   

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you are unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon. Please let me know if you do not experience this problem.

  I understand the inconvenience caused to you. I'll help you solve the problem!

   

  Before troubleshooting, I have little information on the issue.

  1. did you of recent changes to the computer before this problem?

  Try the methods suggested in the article below and check after each method:

  Method 1: Icons change incorrectly in Windows: http://support.microsoft.com/kb/2396571

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the in the Microsoft Knowledge Base: 322756. How to back up and restore the registry in Windows: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

   

  Method 2: Run scan files system (CFS) auditor, to repair missing or corrupted system files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• Problems with the desktop computer, phone and Tablet Design

  Hi all

  As soon as I download my phone design that is all I get, phone design in each desktop browser, iphone and Tablet I, how do I MUSE use view PHIONE for phones, tablets for the Tables and VIEW of PHONE NOT ONLY in each device, a computer or a browser. -They only way I can see my design office is by removing the phone design.

  Any help appreciated.

  TX

  Hello

  I just check the site in my phone and the desktop computer. His office showing the desktop version and the version from phone to phone.

  Please clear the cache of your browser on the desktop browser and return to the site. If it's a windows machine, the shortest way is to press Ctrl + F5.

  Concerning

  Vivek

• vdmadmin to assign the desktop computer?

  I'm giving entilements to a user in AD to access your desktop using the vdmadmin.exe command line interface.  I use VMware View Administrator 3.1.0 build-167577.

  Here is an example of what I am running and see:

  C:\Program View\Server\bin VMware & gt; vdmadmin.exe-L d DesktopVM u example.com\phife757 m Pool1

  Sucessfully assigned the machine specified user

  When I look at the web administration interface after the above command I don't see this user, such as the right to use the desktop computer.   Sign in using the customer discovers also fails.

  I received the command from this article: http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 100752

  So I guess my questions are, I use this command properly?  If this is not the case, how could do this using the command line?

  phife757 wrote:

  C:\Program VMware View\Server\bin > vdmadmin.exe-L d DesktopVM u example.com\phife757 m Pool1

  Sucessfully assigned the machine specified user

  So I guess my questions are, I use this command properly?  If this is not the case, how could do this using the command line?

  There is no option for vdmadmin command line allows users to a desktop computer, only for (UN) assign a VM specific to them within a pool of persistent. You must use the administrator user interface to set up rights to the office. recommendation of davesherman to manage rights for large pools of office using ad groups is a good way to go, you can then change the rights by changes to scripts in the group.

• How to stop firefox to shutoff valve of the desktop computer

  have not been able to stop the desktop computer, while in firefox there is no button on the keyboard

  Hi, I'm still not quite sure if I understand your question. However, the stop button is something that will always be handled by your operating system and is usually to be found within the user interface of your browser.

  http://Windows.Microsoft.com/en-us/Windows-8/how-shut-down-turn-off-PC

• Remote assistance - unable to connect to the desktop computer using the remote connection

  Hello

  I'm currently running vista Professional 64 bits for portable and desktop computers.

  Problem:
  -I am not able to connect to the desktop computer by using the remote connection.

  Tried:
  -Setup the remote asstance for the Username (account login) designated
  -looked up the IP address
  -entering the IP then username and password
  Failed connection *.

  Little Question, too:
  -I run behind a router with 3 machines connected to the router, it would change my location from IP address? I think that's where I'm stuck at.

  The following article should you guide through the process and solve your problems:http://www.vistax64.com/tutorials/116361-remote-assistance.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I'm considering buying a computer with Windows 7. Is there a driver for my Canon Multipass F50 printer? I have Office Professional for XP - can I load office software on the new computer with Windows 7?

  I'm considering buying a computer with Windows 7.  Is there a driver for my Canon Multipass F50 printer?  I have Office Professional for XP - can I load office software on the new computer with Windows 7?

  Page drivers Canon MultiPASS F50 & the downloads shows nothing for Windows 7 (or even for Vista), so I doubt that it works.

  Microsoft Office XP is not compatible with Windows 7.  Office 2003 and Office 2007 are.

  I wish I had better news for you.  :-(

• Windows could not start the Microsoft Office Service on the local computer

  The whole error is

  "Windows could not start the Microsoft Office Service on the local computer error 1053; Service has failed to demand launch or timely control.
  It seems that this instance of office 2013 has stopped working.
  Win7 64 bit machine with all sorts service packs, etc. was in a field, we moved to a new domain, and it worked well for one day, now it has this problem. Any advice or suggestions would be helpful.

