Recovery of password on a 3750 Switch
I tried a recovery of password on Cisco 3750 switch. I followed all the steps and got to the point where I copied the config.text to the running-config. After that, I got the switch privilege exec mode. When I tried to configure the switch with a new enable password, I got the following result
Switch1 # conf t
Authorization failed %
Even the show commands do not seem to work
Switch1 # sh run
Authorization failed %
Switch1 # sh ip int brief
Authorization failed %
Can anyone suggest how to get on this question to reset the password of the switch.
Thanks in advance,
Kind regards
REDA
Do you need to keep the configuration? If does not need, do not copy the file config.text to the running-config. Password recovery is over.
If you need does the following.
Do not copy the file config.text to the running-config. Before copying to the computer file config.text. Open and edit with Notepad (remove the aaa and change the enable password). Then, copy the file config.text (which you changed) for the running-config.
Kind regards
Tags: Cisco Security
Similar Questions
-
Recovery of password on PowerConnect 3524
I hate to admit it, but I'm puzzled by the documentation and the CLI on a PC3524 whose unknown password I need to reset. I downloaded the User Guide and the CLI reference and tried the command-line help feature, but it's still not clear to me what commands I'm supposed to enter.
I a PuTTY connection upwards I restart the switch and press [3] to password recovery, after which the switch continues a SwitchName boot > prompt.
Then what? Login? With what parameters? Then what? Looks like it should be 3 or 4 orders for access me via the web console, where I can do the rest.
Anyone can facilitate this nube Dell PowerConnect CLI, providing commands I should use?
Thank you!
Ok. Read the manual and came up with the answer. And it is here, in case it helps other nube:
After booting into recovery of password mode, these commands to the console will be resets the local 'admin' password:
Enable
Configure
username admin password level 15 MyP@ssw0rd
output
Active username admin set
Disable
-
Recovery of password on the C/SX Series (No. PWREC)
Hi all
Is it possible to reset the password of admin on C/SX series TC6.x and TC7.x?
I know that 'PWREC' user can reset admin password.
But it puts not only admin password, but unfortunately also all the configuration (= factory-reset).
In addition, SX20 is not any console port, so if you forget the SX20 admin password, which means, all we can do is factory reset.
(no root for TC7.x account now)
Best regards
Kotaro
- The recovery of password PWREC user has been deleted because of security considerations. There is no way to recover the password, if it is lost the system must be factory reset. If physical factory reset is not possible, it can be done via the web interface. It is also possible to connect through the series as a user of reset.
- Connect the cable series on the system at 38400, 8, N-1
- Restart the system
- Sign in with the user "factoryreset. This user is available just a short period of time after the reboot (it is still available in TC6). When connect with this user, it is possible to make a systemunit of xcommand FactoryReset confirm: Yes.
- Do a reset: 'Xcom boot.
- The system is factory reset.
If the root account is activated in TC 6.X, we can change the password using the command "userdb setpassword admin
. We cannot use this procedure 7.x from Thank you
Deva G
-
Recovery of password on AIM - IPS
Hi all
Could someone be so kind and help me with the recovery of password on our AIM - IPS. I followed the steps in http://www.cisco.com/en/US/docs/security/ips/6.0/installation/guide/hwTS.html#wp1117969 to no avail. I destroyed all my hair. Thank you very much someone who solve my problem.
Jaroslav,
Of course it is ;-)
Instead of sessioning at the device, you are your own router sessioning
bsns-2821-4#service-module idS-Sensor 0/0 session
Trying 192.168.15.15, 2194 ... OpenAIM-IPS-TEST login:
And when you do your session:
Refoma# service-module idS-Sensor 0/1 session
Trying 10.15.10.1, 2130 ... OpenUser Access Verification
Username:
By comparison, when you telnet/ssh to the router:
bsns-2821-4#telnet 44.11.252.4
Trying 44.11.252.4 ... OpenUser Access Verification
Password:
I added a baseline configuration that should take care of the hand of a problem, but I guess the big question is, what has been done to trigger this ;-)
line 130
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
speed 115200Marcin
-
Recovery of password on TCS 5.2
Hello
Is there a procedure for recovery of password for the new HW TCS run version 5.2?
