Reg: Error when connecting to a remote database as user SYS.

Hi all

When I try to connect to a database as user SYS I get the error as

ora-01017 invalid username/password denied logon

But it is the registration of the local system where the oracle is installed.

I created the password file and check the content in v$ pwfile_users.

The result is "no selected lines.

then, when I try to grant sysdba to user sys

grant sysdba to sys.

I get the error message like,

ORA-01994: GRANT failed: password file missing or disabled

Please help me solve this.

Kind regards

Konda

Hello

Its should be like

orapwd.exe file=E:\app\Administrator\product\11.2.0\dbhome_1\database\pwdEE.ora force = entered y = 30 = password

HTH

Tags: Database

Similar Questions

Resolved - getting error when connecting to the remote database to the host

Hello
I try to connect to the remote form of database host and get error. Can someone please help.
I've seen a few threads about similar issues, but I am not able to solve this problem.
I use Oracle Apps 12.2.0, Linux 5.1, Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit, using SQL Developer to connect.
I am able to connect using SQL Developer in distance and using the same credentials in SQL Developer host, but in error
Status: Failure-Test failed: IO Error: Connection reset
The host
I am able to ping remote, but cannot tnsping
The tnsping error-
Use settings files:
C:\app\oracle\product\12.1.0\dbhome_2\NETWORK\ADMIN\sqlnet.ora
EZCONNECT adapter used to resolve the alias
Try to contact (DESCRIPTION = (CONNECT_DATA = (SERVICE_NAME =)) (ADDRESS = (PROTO
(COL = TCP)(HOST=192.168.1.102) (PORT = 1521)))
AMT-12547: TNS: lost contact
Here are more details
I have added the following in the TNSNAMES file. ORA file
SCREW =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.1.102)(Port= 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = SCREW)
)
)
I have added the following in the listener
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.1.102)(PORT = 1521))
)
)
Finally - the firewall is disabled in Linux Machine

Can you ping the server IP (or nomhote.nomdomaine) address of the client machine?

What is the error you get when you issue "tnsping SCREWS" of the client machine?

You have added the following entry to your client's tnsnames.ora file?

+++++++++++++++++++++

SCREW =

(DESCRIPTION =

(ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.1.102)(Port= 1521))

(CONNECT_DATA =

(SERVER = DEDICATED)

(SERVICE_NAME = SCREW)

)

)

+++++++++++++++++++++

Can you reproduce the problem with sqlplus? If so, please see (11.5.10 news: run SQL * Net access for guests (Doc ID 291897.1)).

If the problem with SQL Developer only, please see (SQLDeveloper receives ' java.sql.SQLRecoverableException: IO Error: Connection reset "and ORA - 609 database alert (Doc ID 1483287.1)).

Thank you

Hussein

ORA-12560 error adapter, connect to the remote database
I started to learn Oracle for the last week or two, and certainly my installation process was a bit special. In the end, I try JBoss to connect to the database, but for now, I just want to try a simpler installation.

I use Instant Client on Windows 7 with Oracle 11.2 running on a RedHat 5 virtual machine. When I connect with the following...

sqlplus sys@domain:1521/sid

It crashes, it's finally time. When I use...

sqlplus sys as sysdba @domaine: 1521/sid

It asks for my password, then gives me the error of the adapter, after I get it.

My listener status is:

LSNRCTL for Linux: Version 11.2.0.1.0 - Production on February 21, 2012 16:27:16

Copyright (c) 1991, 2009, Oracle. All rights reserved.

Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
STATUS of the LISTENER

Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start date February 20, 2012 15:28:54
Operating time 1 days 0 h 58 min 21 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /var/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file
The listener log file /var/app/Oracle/diag/tnslsnr/SSC-redhat64/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=domain) (PORT = 1521)))
Summary of services...
"Sid" service has 1 instance (s).
"Sid" instance, status UNKNOWN, has 1 operation for this service...
Service 'sid.domain' has 1 instance (s).
"Sid" instance, State LOAN, has 1 operation for this service...
Service 'sidXDB.domain' has 1 instance (s).
"Sid" instance, State LOAN, has 1 operation for this service...
The command completed successfully

My main reason to use Instant Client is simply to test the connection to the database remotely. What other information should I post? Any help would be much appreciated.
>

ORA-12504: TNS:listener did not have the SERVICE_NAME in CONNECT_DATA

Try with quotes around the part of login id, for example

C:\>sqlplus user@'hostname/test'

Error when connecting with the Remote Console

We get the attached error when you click on a paralytic to vCloud Director. The inner coating IP address is the ip address of the proxy console. Any ideas what might be causing this error? I thought, it might be something with my SSL certificate, but I'm not sure.