  Hello

  Since you are faced with the question after changing to the new domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:

  Forums TechNet Windows 7

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Cannot retrieve the Portege R100 by using the recovery CD

  I replaced the HARD drive on my R100 not having the original. Thank you to help on the forum, I managed to solve a CDROM with a PCMCIA connector.

  I got through the recovery screen and choose option 1 - retrieve the entire disk. He got a disc of part way through 1 when he did not play a file. I then ran it again, but the selected option 2 - Toshiba Recovery utility and it started and then failed with the error - "cannot open TOSH_REC. COMMITTED AN ERROR."

  Where else?

  Thank you

  Ian

  Hello

  Have you replaced it with all new HARD drive? It's very strange question and if the HARD drive is nine something like that shouldn't happen. You have the FDD to check the HDD with FDISC? Please use the floppy drive and boot the disk to check the new HARD drive.

  Somehow, I feel that there is something wrong with this new HARD drive.

• Cannot delete the desktop shortcuts

  I recently added Dell Dock. Shortcuts added were on the quay and on the desktop. When I tried to delete the desktop shortcuts, I received the following message:

  "Cannot find this article.
  It is no longer in the Office of C:\Users\Public\Public. Check the location of the item and try again. »

  I then deleted Dell Dock and now am stuck with 5 shortcuts on my desktop that are not going anywhere, not open to anything, and I can't remove.

  Someone please help!

  Hi StarsSkyClouds,

  Thanks for the response on the Microsoft answers Community Forums.

  Try to remove these in safe mode shortcut icons. Follow the steps on how to start in safe mode.

  Advanced startup options

  http://windowshelp.Microsoft.com/Windows/en-us/help/f9c50a72-04EC-4088-9fd4-a4f979eef5a71033.mspx

  Note: Try to remove the icons from your account in case of connection failure to the account administrator in safe mode go the c:\users\username\desktop location and try to remove it from there.

  Another step you can try is to create a new user account in Control Panel > user accounts. Open a session in the new account go to c:\users\username\desktop location and try to delete from there.

  If this fails, you can try to remove these icons in the windows recovery environment starting from the DVD. Follow the steps below for the link below to start the recovery environment.

  Repairs to the system of Windows recovery environment

  http://windowshelp.Microsoft.com/Windows/en-us/help/95b4c03a-ac42-49a4-a90d-8f3736a995271033.mspx

  After you boot from the DVD

  Step 1: Start in the screen Options of system recovery.

  Step 2: Click on the command line option.

  Step 3: Type notepad and press ENTER to open a Notepad. Press Ctrl + S, and it will open a save dialog box.

  Step 4: Click on computer, and it will open all your drives.

  Step 5: Go to the c:\users\username\desktop site and remove icons.

  I hope this helps.

  Let us know if you need more assistance.

  Kind regards.

  Nicolas Mathieu

  Visit ourhttp://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• cannot show the desktop on the envy Touchsmart screen

  I can't show the desktop on the screen of my laptop Envy 17 quad touchsmart with Windows 8 t, although other images, such as screen saver can be seen.

  Hello @CJ867 ,

  Welcome to the HP Forums!

  I see that you are having problems with the screen does not display is not on your ENVY 17 laptop. I will do my best to help you with this.

  Can you tell me if the office applications appears or if only the splash screen and apps work? Or is it only the background is black, but you can see the icons and the system tray?

  If it is a new issue, there were recently some updates Windows that were originally black screens after login and it could be related. I suggest you perform a restore system before the issue started. You can see how to do this here: (Windows 8) system restore.

  The system restore is usually confused with a system refresh or reset. Recovery allows to uninstall updates, drivers or software that was installed after the restore point, but will not delete your personal files.

  Let's start with that. Let me know if it helps!

• Satellite Pro S300 - cannot extend the desktop to an external monitor

  Hello
  I have a Satellite Pro S300 and it won't extend the desktop to an external monitor / projector, but it will clone the desktop?

  so far I have tried:
  2 instructors and 1 projector all do the same thing, will clone but not extend.
  Reinstall the latest drivers to display on the Toshiba site.
  Reinstall the latest drivers of change on the Toshiba site.

  But nothing worked, I even checked my S300 colleagues to make sure that I use the same parameters and their (of 2 other s300) extend and clone office.

  Has anyone seen this before and how solve you the problem?

  Paul

  Did you first remove the old driver before you install the new driver? If this is not the case, try to reinstall the driver again. Therefore, to remove the old driver, restart the computer, use CCleaner to clean the registry and install the new version you can find on the Toshiba site.

  More I would try updating the BIOS. You can find it on the Toshiba site too.

  I hope it works for you.