Red notification badge does not...
A developer of reports that they can't seem to get the Red badge to work as a notification. They have a business account, they created all things properly on their end (so they said), their client did not stop insignia as a method of notification for their app (so they promised me) and everything as messages and background downloads are working properly. I told them, it is difficult to point out what is the problem, without being able to monitor all the steps and settings. But they hope that someone comes up with a common pitfall in this area. EC who on earth could they be dominant or hurt?
Is the application in kiosk? If yes then the Red badge never appear on the app, because everyone is treated by kiosk.
It's the only thing I can think of.
Tags: Digital Publishing Suite
Similar Questions
-
TPServer 8710 - Custom conference ending the notification text does not
Hi all
in our network, we have 8710 TPServer and etc.
the "Conference of custom ending the notification text" does not work
What do you advise?
tkanks a lot.
Hi Onur,
We have therefore 3 numbers
Conference custom ending the text of the notification, notification of CTS - Man 10 minutes and 2 minutes of GST.
This should be no Rendevouz for meetings,
-What version of CTSMAN?
-Do you see the BBFRR in CTS?
-See you BBFRR in C20?
-Do you think the meeting scheduled in CTS - Man?
-When in the conference can you send a normal text to CTS?
For one of the question:
Use of conference custom ending the notification text
Ending Conference custom notification text
End notification text Customer conference
If you check the help:
Use custom Conference end notification text allows the telepresence server to use a personalized message to warn participants that the Conference ends.
The telepresence Server uses a message by default unless you check and write a personalized message. The default message is that this conference is about to end.
Does not apply to the Cisco CTS endpoints. See the reference endpoint interoperability for more details
-Gonzalo
-
The red eye tool does not present as an option under the Clone Stamp tool. How can I access it?
What version of photoshop are you?
The red eye tool should be in the same location as the healing brush and Patch tools.
-
Skype notification sounds does not at all RESOLVED
On Win 7, I installed Skype 6.21 but notification sounds worked... When I checked the settings and tried to play all the sounds, it does not makes all the sounds as well.
I decided to uninstall it and install Skype 6.22, but it has the same problem... I checked google if there are similar problems, but I found only old Skype 5 forums and so on and no one has helped me solve my problem. No idea what to do?
RESOLVED: the reason why it didn't work was the scene of singing! For all those who have the same problem, the solution here:
Tools > Options > Audio settings, look for the "Ringtone" section, if said option 'speakers use selected', to 'double headphones and speakers.
In Skype, open Tools-> Options-> sounds. The text on the button says "Mute all sounds"? Be aware that if the text is "Activate all sounds", then all sounds are actually set on mute.
In addition, open Tools-> Options-> Audio settings. Which device is selected for "Ringing"?
-
red laser toner does not print on M476Nw MFP
Just bought a new HP Color Laserjet Pro MFP M476nw. all put in place smooth like silk, but the red ink will not print. I ran the calibration print several times but it isn't print a calibration page. It is said print document but nothing doesn't come out. What should I do next?
Hi DCLEE,
I'm sorry to know that you have problems with your new HP product.
This product has an internal calibration procedure, it does not print a page during or after calibration.
In addition to the calibration page, are you able to print other documents from the printer? I understand that printed pages do not encounter red (Magenta) color pictures.
Try printing a test page for the engine and check if all 4 colors are printed.
-
Red Alert 2 does not work?
Hey, I have a problem with red alert 2
that I can't start after the installation
the following error message appears
FATAL * string manager failed to initialize properly
can you help me please?
Hi Mohammed,.
Have what version/series of red alert 2 you installed?
Some versions of red alert 2 are not compatible with Windows 8. Please check the compatibility of the game by clicking on this link.
Kindly, follow these methods and check if that helps.
Method 1:
Right-click on the game .exe and choose Run as administrator.Method 2:
If this does not help, run the game in compatibility mode.Follow these steps:
a. right-click on the game (.exe) and click on Properties.
b. click the Compatibiliy .
(c) under "compatibility mode; section, place a check on "run this program in compatibility mode for".
d. Select Windows XP (or any other mode where the game is compatible).
e. click apply and OK.
f. now, try to play the game.
Let us know if it helps. If the problem persists, we will be happy to help you.
-
I think that this question is a little different from the others posted. I am not connected to iMessage on my phone. I think my MacBook is my Apple ID associated with it, but I've not logged in the App, and I already turned off all the boxes of banners/badges/alerts and unchecked everything in system preferences > Notifications menu.
However, the question that I find annoying, everytime I go to iMessage on my iPhone application appears at the bottom of the screen on my Mac, even if I am not logged in. Exit iMessage on my iPhone and it disappears on my Mac. There is nothing in common with my Mac, but its boring whenever I'm Messaging on my iPhone application appears on my MacBook, and I watch my Mac to see whats moving on the screen but its just letting me know that I have the app open on my iPhone iMessage. Does anyone know how to disable this feature?
I just want it to be completely gone and not follow when I open the iMessage app on my iPhone. Does anyone know how to do this?
Thank you!