He arrived with an unknown password and restoring default settings do not change the password.
Thank you
Hello
Have you tried cisco123
Justin
-
After recovery, admin password information with 'points' and impossible to remove or change
Hello.
I ran yesterday, updates of Windows 7 but only those necessary. I do not have one of those as an option. After the updates completed, I turned on the computer and he was stuck in a loop cycle - from windows, then the admin password, connect you box came. The box was fiiled in (with "dots" but too many to represent my password) and the screen just quickly flashed back & forth between the login screen and 'incorrect password '. I tried to change username, and it flashed back into the admin log.
I did a system restore to the factory settings (after saving all data) using the recovery discs. After recovery, the screen "Set a password for the account" comes with the box below "Type a password" completely filled with dots. I can't delete them with the BACKSPACE or DELETE key. If I put highlight and then try to erase it with BACKSPACE or DELETE, the cursor just moves on the right side of the password box, but it is not always remove the defective "dots" password so that I can change.
I tried to restart with the power and then switch on again. After selecting the country & language again, same password screen developed.
It's stuck! Any help would be greatly appreciated! I have computer I have is the HP Touchsmart 310 1155 - Y.
Thank you!
It's curious with a recovery. First, try to reset the password using NTPassword. Do the boot CD that him following the signs. If this does not resolve the problem of signon, think to install the operating system from a typical drive of Windows 7 to the same version, using the key of the COA sticker.
-
Recovery of password Cisco SGE2000P battery
Hello
Im trying to recover the password of my switches stacked (doing the procedure on the master switch), im following a guide I read in this forum ("SRW248G4 V1.1 can't reset the password") to the terminal console chose "password Recovery" he invites the 'current password will be ignored"and then I hit"Escape"the departure of configuration of loading switch at this stage, I try to open a telnet or http session, but the connection fails.
Here is the password/username combo im using (admin/empty; admin/admin).
Is it possible to restore the admin password or should I just reset hardware switches?
Thank you
Hi Jose, when you use the password recovery, he temporarily 'white' the password. When prompted for credentials, you should be able to hit your "enter" key without typing anything.
-Tom
Please mark replied messages useful -
The Acer recovery management will not run on switch 10
By the switch of my Acer 10 owner's manual, there are steps proposed to "create a backup recovery" and a "driver and application backup. But the Acer Recovery Management will run. When I click on Acer recovery management application, I get the screen of the security clearance. I click on "OK" to continue. Nothing happens. I tried several times. I also tried to run as an administrator without success. I have a 32 GB flash drive ordered. Is the flash drive must be inserted into the switch 10 for the application to run? If not, what am I doing wrong
You must insert the USB pen to perform recovery management, either by the way, if the Acer recovery management does not work, you can use windows built-in recovery.
http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive
-
system recovery administrator password
y at - it a password for the default administrator for the system recovery? every time I try to put my admin password it says incorrect and I put in the admin, even. Then, I put 123456 same how am I supposed to access them if I don't know the password?
There is no default password, that sound that you origonally set, try to leave empty/empty if it does not "ggogle to know how to reset.
-
Error recovery E280 mode, then asked to switch to USB 2.0 MSD mode
I've always had errors with my player, but now when I turn it on, I get error "main image may not load, switch to recovery mode." I turned off the player, move the hold switch, press and hold the rec button and connect to my computer. Now when the player turns on, I get "Welcome to Recovery Mode", USB cable plugged in, mode enter USB2.0 MSD.
Anyone know what it is and how I do it?
I love cryptic error messages. "In USB 2.0 Mass Storage Device mode" and a mention of a link, are good things.
Your Sansa tells you that it is in Recovery Mode, and it communicates as a Mass Storage Class device (MSC against MSD, quibble about the exact definition is everything).
'Main image' is is the firmware for the e200.
Download and unzip the firmware mi4 and here, the BL_SD rom files run with version 18. Inside of this archive zip, you will find two files. Unzip them and place them on your desktop.
