Regarding conflicts

Similar Questions

• Table view is different in expdp/impdp?

  11.2 / Linux
  
  With exp/imp original: OWNER, TABLES and FULL modes are mutually exclusive. IE in original exp, if you want to make a backup of the EMP table in the scott schema, the following will be error
  

  exp / tables= EMP owner=SCOTT file=selected_tables.dmp log=selected_tables.log
  
  But this will end up in
  EXP-00026: conflicting modes specified
  EXP-00000: Export terminated unsuccessfully

  You must prefix the name of the owner (tables = < owner >. < table_name >) as below for the prescription above
  

  exp / tables= SCOTT.EMP file=selected_tables.dmp log=selected_tables.log

  But in impdp things work differently
  
  I provided a dump expdp of REG_TRACK_EVT of a CLS_USR_PROD scheme. I wanted to import that table in the schema of development CLS_USR_DEV. So, I did. But launch error ORA - 39166 TI kept as below
  

  $ impdp userid=\'/ as sysdba\' DIRECTORY=DPUMP_DIR DUMPFILE= reg_track_evt.dmp LOGFILE=reg_track_evt-imp.log tables=CLS_USR_DEV.REG_TRACK_EVT
  
  Import: Release 11.2.0.1.0 - Production on Mon Jul 30 18:24:32 2012
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  ORA-39002: invalid operation
  ORA-39166: Object CLS_USR_DEV.REG_TRACK_EVT was not found.

  To solve this problem, I had to remove the parameter TABLES (!) and use the REMAP_SCHEMA parameter

  impdp userid=\'/ as sysdba\' DIRECTORY=DPUMP_DIR DUMPFILE= reg_track_evt.dmp LOGFILE=reg_track_evt-imp.log REMAP_SCHEMA=CLS_USR_PROD:CLS_USR_DEV

  If this is the case, then what's the point of having the TABLES parameter in impdp?

  It's really the same thing regarding conflicting modes. Of what you have used in your import command:

  Impdp userid =------"/ ACE sysdba\ ' DIRECTORY = DUMPFILE DPUMP_DIR = LOGFILE reg_track_evt.dmp = reg_track_evt - imp.log REMAP_SCHEMA = CLS_USR_PROD:CLS_USR_DEV

  If you are remapping CLS_USR_PROD:CLS_USR_DEV then the table in the dumpfile is called CLS_USR_PROD. REG_TRACK_EVT and you tried to import CLS_USR_DEV. REG_TRACK_EVT and this table did not exist.

  What you specify on the tables = command is the table in the desired dumpfile. What you specify in the remapping of the color settings is where you want the table created, therefore, your first order was close, you need this:

  Impdp userid =------"/ ACE sysdba\ ' DIRECTORY = DUMPFILE DPUMP_DIR = LOGFILE reg_track_evt.dmp = reg_track_evt - imp.log tables = CLS_USR_PROD. REG_TRACK_EVT REMAP_SCHEMA = CLS_USR_PROD:CLS_USR_DEV

  I hope this helps.

  Dean

• Site not editable by a computer, ok on others, no errors. ?

  I have a site up and running. Can be edited on 3 different computers, but a computer can't. No errors. Can connect, press "Change", but nothing happens. No errors. No toolbar does appear. (windows machine).  Any info regarding conflicts of browser or firewall or anything that is appreciated. (try to get the list of configuration of the particular computer right now). Thank you. JO

  I think it is most likely a browser specific problem (if it is a local connection problem)... the code works well on my end. They need to ensure they have "ACTIVÉ JavaScript". If their browser blocks (as does most of the default IE browsers), it will not be loaded. IE usually appears the warning in the toolbar.

  

  You have ALL the custom rows added to your .htaccess file? Any redirect page on the hosting server?

