Recovery process does not USB

Similar Questions

• Portege M200 recovery process does not work

  I want to re format my old M200 of 4 years using the original recovery disks (4).
  The recovery.txt file that is stored on the first disc advise me of a process for this, but also States that "this utility does not if the drive has been formatted or converted to NTFS.

  My C drive is NTFS, and the recovery process does not work.
  I'm unable to find any other documents or files on the drives to advise me what to do help.

  I would be greatfull for anyone who has experience with this issue who can advise me on the correct process to run my recovery on a drive formatted as disks

  NTFS.

  May I ask what laptop do you have: is it a M200 Satellite or Portege M200?

  How have you tried to recover the laptop?
  Have you tried to boot from the CD?

• Recovery facility does not engage on Satellite L850D

  Hello

  as my PC still locked after 10 minutes (surfing on the net, use of Ms office,...) Finally, I decided to reinstall Windows and made a record of recovery facility. Indeed, remove all software (office, Chrome,...) and reinstall it did not solve anything
  I reinstalled and noted installation was indeed very slow (hours) until he stopped at stage 47 of 47. Wait again for if long step 47 in the end, he didn't move at all.

  I rebooted, and then asked for an administrator password to WIndows7. How can I know, I didn't create any user.

  Then I restarted in safe mode, where I could create a user with administrator rights (if did not create a password for it)
  Then I could log on, but he again immediately on screen Toshiba Leading Innovation above windows again stuck again at stage 47/47. No movement at all new.

  So I decided to lower-level security the lowest level regarding ' when the software is installed you are not asked to leave.
  Indeed, the stage 47, then ends.
  But then, I get another step of the installation with the comment "of worden systeemprestaties nu geclassificeerd. It's the Dutch version, which means "Systemprestations are now classified."
  I am progressing a little, but after about 10 seconds, it stops and the progress bar does not continue. Automatically restarts windows and sometimes not help waiting hours. He leaves with execution step 47 of 47, going back to "Systemprestations are now classified", but always stucks there yet.

  I don't really see a solution, please help me.

  As Windows 7 is pre-installed, I have no CD/DVD official WIndows7 and cannot rely on the Toshiba recovery tools.
  I would expect Toshiba Recovery does all the work...

  Even if you are not a professional IT guy, the recovery process is not really complicated...

  Usually, you must boot from the recovery disk and have to follow the instructions on the screen... that's all...

  I also got my two laptops Toshiba repeatedly and never questions had mentioned in your message... in similar cases, I recommend always repeat the recovery procedure or check the hardware parts; for example the HARD drive...

• Recovery CD does not completely load.

  I just replaced the hard drive and the recovery CD does not completely load. After having ejected the second CD, the file loading process stops at 12%. There is no error message and I welcomed as much as 5 hours for the load file to complete, but it remains at 12% after the first 30 minutes. HP Pavilion dv7-4165dx, Windows 7

  Well - here I answer to my own problem in case someone else has the same problem.  The second disk files recovery finally finished loading after 20 hours of waiting!  I spoke to two different technicians to support HP on the phone and neither one of them told me that it could take a long time to load the files!  One of them had me arrested and again after about 40 minutes of waiting.  I found it totally by accident after having frustrated and leaving it just stay there all night. Amazing!  The rest of the restore procedure went well after that - I think.  I'm always load all other software, files and updates, 2 days later.  The hard drive on this dog only lasted a year.

• BIOS update failed: the process does not have this system. The process of the utility is not complete.

  I have a Thinkpad T450s and I'm trying to update the BIOS version 1.19 to 1.20. I've created a live usb with the 'el tortio' - image extracted using linux "dd". Once I boot on the USB under Legacy-BIOS and select upgrade, it proceeds witht the error message "the process does not have this system. The process has been cancelled. "I have disabled the protection against theft, AMT (I think this is the option) and I'm sure that I use the correct .iso file from the downloads section. I don't have a Windows operating system installed, but I'm able to start in various linux distributions using Legacy and UEFI methods.

  Here is my BIOS information.

  "Manage 0 x 0031, DMI type 0, 24 bytes.
  BIOS information
  Seller: LENOVO
  Version: JBET54WW (1.19)
  Release date: 06/11/2015
  Address: 0xE0000

  Runtime size: 128 kB
  ROM size: 16384 KB
  Features:
  PCI is supported
  PNP is supported
  BIOS is extensible
  BIOS shadowing is allowed
  Boot from CD is supported
  Selectable boot is supported
  ACPI is supported
  Legacy USB is supported
  BIOS boot specification is supported
  Targeted content distribution is supported
  UEFI is supported
  BIOS version: 1.19
  Firmware revision: 1.2 "

  What could you suggest to get the update disc to recognize my system?

  I think I've fixed the problem, I formatted FAT16 USB drive and not in FAT32 and also when you use the geteltorito command, it is preferable to use the-o option rather than a redirection ">"syntax. " An article said that it is best to drop in a DOS command line using the USB boot, then run dosflash.exe from there, however, I could not edit the .bat file, but it is an option however.

  I hope this helps someone stuck in a similar situation.

• the system recovery media does not support this computer

  I have a HP G7-1365DX and the hard drive (750 GB) is a failure.  I did a recovery file on a USB key from the recovery partition and then replaced the hard drive with a 120 GB SSD.  When I tried to reinstall the USB system, I get the message "the system recovery media does not support this computer."  Is it because the hard drive was replaced by a SSD?  How to restore the system if the recovery disk does not work?