Then, with the v1 of connected Sansa in Recovery Mode, you'll need to open a Windows Explorer window. Double-click workstation. See the new icon, 16 MB FORMAT? Double-click this to open the partition reserved your Sansa, home of the firmware files.
No matter what you do, DO NOT use the Windows Format command on this reserved partition!
Drag and drop the two files of the firmware in the score (open window). Right-click after the transfer, and select eject.
Turn the HOLD switch on left and unplug your e200.
Automatically reinstalls the firmware.
Bob
-
Cisco switch Catalyst 3750 does support QoS CBWFQ?
I would understand if the catalyst IOS supports control of bandwidth to a class and offer a minimum bandwidth in a situation of congestion. I have a few applications that need to increase its flow when other classes use their bandwidth. On my 3750 I don't see bandwidth control.
Thank you very much.
Hi you should not have to configure the qos of the mls, just use the political function of the to apply, but from what I remember there are restrictions on 3750 s I don't think you can apply the outbound policy only entrants, but he was able to change most recent IOS, I have not tested recently
It is a good doc on 3750 s qos
http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst3750/software/...
-
IPsec tunnel on cisco 3750 Switch
Guys... I just wanted to know, is - it possible to configure/close the tunnel vpn ipsec on cisco switch 3750.
Thanks in advance.
NO u cant, you can on CAT 6500 with VPN module!
-
Light green RPS on 3750 switch
Hello world
I have stand-alone switch 3750.
RPS led is green and light system is off.
3750TS env #sh all the
The FAN is OK
TEMPERATURE is OK
SW series PID # status Pwr Sys PoE Pwr Watts
-- ------------------ ---------- --------------- ------- ------- -----
2 integrated good
Status of SW RPS name RPS no_serie RPS Port #.
-- ------------- ---------------- ----------- ---------
2 does not<>
3750TS #.
I have another switch with the same model and ios that its light RPS is off and the system led is green
Thank you
Mahesh
Hello Manu,
So, given that the switch works well, so there could be something wrong with the light, front or the mode button which are all cosmetics and should not impact on the switch.
HTH
Reza
-
Recovery of password on the vpn concentrator 3000 4.0 running above
Hi all
I looked in the collection of information about a vpn concentrator 3000 for one our clients who have recently begun to support. We have no documentation on the user name or password for the hub:
The link on cisco http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_password_recovery09186a008009434f.shtml
tells you how to reset the administrative password. But can someone confirm after doing so, the hub will retain the old configuration, I am very reluctant to do so because we have no documentation anywhere configuration and saw that you can lose it in some of the old pix/switches/routers.Thank you very much.
For what it's worth, I followed this procedure to properly reset the administrator password on a VPN 3000 Concentrator without loss of the active configuration.
-
Good recovery of password e-mail
Hello
I am looking for a way to recover the password for good Messaging on my Palm 750. My girlfriend don't remember what it is. Hard reset now ask for recovery password... Please don't tell me we are GROUND!
Thanks in advance for any info...
Normally, either your girlfriends there this or good messaging where she bought the program from.
Maybe you are looking for
-
I have toshiba laptop and lately when I boot down his still worked. After research on the net about tss.exe.Some say little edwige or is it Toshiba and I need to keep it. Now, I can not find via my browser only via the msn homepage. Please, help me t
-
Original title: java question. I'm trying to access the Citrix server to access my work server. When I click on an application, I get an error message: your browser must have Java enabled to use the Client for Java. I checked and the right version
-
Signature tool crashes when signing
Try to sign my application after the installation of BlackBerry Java Development Environment. Installed RRT, RBB, CPR code signing keys. The Signature tool is successful on CPR, even if they are optional, but it crashes on RBB (required). I get email
-
Why should I buy again to install when I have already paid for this?
Paid for Photoshop CC yesterday by Visa card. And trying to install it from. He always asks me to buy it. The amount has been debited from my account also. Please check.
-
I ve changed the schedule of my computer and my trial period has expired
Yesterday, I received the trial version of Adobe Creative cloud. My computer calendar was wrong. When I changed the calendar and correct him, my trial version expired directly in 1 day. I need help