  ****************************************

  I had some fundamental problems of unstable and invalid markup. I know it doesn't directly relate to your question, but sometimes it can cause small behaviors can arise (other unstable behavior browser, you risk a few scripts break)

  I made a few minor changes that I see can cause other problems on the road (because it wouldn't validate as transitional 4.01 in all cases):

  • Links for js & css now have direct paths to http://
  • character set ISO-8859-1 to UTF - 8
  • 4.01 Transitional to XHTML 1.0 Transitional
  • outsourced all THE CSS (created "main.css" and a link to the style sheet). You had a sheet outsourced or not already.
  • deleted the comments nested in the CSS (nested comments has been known to throw a few errors)
  • Validated ALL the code valid XHTML & CSS 2.1

  We you invite to copy & use them, see if that makes a difference at the end of the customer. Make sure they do a CTRL - F5 to update their local cache.

  Things you need to do:

  • Download and unzip the attached files.
  • Download main.css in the same place as business.css
  • Enter your "alt tags" to all your images. I currently have their value alt = "enter the name of the image" for purposes of validation.
  • Rename, save, download the html file.

  I would like to know if any of this helps... and I'll be waiting for your answer on this point and the info on the customers put in place... especially the version of the browser.

  -Tom

• Re: Satellite P300 - conflict with the display driver

  Yesterday, I suddenly had a conflict with my display driver. While working on my laptop, a blue screen appeared and then the screen went black and stayed like that. When you use an external monitor, it is possible to start in SafeMode (in normal mode, a blue screen appears). It is possible that a Windows Update has occurred, but I can nog
  cancel anything (no Windows recovery point).

  I uninstalled the display driver and downloaded the latest version, but it doesn't seem to help. Reinstalling Windows won't work or the other cause the installation DVD detects a hardware error (the display driver).

  Does anyone knows how to fix this?

  Kind regards
  Jeroen

  Hey Buddy,

  > Reinstall Windows won't work or the other cause the installation DVD detects a hardware error (the display driver).
  What Windows disk, you used exactly?
  Normally before starting with the installation of Windows, you must format the hard disk and create partitions. If everything is clean at the disk Windows installation starts.

  I advise to use the Toshiba recovery disc. This disk can restore the original settings of the case and before Installation starts the drive HARD to wipe completely.

• Satellite P100-354: Droping of frame while playing World in Conflict

  Hello

  I have a most unusual with my p100-354(geforce 7900 512mb, core 2 duo 2.0 GHz, 2 GB RAM) problem when I play World in Conflict I have way to 31 FPS in a resolution of 1280 x 800 and almost all the details to salvation, but I get constant image every 5 seconds to zero! for about a quarter of a second and all is ok for 5 seconds and the new framework fall to zero for the blink of an eye and so on and on.

  Strange thing is that Bioshock is working normally mode 1280 x 800 on high detail so I really don't understand what could be wrong. Oh and I have the same problem in Falcon 4.0 allied force (game 4), but only when I apply a patch to support screen (1280 x 800, 1440 x 900), so it is probably from material but I do not know what part of it? Would it be possible, it's the same problem as in windows vista and all 5 seconds stuttering?

  Please help I have downloaded all latest drivers and nothing helps!

  Hello

  I think that it s a Vista and world to the problem of compatibility of conflict:

  Please read this article:
  078 http://www.Computerworld.com/action/article.do?command=viewArticleBasic&articleId=9011 & pageNumber = 1

  It seems that games designed for DirectX9 don t run smoothly because of the conflict with the new Vista directly 10.

  To my knowledge, Microsoft has already released patches.
  Maybe you should take a look in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24157&MessageID=95902𗚞

  Best regards

• Satellite P300D - h - 13 PCI in conflict

  Hello!

  Some info:
  OS: win Vista Home Premium 32 bit
  BIOS: 3.30 - WIN

  After one of the windows updates after I restarted my laptop I get errors:
  --------------
  ERROR
  Resources - Bus controller conflict series PCI on the motherboard
  Bus: 09, device: 01, function: 00
  ERROR
  Resources - Bus controller conflict series PCI on the motherboard
  Bus: 09, device: 01, function: 01
  ERROR
  -Conflict PCI on the motherboard resources
  Bus: 09, device: 01, function: 03
  --------------

  With F1, I just confirm and the system to boot normally. But then I realized that firewire card and multi drive no longer works. I checked under devices and I have problems with the following devices:
  ----------------
  IEEE 1394 Bus host controllers
  -OHCI Compliant IEEE 1394 Host Controller (not enough resources)
  Other devices
  -Conroller of memory PCI (no driver installed)
  -Controller of Bus SM (no driver installed)
  ----------------

  I tried to:
  -cancel the last windows update,
  -load the bios default
  -reset the bios with remove the battery from the motherboard and waited for 1 hour
  -the latest version of the bios reflash,
  -Reinstall everyhing Rescue CD.