1. it's a Windows 7 view Client using IE 9

See the installation and configuration (https://www.vmware.com/support/vcd/doc/rel_notes_vcloud_director_10.html) guide, IE 9 is not supported, and only browsers supported on Windows 7 are Windows and Firefox 3.* 8.*.

2. it takes about 1 minute and 45 seconds, but the error pops up 2 seconds after the Remote Console window opens.

Certainly, that's the problem here. It shouldn't take 1 minute and 45 seconds for the remote console to pop up window, in fact, I would say that it should begin in a few seconds (certainly less than 10 seconds). You are not sure if it's because of IE 9?

4 see attachment log of error messages when trying to access the virtual machine

The error message looks like it tries to connect to my server vCenter. Do the users who are connected to vCloud Director must be able to connect on the server vCenter Server? I thought it would just use the user that configure you when you connect on the vcenter Server.

The console proxy (a component of the cell of vCloud Director) acts as a proxy for users connected to vCloud Director. It is the latter that connects to your vCenter Server server, and that's what you read in the papers.

Try this on any other OS/browser support matrix. In addition, if you can dig why it takes more than 10 seconds for the remote console to the pop-up window, you would have found yourself a solution. If this does not work, contact the Support of VMware.

Error connecting to a remote database access violation

I have the software on my machine (written in-house by a company I work for) to connect to a remote database from home. I have connected several times without problem, but recently I immediately get an error message as follows: "Access violation at address...". ' followed by the hexadecimal address number, when I click on the "connect" button after entering the login information. The only thing I can think of that is different is that I have changed recently, is my anti-virus software. I tried to uninstall the new software temporarily, and disable the Windows Firewall, but the problem persists. So I just can't connect to the database. This who should I look to fix this? Thank you

Hello

Check with a different user profile

If you do not have a different user account, you will need to create a (see link below). If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

Create-a-user account

http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

Difficulty of a corrupted user profile

http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

You can also try contacting the Publisher of the software and for further assistance.

Connecting to a remote database (slowed down) with the password file authentication
Hi all

I was wondering if it is possible to connect to a remote database is stopped (idle instance) as user sys with sysdba privileges? It is said in the Oracle book - one to page 210 in the section - operating system and the file password authentication:

Connection with authentication by password file or operating system is always possible, any State of the instance and the database are in and it is necessary to issue commands to START or STOP.

Above indicates that it is possible, but I can't do it.

I managed to connect to the remote database that was in mode nomount (see below for more details).

When I first tried to connect to a remote database (idle instance) using the password file authentication, it gave due to error:

sqlplus sys@ORCL as sysdba
SQL * more: Production of the version 11.2.0.3.0 Fri dec 21 13:59:28 2012

Copyright (c) 1982, 2011, Oracle. All rights reserved.

Enter the password:
ERROR:
ORA-12514: TNS:listener is not currently of service requested in connect
descriptor of

Enter the user name:

After the start of the database in nomount mode I was getting following error:

sqlplus sys@ORCL as sysdba
SQL * more: Production of the version 11.2.0.3.0 Fri dec 21 13:48:36 2012

Copyright (c) 1982, 2011, Oracle. All rights reserved.

Enter the password:
ERROR:
ORA-12528: TNS:listener: all appropriate instances are blocking new connections

Enter the user name:

Then I added the clause (UR = A) my listener.ora file and after that it work and I was able to connect:

sqlplus sys@ORCL as sysdba
SQL * more: Production of the version 11.2.0.3.0 Fri dec 21 14:04:49 2012

Copyright (c) 1982, 2011, Oracle. All rights reserved.

Enter the password:

Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
With partitioning, OLAP, Data Mining and Real Application Testing options

SQL >

I have all the entries of necessairly in tnsnames.ora on my local host.

Also, I have no problems when connecting as user sys with sysdba when the DB is open, but can't get it working on an idle instance.

I know I can use OS authentication but want to know if there is a mistake in the book or I'm doing something wrong.