  Hello

  You are right about the source of this problem - HP recovery media often has problems of restoring the operating system on a smaller disk in quality than appeared on.

  There are a few options available.

  1. if the 750 GB drive is still able to operate, use your recovery media to perform a factory reset and then use software (or Windows 7 own imaging utility) for this clone of your SSD.

  2 create your own recovery media to use to run the installation - it would be my personal preference.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• MY RECOVERY MEDIA DOES NOT DV6-3170EE

  Hello, I have a HP Pavilion dv6 - 3170ee Entertainment Notebook PC Core I7, drive HARD 500, Ram 4

  I had a problem while I was trying to find my laptop. one of the brackets 5 recovery DVD does not work anymore. can someone help me find online recovery support please.

  Thank you.

  I'm looking for recovery media. Use the following URL.

  http://support.HP.com/us-en/document/bph07143

  I highly recommend that you order a usb instead of a disk set support. USB support is, unlike DVDs, very durable.

• roboformtaskbaricon process does not close after that firefox 9 is closed

  Hello

  roboformtaskbaricon.exe (v754) process does not close after that firefox 901 is closed. Even if I'm wrong, my guess is that firefox pushes this process of firefox, forcing him to run on its own. If it's a matter of roboform, then I will contact them.

  Thank you, specialist

  On the next page, scroll down to "RoboForm controls", then scroll down to 4. The taskbar icon under this heading. It seems that maybe the item to which you are referring. Taskbariconroboform .exefile name, it involves the Windows taskbar rather than the Firefox tool bar.

  • http://www.RoboForm.com/support/manual/RoboForm#files

  Clarification on roboformtaskbaricon.exe, its function and that it should close when you exit Firefox, Roboform online technical support contact and leave all the details of your question:

  • http://www.RoboForm.com/support/overview

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Satellite A30 - 203 - recovery disk does not work

  Hi all

  I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

  Thank you

  Hi dimation,

  It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

  In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

• For 1000-zx satellite recovery disk does not work

  XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.

  Hello

  Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
  However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
  In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.

  Good bye

• ENVY 15 3040 nr recovery disc does not

  Hello

  I made a recovery disk set as soon as I bought my ENVY 15. I accidentally deleted all partitions, then tried to recover by using the disks that I did... but I get this error by...

  The system recovery media does not support this computer.

  You are not able to restore the system with the media.

  0110 A9P60UA #ABA - A9P58UA #ABA

  Help, please!

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• My recovery CD does not work and will not install my genuine copy of Windows XP.

  XP Home Edition.

  I bought a computer acer laptop, which came with a pre loaded windows XP Home Edition. As I had to format the laptop for some reason, I used a pirated version of XP.  Now, I want to install the original version. I have the product key. My recovery CD does not work, because I had used the pirated version.  Pls help...

  You need to start using the CD - no existing OS - and install it to clean.

  It will wipe your drive first, back up your data on an external support.

• HP Pavilion g6-1278sa recovery partition does not

  Recovery partition does not work after the creation of new partitions. Where can I get the restore CD?

  Hello

  You can order a set of replacement recovery disks using the link below.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Recovery Manager does not recognize a flash drive

  Well, this is my second attempt to create recovery media, initially I thought the drive was defective and returned. I would go to 8.1 but would create recovery first. Recovery creator does not recognize the cross (SanDick Cruzer 16 GB) flash drive the forums and google around and have not really found a solution. Help please? Must I resort to buying discs for this purpose? I don't see any mention of this player being Win 8 compatible.  PC is the new HP Envy 1430. THX...

  natrldsastr wrote:

  I said in my initial inquiry, I can't find any compatible 'Win 8' claim for this device. The packaging claims to be compatible by the bias of Win 7, but no mention of 8. I knew it was a problem and had checked. Regardless, this disc is useless for the recovery of the system. Thanks for your time.

  Hello! Looks like you have a couple of choices for me. Use a PNY flash. Create an image of your operating system with a third-party App or get some DVD high quality. I agree that the drive is useless for the recovery of the system. I've seen your problem before on other forums and other products. I do not have the answer.

  Dokie!

  PS Perhaps SanDisk has a?

• APX1099 process does not respect the "output Destination.

  Hi friends!

  I have run the APX1099 process to print COPY B 1099 files and I'll put the 'output destination' until I run it:

  P.S. I have administrative privileges for this directory.

  

  But the files are generated in a different directory and I can not find where this directory has been created (\appserv\prcs\psdev\files\XMLP). The process does not have the 'output destination' that I put forward.

  Does anyone have an idea what could be causing this problem?

  P.S. The output location in report definition routine is defined as "all":

  

  Thank you very much for your help!

  Kind regards

  Tarsio Alvares

  Tarsio Alvares based on code, I see in the App Engine, writing of file is not managed.

  

  You can see that OutDestType = 6 (Web) and % OutDestType = 3 (printer) are dealt with. Technically, should also have some code for % OutDestType = 2 (file) to cover for the file option.

  You will need to write the following code to operate temporarily. Moreover, wear it like a SR with Oracle that this appears to be a delivered report and should be able to print to file.

  If OutDestType = 2 Then %

  & REPORT_DEFN. OutDestination = FilePath %;

  End - If;

  As follows:

  

  Let us know if that helps. Once I added this code, it seems to work very well when I'm printing to a file. Thank you!