  Nothing helps. Errors are always present.

  Y at - it something more, that I could try o or is it the failure of the motherboard?

  Kind regards
  Sasa

  > Is there something more I could try o or is it the failure of the motherboard?

  Well, if you have already tried to restore the system using the disk recovery Toshiba (your written you already tried this procedure) and this did not help to resolve the issue, the problem could be linked to the fault of the motherboard.

  The resource conflict error message indicates that certain devices (part of the motherboard) causing the problem.
  In your case, it s PCI Serial Bus controller.

  From my point of view of the few there are not many options for repair.
  I think that the motherboard must be replaced. :(

• Resource conflict error

  Hello

  I'm using LabWindows at distance contorl the CMW 500.

  I use WCDMA in car since the R & S to run CMW 500.

  When I activate the Multi evaluation mode to see the result of the test.

  It keeps displaying "conflict resources".

  I'm not really sure to know the reasons that I'm "conflict resources".

  I don't think I put false entries... (or I call the additional function of LabWindows to control the CMW 500?)

  is there a reason of possiable that I made mistake in LabWindows?

  Thank you

  Hi pc486,.

  Is it possible that the material resource is already booked and we try to access it at several places? Would you be able to post a screenshot of the error code? LabWindows/CVI has not all the additional functions that are called, standard running C code.  Also, I found a driver in our network of Driver of Instrument which can be useful. This was not written nor supported by National Instruments, but it can be useful.

  CMW500: http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=15501

  Kind regards

  Jason D

  Technical sales engineer

  National Instruments

• DeskJet 3520: Conflict between the size of the paper, recto verso and settings without borders

  With the borderless printing option on in the print preferences, my printer prints pages with margins that are too wide. So I tried to turn this setting off. However, my computer said that there is a conflict between my "Flip on Long Edge', 'Letter' and"Borderless printing"paper size options. Is it possible to have it all at the same time?

  Hello

  Automatic duplex printing requires your printer increase its margins for the duplexer inside the printer to retrieve the page and flip it around.  It is a function of the printer and can not be changed therefore you cannot print without margins in auto duplex.

  Kind regards.

• Activation of NI-Visa - save the conflict Manager settings

  Hello!

  I have a few problems with the activation of NI-VISA 5.2 in NI MAX (see screenshot in attachment).

  I'm usng Labview 2009 and Win7. I guess that you will need a lot more information on my system.

  It seems the Message that prompted, it could be related to some kind of permission while saving the settings, but this problem has not risen in other areas of NIMAX.

  Initially, Agilent Visa was installed with NI-VISA 5.2 and the old one has been activated in the conflict Manager.

  After that, I installed NI 2 488 3.1.1 drivers and when later I had to activate NI-VISA, I ran across this problem.

  (I don't know if, before the installation of NI488 that I could move to NI-VISA, I didn't try right there)

  I uninstalled Agilent Visa, I installed NI-VISA 5.3, repaired, 5.3 uninstalled, reinstalled 5.2 but I am always faced with the same command prompt.

  Thanks for any help!

  Hello

  Try reading the following KBs, they should be useful to address the problem.

  Using NI-VISA 5.2 or higher with the of Agilent E5810A LAN/GPIB gateway

  http://digital.NI.com/public.nsf/allkb/C6ADD4D65354570086257AA1002F5F67?OpenDocument

  Configuration of NI-VISA as the first VISA

  http://digital.NI.com/public.nsf/allkb/B283196340462DFD86257633006DC799?OpenDocument

  Best regards
  D. Enrico

• Problem of "Conflict with emulation software detected" - I can't run my game!

  Hello
  I have a problem running my game, SimCity Societies Destinations expansion pack. When I click on the shortcut, a window pops up saying "conflict with emulation software detected. I can't play my game, and I want too! : D any help will be good... And I have windows XP.