Hi James b. Moore,.
If I understand your question, whenever you use the Messages app on your iPhone, you will see it appear on your Mac and you do not want the application on your computer, right?
Looks like you have the characteristics of continuity enabled on your Mac. The resources below will explain how to disable features such as transfer to separate the activities of your Mac and iPhone.
Continuity of use to connect your iPhone, iPad, iPod touch and Mac
Transfer procedure
With the transfer process, you can start a document by e-mail or message on a device and pick up where you left from another device. Transfer works with applications Apple such as Mail, Safari, maps, Messages, reminders, calendar, Contacts, Pages, Numbers and Keynote. Some third-party applications are also compatible.
Disable the transfer procedure
If you want to disable the transfer on your iPhone, iPad or iPod touch, go to settings > general > Handoff & suggested Apps. Can disable Handoff.
On your Mac, go in system of preferences > General. Can uncheck the setting allow Handoff.
With continuity, all SMS and MMS text messages that you send and receive on your iPhone may also appear on your Mac, iPad, and iPod touch. You can also meet your contacts from any device is closer to you, including your iPad or Mac.
You can start a conversation in the Messages application or click on a phone number in Safari, Contacts, or calendar.
Set up SMS and MMS with continuity
- You need to iOS 8 or later version on your device iOS and OS X Yosemite or later version on your Mac.
- Connect to the iMessage with the same Apple ID on your iPhone, your other iOS devicesand your Mac.
- On your iPhone, go to settings > Messages > Send and receive. Add a control to both your phone number and email address. Then go to settings > Messages > text Message Forwarding and turn on the device or devices that you want to transfer the messages. (Disable this function if you want no messages will appear on your Mac.)
- Looking for a code on the Mac, iPad, or iPod touch that you enabled. Then enter this code to check on your iPhone.
Take care
-
Notifications made does not sound when it is locked
Hello everyone, I have just converted to android to iPhone and I have a question that seems weird and apple support put me hold and hung up. So I got an iPhone 6s and an iwatch. This is the problem when the phone screen is locked notifications for texts come only through the Watch not watch it and the phone
me when someone calls the watch vibrates and phone rings properly fair notifications is messed up. I turn off the watch and the notification sound is normally on the phone I checked DND and the section of sounds and all that is very well it's not if. I checked the settings of the watch and the app shows and I see not everything related to notifications only through the watch I'm not new to Apple, I had, iPod and iPad etc I know my way around them. All ideas
Maldonw wrote:
Hello everyone, I have just converted to android to iPhone and I have a question that seems weird and apple support put me hold and hung up. So I got an iPhone 6s and an iwatch. This is the problem when the phone screen is locked notifications for texts come only through the Watch not watch it and the phone
me when someone calls the watch vibrates and phone rings properly fair notifications is messed up. I turn off the watch and the notification sound is normally on the phone I checked DND and the section of sounds and all that is very well it's not if. I checked the settings of the watch and the app shows and I see not everything related to notifications only through the watch I'm not new to Apple, I had, iPod and iPad etc I know my way around them. All ideas
There's nothing weird about this at all. If the phone is locked, the notifications are supposed to come through on the watch. Which works as expected.
You don't have the ability to disable detection of wrist in the application of the watch. If you do this, notifications will come across the two devices. However, you will need to enter a password on the extra hours of shows that you want more to look at the main screen, and you will not be able to use Apple pay.
-
Centre and focus of notification button does not
This has happened for a while and I thought assistive touch would be useful, but it is difficult to get used to him. I thought also update my phone could help the situation, but the only solution I know is reboot my phone. Basically, when I'm on my phone and I close an app using multitasking, I go back to the home screen and lower the center of notification. However, when I do that, it comes down half way and seeds. After the small problem I am unable to pull down my notification Center, then press my homescreen. The strange thing is I can always multitasking, but I can't go home. It spent a lot and it's super annoying. Send it please help my way if anyone knows how to solve this problem, thanks a ton!
Then, the Home button doesn't work or no?
If it isn't and you are still within the limits of the guarantee (one year of basic, 2 years if you bought AppleCare +) take it on an Apple Store or authorized for a service provider Exchange. Don't forget to save in question beforehand, you will receive an empty new/renovated unit, and you are responsible for your content. If it is out of warranty, you have to pay for an out-of-warranty Exchange, which is less than a new unit.
Do NOT try to fix it yourself or shop through some shady. The Home button is related to this specific phone and so distorted Touch ID will be NEVER WORK. In addition, future updates may fail as well.
-
Purchase was about a month to six weeks - waiting for the old cartridge to run out. Where red is normally printed is a shade of light green. Open to a suggestion of how to fix this problem. The printer is my old reliable Deskjet 990Cxi. The system is a HP Tower. works with Windows 7 SP2. This result occurs when the test page is printed when you install a new cardtrige (s) and when I print a document using Word with red symbology. There is no error message, just the eye ball and see that the page is incorrect. I bought HP cardtriges four or five times before with no problem, as long as they are not available in retail stores more.