Kind regards
Dawid

Edited by: 978239 2012-12-21 06:24
I was wondering if it is possible to connect to a remote database is stopped (idle instance) as user sys with sysdba privileges?

You can, but you need to statically register the database with the listener.

ORA-02019: description of the connection to the remote database not found

Hi all

10.2.0.4 on solaris 10.

I can tnsping and connect to a tnsentry in tnsnames.ora from the server, but when I use the same in dblink, get the error below:
ORA-02019: description of the connection to the remote database not found. Here's the scenario. any idea?

medt01:medtora:/medt/oracle/product/102/network/admin$ tnsping medcon

TNS Ping Utility for Solaris: Version 10.2.0.4.0 - Production on 09-NOV-2011 23:49:23

Copyright (c) 1997,  2007, Oracle.  All rights reserved.

Used parameter files:
/medt/oracle/product/102/network/admin/sqlnet.ora


Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.102)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = medcon)))
OK (20 msec)
medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medts_ed/medfcv@medcon

SQL*Plus: Release 10.2.0.4.0 - Production on Wed Nov 9 23:49:31 2011

Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.


Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medts_ed/medfcv@medcon

SQL*Plus: Release 10.2.0.4.0 - Production on Wed Nov 9 23:59:54 2011

Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.


Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
medt01:medtora:/medt/oracle/product/102/network/admin$ tnsping medcon

TNS Ping Utility for Solaris: Version 10.2.0.4.0 - Production on 10-NOV-2011 00:00:02

Copyright (c) 1997,  2007, Oracle.  All rights reserved.

Used parameter files:
/medt/oracle/product/102/network/admin/sqlnet.ora


Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.102)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = medcon)))
OK (0 msec)
medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medts_ed/medfcv@medcon

SQL*Plus: Release 10.2.0.4.0 - Production on Thu Nov 10 00:00:07 2011

Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.


Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medc_pl/medxcdsw3

SQL*Plus: Release 10.2.0.4.0 - Production on Thu Nov 10 00:00:17 2011

Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.


Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options

SQL> create database link med2con connect to medts_ed identified by medfcv using  'medcon' ;

Database link created.

SQL> select * from medc@med2con;
select * from medc@med2con
                            *
ERROR at line 1:
ORA-02019: connection description for remote database not found

Try this,

SQL > create database link med2con connect to medts_ed identified by using medfcv ' (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.0.102)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = medcon)))';

SQL > select * from medc@med2con;

ORA-17629: unable to connect to the remote database server
Hello

I have put Dataguard in place with primary and 1 physical standby for learning/test database:

I do NOT plan the unloading of RMAN backups on the physics of the day before.

Recorded the primary database with RMAN and when "resync catalog db_unique_name all;" is issued.
I get the following error:
---------------------------------------------------------------------------------------------------------------------
RMAN > catalog resync db_unique_name all;
from full resynchronization of the recovery catalog
full complete Resync
resynchronization of data base with DB_UNIQUE_NAME ASTTESTB
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failed to db_unique_name resynchronization command at 28/09/2011 11:34:23
ORA-17629: unable to connect to the remote database server
ORA-17628: Oracle 17629 error returned by remote Oracle Server
------------------------------------------------------------------------------------------------------------------
Configuration of RMAN for the main proceedings are the following:

RMAN > show all to db_unique_name asttest;

RMAN settings for database with db_unique_name ASTTEST are:
CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
CONFIGURE BACKUP OPTIMIZATION # by default
SET UP DEFAULT DISK DEVICE TYPE; # by default
CONFIGURE CONTROLFILE AUTOBACKUP # by default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
CONFIGURE ENCRYPTION OF DATABASE # by default
CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default

Configuration of RMAN for instance physical standby are:

RMAN > show all to db_unique_name asttestb;

RMAN settings for database with db_unique_name ASTTESTB are:
CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
CONFIGURE BACKUP OPTIMIZATION # by default
SET UP DEFAULT DISK DEVICE TYPE; # by default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
CONFIGURE ENCRYPTION OF DATABASE # by default
CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default

----------------------------------------------------------------------------------------------------------------------

When I tested missing missing datafile and control file scenario on the primary database, it worked (Advisor to recover data)

However, missing datafile scenario does not work on the physics of the day before.
Here are the steps I followed:
********************************************
1 renamed a file of physical data - in standby mode:

bash - $3.2 ls - ltr

Total 107832

-rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log

-rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf

-rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf

bash - $3.2 mv rmandg_data01.dbf rmandg_data01.dbf_old

bash - $3.2 ls - ltr

Total 107832

-rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log

-rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf

-rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf_old

2. restore the datafile (find the data file # view v$ recover_file):
RMAN > restore datafile 5;

From restoration to 5 October 11

Segmentation fault

3. in spite of the error, published "recover datafile command.