  Hi ArtyomKarapetov,
   
  Here is a post that might be useful. Follow the steps and check if it helps to fix the problem:
  http://simcitysocieties.EA.com/community/forum/messages.php?ThreadId=c3d4c2f4710ffebb925b393e7b5485ba&directoryID=214&startRow=1&openItemID=item.214
   
  If this is not enough, post your request in the Simcity forum to improve assistance in this regard.

• Windows XP SP3: There is an IP address conflict with another system on the network.

  As mentioned, I am under Windows XP SP3.  Starting around June 14, 2011, I get this error message: "There is an IP address conflict with another system on the network."  I didn't any problem access the internet, which is weird considering all the forums I've read the user has had problems with this.

  I followed the steps to solving this problem.  I checked the IP addresses on all devices connected to my network. none match the computer, I get this message.  I tried refreshing and renew my address this computer's IP, but that has not solved the problem.  I've updated my modem drivers; who has not solved.  I checked the settings on my router but nothing.  I have turned off all devices in the House connected to the network, unplugged both the modem and the router, plugged the modem back in (anticipated for a constant signal), then plugged the router and gives him the time, but I got the message again.  I ran scans anti-virus and anti-malware, but neither picked up something.

  I am out of resources in this regard.  I guess that something might be wrong with the router, but that doesn't seem right.  I had no problems with the router as I bought it a year ago, and as I mentioned there are no connectivity issues (always as fast as I'm willing to pay my provider).  Two things have popped up in my mind that could possibly impact this: all about 14, there was a Windows update that has pushed down and the message began not to burst, until, after downloading (but I have not had this same problem on other computers that have received these updates) , and there was a very, very brief power surge (second meaning) in the House around the 16th which caused no (to my knowledge) do anything stop but not a hand a few clocks.  Thank for any help with this!

  No. except if you must move the computer to another network or if you are not actually that responsible for the network.

  As long as you are in charge of your network, you can configure your router to reserve an IP for your machine OR set up so that the DHCP range is, for example, all the IP addresses above to x.x.x.100 and you you give an IP address below that (say x.x.x.99).

  In the first case, you let your computer configured as DHCP - your router just recognize it and gives this machine (and only this machine) reserved IP address.  For the latter, need to change the settings in Windows after changing your router so the DHCP range does not interfere with the static IP address range.  I would say that the latter is more likely to be a problem than the first, especially if there is a chance that this machine moves from one network to the other.

  Personally, I use the booking method on my home network.  In this way my laptop, iPad, etc. all get a given IP address every time (an I know) and I have to set up the real device special somehow.

• Address IPCONFIG auto cannot locate my Ip address. Other computers on the WIFI at home have problems of "IP address conflict address" How can I fix

  Auto IPCONFIG can find 169. addresses. My IP BigPond do not answer to 169. I force the IP to get internet now. I'm trying to return to power enable all desktop computers 3 and 5 laptops (all windows) to use WIFI that we used to be able to 2 months ago. BigPond advise me to get in touch with Microsoft on 132058 and I can only do this Mon - Fri 9.00 - 5.00 which is extremely difficult so that an employee who works 12 hours. After hours of contact would be much more preferable. How can I have my computer 'automatically' identify my IP without forcing the numbers. When I force the IP on the other computers on the home WIFI network they can not access the internet due to a "conflict with an IP address. They should automatically be able to identify and define the same IP address as the primary computer without problem. How can I fix?

  It seems much more likely that the fault is in your TG782T on Windows.

  Either way, a 'normal' router will work with many more than 4 Ethernet ports (though most only have a maximum of 4 physical Ethernet Sockets) and more than 5 wireless connections.  It is therefore likely that your ISP has "customized" your device in a way that limits the number of connections - and it is probably this "customization" that gives you your current problems.  It will be a little difficult to do this via an Internet forum (rather than sitting in front of your computer), but it should be possible.

  Please specify the following sentence: "disconnect this computer and try a new computer is always the same problem as the gateway must always have this setting, this computer in IP."  What is "this setting of intellectual property?