Thank you very much, Bill [personal information deleted]
Okay Bill, because it is still under warranty I would say certainly contact HP telephone support on this issue, because I think that you will need a replacement cartridge.
Can you please let me know how you go?
Thank you
Ciara
-
Windows Update notification icon does not
Hello
On my laptop when there are available windows updates and then in the box notification blue windows update icon appears, download updates and tell me if I have to restart my computer. My father has a new office, also windows 7, and instead of this icon, the indicator for the Action Center pops up and says there are windows updates. How to do his job the same as mine? All settings inside the update of windows are the same.
Thank you
guru84,
Make sure you check the settings in the center of the action and the Notification area settings. Display icons in the Notification area of change Also will show a number of icons in the notification area. It is possible that when updates are available, the Windows Update icon is active, but just not visible. When you receive an alert Action Center, click the triangle to the left of the notification area button and see if the Windows Update icon is there. If this is the case, click on, and then drag it to the visible area.Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
notification message does not appear in the lock screen
Hello world.
I've been an IOS user for about 3 years.
Before 2 weeks, I bought a compact Sony Xperia Z3.
I am trying to know the Android mobile operating system, but it is still quite difficult for me.
I hope you can answer my questions and make me one day an Android user better.
My question is simple.
Can I have notifications in the lock screen for my messages unanswered and calls or other notifications that I missed?
I don't want to open all the time the screen lock to see who was my call without answer.
I tried all the settings, but it did not work.
If there isn't a way to do it, is there any app?
Floatify is also a good app for the lock screen notifications. I'm also new Android after 4 years with iPhones. It is difficult to get used to!
-
Network notification icon does not not for left click.
Hi all. All of a sudden my icon in the notification area network connection seems to be insensitive to the left click. This must, of course, open the "currently signed to" connect/disconnect menu type, IE: http://i.technet.microsoft.com/ff847520.Davies.CG.0710.Fig1(en-us,MSDN.10).jpg
Here are a few things I checked:
- Left click works on other icons.
- Right-click on the icon (which works), go to network and sharing Center and clicking 'connect or disconnect' works by triggering the appropriate menu.
- Icon from disabling and re-enabling it.
- Apart from this the icon looks in good condition, and all my network seems to be good too.
Any help would be greatly appreciated!Hi Keith d.c,
Put the computer in safe mode with network and see if the problem persists:
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
If the problem is not repeated in safe mode, there is probably a startup item or service is causing the problem. Follow the steps on the following link to locate the item or service is causing the issue:
http://support.Microsoft.com/kb/929135
Cody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
DPS Push Notification certificates does not
I created three sets of certificates APNS today (my old which had expired) to edit and submit to Apple and existing Viewer application. None would work in the DPS App Builder.
Finally, I discovered this alert in the screenshot. Is this normal?
How can I change the validity? Where in the hell is this time came?
Thank you!
It is a known bug in the App Builder v26 version if you wait until the 17:01 your new certificates will work. You can also set your system before according to 17:01 clock and then go through App Builder.
Neil
-
BlackBerry Smartphones red LED does not
My bright red LED message does not at all. How doi switch on? Please be specific to the topic where the icon or other path lie, thank you... (you wish that I did not leave the ATT store to talk to me in this unit!)
The LED may blink for several reasons... the a main notification messages.
To change a profile of notification on a BlackBerry smartphone using BlackBerry® Device Software 6.0, follow these steps:
- On the BlackBerry smartphone home screen, click profiles.
- In the notification profile list, click on change sounds and alerts.
- Click on sounds for the selected profile.
- Click on the application to change. Example: Messages Messages, calendar or level 1.
- Make the changes.
- Open the Menu and click Save.
In step 4 above, click your messages and a corresponding email account, you will see the function of Visual alerts, the value IT for the red LED flashes when you receive a message.
Maybe you are looking for
-
Favicon of the reserved site will not update
A few days ago, I changed a favicon on one of my sites and still my favicon in bookmarks Firefox remains the old favicon with constancy and will not update to the new! I tried "forget history" for the site and looked where Firefox stores the bookmark
-
I use c# with NET4.0. I would use the 'Task' object in the system. Threading.Tasks for parallel processing. But 'Task' is already defined in namespace DAQmx. I find that I have to explicitly state the namespace (or the other system. Threading.Tasks o
-
S10e: External screen flicker
I bought a S10e in Germany, a black version with 160 GB HDD, 1.5 GB of RAM. But since it could be the design function, it could hold for other netbooks as well. When you connect an external monitor to my netbook, it starts blinking (lines as if you h
-
Everyone in the House can connect wirelessly with the exception of my laptop wireless
Original title: Mr. gustavo Hi can you please help me, everyone in the House are connected to internet wireless lapto, Im the only one can not get internet connection with my wireless lapto, can you please advice me. Thank you very much. Rigards, gus
-
USB key shows in 'remove hardware safely', but not under the heading of discs
The first time I used this USB flash drive, I transferred my library iTunes from my old computer to my new laptop and it worked, but now when I plug the flash drive, nothing comes up on my laptop. The flash drive will appear on the taskbar under 're