4 RMAN > recover datafile 5;

From pick up to 5 October 11

allocated channel: ORA_DISK_1

channel ORA_DISK_1: SID = 10 type of device = DISK

RMAN-00571: ===========================================================

RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

RMAN-00571: ===========================================================

RMAN-03002: failure of the command recover at 05/10/2011 12:00:40

RMAN-06094: datafile 5 must be restored.

5. manually copy the physical primary datafile - in standby mode, & then problem recover RMAN command:
bash - $3.2 scp oracle@msudrainier:/ora03/oradata/asttest/rmandg_data01.dbf.

rmandg_data01.dbf 100% 50 MB 16.7 MB/s 00:03

bash - $3.2 ls - ltr

Total 159096

-rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log

-rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf

-rw - r - 1 oracle oinstall 52436992 5 Oct 11:49 rmandg_data01.dbf_old

-rw - r - 1 oracle oinstall 52436992 5 Oct 12:01 rmandg_data01.dbf

RMAN > recover datafile 5;

From pick up to 5 October 11

using channel ORA_DISK_1

RMAN-00571: ===========================================================

RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

RMAN-00571: ===========================================================

RMAN-03002: failure of the command recover at 05/10/2011 12:01:59

RMAN-06067: RECOVER the DATABASE required with a backup control file or created

6. of course RMAN commands have failed to restore the missing data file;
So I renamed the file to original and rebooted repeat services applies - this restore the data file and now the configuration state of the DG is normal.
*********************************************************************************

Not quite sure if I'm still he hands the right way or if the error above is related to RMAN not able to synchronize with the physics of the day before.

The documentation I want to talk to is here (1 paragraph):

[http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD | http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD]

Any pointers/direction and advise is greatly appreciated.

Best regards
NK
I got it!
```
/home/oracle:STANDBY >$ORACLE_HOME/bin/rman target sys/ catalog /@rcatalog

Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 7 14:12:10 2011

Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

connected to target database: PRIMARY (DBID=1562898590, not open)
connected to recovery catalog database

RMAN> resync catalog from db_unique_name all;

resyncing from database with DB_UNIQUE_NAME PRIMARY
starting full resync of recovery catalog
RMAN output not resynced for database with DB_UNIQUE_NAME PRIMARY
full resync complete
```
If the necessary connection string a target/sys and a catalogue

RMAN target sys / catalog /@rcatalog

I did my standby

Will try the primary

Best regards

mseberg

Work on both. Great question!
```
connected to target database: PRIMARY (DBID=1562898590)
connected to recovery catalog database

RMAN> resync catalog from db_unique_name all;

starting full resync of recovery catalog
full resync complete

resyncing from database with DB_UNIQUE_NAME STANDBY
RMAN output not resynced for database with DB_UNIQUE_NAME STANDBY

RMAN> 
```
Published by: mseberg on October 7, 2011 14:16

Thanks a ton for sticking to it. I'll add this little thing to my web site.

Published by: mseberg on October 7, 2011 14:22

DOUBLE DB: ORA-17629: unable to connect to the remote database server
[oracle@ora11g1 ~] $ export ORACLE_SID = sales
[oracle@ora11g1 ~] $ rman target sys/sales@sales

Recovery Manager: release 11.2.0.1.0 - Production Wed Jun 5 13:00:15 2013

Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.

connected to target database: SALES (DBID = 690066655)

RMAN > Connect auxiliary sys/salestby2@salestby2

connected to the auxiliary database: SALES (not mounted)

RMAN > CURRENT SPFILE DATABASE of TARGET duplicate FOR THE EVE OF the DATABASE
2 > DB_NAME SET = 'sales '.
3 > SET DB_UNIQUE_NAME = "salestby2".
4 > control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl SET'
5 > SET DB_FILE_NAME_CONVERT = "/ u02/oradata/sales /", "/ u02/oradata/salestby2 / '.
6 > SET LOG_FILE_NAME_CONVERT = "/ u02/oradata/sales /", "/ u02/oradata/salestby2 / ';