  In the area of local connections > Internet protocols (TCP/IP), how is the 'work' computer configured?  Normally, it would set on "Obtain an IP address automatically."  What was the setting of 'alternative' that your ISP you are trying?

  The first thing to do is to get information on your work computer.  Follow these steps:

  1. click on start, and then type the three letters cmd in the run box, and then click OK.
  2. Enter the following command and press ENTER:
  ipconfig/all > "% UserProfile%\Desktop\ip.txt" {Enter}
  3. open the IP.txt file to your desktop
  4. copy and paste the text into your response.

  One of the lines in IP.txt will be something like the following:

  ... Default gateway. : 192.168.1.254

  This number is the IP address of your router.  Open a web browser (Firefox or Internet Explorer) and enter the IP address of your default gateway in the address box.

  At this point, it is possible that it will ask you a user name and password.  If you did not one, use admin as username and leave the password empty box.  If this does not work, there is a way around this, but it involves several phone calls from your ISP.

  Unfortunately, the only manual for the TG782 I could find is terribly incomplete. http://www.thomsonbroadbandpartner.com/GetFile.php?id=6978

  After login, you should see a page with a menu on the left (see p. 26 of the pdf above thomsonbroadbandpartner).  Click on the entry for "Home Network."  Unfortunately, the manual does not show the screen that appears when you enter this part of the configuration utility.  What you are looking for are the settings for the DHCP server on the router, which assigns IP addresses to computers connected to the router (no matter if they are connected by wire or wireless).

  Because the manual for your TG782T is not describe it, take a look at this, which is a part of the Linksys WRT54G Router configuration utility:http://cid-18b259158254905b.office.live.com/self.aspx/.Public/router%20setup.jpg

  Under the Network Configuration, the local IP address is set to 192.168.1.1.  On your router, the default value for this entry is 192.168.1.254.  Just under which are entered for "DHCP Server" "" starting IP address"and"Maximum number of DHCP users."  Here are the settings that you want to search.  The two critical parameters, as regards your current problem is are (1) the server DHCP must be "enabled" and "(2) the number of DHCP users Maximum" must be equal to or greater than the total number of computers that you want to connect (wired and wireless).

  Sorry I can't give you more specific instructions.  Usually, the user guide for the router will display all the available screens in the router configuration utility... but not this one.

• Vista SP1 x 64 SMBus Controller on a P5W DH Deluxe resource conflict

  I discovered there is a resource conflict issue reported through the Manager Windows (Vista SP1 x 64) devices.

  The message is of e/s series 0400 - 041F used by: resources from the motherboard.

  Anyone know how to resolve this conflict?

  Regards, Mac

  P.S. I used a live CD of linux and I have no problem with the hardware, most all my drivers are up to date.

  Returns the motherboard to Asus, under warranty. Other issues discovered, defective RAiD, USB port... So, to conclude, it was a hardware failure.

  Thank you for your help.

• Recurrent BSODS even after the repair facility. Hardware failure? Driver conflict? Help, please!

  I was troubleshooting my BSOD for about a week and I need help.

  Here's where I am. I cleaned the chassis and reinstall all components. Then I ran memtest for 8 passes without error. Then I got Majorgeeks through my dieting rigorous anti-malware. And there is no malware on the computer.  I could not find any obvious driver conflict. So I ran SFC/scannow and it found some errors, he couldn't fix. So I finally did a repair installation to see if file system cleaning would eliminate blue screens.

  I always get a BSOD.

  Which leaves me with what? A bad GPU? Unknown driver conflict? Bad motherboard?

  Here comes bluescreenview log for you to look over. If someone could help me please clarify, I'd appreciate it really any help I can get.

  Thank you.

  ==================================================
  Dump file: 073014-27892 - 01.dmp
  Crash time: 30/07/2014-15:26:46
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x0000000a
  Parameter 1: 00000000'00000088
  Parameter 2: 00000000'00000002
  Parameter 3: 00000000'00000001
  Parameter 4: fffff800'03656666
  Caused by the pilot: NDProxy.SYS
  Caused by the address: NDProxy.SYS + c8856a
  File description: NDIS Proxy
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7601.17514 (win7sp1_rtm.101119 - 1850)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\073014-27892-01.dmp
  Number of processors: 6
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 286 280
  Dump of file time: 30/07/2014-15:27:42
  ==================================================

  ==================================================
  Dump file: 073014-27892 - 01.dmp
  Crash time: 30/07/2014-15:26:46
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x0000000a
  Parameter 1: 00000000'00000088
  Parameter 2: 00000000'00000002
  Parameter 3: 00000000'00000001
  Parameter 4: fffff800'03656666
  Caused by the pilot: NDProxy.SYS
  Caused by the address: NDProxy.SYS + c8856a
  File description: NDIS Proxy
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7601.17514 (win7sp1_rtm.101119 - 1850)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\073014-27892-01.dmp
  Number of processors: 6
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 286 280
  Dump of file time: 30/07/2014-15:27:42
  ==================================================

  ==================================================
  Dump file: 080114 43243 - 01.dmp
  Crash time: 08/01/2014 12 h 22:50
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x0000000a
  Parameter 1: 00000000'00000088
  Parameter 2: 00000000'00000002
  Parameter 3: 00000000'00000001
  Parameter 4: fffff800'036 has 3666
  Caused by the driver: vga.sys
  Caused by the address: vga.sys + 2a7f56a
  Description of the file: VGA/Super VGA video driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\080114-43243-01.dmp
  Number of processors: 6
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 285 832
  Dump of file time: 01/08/2014-12:24:17 AM
  ==================================================

  ==================================================
  Dump file: 080114-29359 - 01.dmp
  Crash time: 01/08/2014-16:14:11
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x0000000a
  Parameter 1: 00000000'00000088
  Parameter 2: 00000000'00000002
  Parameter 3: 00000000'00000001
  Parameter 4: fffff800'03663666
  Caused by the driver: USBPORT. SYS
  Caused by the address: USBPORT. SYS + 1156 has
  File description: driver Port USB 1.1 & 2.0
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\080114-29359-01.dmp
  Number of processors: 6
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 286 344
  Dump of file time: 01/08/2014-16:15:09
  ==================================================

  ==================================================
  Dump file: 080414-142319 - 01.dmp
  Crash time: 08/04/2014-21:24:14
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x0000000a
  Parameter 1: 00000000'00000088
  Parameter 2: 00000000'00000002
  Parameter 3: 00000000'00000001
  Parameter 4: fffff800'03662666
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 75bc0
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7601.18409 (win7sp1_gdr.140303 - 2144)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\080414-142319-01.dmp
  Number of processors: 6
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 286 544
  Dump of file time: 04/08/2014-21:25:25
  ==================================================

  Thank you!

  IRQL_NOT_LESS_OR_EQUAL (a)

  This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high. The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  Bugcheck A, {88, 2, 1, fffff80003662666}

  0: kd > k
  Call child-SP RetAddr site
  fffff800'00b9c038 fffff800'03681169 nt! KeBugCheckEx
  fffff800 '00b9c040 fffff800' 0367fde0 nt! KiBugCheckDispatch + 0 x 69
  fffff800'00b9c180 fffff800'03662666 nt! KiPageFault + 0 x 260
  fffff800 '00b9c310 fffff800' 03685df3 nt! KeInsertQueueApc + 0x42
  fffff800 '00b9c370 fffff880' 04a96f16 nt! IopfCompleteRequest + 0xb63
  fffff800 '00b9c460 fffff880' 04a64fb7 usbhub! UsbhPdoInternalDeviceControl + 0x4fe
  fffff800 '00b9c4b0 fffff880' 014da2b0 usbhub! UsbhGenDispatch + 0 x 57
  fffff800 '00b9c4e0 00000000' 001eed06 ffusb2audio + 0x52b0
  fffff800 '00b9c4e8 fffff880' 016884ba 0x1eed06
  fffff800 '00b9c4f0 fffff800' 0368c85c tcpip! TcpPeriodicTimeoutHandler + 0 x 714
  fffff800 '00b9c570 fffff800' 0368c6f6 nt! KiProcessTimerDpcTable + 0x6c
  fffff800 '00b9c5e0 fffff800' 0368c5de nt! KiProcessExpiredTimerList + 0xc6
  fffff800 '00b9cc30 fffff800' 0368c3c7 nt! KiTimerExpiration + 0x1be
  fffff800 '00b9ccd0 fffff800' 036798ca nt! KiRetireDpcList + 0 x 277
  fffff800'00b9cd80 00000000 00000000' nt! KiIdleLoop + 0x5a

  ffusb2audio.sys (driver of USB 2.0 audio Focusrite) refers to an invalid memory (0000000000000088).