From duplicate Db 5 June 13
using the control file of the target instead of recovery catalog database
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID = 20 type of device = DISK

content of Script memory:
{
backup that copy reuse
TargetFile ' / auxiliary format of the u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales
' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora';
clone of SQL 'alter system set spfile = "/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora";
}
execution of Script memory

From backup 5 June 13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 58 type of device = DISK
RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/06/2013 13:05:26
ORA-17629: unable to connect to the remote database server
ORA-17627: ORA-01017: name of user and password invalid. connection refused
ORA-17629: unable to connect to the remote database server
continue other job steps, not a not working will not re-run
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of Db in dual at 05/06/2013 13:05:27
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/06/2013 13:05:27
ORA-17629: unable to connect to the remote database server
ORA-17627: ORA-01017: name of user and password invalid. connection refused
ORA-17629: unable to connect to the remote database server
Welcome to the oracle forums!

Please take the time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535] FAQ PAGE

Always after 4 version oracle numbers and details of the OS.

Post any request outside has put between.
```
  \
```
Tags

Mark your questions answers if you give the answer

Password for the SYS user on primary and standby must be the same. Copy the master password for the backup server

SCP $ORACLE_HOME/dbs/orapwv112 : /u01/app/oracle/product/11.2/dbs/orapwdupv112

error when connecting with SmartConnection inCopy

Hello world
I had to install Adobe inCopy for Clients in my workplace. After installing it, I use a SmartConnection and an installer of fix to this issue. She successfully for almost all customers except one, I still get the error when connecting with the SmartConnection. When I open the event logs, he said that it is related to public.dll plugin.
I was installing it again and again and it's always the same error that pop up.
The customer is a 64-bit Windows 7.
Some help would be welcome.
Best regards

Problem solved

D1370 "Scan type not the Remote Scan value... "Why this error when connected via USB

Printer D1370 MF w / usb on win7 x 64 machine connection.

I understand that when networked, I owe to the printer and manually press , then then before you scan using the software MF Toolbox on my PC and then must go to the printer once the scan is complete and cancel this setting manually before I can print or use other functions. What is total pain BTW...

However, I also have a MF6530 and can scan directly from MF Toolbox without manually change the setting of the printer when connected via USB.

So, I would like to connect one of my PC via USB for scanning to eliminate the requirement to manually configure the printer for the mode. But, when I do this I always get the error "type of analysis is not defined for [Remote scanner] on the device" even though I am connected via usb.

1. I do something wrong when I try to scan via a usb connection that causes the error "remote scanner?

2. that this has something to do with D1370 being a network printer. My MF6530 isn't a network printer.

3 is there a manual for the software MF Toolbox? The manual on the installation disc is for 'Send email' and 'Store to Shared Folder. The manuals provided in the box do not address MF Toolbox. There must be a detailed operating manual provided by Canon for this program?

4. What is the error Code 162,0,0?

5. where is the complete list of the error codes for MF Toolbox.

6 help!

Hi monza.

I know that this issue is frustrating and I'll be happy to help you.

The new imageCLASS machines are designed so that you can select an option to scan the machine. There is no way to set a default scan on this computer option. You will need to select [Remote scanner] or [computer]. This is to ensure that your device correctly handles the scan project. For this reason, the ability to program a specific mode is not available.

Although an extra step to make, an advantage to choose the mode desired for a respective scanning can ensure that poor communication of scanner does not occur if it was programmed to a different mode.

The 162,0,0, the error indicates the Toolbox does not detect the scanner mode "Remote Scanner. Scanning is not supported with a connection on the USB hub, as the hubs can cause communication problems, trying to transmit data to the computer. We recommend a direct connect between the printer and the computer. Once you have connected the printer directly, perform the following steps and check if you receive the same error 162,0,0:
1. Check that the MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
2. Select [Remote scanner], then press [OK]. The display reads, "remote scanner. Waiting in line... ».
3. On the computer, open the MF Toolbox and select [PDF].
4. Click the [START] button green on the window [PDF]. The machine begins to deal with the scan.
Then I recommend to download and install the e-manual for the device to your computer. It gives very detailed instructions on each of the functions of the machine. The e-manual should be included in the manual on CD-ROM supplied with the machine. If you are unable to access it from there, please click the link below to download the electronic Handbook:

imageCLASS D1370 - Brochures & manuals

I hope this information is useful for you. However, if you need more assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

How can I fix an 'Access denied' error when connecting to mySQL database to a site (I'm sure I can get...)