  0: kd > lmvm ffusb2audio
  start end module name
  "fffff880 ' 014 d 5000 fffff880 ' 014e7000 ffusb2audio T (no symbol)
  Loaded symbol image file: ffusb2audio.sys
  Image path: ffusb2audio.sys
  Image name: ffusb2audio.sys
  Timestamp: Wed Oct 13 11:40:18 2011

  Very old driver, I recommend just completely uninstall the software and remove the device (if any).

  Kind regards

  Patrick

• Conflict of ATI with Windows, leading to the display driver crashes

  I have a matter of course on my new system. At first, I thought it was the video/hardware related, but now I'm leaning towards whether a conflict with Windows. However, I have no way of tracking it.

  Question: my screen is going to die randomly when running intensive applications Aero, games, etc. Everything will work fine for a while (anywhere), but then the clicker from desire to screen and the display will be turned off. On the screen, I see a series of vertical bars of white with a color background. It does not seem to lock the computer, as I hear it still go sound background for once; the computer restarts finally if I leave alone long enough.

  This is all performed on a new install of Windows 7 x 64, Vista Business 64 upgrade. Temperatures on the map of all read as usual and there is no errors appear in the event viewer after that I reload. Apart from the critical error "unexpected stop.

  When this first started happening, I contacted XFX Support for the video card. They had me uninstall the ATI drivers, run driver Sweeper and reinstall drivers. This seemed to solve the problem until Tuesday, when Windows Update installed KB977074 - a completely independent update of video - and then errors started happening again.

  After an adjustment with the restoration of the system, I tried to format the drive and start again. After getting Windows 7 x 64, I started to install programs one by one, checking after each installation to see if I could create the error again. Everything was going well until I reached a program that Basic Visual C++ 2005 Redistributable Package (x 86) installed. Once the error began to occur after that, I uninstalled programs and did a system restore before installing the package.

  The computer had already installed the C++ 2008 (x 64) package, and has worked once the 2005 32-bit package has been deleted. However, most of the programs that I want to use, and most of the GAMES for that matter, require the package of 2005 must be installed. So I re-installed and removed the 2008 package. thinking that it was a conflict between the two (/ straws), but it did nothing. Returned errors and I got a while back to square one, hiding on the last stable the system restore point.

  I don't know if I'm still on a conflict driver, hardware problems, or if the C++ packages are some how messing my system. I don't put much faith in the second, because I do not think that the first scan with driver Sweeper would have so much success, only to be later taken by a totally independent Windows Update file.

  So, to save my sanity. I've been looking through past posts and didn't find any error similar to mine, so I'm pretty sure this isn't another repost. However, if I managed to miss something, please point me to the right post.

  I have a my dxdiag output upward on pastebin; http://pastebin.com/f7e9f05c7  It was a little to long to post here.

  Hey David,

  Please check the safe mode and see how it goes.
  To start in safe mode, see:

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Also, try a lower resolution or check taken resolution supported by the video card.

  Reference:

  Change your screen resolution
  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  In addition, I recommend that you try another monitor to check the issue and also check if the problem persists when you connect the monitor to another PC.
   
  In addition, please check the system requirements for Microsoft Visual C++ 2005 Redistributable Package (x 86): Windows 2000 Service Pack 3; Windows 98; Windows 98 Second edition; Windows ME; Windows Server 2003; Windows XP Service Pack 2.

  For further assistance with installation: Microsoft Visual C++ 2008, see:
   
  MSDN: Visual C++ General
  http://social.msdn.Microsoft.com/forums/en/vcgeneral/threads

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.