Hello
I had a search on the forums and I don't see anyone with the same problem so I apologize if this has been asked before.
I need to connect a database to a Web site so that members can register and save it to some pages (not all pages - only a 'members only' section).
I created the database, tested and it works very well (I used XAMMP/PHPmyAdmin).
In DreamWeaver CS6, I chose the type of document from the page (PHP) and set up the testing server. If I go to site Configuration > server for the site and click on test, it connects successfully. Note that the test server is hosted at the University, that I work - there is a password required, but I entered it on the test set up server and it seems connects very well, as I get the message successfully at this stage.
When I go to connect the mySQL connection and select the database I get the error "access is denied. The file exists may not, or there could be a permission problem. Make sure you have permission on the server and the server is properly configured. »
Any ideas? It's driving me crazy!

I understand that after several unsuccessful searches on Google, so I post the solution here for someone else with the same question that could end up here.

If you configure your test server in the inetpub/wwwroot/folder then Dreamweaver cannot make changes (such as adding files) unless you are running as an administrator, so it occurred to me that maybe the database connections are also affected. Of course, as soon as I leave Dreamweaver and restarted as an administrator, I was able to connect to the MySQL database using the databases Panel. If you don't know how to run a program as an administrator, it is pretty easy: just right click on Dreamweaver icon and select "Run As Administrator" when you start the program. There are a lot of tutorials out there that can give you the necessary steps for always loads a program as an administrator if you don't do right click every time.

Version: Dreamweaver CC 2015.

Error when connecting

I get this message when connecting:

Runtime error!

Program C:/Program F

Message indicates this program caused the term to terminate in an unusual way. Contact the program support team.

In my view, that it is a Microsoft problem?

Bill Pharr

* Deleted for privacy *.

Hi Bill,

I understand your concern and I am ready to help you with your problem. To isolate the problem, please specify what type of program or software you're trying to connect with?

Thank you

JoeM

"Cannot display Page" error when you click the Remote Agent

Hello world! ACS SE 4.0, we have installed and we have added a remote agent running on Windows Server 2003. Recently, we encounter "Cannot display the page" error when we click on the RA under a group of network devices. It's resolved by restarting the device SE ACS and access the web console for ACS still once, but after a few hours, the problem reoccur. By clicking on the links on the web console for ACS is OK at first, but after clicking on the RA, each link displays the error "Unable to display the page." Hope you could help me with this problem. Any person support is much appreciated.

Thank you!

Hi Jas,

Here is the bug CSCsg40444.

Kind regards

~ JG

Note the useful messages

Connection to the remote database using Oracle 11 g Builder
Hi all

This could me stupid question, but I have installed Oracle Forms and reports 11g on Win 7 machine. I copied the file "tnsnames.ora' on the record ' ORACLE_HOME/Network/Admin". We use Oracle EBS R12 and I want to create a new report using 11 g.

Using the report wizard after providing a simple query, we need to connect to the database. And even after the entry of TNS, I am getting error connecting to the database, following
"REP-0501: the specified database can be connected.
"ORA-12154: TNS: could not resolve the connect identifier specified.

I am able to connect to the same database using the Report Builder (10.1.2.0). Is there another place where I need to set the TNS entry? How can I solve this error? Please guide...

Kind regards
Priyanka
Hello

In forms and reports 11g, default defined in tnsnames.ora is: ORACLE_INSTANCE\config.
Please note that the ORACLE_INSTANCE is not the same as ORACLE_HOME.
Example:
ORACLE_HOME = D:\Oracle\Middleware\as_1
ORACLE_INSTANCE = D:\Oracle\Middleware\instances\asinst_1

If you set the admin TNS_ADMIN variable in the registry, you can point to a new location for tnsnames.ora

Kind regards
Alex

If someone useful or appropriate please mark accordingly.

Reg: Error when connecting to a remote database as user SYS.

Similar Questions

Maybe you are looking for